hello,
i have a qtek s200, spl 2.20.0001.
i've been trying to hardspl/upgrading to wm6 for a couple of days now.
have tried every possible way i could find on this forum (and others).
tried the kaiser v1, jumpspl, update package, prophet tools, ...
nothing works for me.
i always get the white screen the second i press continue on my device or when i click ok on my pc.
i can hear the device rebooting, because my usb connection gets reactived when i wait, watching the white screen.
after a while i even get my activesync connection back. but always in white screen. when i softreset the s200 i still have the spl 2.20.0001.
i even tried upgrading it to another rom in the white screen and then i get stuck in the bootloader, which means i have to re-install an official qtek-rom.
help me!!! what should i do to be able to use wm6 on my device??
thanks a lot in advance. appreciate it it! a lot!
greetz
never mind ...
followed the instructions on the G4forum and it works (for) now.
sorry. thx for those who read my question anyway.
greetz
Hello All
my work has 100 mda vario's
but they all had windows mobile 5.1 on it
so i say to my boss i can flash it to windows mobile 6 with htc touchflo
he liked it so he let me do it
but it goes wrong
the mda vario does nothing anymore
just a bootloader cames up with : red green,blue,white
saying :
ipl 2.21.0001
spl 2.21.001
my idea is to get a working rom on a mini sd card and flash it from the sd card
but how to let the sd card starts load and let it flash,
not one button works in the bootloader
i have tried a lot of tricks i also have one time get restore to factory defaults.
but wont work, it says format completed, so no error's
thats good i think
but i really need to fix it.
otherwise my boss wont be happy
also active sync wont work anymore , the pc wont see the phone all .exe updates ultilty gives me errors that they dont get response from the phone
that comes because it only stays in the bootloader and the bootloaders has left under a usb sign, there stood usb
can this be fixed?
any help plz
Regards
R.G
hi there... 2 bad is the boss phone!!!
hi there... 2 bad is the boss phone!!!
first of all, try a hard reset, then plug once again the phone to PC
dont worry, activesync wont recognize phone at all (is just usb connection)
tell me if hard reset worked, and ill keep in touch
i kpnw there is a tool that would help you to fix the phone.... first try the hard reset!
Good luck
I got the same problem, the hard reset works, but the problem is there yet.
Ich hab das gleiche Problem, der Hard reset funktioniert, das Problem besteht jedoch weiterhin
Hello All
Thanks for u responses i like that
okay hard reset works
but nothing has changed by that
hard reset is the question with restore to factory defaults?
and than i get a screen with format complete.
Regards
R.G
hello All
i fixed it
i know get a green screen with ipl,spl, os
but everything is terrible slow
really slow i mean when i press start it takes a minute to show up
why is this?
plz help
i fixed it with abort all processes in task manager and use wizard love rom.
this is the only possible way i think
regards
R.G
R.G
You know what you did,whats wrong with the phone,you flashed a wm6 rom to a CID locked device.A CID locked phone cannot be upgraded to wm6,you must have a CID unlocked device for upgrading to wm6.
Now,as its a G4 device,it cannot be CID unlocked,but,however,it can be upgraded to wm6 through either SoftSPL or HardSPL method.
Now first recover back to its default status by downloading official stock rom and flash it,after it starts to work normal,then follow the SoftSPL or HardSPL method,only then it'll upgrade.
Hello,
used michys rom 6.1, works well. by upgrading to 6.5, upgrade stops at 92%. over and out..
I checked out to fixe it with the methods from xxacsxx, but still get : can´t synchronize with host, after use ´lnbs ...etc´ from mtty.
mtty also shows no info 2 page, interpret timeout.
I tried athena-unlocker again, it says not useabale for my device.
I also tried to upgrade with different rom, vanilla, michy, original t-mobile, chinese and uk.
I only com to the bootloader. Most rom-Updates say just :not for you phone, vannila and t-mobile say: wrong device id.
but this means i have to fix it via mac/mtty, or not ? and this does not work..
any ideas ? the bootloader screen is awfull beatyfull, but wm6 was it also...
thanks for your help,
Doktor.Wahnsinn
moin...
have you tried to flash any rom again? sometimes it helps you flash an original rom.
look at my page for info >> http://xacsx.de and original roms
doktor.wahnsinn said:
Hello,
I checked out to fixe it with the methods from xxacsxx, but still get : can´t synchronize with host, after use ´lnbs ...etc´ from mtty.
I also tried to upgrade with different rom, vanilla, michy, original t-mobile, chinese and uk.
Click to expand...
Click to collapse
i think you are this one i meant with the page xxaxsxx ? i checked all your roms, no positiv effect. i also tried nearly any rom, i got in my hands..
No Rom works, but i still came to the bootloader and can connect via mtty...
any further ideas ?
Thanks,
Doktor.Wahnsinn
..any ideas ?
i can´t update the device id. can´t synchornize with host at mtty; means this with host the athena, or the file-source,the pc ?
i´ve got no more ideas..
doktor.wahnsinn said:
..any ideas ?
i can´t update the device id. can´t synchornize with host at mtty; means this with host the athena, or the file-source,the pc ?
i´ve got no more ideas..
Click to expand...
Click to collapse
what method are you trying exactly? try my wifi mac/modelid fixer (stickied). follow instructions.
Hi cmonex,
I tried meanwhile different methods, all came to the same result:
1. xp,use mac1.exe, create bin for 1.2,rename to mac.bin and put in on c:\->deactiving wcescomm,mtty0512 (on c:\)->use usb-connection,connect->task32-> Level 0->lnbs mac.bin 75108000.
2. xp,use mac1.exe, create bin for 1.2,rename to mac.bin and put in on c:\->deactiving wcescomm,mtty11a (on c:\)->use usb-connection,connect->task32-> Level 0->lnbs mac.bin 75108000.
3. xp,use mac1.exe, create bin for 1.2,rename to mac.bin and put in on c:\->deactiving wcescomm,mtty142 (on c:\)->use usb-connection,connect->task32-> Level 0->lnbs mac.bin 75108000.
that´s it, no dialog box opens, no ok button appears, only after a few seconds: can´t synchonize with host.
For your information: your procedure works one year ago fine, as my device crashed during a rom-update. Do as you said, everything works well. But now after the crash during update to 6.5 this disaster.
Hope it´s not the end and the flash is broken...
greetings,
Doktor.Wahnsinn
if your bootloader shows the right informations, then use the sd-card-method (no sdhc).
it shows you, whats wrong (look at your (grey)screen). i have flashed my ameo for 500 times, a lot of crashes will be fixed with this method.
(mein englisch ist miserabel, weiss ich. beim flashen über die sd-karte zeigt das gerät alles an, was ok und was nicht ok ist. wenns geht ist gut, wenn nicht, dann wissen wir aber warum)
Hi,
i think my english is miserable, too.
Aber deutsch ist auch gut, aber nicht für dieses Board..
Ich werde es noch einmal mit sd-karte probieren, ich benutze das T-MOB005signed.nbh.
..i try it via sd-card with the t-mobile rom T-MOB005signed.nbh.
thx for brainstorming, i will post results.
greeting,
Doktor.Wahnsinn
it loads, then appears in red letters on the grey screen
00058002
and it starts up to the bootloader tri-color..
well frustrated..
..have a good night,
Doktor.Wahnsinn
you have to rename the *.nbh to ATHEIMG.nbh
make sure that your sd-card is not an sdhc-card (i think thats all cards over 4 GB)
HI,
I have renamed the rom-file correct; also i used a 2 GB SD Card..
greetings Doktor.Wahnsinn
..i tried 5 different sd cards, Sandisk,Kingston,Transcend from 512mb to 2 gb, also again all my available roms, always the same.. The fact that all card where functional under windos while the unit was ok it not important in this state of ´bios-booting´ or not ?
any further ideas ?
best greetings,
Doktor.Wahnsinn
Hi Doktor,
Did you solve the problem?
I have the same issue. I cannot upgrade with sd (formatted 1gb sd card with 2048 cluster size in FAT32).
I have to upgrade via SD card because i upgrade with wrong version (i have a 7501 and i did a upgrade with 7510 )
Thanks
Nelson
Can you please provide more info regarding what is displayed on Bootloader screen ? A screenshot/picture would help a lot mate
do you see:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
or something else ?
hi ,green screen with horizontal lines came up with missing gsm line on my prophet while flashing with wm6.5 21234 ,then i tried to put gsm file and it stopped at boot screen tricolor one so i returned back to nvid wm5 which flashed it till 95% and gave an error at 100% and rebooted to tricolor again where i clicked on ruug4 file in update hardspl folder and after this it made reboot to wm5 (but wifi didn't work) so i gave it hardspl in updatehardspl folder and later flashed it with wm6.5 but wifi doesn't work and 1st splash screen is ok but second splash screen never shows up (instead green horizontal lines with ipl spl gsm and os come up and later 3rd splash screen comes up) wifi is not working in wm5 or wm6.5 with comm manager or quickmenu either.
has wifi hardware got spoilt ?(is there anyway to test it or correct it)
i have flashed to wm5 to wm6.5 twice to make sure i wasn't doing anything wrong.
also i tried alot of splash screen files but second splash screen remains those horizontal green lines only.
green lines liook like this http://www.dragoncub.net/htc/mda/boot.jpg
wifi is important to work.(green lines are acceptable unless they are interlinked with wifi)
kamalneet said:
hi ,green screen with horizontal lines came up with missing gsm line on my prophet while flashing with wm6.5 21234 ,then i tried to put gsm file and it stopped at boot screen tricolor one so i returned back to nvid wm5 which flashed it till 95% and gave an error at 100% and rebooted to tricolor again where i clicked on ruug4 file in update hardspl folder and after this it made reboot to wm5 (but wifi didn't work) so i gave it hardspl in updatehardspl folder and later flashed it with wm6.5 but wifi doesn't work and 1st splash screen is ok but second splash screen never shows up (instead green horizontal lines with ipl spl gsm and os come up and later 3rd splash screen comes up) wifi is not working in wm5 or wm6.5 with comm manager or quickmenu either.
has wifi hardware got spoilt ?(is there anyway to test it or correct it)
i have flashed to wm5 to wm6.5 twice to make sure i wasn't doing anything wrong.
also i tried alot of splash screen files but second splash screen remains those horizontal green lines only.
green lines liook like this http://www.dragoncub.net/htc/mda/boot.jpg
wifi is important to work.(green lines are acceptable unless they are interlinked with wifi)
Click to expand...
Click to collapse
1. It sounds like the disk partition was being disturbed with a fault address,
2. you are lucky that your Prophet is still alive,
3. try this official rom upgrade from dopod (uploaded ) (WM5, may be useful... , it won't brick you device for at least )
dioxda2 said:
1. It sounds like the disk partition was being disturbed with a fault address,
2. you are lucky that your Prophet is still alive,
3. try this official rom upgrade from dopod (uploaded ) (WM5, may be useful... , it won't brick you device for at least )
Click to expand...
Click to collapse
thanx mine is imate jamin G4 so would it be right to put in this dopod rom and is it G4 ,i also have original imate jamin rom which usually doesn't run because i made all these wm6.5 changes.
also battery is being used very fast now unlike before.
Edit:yours gave error when i put jamin original it stuck up at 100 % i rebooted to tricolor and the clicked on ruug4 in hardspl folder and then again rebooted to wm5 for 3rd time this time. and no wifi ...then wm6.5 and no wifi .
i guess wifi hard ware and second splashscreen area got spoilt .
Edit battery is ok but wifi is not .
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.