Related
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
Has anyone been able to successfully connect DUN over BT using wmodem? I have installed the addon cab and can find the DUN connection when pairing my phone with my laptop, but when I go to connect it gives me a 678 error. I have no problems connecting wmodem over USB or using "Internet Sharing" to connect cover BT and USB.
dun
Had issue with wmodem but Internet Sharing that was on my custom rom works like a champ. I'm pulling 1.0 to 1.2 Mbps almost all the time. I can't remember if it was on my stock rom, but if not, I'm sure it's available somewhere on here.
Nate
i was just about to do a search on this. then i scrolled down the list and found this post. I'm very interested in getting BT DUN working on my Mac, since you can't use USB.
If you find an internet sharing cab, can you post here?
Thanks.
yeah i do not mean to hijack your thread but when i try to tether via bluetooth to my new macbook with internet sharing, the internet connection crawls!! i mean CRAWLS!!! lol
I have BT and USB connection with a windows laptop and it runs perfect. any ideas on how to speed up the connection?
Thanks!
http://www.wmwifirouter.com
this is really the best solution if you want to connect to a Mac. Works perfect and is worth the money! Hella fast too when connecting through WiFi. But you have the option to connect through WiFi, Bluetooth & USB.
When I connect through WiFi, I'm getting 1.2mb down and 500kb up.
It worked great for a while about a month or 2 ago when I bought it. But then I was playing with the Mac network settings and stuff and managed to jack it up. But here's what I was doing wrong:
Connecting through WiFi, there is open & wep. I chose wep. So on WiFiRouter you select your wep password. I chose a simple word, let's say "keyboard". On the Mac when you select to connect wep, using keyboard for the password won't work. You need to enter the 20 digit hex value that WiFiRouter gives you after you put in the password "keyboard".
Hope this helps anyone who might have problems setting it up. I didn't change any settings on WiFiRouter. Works right out of the box. You just have to make sure you set it up correctly on the Mac.
I use ICS over Bluetooth all the time. works great.
I now have ICS. Unlocked my HTC Touch Pro and used Scott Scrosler's ROM. But I'll most likely use WiFiRouter since it's about 3-4X faster going through WiFi. Need the speed for VPN.
I have an HTC Touch Pro and an asus eee pc and have tried and searched everywhere to figure out how to bluetooth pair these two, but I've had no luck. I can USB pair just fine with Internet Sharing. Has anyone had success with this? I'd rather go the free route than spend the $ for wmwifirouter, if possible. TIA
Well on W7 at least all I have to do is select Bluetooth as my connection option in ICS and then right click on my phone in the Bluetooth Devices window on my PC and go to where it says "Join PAN" and it connects faster than it would by USB. The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting. But GRemote works from like 25 feet away.
Internet Sharing NO Registry Edit Needed
Hi. For those with ATT FUZE Stock Rom
I got this CAB (ICS INstaller) from a website with a topic of the last free version of WMWifiRouter by chainfire, just install the CAB and it will enable Internet Sharing, and NO registry edit needed.
As far as I remembered this is needed in order to use Internet Sharing and also if you want to use WMWifiRouter by chainfire.
Enjoy.
hidavi said:
The range sorta sucks though. Has to be within like 5 feet to keep from disconnecting.
Click to expand...
Click to collapse
I'm facing a lot of disconnects using Bluetooth PAN, however over USB works great! If I have to use the cell phone near the computer, I'd rather use the cable.
I only wanted to use bluetooth because I could put the cell phone near the window which is where I have better signal when I'm on the mountains with GPRS-only..
Hi everybody. Now that I have rooted my mini I could install Barnacle wifi tethering for connecting to my laptop. But after long trials I am still not able to connect my phone with my laptop.
Can anybody with prior experience help me in this regard
For wired tethering I use Easytether which works great.
I havent tryed yet, but try setting the WLAN interface to "tiwlan0" and/or try skipping wpa_supplicant
Regards
Bin4ry
Bin4ry said:
I havent tryed yet, but try setting the WLAN interface to "tiwlan0" and/or try skipping wpa_supplicant
Regards
Bin4ry
Click to expand...
Click to collapse
Wonderful. It is connected with your suggestions. Many thanks.
Partha
Thanks, I also got this to work. What I wonder now is if it is possible to have security for this tether. When we choose skip wpa_supplicant then the security is disabled and it is an open network. When traveling and visiting public places I would be somewhat uncomfortable to have this open network. Barnacle does provide the WEP security option, but in order for this app to work with the x10 mini we need to choose skip wpa_supplicant which opens up the network to all. Any ideas?
I had to change WAN-setting & disable security too to even find the WiFi network.
However, when I connect it doesn't work. I see the in Barnacle "traffic"-pane that my computer sends requests when I try to load a webpage in the browser. But the down-traffic won't increase. Anyone know the next step in troubleshooting?
i left all the settings stock except turned on skip wpa supplicant. mine works great i ran ping- t all night and only lost 15 packs 0% loss, which is less loss than my friends cable internet.
when i first got it working i was using a mix of settings and i had to hit associate every 5 min or my laptop would stop having access to the internet but still remain connected to the network. so i just reinstalled it and it works great now.
This feature is one of the main reason why i bought an android device.
Edit:
after a few more days of pissing about with barnacle i realized that it cuts out when ever the phone is not being charged and falls a sleep and as long as i keep the phone awake its fine. the solution i came to was to open music player and play a song with the volume off and that keeps the phone from going into sleep mode. i know there's supposed to be a setting to stop wifi from turning off while in sleep but i have a branded rom and it doesn't appear i have the option. hope this helps someone.
There are two versions out there, 0.4.2 and 0.5.0. What version do you guys run?
anyone share the settings for barnacle wifi tethering. Its not working in my rooted x10 mini.
nate340 said:
i left all the settings stock except turned on skip wpa supplicant. mine works great i ran ping- t all night and only lost 15 packs 0% loss, which is less loss than my friends cable internet.
when i first got it working i was using a mix of settings and i had to hit associate every 5 min or my laptop would stop having access to the internet but still remain connected to the network. so i just reinstalled it and it works great now.
This feature is one of the main reason why i bought an android device.
Edit:
after a few more days of pissing about with barnacle i realized that it cuts out when ever the phone is not being charged and falls a sleep and as long as i keep the phone awake its fine. the solution i came to was to open music player and play a song with the volume off and that keeps the phone from going into sleep mode. i know there's supposed to be a setting to stop wifi from turning off while in sleep but i have a branded rom and it doesn't appear i have the option. hope this helps someone.
Click to expand...
Click to collapse
You can disable wifi sleeping on Settings -> Wireless controls -> Wi-fi settings. Push menu button and choose 'Advance'
Sent from my U20i using XDA App
nuire said:
I had to change WAN-setting & disable security too to even find the WiFi network.
However, when I connect it doesn't work. I see the in Barnacle "traffic"-pane that my computer sends requests when I try to load a webpage in the browser. But the down-traffic won't increase. Anyone know the next step in troubleshooting?
Click to expand...
Click to collapse
I have the exact same problem and have tried everything listed here Anyone find a solution??
It works for me now using Barnacle Wifi Tether 0.6.7 and a SE X10 mini 2.1. Had the same problem before. Now my settings are:
Wireless Encryption: Wep Enabled (with hex password code)
Channel: 6
"Skip wpa_supplicant" - unchecked
Wan: tiwlan0
Hi all.
BarnacleWifi worked fine for two weeks but until I setup new android vertion 2.1.1.A.0.6 he doesn't.
Anyone try it with this one ?
Regards,
Devilo.
Edit: I can see the network on windows7 but when I try to connect, it freeze on "Identification" and I never have ip adress
DHCP doesn't work.
Same here :-(.
It finaly works on my mini with 2.1.1.A.0.6 firmware.
On MiniCM-1.0.0-Alpha2, Froyo Cyanogen 6.1 port for the mini "Rom"
Dont forget skip WPA supplicant.
Regards
Devilo.
On X10 mini Barnacle works without skip wpa suplicant! After a few trys and som Observation I found the Problem. Every baconinginterval the adhoc Network have a other MAC. I try to set a fix BSSID in Barnacle but now i can't find the Network so i undo it.
After some Trys i found a workaround:
1. Start Barnacle
2. Press Associate
3. Try to connect with your Computer
4. After entering password, your Computer try to connect, press 1 time again Associate
My Settings are:
WEP Encyrpting: Enabled
Skip wpa_supplicant: Disabled
Auto Associate: Disabled
WAN: rmnet0
still not conneting
It's still not working on my x10mp 2.1.1.A.0.6 firmware. My PC (Debian or Win7 have the same problem) still doesn't connect.
Barnacle on phone is showing no errors. PC is finding the wireless network but can't connect. Looks like it does not get an answer from phone (no IP address assigned).
I surely have tried all the advices from this forum and any google search gave me.
Same problem here guys - this was the reason for rooting my x10 mini
@@
same here..
And I haven't found any solutions yet ... thankful for any suggestions ...
Sent from my U20i using XDA App
Kick for this thread, looking for a solution...
I rooted my phone, and when i try to wireless tether the network shows up on my laptop but it will not connect. Any ideas why this is not working?
Thanks
Disable authentication and give it another try. For some reason, when I setup a WEP key I'm unable to even see the network on my laptop. Once I disabled it everything was working fine.
I was having same issue I tried both the beta version (wifi tether) and the version found in market (wireless tether). The one from market works however, its strange that my laptop when in Windows 7 I cannot connect but when using Ubuntu It works. I am trying to figure out how to get my PS3 and Windows 7 to connected.
The computers network card must be able to handle ad-hoc networks.....AND the drivers must also support it.
Not all cards or drivers do.
I have tried it all both tethers, one called barnical and nothing. It just says computer taking longer than normal to connect and then says it cant connect. I never had any issues on my laptop with my evo. When i first opened the app on my photon it says no access control something about the kernal.
Sent from my MB855 using XDA App
until they make it infrastructure it really sucks and has issues
I am running Nilsp business ics 3.x, s-on as of now, I have been using the Wifi tether app that Nilsp added to the rom with the profile set to Galaxy Nexus (CDMA/LTE) and the routing fix checked, and it works for the most part. What happens is my laptop will be connected to the wifi from the phone but it can't access the internet because it says "limited access" with a little exclamation sign next to it. It is not that the phone is not connected to the internet though because my buddy's iPad will be connected to the internet at the same time and it will be working fine for him. Could be a problem with the phone, could be a problem with my computer, I don't know. My computer will connect to other wifi signals just fine. Very confused on this matter. Anyone got any answers?
Jacrushar said:
I am running Nilsp business ics 3.x, s-on as of now, I have been using the Wifi tether app that Nilsp added to the rom with the profile set to Galaxy Nexus (CDMA/LTE) and the routing fix checked, and it works for the most part. What happens is my laptop will be connected to the wifi from the phone but it can't access the internet because it says "limited access" with a little exclamation sign next to it. It is not that the phone is not connected to the internet though because my buddy's iPad will be connected to the internet at the same time and it will be working fine for him. Could be a problem with the phone, could be a problem with my computer, I don't know. My computer will connect to other wifi signals just fine. Very confused on this matter. Anyone got any answers?
Click to expand...
Click to collapse
probably the laptop:
make sure you don't have any static-ip settings on your wifi adapter. Let the phone get an IP dynamically. Also don't set any specific dns entries either. I had difficulty from both angles if I didn't just let the wifi-tether app dictate the network settings to the laptop.
Also, do you have any custom firewalls on your laptop? The phone defaults to the 192.168.2.0/ network, so it's not the same as your home router, which is probably 192.168.1.0/
My laptop does that as well but the limited access for about a minute or so but then works fine. Im not sure what causes it
Boot to safe mode with networking (f8 on boot up) and see if it connects.
If it works in safemode with networking then you have a firewall issue.
I can assist further if it is the case
Ok so yeah I am haiving the same problem as hardfallen87. I'm sorry but I don't think I completely understand everything you guys have said to try and help. I sort of understand the IP address stuff but I can't find any settings like that anywhere on the computer. And no I do not have any custom firewall installed.
Still haven't really fixed this problem. I'm still constantly getting limited access on my PC from my phone's WiFi tethering app. I am now running Nils Business ICS Sense 4 version 2.6 and am S-off but it seems no matter what ROM I use it doesn't make a difference. Any help is appreciated...
Dalamar1320 said:
Boot to safe mode with networking (f8 on boot up) and see if it connects.
If it works in safemode with networking then you have a firewall issue.
I can assist further if it is the case
Click to expand...
Click to collapse
Seems to work in safe mode ok.