Hi need leo gold card image
Sd serial : FA88007ABA80D51020202044554D531B
Br.
.........................................
okay, heres one, though i havent altered your cid, should it not have the first digits set to 00 or something?
I can make them,, just dont know the cid format.
Let me know and ill try again.
actually, i just read THIS and they recommend trying 00 at the start, so heres one using the 00 cid.
Apparently it wasn't that urgent after all?
shufflez said:
Apparently it wasn't that urgent after all?
Click to expand...
Click to collapse
...but each file got 2-3 clicks.
sad thing that nobody thanks samsamuel for his work!
MAD242 said:
...but each file got 2-3 clicks.
sad thing that nobody thanks samsamuel for his work!
Click to expand...
Click to collapse
heh, they;l be clicking in vain, unless its teh op. Goldcards are specific to a single sd card.
(It may not work anyway, i havent actually tested the generator lately myself, hehe)
Dear Sir,
My CID is: C2A2001E1D3770804732305553445303
i tried the PSAS free goldcard generator but it does not work.
would you please give me the right image on my CID.
Thank you very much.
babak_1274 said:
Dear Sir,
My CID is: C2A2001E1D3770804732305553445303
i tried the PSAS free goldcard generator but it does not work.
would you please give me the right image on my CID.
Thank you very much.
Click to expand...
Click to collapse
RAMJAN
GoldCard image link to your CID
h t t p://w ww. 4sh are d.c om/file/lOxelTTm/goldcard.html[/URL]
Thank you Verymuch Friend.
IT WORKS!!!!!!
Hello. Pllease I need Goldcard for leo too
Serial: FC8B00DF704A21803231355553445303
Thank you
ayujahndon said:
Hello. Pllease I need Goldcard for leo too
Serial: FC8B00DF704A21803231355553445303
Thank you
Click to expand...
Click to collapse
here is the requested goldcard image. i hope thats not to late
EDIT: Nothing!
Hello good morning, I've tried a lot of times generate my goldcard but always I have the same message , ID Vendor.
My CID with psas is:
F4A6002DF27771304732305553445303
Thank you
Need Goldcard
Hi,
Could someone generate a goldcard for me.
My CID is: 149B0013ADBB00804732305553445303
Thanx very much
Need Gold card
Hi!
Could anyone help me out with a coldcard für my Leo 6.5?
My CID is E0A4005E5D2906804732305553445303
My E-Mail-Adress: [email protected]
Thank You!
With best regards,
John
That was fast!
Thank you!
rbiagi said:
RAMJAN
GoldCard image link to your CID
h t t p://w ww. 4sh are d.c om/file/lOxelTTm/goldcard.html[/URL]
Click to expand...
Click to collapse
any chance you could send me my goldcard image? my Serial or CID is:
9E000000400000000000020002000000
disk id: 07
Thanks!
---------- Post added at 05:30 PM ---------- Previous post was at 05:04 PM ----------
SD Serial/ CID is : 9E000000400000000000020002000000
disk id: 07
Can someone send me my goldcard image. I only have the trial version so I'm stuck until I can get the image. My phone is currently locked up so I need to unbrand it to see if that helps. PLEASE HELP!!!!
rileycn said:
any chance you could send me my goldcard image? my Serial or CID is:
9E000000400000000000020002000000
disk id: 07
Thanks!
---------- Post added at 05:30 PM ---------- Previous post was at 05:04 PM ----------
SD Serial/ CID is : 9E000000400000000000020002000000
disk id: 07
Can someone send me my goldcard image. I only have the trial version so I'm stuck until I can get the image. My phone is currently locked up so I need to unbrand it to see if that helps. PLEASE HELP!!!!
Click to expand...
Click to collapse
1. go to pcwe's goldcard thread: http://forum.xda-developers.com/showthread.php?t=825397
2. download the img file for your CID, which can be found in post #1
Next time you could use xda search by using your CID.
Related
hello and thank for this wonderfull website
i have a problem with my Softbank x01ht......
i can found the program for downgrade the bootloader, i see many posts for this subject but the links for download the update is dead
i see the method with M3100v3cUnlock but i need the
HERMING_IPL1.01_SPL1.04_ONLY.nbh or other program if possible
now if you have a best or simply method please give me because i have this ppc only 2 days and i want change the language in english
thank you very much
oupss sorry for my english
i have other question, its possible to flash my ppc with a French Rom and keep the QWERTY keyboard........
thank a lots.........
read these
http://forum.xda-developers.com/showpost.php?p=1048742&postcount=139
http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
and
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners
everything has already been documented.
kangoo06 said:
oupss sorry for my english
i have other question, its possible to flash my ppc with a French Rom and keep the QWERTY keyboard........
Click to expand...
Click to collapse
possible. already discussed. you need a registry editor to do this.
http://forum.xda-developers.com/showthread.php?t=281476&highlight=0411
sorry but i try again with the HTC_HERMES_SIM_UNLOCK_v1 with the
tutorial of pof but i have all the time error and no upgrade
now i want try other solution see in the post but i need this program
HERMING_IPL1.01_SPL1.04_ONLY.nbh
ftp://[email protected]:xda-developers.com...r-reversed.zip
sorry again
ftp://xda:[email protected]
kangoo06 said:
now i want try other solution see in the post but i need this program
HERMING_IPL1.01_SPL1.04_ONLY.nbh
Click to expand...
Click to collapse
I removed this file because it was exctracted from imei-check unlocker and violates copyright. Please be patient, an alternative solution will come soon.
thanks a lot......
i past one night yesterday and maybe 2 nights now for found a solution
kangoo06 said:
sorry but i try again with the HTC_HERMES_SIM_UNLOCK_v1 with the
tutorial of pof but i have all the time error and no upgrade
now i want try other solution see in the post but i need this program
HERMING_IPL1.01_SPL1.04_ONLY.nbh
ftp://[email protected]:xda-developers.com...r-reversed.zip
Click to expand...
Click to collapse
if u have a x01ht and get an error, i can only say you are doing something wrong.
you have not mentioned anything about what u did, precisely. i cannot give you any comments.
i want say more but my english is limited and for the technical words iam not good but im sure me make mistake with the flash........
my windows xp is french and my activesync 4.2 french too
when i use the M3100v3cUnlock no problem for connect
to my ppc
now when i use HTC_HERMES_SIM_UNLOCK_V1 first time the program recognize my phone and the number of the rom ,after when i accept the update, the phone deconnect and display screen with 4 colours and when the ppc try again to connect with computer for update,activesync quit the desktop of windows and the ppc cant connect, after 2 or 5 min i have a error screen of program update
Read the install instructions, you have to start unlocking from bootloader mode:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock
You don't need activesync at all, you can disable it for doing the patched-radio flash.
i try again and i have this message error
ERROR 120:COUNTRY ID ERROR
thank pof i try now your method
kangoo06 said:
i try again and i have this message error
ERROR 120:COUNTRY ID ERROR
Click to expand...
Click to collapse
Your device needs to have bootloader 1.04.
If you have bootloader 1.06 it will not work.
i know i have the bootloader 1.06
this is a reason why i want change in 1.04
if you can give a link or a method for download the program
you help my life maybe
kangoo06 said:
if you can give a link or a method for download the program
you help my life maybe
Click to expand...
Click to collapse
If there's no rom matching your CID with 1.04 you'll have to wait.
I am close to a solution, but please give me some time...
if y try to flash with the WWE Rom Cingular 1.34.502.1 bootloader 1.06 you think its possible ?
and HERM100 and HERM200 its a same or different
kangoo06 said:
if y try to flash with the WWE Rom Cingular 1.34.502.1 bootloader 1.06 you think its possible ?
Click to expand...
Click to collapse
No, it doesn't match your cid. you have to cid unlock it first and you need bootloader 1.04 for that.
kangoo06 said:
and HERM100 and HERM200 its a same or different
Click to expand...
Click to collapse
read the wiki.
iam unlucky
now the last chance,if i pay at http://www.imei-check.co.uk
i can unlock and after change the rom or i give money for nothing
because my phone is definitively blocked ?
kangoo06 said:
iam unlucky
now the last chance,if i pay at http://www.imei-check.co.uk
i can unlock and after change the rom or i give money for nothing
because my phone is definitively blocked ?
Click to expand...
Click to collapse
i thought u could "use" M3100v3Unlock.exe for downgrading bootloader w/o paying... altho u need to pay to unlock sim-lock. am i correct?
Hi
I cant downgrade my tytn to wm5
Somebody help me?
Thank you.
Please click on the mrvanx guide at the bottom of my signature the answers are there.
hi,
but where I make download the RUUWrapper.exe (CustomRUU by olipro)?
where is the download file??
?????????????????
PLEASE relax and read through THE GUIDE. All download links are there for you to use.
pauloinho said:
Hi
I cant downgrade my tytn to wm5
Somebody help me?
Thank you.
Click to expand...
Click to collapse
Have you simply tried downloading your carriers official ROM?
I tried the WM6 Black Dymond 3.5 ROM, and think because of some quirks I want to just load the Carrier ROM back uon. Do I need to follow this guide? or can I just re-flash back to the AT&T ROM?
Brese said:
I tried the WM6 Black Dymond 3.5 ROM, and think because of some quirks I want to just load the Carrier ROM back uon. Do I need to follow this guide? or can I just re-flash back to the AT&T ROM?
Click to expand...
Click to collapse
No, no need to follow the guide for what you want to do. Just get the AT&T ROM and flash it normally. Voila!
Sweet! That is some ingenuity!
when im tried to download it appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
Sorry for my english
pauloinho said:
when im tried to download it appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
Sorry for my english
Click to expand...
Click to collapse
What link are you trying? Send it over.
@TaurusBullba
If the OP updated to HardSPL the RUU exe wont recognise the SPL version and he will get a 260 error, also the possibility of a 'NO GSM' Brick is there if the radio BL has been updated to 108...the guide rebuilds the nbh into an OS only nbh and uses customruu 4.3 so the new SPL is detected and the current radio version is retained.....
... if the op hasnt updated to HardSPL they REALLY should before continuing :s
Ahh... good call. I hadn't thought about if he had used HardSPL.
You are the Guide Master, SirVanx!
Point taken and I now shall go hide under my rock...
mrvanx said:
@TaurusBullba
If the OP updated to HardSPL the RUU exe wont recognise the SPL version and he will get a 260 error, also the possibility of a 'NO GSM' Brick is there if the radio BL has been updated to 108...the guide rebuilds the nbh into an OS only nbh and uses customruu 4.3 so the new SPL is detected and the current radio version is retained.....
... if the op hasnt updated to HardSPL they REALLY should before continuing :s
Click to expand...
Click to collapse
LOL sorry, i was a tad crabby last night (no sleep).
@pauloinho
Have you managed to do it?
?
Please, don't beat me for my stupid and annoying question - trying to find this information, and not only me, but unfortunately without success
Is there some way, how to downgrade HardSPLs to normal SPL, f.e. 1.04, because of warranty?
If this was solved, please, give me direction
mrvanx said:
LOL sorry, i was a tad crabby last night (no sleep).
@pauloinho
Have you managed to do it?
Click to expand...
Click to collapse
Mrvanx send me the soft. RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool to my email.([email protected])
Thank you
pauloinho said:
Mrvanx send me the soft. RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool to my email.([email protected])
Thank you
Click to expand...
Click to collapse
Dude the software is linked to in the guide, if you READ IT you will find all you need.
mrvanx said:
Dude the software is linked to in the guide, if you READ IT you will find all you need.
Click to expand...
Click to collapse
How????
The RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool link is not working
It appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
try again now
mrvanx said:
try again now
Click to expand...
Click to collapse
Tanks mrvanx,the Custom RUU V4.3 its workin.
But the dutty's good NBHTool v1.1 still not working, appears this message"You do not have the required permissions to view the files attached to this post. "
Hi mates. i tried to flash my G4 wizard with tnt rom. the process got error at 99% and now its only displaying 3 colour screen. and when i connect usb, there is written usb on the bottom. and nothing else. i tried a lot to unlock. but all process are saying that the device is not connected.. so please help me with this.
Regards
-Reload to tri color(holding voice record then softreset and wait to 3 color)
-up date the ship rom
(i'm sorry my english)
bro thanks i am trying to download the shipped rom. but links not working.. can u post me the link for my T-mobile?
Regards
ruk_design said:
bro thanks i am trying to download the shipped rom. but links not working.. can u post me the link for my T-mobile?
Regards
Click to expand...
Click to collapse
T-mobile has his own Site with the firmware.
Besides, what language do you need?
http://www.t-mobile.nl/
http://www.t-mobile.de/
http://www.t-mobile.com/
Etc..
bro i need english
i am downloading the original shipped rom. what if still my device got the same error? then what should i have to do? is there any unlocking tool for g4 that works for this situation?
my IPL = 2.26
SPL = 2.26
both r same.. so any suggestion?
ruk_design said:
i am downloading the original shipped rom. what if still my device got the same error? then what should i have to do? is there any unlocking tool for g4 that works for this situation?
Click to expand...
Click to collapse
If that is the original Rom, it shouldn't give that error, no worries.
Your device is G3 btw. easy to unlock.
thanks a lot bro. any nice software for my G3 unlocking will be highly appreciated..
Thanks a lot.
see on top of this screen, XDA-Wiki, go to Wizard section on troubleshooting
bro i started the shipped rom and at the end it said that " the NBF" file is not for ur PDa please update to newer version"
You can use one of 2 tools here
Take the nk.nbf in the ship rom(open in winrar) then put to tool and update
Or use this Mun tool
http://forum.xda-developers.com/showpost.php?p=1545370&postcount=61
Anyone has found a way to unlock the HTC Touch Dual?
the Elf unlocking doesn't work on duals...
if you dont mind paying for it, www.imei-check.co.uk works and it does it by the phonies imei number,
i can confirm this works as its how i unlocked my orange one
Am I correct in assuming that can only sim-unlock the phone (i.e not CID unlock it)?
yes i believe that to be correct, it will prob change in the future
If you can read the unlock codes, here is the imei-check rom dump. i tried it with hex editor but couldn't find anything
pls change the file extension to ued
this file work only for your phone ... this file is crypted for your imei only!
if we find the same program which www.imei-check.co.uk use, can we see the code on those ued files?
sorry for my english i'm from france
what can we do if we have the .ued file for our touch dual?
NetrunnerAT said:
this file work only for your phone ... this file is crypted for your imei only!
Click to expand...
Click to collapse
do you know how to decrypt this file?
no ... and i think ... why we need?
some guys can edit SPLs and in the near future all ppls here get a CID unlock tool. but ... this device is new and all need time!
NetrunnerAT said:
no ... and i think ... why we need?
some guys can edit SPLs and in the near future all ppls here get a CID unlock tool. but ... this device is new and all need time!
Click to expand...
Click to collapse
i think we need because www.imei-check.co.ukuse this file to unlock our touch dual so if they manage to have the code which unlock the sim of our phone whith that file why can t we decrypte it ourself?
soryy for my english
NetrunnerAT said:
no ... and i think ... why we need?
some guys can edit SPLs and in the near future all ppls here get a CID unlock tool. but ... this device is new and all need time!
Click to expand...
Click to collapse
you saw to xdaking "this file work only for your phone ... this file is crypted for your imei only!"
so you think that he can use that file for what?
Do anyone need that I post my dump file from imei-check?!?!?!?
change txt to ued
get olipro and cmonex a kaiser and by unlocking that those methods will be used to unlock touch dual and polaris.
Pawel062 said:
get olipro and cmonex a kaiser and by unlocking that those methods will be used to unlock touch dual and polaris.
Click to expand...
Click to collapse
Sorry the ignorance, but what's olipro and cmonex?!?!?!?
t0p0gigi0 said:
Sorry the ignorance, but what's olipro and cmonex?!?!?!?
Click to expand...
Click to collapse
two forum users very good at low level hacking stuff (sim unlock/HardSPL)
t0p0gigi0 said:
Sorry the ignorance, but what's olipro and cmonex?!?!?!?
Click to expand...
Click to collapse
fine, you can not know what (who) I am... but not knowing my dear cmonex?!? unforgivable.
Olipro said:
fine, you can not know what (who) I am... but not knowing my dear cmonex?!? unforgivable.
Click to expand...
Click to collapse
typical...
you guys are nuts...lol
Olipro said:
fine, you can not know what (who) I am... but not knowing my dear cmonex?!? unforgivable.
Click to expand...
Click to collapse
i know. someone is going to pay for this
please replay me ! can i upgrade hard spl with sd card?
yes you can
amjad4u said:
please replay me ! can i upgrade hard spl with sd card?
Click to expand...
Click to collapse
http://www.darkforcesteam.com/showthread.php?t=252&page=2
jincr said:
http://www.darkforcesteam.com/showthread.php?t=252&page=2
Click to expand...
Click to collapse
why give him a link to a chinese site if he isnt chinese?
this link explains how to flash a rom via sd card( the hardspl guide has vanished from the wiki )
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
just rename the file as per instructions on this link and you will be able to flash it.
The device must be cid unlocked before you do this
Or checkout page 116, post #1160 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...
or just give him the direct link ultramag69
http://forum.xda-developers.com/showpost.php?p=2048832&postcount=1160
Yes, I would've but a little searching is good for the soul... Or so they say...