Related
I have unlocked with Olipro's hardspl, and flashed the 1.50 radio, how do i go about installing the rom. I've already downloaded it. Do i have to run it from my x7501?
Anybody there??
Someone knows how to install this ROM. Neither my desktop, nor my x7501 recognizes the file type "There is no apllication associated with........" So how do i install this thing??
When i run the RUU, its trying to flash the radio again, i've already got the radio. Ineed the ROM.
Nevermind i got it. Thanks for all the help though.
long story short, put HSPL 2.08 on my TMOUS HD2 so i could use chuckyrom (which did not work.it didnt download as an exe)...i.need.to.take.it.off. ive spent the past day researching how to do it. ive searched this site over, and tried everything, yet when at the bootloader it still says i have cotullaHSPL on it...i need it back to the original so i can send it in for repair. i did not make a copy of whatever file i needed. i have nothing but a phone with HSPL that needs to come off...any help would be greatly appreciated! thanks!
oops duplicate
depends what your original was.
If its a tmous phone, run hspl3 and choose 2.08.0000
if its a regular hd2, run hspl2 and choose 1.42.0000 or 1.66.0000
and of course the rom didnt download as an exe, ,, custom roms never do, they come as an .nbh file, and you put that in a folder with customruu.exe and run customruu.
thanks for the quick response...did what you said...used the HSPL3 download and installed SPL-2.08.0000 and it says the usual MicroP(LED) and such...not sure if that still voids the warranty as the original i had was 1.42 i believe...but it doesnt say HSPL or Coulleta so i should be fine eh? any final way to move it back to 1.42? or will 2.08 work?
DoDaHarry said:
thanks for the quick response...did what you said...used the HSPL3 download and installed SPL-2.08.0000 and it says the usual MicroP(LED) and such...not sure if that still voids the warranty as the original i had was 1.42 i believe...but it doesnt say HSPL or Coulleta so i should be fine eh? any final way to move it back to 1.42? or will 2.08 work?
Click to expand...
Click to collapse
if it was 1.42.0000 then you should use hspl2 and set it to 1.42.0000 else yes, they will know you've been messing. 2.08.0000 only ships with tmous phones, and the only way you could possibly get 2.08.0000 on your phone is by using hspl.
(HSPL3 is really for tmous customers, use hspl2 to return yours to stock)
downloaded HSPL2 and tried to downgrade from 2.08 back to 1.42...it just went to an error message saying bad device ID (or something like that) also just tried putting the RUU_signed.nbh on my sd card, renaming to LEOIMG.nbh and starting in bootloader...it goes to a white screen that says loading... and thats it...is it stuck? any other option?
DoDaHarry said:
downloaded HSPL2 and tried to downgrade from 2.08 back to 1.42...it just went to an error message saying bad device ID (or something like that)
Click to expand...
Click to collapse
you got a telstra phone?
also just tried putting the RUU_signed.nbh on my sd card, renaming to LEOIMG.nbh and starting in bootloader...it goes to a white screen that says loading... and thats it...is it stuck? any other option?
Click to expand...
Click to collapse
what rom you trying to use? also, i think spl 2.x wont allow itself to be downgraded to 1.x this way (though im not 100% sure on that)
nope...its just a standard Tmobile USA HD2...i made the mistake of trying to hack it and put HSPL 2.08 on and need to return it but that voids warranty...so i need to take it off...right now its showing it has just spl 2.08 and the regular boot screen...no hard spl, just standard...will that be ok?
DoDaHarry said:
nope...its just a standard Tmobile USA HD2...i made the mistake of trying to hack it and put HSPL 2.08 on and need to return it but that voids warranty...so i need to take it off...right now its showing it has just spl 2.08 and the regular boot screen...no hard spl, just standard...will that be ok?
Click to expand...
Click to collapse
ahhhh ok, well then no, it never did have 1.42, 1.x only ever ships on regular leos.
not sure if that still voids the warranty as the original i had was 1.42 i believe
Click to expand...
Click to collapse
yes, 2,08.0000 will be fine.
awesome! thank you! the whole thing started when the first HD2 failed...so Tmo sent me another one...i managed to fix #1, and also killed and installed HSPL on the second one...so i would either have to remove it, or send my good one back and keep the broken one...my first one (thats working is showing it has spl 2.10 (my bad, i thought it was 1.42) so i only need to downgrade from 2.08, to 2.10...but if spl 2.08 wont void it and itll be fine, then im happy...thanks again!
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
anubis1126 said:
Hi i had my hd2 repaired by htc now the spl is spl3.03.0000
so the question is which hspl do i put on as i really am not sure thanks
Click to expand...
Click to collapse
There is no HSPL version present yet who is compatible with SPL 3.03
We need to wait sir
Ow Ps, do you have a Branded UK Orange device?
no its unbranded
Any updates on hspl for this yet
if its unbranded just flash a stock 1.66 to downgrade the spl then hspl as before.
Hi. I am on 3.14, i would need to downgrade too...
would this file i found online be good? :
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 ΒΆ
7U_2.06.51.07_Ship
Its 1.66.404.1 but not 1.66.0000.. is this a problem?
I need to find a stock rom on NLD (dutch) to downgrade before putting my HSPL... Why is it so hard to find an original file from factory, say 1.42 in everylanguage?
And what is the difference by downgrading to 1.42 or 1.66?
Thank you kind sirs
1.66.404.1 is rom version,,, 1.66.0000 is the spl version.
yes that rom should be fine assuming you have an unbranded hd2. doesn't matter which you downgrade to, they both will allow hspl.
its not at all difficult to find them.
look for "leo official roms" thread, in rom development section, and in there, first post first link takes you to most of the roms.
Samsamuel, thx a lot for that positive answer HD2 is indeed unbranded.
makes me feel better, been in despair with my dutch HD2...
So its finally clearer to me, 0000 is SPL and XXX is rom version
But to Downgrade, a non SPL version is ok then?
But to install HSPL, i need an SPL version?
And one last thing, can i install all of this stuff without booting from SDmini?
Those were the old procedures, no?
Thx!
all stock roms come with a version of spl, but it doesn't say which spl in the filename.
1.43 and 1.48 roms come with spl 1.42.0000
1.66 and 1.72 roms have spl 1.66.0000
3.14 comes with spl 3.03.0000 and hspl doesn't work with it.
the numbers you see in the filename are rom (1.66.404.1) and radio (2.06.51.07) versions, not spl.
when you look in bootloader at spl, it will always end either .0000 or .hspl where 0000 is stock.
it doesn't matter which spl you have, so long as it isn't spl 3.03 then hspl will work and allow you to flash roms andradios.
Thx! Even clearer now
Unfortunately, i am currently on 3.14.. i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
How can i downgrade to those versions who enable me to use HSPL? Once u have a higher rom, it detects lower and u cant downgrade?
Is the only method to flash with SDcard?
zewill said:
i tried installing a lower version ROM (1.66, the link i put earlier) but it didnt work..
Click to expand...
Click to collapse
Then that isn't your stock rom. (Although you didnt say why it didnt work, , ) if its teh right rom it will work
I think i managed to install my English pack allright!
I installed the earliest official pack from HTC, rom 1.48
Then installed HSPL3, then my official HTC WWE 3.14 rom!
Confirmed, it works!!!
Again, Thank you for your time and your explanations of roms!
See you around on the forums, mate!
dont smile too soon, if you flashed a 3.14 rom whilst spl is installed then you will have memory and stability issues.
Go to
settings menu all settings system memory, what does it show for free program memory? around 50meg? should be about 140.
Couldnt really find "memory settings" but what if ound was this:
Total storage: 176 mb
Used storage 56
Free storage 119 mb
TOtal programm 208 MB
Used program 163 mb
free programm 45 mb
NO SD CARD (must buy one tomorrow lol)
So, as u said, its around 40 mb.. What should have i done better?
Also, what is the difference in the SPL?
I mean, from factory settings, i upgraded to 3.14.
With HSPL, i upgraded to 3.14
What difference does it make, isnt it the same? Doesnt 3.03 spl install itself?
Anyways, will be glad to hear your comments on my new problem then haha
not through usb flash. If hspl is installed it remains installed.
3.14 roms must have spl 3.03.0000
Before the 3.14 roms it didnt matter, all roms worked on any version spl, but the 3.14 roms dont.
You should have removed hspl first, (so that your spl ends .0000) then flashed the 3.14 rom, , this allows it to upgrade spl to 3.03.0000
Hhm, i really dont wanna brick my HD2 with all those stability issues.. is there a risk if i leave it like that?
Anyways, i'll restart the instalations then. I checked on bootloader, currently this is what i have: SPL-2.08 HSPL 8G XE
How should i proceed? Should i flash from SD card a 3.14 directly WWE? I have nothing yet on my HD2, (using 3.14 WWE official rom from HTC website) so i dont really care about flashing, reinstalling, hard resets
Just give me advice on how to proceed to have the perfect installation
Is a flash from SD card obligatory? But that would get rid of HSPL, no? and if i get rid of HSPL, my HD2 is going to go back to its original language (DUTCH), right? I want to avoid putting my HD2 in that language...
Say, if i SDFLASH the latest rom WWE (even though my HD2 previously to HSPL only accepted NLD (hence dutch) roms), will it work?
Sorry for taking up so much of ur time, but ur comments are so helpful
connect to usb, put the phone in bootloader.
then
run hspl2
choose 1.66.0000
when phone reboots, quickly hold voldown to reenter bootloader
run the 3.14.exe
Thx for the quick reply.
Why would i use HSPL 2 now, i was using the HSPL 3 before? Isnt it the latest most stable one tu use?
Can i still run HSPL3 and choose 1.66? (i think not actually i only had choice of 2.08)..
So can i run HSPL3 and then re run with HSPL2??? It wont have compatibility issues?
And how to install the exe while in bootloader? Is it a flash from SD Card?
What will happen if i leave my 3.14 in the 2.08 SPL? only stability issues? No risk of bricking, or long term affecting negatively the phone?
So many questions.. hope u can answer all of them..
Also, one last big question: Now that HSPL is installed, isnt it easier to simply, when i recieve my SD card, to flash a WWE official rom 3.14? wouldnt that do the trick? Or i need to go through HSPL2 for sure?
Thx again!
the .exe's are just installers, the spl/hspl inside is the same. So, the 2.08.hspl in hspl3, the actual code that gets flashed to your bootloader, is IDENTICAL to 2.08.hspl in hspl2.
But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason.
Oh, and whilst we're at it, hspl2 detects which spl you currently have and offers you the opposite (so if it finds 1.42.0000 it sets the dropdown to 1.42.hspl)
HSPL3 doesnt do this, it always offers you 2.08.0000 until you manually change it, and many a newb has just clicked OK and thinks they have installed hspl, when in fact they haven't.
Lol, i be one of the many noobs.. But in my bootloader, it says i have installed HSPL, so.. i guess its installed!
Will follow your recommendations, but just one last thing
How to remove this current HSPL3 then and restart the steps with HSPL2? You said that
"But, hspl3 only has 2.08.0000 and 2.08.hspl as options, but since spl 2.08 isn't stock for your phone, if you ever needed to get back to stock, you can do that with hspl2, but not hspl3, so since the one version of spl/hspl that they both contain (2.08) is teh same, and hspl2 has extra options for a non tmous user, why use hspl3? there is no reason"
I used HSPL3 because i read on forums thats its better to use the latest HSPL as the previous versions usually are out of date.. seems i was mistaken then... Also, i used HSPL3 because it was compatible with any 1.XX rom, and i could only downgrade as low as 1.48. Would HSPL2 be able to be installed on 1.48 official rom? I thought highest HSPL2 could work on was 1.42?
So you say that now that i have installed HSPL3, i cannot go back to stock? Im sure there would be a way, but what should i do then?
Should i just flash some stock rom from SD card, hoping it takes HSPL3 away, and restart procedure with HSPL2?
Or with USB sync i can restart the procedure, by just openiong HSPL2 without touching any rom?
Hi, since this afternoon I have been trying to roll back my spl version to put the new rom in.
I download my o2 rom and couldn't install it so I used hspl2 to bring it back to 1.4.
I was able to put the o2 rom on then.
Since then I have tried various SPL's to get 3.14 installed to no avail.
I have just put spl back to 2.08.hspl and 3.14 installed right away.
From following the spaghetti junction of other threads, it says it shoul'dt run n this config and you have to roll back the HSPL version (in fact no hspl).
Have I got problems for myself (and yes have the 50mb limitation (is this real or just display)).
P.S. anyone know where hspl3 is, tried searching but almost every thread has a mention of hspl in it so nearly all threads returned lol
sir HSPL 3.03 Don't exist.
For using Stock ROM 3.14 correctly without limitation of 50MB of program memory, you need to remove HSPL. (use the HSPL2_RUN.exe)
But like you mention to have a branded device you need to use the goldcard technique for install the standard stock ROM 3.14
Take a look on this thread for more explanations:
http://forum.xda-developers.com/showthread.php?p=8947611
My HD2 needs to go in for repair so I need to remove HSPL and flash a stock WinMo ROM ready for monday when it is getting collected.
I have followed the instructions here - http://forum.xda-developers.com/showthread.php?t=623402 but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Would someone be kind enough to enlighten me here as I have to sort this before Monday.
Cheers in advance
Bry.
Bryski said:
but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Click to expand...
Click to collapse
the quick flash is the bootloader looking for a valid file, and usually means one of a few things..
1 - the file isn't correctly named leoimg.nbh
2 - you simply renamed the htc_wwe_blahblah_.exe to leoimg.nbh instead of extracting ruu_signed.nbh and renaming THAT.
3 - you are using an sd card bigger than 4gb (not always the case, but most times bigger cards fail)
4 - the card is formatted FAT16 instead of FAT32
5 - hspl isn't installed after all and the ROM is not a match for the phones ROM/region lock. (what does the spl line say in bootloader?)
try those, see if it resolves it.
fix
go to http://forum.xda-developers.com/showthread.php?t=611433 and on the 4th post there is a zip at the bottom download unzip and run and just choose the non hspl
what hspl are you running?
Ok tried again and the bootloader screen looks like this
thats the right on but the last line about the touch is different i have 50 instead of 40
Any reason why it would be different?
Wanna make sure its dont right, dont want em sending it back and telling me I have hacked it
That's only a valid spl if you have a tmous,,,, if you have a regular hd2 then any spl starting 2 is wrong. Only tmous roms use 2.x spls.
Its a UK O2 phone mate, what have I done wrong then?
Bryski said:
Its a UK O2 phone mate, what have I done wrong then?
Click to expand...
Click to collapse
Well without scanning back through the thread, I'm guessing you had 2.08.hspl installed and ran hspl2 or 4, which will have defaulted to the opposite, namely 2.08.0000,
Or,you SD flashed a tmous stock rom, which didn't initially fail because hspl was installed, but then failed to continue to flash after the spl had changed because hspl was no longer there.
Fix - run hspl2 (hspl2 is the most usefull for us reg Leo users) and choose a matching spl to the rom version installed ...
Rom ....... spl
1.43 ....... 1.42.0000
1.66 ....... 1.66.0000
3.14 ....... 3.03.0000 -- you would need to use Hspl4 for this.
If the phone is buggered and wont boot, then it doesn't really matter which you choose, so long as it's one of those three.
(And in fact it probably wouldn't matter even if the rom and spl don't match,, they're only really interested in the spl, just nice to be cautious,would be a pain to have it sent back on a technicality)
Phone boots but I cant do anything with it due to the screen freeze which is why its going back to HTC.
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Bryski said:
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Click to expand...
Click to collapse
You're using the wrong hspl.exe, its v1 that requires 1.42 to work,,,try again.
Ok I think I got it
I should flash the latest ROM again aswell really as they asked me to do that when I rang em yesterday
All sorted and upgraded to the latest ROM ready to go back to HTC.
Cheers mate saved me a lot of heartache
Welcome...
while on this topic, im using Leo_RADIO_2.15.50.14** via HSPL
now i wish to return to my stock (which i am pretty sure is this :
RUU_Leo_HTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
(i copied down these details when i got my phone on the first day)
do i need to roll down to Radio 2.05.51.05_2 ?
i cant seem to get this ROM installed, whether its 1.42 SPL or 2.08 HSPL
i removed HSPL, and definitely not a TMOUS hd2 but cant install the stock rom