I scored first HSPL3 and its ok..
and
I scored task29 installatio is ok
i switch the htc,,,
the display only write htc,,and will not start the windows..
please help
please help me...
you havent got a rom on the phone. task29 formats the phone, , wipes the memory, , all gone.
Boot into bootloader, flash a rom, it will start.
and make sure you use a compatible radio
Related
Ok here is the thing. I was using TNT5.0 rom on my wizard g4 cid locked. I saw in this forum the XM6r4 rom so i want to give it a try. I was flashing wizard love rom when something happen (electric problem, i guess) the process didnt finish, I reset and turn on my phone, know my phone is stuck on the splash screen, I can enter the bootloader mode but i cant flash the wizard love rom, when I try it i get a 260 error. what can i do??? help me please
Try to flash with your stock ROM (i.e. The original ROM that exactly matches your Wizard and carrier). Then you can install SoftSPL/HardSPL and perform flashing again.
u can also remove hardSPL by instaling nk.nbf file with wanted IPL/SPL using RUU...I've done it. Can u tell what stands for error 260? is it a connection problem or it says u need to change RUU, cause i dont remember all of these errors numbers....
Hi tried to flash to the new o2 rom. My hd2 started to reboot randomly after working for a few hours, now all i have ts a boot loader screen. When I try to flash hspl or spl I get this screen.
Please please please, can anyone help me???
Post picture of bootloader screen you have.
electrobawz said:
Hi tried to flash to the new o2 rom. My hd2 started to reboot randomly after working for a few hours, now all i have ts a boot loader screen. When I try to flash hspl or spl I get this screen.
Please please please, can anyone help me???
Click to expand...
Click to collapse
what i think is that you might have an incomplete flash .. i guess you may need to do the task29
its just like flashing process .. and it super fast.. it cleans the remains of the last rom..
and may be then you can try and flash a new rom
for task29 check this link http://forum.xda-developers.com/showthread.php?t=644781
and dont worry friend.. its really very difficult to brick the hd2.. i think this is not a very big issue
hello i had that as well. all i did was re flash my hd2 and took out the memory stick and stop rebooting i hope this help
happybob said:
hello i had that as well. all i did was re flash my hd2 and took out the memory stick and stop rebooting i hope this help
Click to expand...
Click to collapse
If you get to the boot screen, you have not bricked your phone, well as I know off, they might be a few rare cases but I doubt it..
my friend there is no hspl for 3.14 so after you install the new rom your spl is 3.03 so no more custom roms !!! only official i make the same mistake
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.
My HTC HD2 hang on HTC...
HARD SPL 2.08 HSPL
RADIO 2.15.5 (not show in boot loader mode)
i try many time for rom upgrade...(user latest energy roms also)
but not success...
i do hard SPL ok
flash radio ok
but
problem in rom upgrading....
1.Some time rom upgrade stop in 0%
2.Some time stop in 16%
3.Some time stop in 62%
4.Some time stop in 100% but NOT..show rom upgrade complet..(with SD)
what is problem here..
plz help me ....
Try this HSPL4 ................................
.................................................
kalros said:
.................................................
Click to expand...
Click to collapse
br i allready use this...
its ok my phone hardspl installed.
but ..
after this my problem start...
Have you also tried doing a Task29 first?
Which software have you tried to flash ROMs? Also LeoAdvancedRUU.exe or do you use SD card method only?
Have you tried another USB cable?
Have you tried another SD card (<=2GB)?
Have you tried to download the ROM file again?
Many questions, I know, but maybe also a solution.
chill it in teh fridge for half an hour then try flash your stock rom from sd card, if that works, you may have overheating problems.
if nothing works, remove HSPL and flash a stock ROM via USB or SD card, whichever suitable.