All credits goes to myn. Here is the original thread [ROM] Myn’s Warm Eclair - [RLS1 - 06/17/2010] - An Accelerated Experience
Confirm working good on my NIKE100 on ext2 SD, so withour flashing, i can use Winmo n Android on the same device.
How to:
1. Download from the original thread, i'm using NoMORootFS for SD with 240x320 version
2. Backup! than, clear whatever "android" stuff you have from sdcard (I dont want it to get caught up in the install) especially your andboot folder
3. Extract contents of downloaded zip to temporary directory
4. Copy extracted /andboot folder to the ROOT of your SDCard
5. copy zimage to /andboot folder with this version (credit to mblaster) get in from http://84.23.71.227/kerneloftheday (i'm using zimage with vibration on my nike100 with zimageNike name)
6. overwrite default.txt with attached default.txt
7. Run HaRET, than hit “run” to launch android
8. Press and hold center of dpad after hitting "run" and follow the directions in the NoMoRootFs menu system
9. Install android system
10. Quit installer
11. Booting into Android
12. After you can see android logo wait about 15 minute
13. then shutdown and open up your phone again (should boot into winmo)
14. start haret and boot again to android
15. your android is ready to use
Working: Call, sms, ring, data (although there seems to be a little problem)
Not Working: Bluetooth, camera
Great job and a good tutorial buddy, I defenitly gonna give it a try.
ok, try it and share here, maybe it can make us nike user more familiar with android
Nice... But!
Nice one there. There is seems problem with the hardware keypad. The hardawre keypad works though keypad #1 when pressed twice sleeps nike. Maybe the said button is mapped for that function. Better if we can bring it back to the original function. Thanks again.
uhm...
Hey,
I copied everything onto my SDcard, into the /andboot directory
Haret.exe starts, holding the D-pad...Linux starts etc, but...then it hangs with an error "sh: 2 unkown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD card"
And from there on every button I press gives my weird syntax...
anybody knows what I'm doing wrong..?
Installed on ext2 partitions, now take some tests on my nike 100.
Problems I found:
- On boot I have Voice Search not responding.
- If I try to set mms settings the apn disappear (i use Wind in Italy), setting only apn and name work (i'm syncronizing with gmail)
Thanks a lot for this tutorial!
Many thanks for this post.
Three questions:
You are using kernel with vibration for niki200/300 on your nike100 and your screen dont freeze?
What's the problem with data connections?
It's android 1.6?
Regards!
ebautista said:
Nice one there. There is seems problem with the hardware keypad. The hardawre keypad works though keypad #1 when pressed twice sleeps nike. Maybe the said button is mapped for that function. Better if we can bring it back to the original function. Thanks again.
Click to expand...
Click to collapse
what do you mean by keypad #1? hardware numeric and alphabetically works on me.
and the android device keypad is different with winmo, in android there are back, menu, end key (CMIIW). so we need to map our device keypad to android one
hansie_k said:
Hey,
I copied everything onto my SDcard, into the /andboot directory
Haret.exe starts, holding the D-pad...Linux starts etc, but...then it hangs with an error "sh: 2 unkown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD card"
And from there on every button I press gives my weird syntax...
anybody knows what I'm doing wrong..?
Click to expand...
Click to collapse
when it tolds to hold d-pad, try to hold it or press it twice,it will come to installer screen, then install it first, after that you can boot android
vocione said:
Installed on ext2 partitions, now take some tests on my nike 100.
Problems I found:
- On boot I have Voice Search not responding.
- If I try to set mms settings the apn disappear (i use Wind in Italy), setting only apn and name work (i'm syncronizing with gmail)
Thanks a lot for this tutorial!
Click to expand...
Click to collapse
voice search: i don't use that, maybe that is the build error
never set mms, but if we set apn other MNC and MCC then it will disappear on apn list but it do work, myn is trying to fix this problem
Maxxd01 said:
Many thanks for this post.
Three questions:
You are using kernel with vibration for niki200/300 on your nike100 and your screen dont freeze?
What's the problem with data connections?
It's android 1.6?
Regards!
Click to expand...
Click to collapse
yes, my screen is not freeze
data connection?my apn setting no showing on apn list but it do connect, but sometimes i find it is more difficult to make connection, don't know if it is eclair probelm or network problem
no, it is eclair, android 2.1
waiting for froyo to come here
youngsien said:
voice search: i don't use that, maybe that is the build error
never set mms, but if we set apn other MNC and MCC then it will disappear on apn list but it do work, myn is trying to fix this problem
Click to expand...
Click to collapse
youngsien said:
yes, my screen is not freeze
data connection?my apn setting no showing on apn list but it do connect, but sometimes i find it is more difficult to make connection, don't know if it is eclair probelm or network problem
no, it is eclair, android 2.1
waiting for froyo to come here
Click to expand...
Click to collapse
The APN editing issue is caused from the paid market enabler script that is running as a service. It is trumping changes made to the APN list.
I am going to talk to dzo about making the same changes he made in the Donut ril for me. This should hopefully eliminate this issue.
The Voice Search Wait/Force close on start is a known issue and unfortunately in this build is more of an annoyance. For now just click the "Wait" button.
Okay, tested it today almost the whole day, started with full battery at 08.00, very surprised about the graphics and the response of my Niki, lot's of stuff are working, internet connection worked, hardware keypad was working normally, Gmail working, incoming and outgoing call's working, sms working.
Only tested those things because it's a phone and those things are the most important for a phone (my opinion).
Try to acces my sim-card to add contacts but wasn't able to do that.
Okay at 19.45 my battery is empty, be aware my battery is 3 years old.
Conclusion, for me it is a perfect working phone, sometimes you need a little bit patience to let the phone do his job.
Thanks youngsien
Any chance of getting CDMA functionality for this?
youngsien said:
when it tolds to hold d-pad, try to hold it or press it twice,it will come to installer screen, then install it first, after that you can boot android
Click to expand...
Click to collapse
I've tried after I read this reply , ( try to hold d-pad or oress it twice)...
It's still not work.
maybe we need the file = "system.img") that not provided on sdcard.
myn said:
The APN editing issue is caused from the paid market enabler script that is running as a service. It is trumping changes made to the APN list.
I am going to talk to dzo about making the same changes he made in the Donut ril for me. This should hopefully eliminate this issue.
The Voice Search Wait/Force close on start is a known issue and unfortunately in this build is more of an annoyance. For now just click the "Wait" button.
Click to expand...
Click to collapse
hey, the creator Myn is here, is it ok if i post your build in here? i hope nike user can has some fun to get android run on their device.
Can you please talk to dzo to make bluetooth enable for nike too? i think this is the minus one for nike user, kaiser and polaris even can use wifi and bluetooth but for us nike user, we don't have wifi but we can't use bluetooth also
will wait for your next release. thanks.
Rataplan said:
Okay, tested it today almost the whole day, started with full battery at 08.00, very surprised about the graphics and the response of my Niki, lot's of stuff are working, internet connection worked, hardware keypad was working normally, Gmail working, incoming and outgoing call's working, sms working.
Only tested those things because it's a phone and those things are the most important for a phone (my opinion).
Try to acces my sim-card to add contacts but wasn't able to do that.
Okay at 19.45 my battery is empty, be aware my battery is 3 years old.
Conclusion, for me it is a perfect working phone, sometimes you need a little bit patience to let the phone do his job.
Thanks youngsien
Click to expand...
Click to collapse
yup, seems like battery problem still there,can't compare to winmo. Lose in battery, bluetooth, and camera. hey you can manage it for a long time, do you have data always on?how was you using it?
88fingerslukee said:
Any chance of getting CDMA functionality for this?
Click to expand...
Click to collapse
don't know about that. soryy....
Dricos said:
I've tried after I read this reply , ( try to hold d-pad or oress it twice)...
It's still not work.
maybe we need the file = "system.img") that not provided on sdcard.
Click to expand...
Click to collapse
no, system.img is created in /andboot when installing, no need to copy file "system.img". here is the step i usually use. when starting haret and hit run, lot of text (linux boot style) come out. ok from now press and hold center d-pad, after some page it will halt with the message "press center d-pad to....." then release your 1st d-pad hold then press and hold once again. you should see some weird code on your screen but that's ok. after that you will come to installer screen to make system.img and data.img on your sd.
hope you understand, sorry for my english
thanks
youngsien said:
don't know about that. soryy....
Click to expand...
Click to collapse
Darn.
I think it actually already has CDMA functionality since this came from the Vogue thread, but I'm not unsure as to how to get the default.txt file right so that it will boot. Does anybody know of a guide to the the android linux boot commands? It's possible that the devices differ enough to require some different commands.
88fingerslukee said:
Darn.
I think it actually already has CDMA functionality since this came from the Vogue thread, but I'm not unsure as to how to get the default.txt file right so that it will boot. Does anybody know of a guide to the the android linux boot commands? It's possible that the devices differ enough to require some different commands.
Click to expand...
Click to collapse
theoritically is right, but i don't know about that, do you ever asked mblaster on his nike myn donut thread?he is more master in this, because he can compile zimage kernel for nike. maybe he know the answer.
Hi all, I've tested yesterday and this morning...
I found it unstable, after I have set the apn I tried to sync with gmail accont, but never work (always "problem with the sync" reported).
Sending and receiving sms work, make calls work difficult, sometimes i heard but on the other side doesn't hear me.
I try to reinstall and don't set the APN, but anything solved.
Last, after reinstall, when I call it goes to sleep mode but no more wake up (using camera button twice, or other buttons).
I'll do more test, hope this can help.
Bye
p.s. sorry, I speak english only a little bit
Hi all,
Nice build...
Anyway, although it's very hard to resist, imho it's a good idea to wait a few more days until Myn releases the next Versions. If you follow the original Thread in the Vogue forum, you'll see that there are still a lot of problems even for the Vogue Users. For that reason it's probably a good idea to wait until the big one's have been fixed...
hi!
so what can I do now? no hard reset plz!!!!
looking forward!
Have u tried to increase the volum on u phone? ;-)
Sent from my HTC HD2 using XDA App (mdj froyo desire hd)
i can use players and listen to music, but when i get a call, it doesnt ring and doesnt vibrate. if i got to sound options and cklick OK after choosing a sound, it doenst work, i get the first standart tone back and i cant get out of my sound options, only minimise it
I MEAN CHOOSING A SOUND ON MY WM!!!!!!
Qale o'zbek )...
Why dont u just back up and reset?.
i had this problem i did hard reset
but i had another problem the sense wont load
so i install CHT 2.0 its fixed it
its might be relevant
Have you tried restarting Windows... This happened to me (randomly) and I just rebooted. All is fine.
Thread moved to Q&A.
Hi
i flashed my Hero to Tegro-2.5 RC3, it worked ok several days but than i found out that sound stoped working! any - notification, media sounds etc. In setting there is everything set up on maximum sound. I know there must be some little problem....but i dont want to flash it again...
Try downloading "sound manager" and tweak the settings. For some reason my sms vibrate always stops working after a while after flashing a new rom. I use this to fix it, i heard you can delete it afterwards, but i keep it anyway. Give it a go
thank you for answer but it didnt help - quess i will need to flash it :-( The only strange thing is that it stopped workin "out of blue"...dont know why and how, and the only thing that works is speaker for phone call...
Help!
A while ago I used these forums to help when the headphones on my Galaxy S2 were very quiet by using the audio options in the developers options. This worked a treat, but I discovered a while after that, that the in car bluetooth had been affected and that I couldnt hear anyone anymore.
I tried to go back to the settings to change them, but discovered that along with ICS, the audio option no longer functions.
I have followed some of the other advice including restarting the phone, which did nothing, trying a full system wipe and reboot and restore, nothing, updating the firmware, nothing.
Does anyone know how I can access the audio options despite the daft lockout, or if there is something I can do to reinstate the original volume and audio settings that I screwed up as per above?
Cheers in advance for any help.
kenkanobi said:
Help!
A while ago I used these forums to help when the headphones on my Galaxy S2 were very quiet by using the audio options in the developers options. This worked a treat, but I discovered a while after that, that the in car bluetooth had been affected and that I couldnt hear anyone anymore.
I tried to go back to the settings to change them, but discovered that along with ICS, the audio option no longer functions.
I have followed some of the other advice including restarting the phone, which did nothing, trying a full system wipe and reboot and restore, nothing, updating the firmware, nothing.
Does anyone know how I can access the audio options despite the daft lockout, or if there is something I can do to reinstate the original volume and audio settings that I screwed up as per above?
Cheers in advance for any help.
Click to expand...
Click to collapse
Maybe try going to Gingerbread from ODIN and then back to ICS, just try it. Maybe it'll work
Nasty_z said:
Maybe try going to Gingerbread from ODIN and then back to ICS, just try it. Maybe it'll work
Click to expand...
Click to collapse
Thanks, but I am afraid that has not worked. Is there no way of accessing the audio options any more?