TG01 on again after shutdown, the error is only DOCOMO logo then black screen although the display light, someone please just for me and how to fix this error
Try a hard reset, if not maybe try flashing a new rom with the pin method.
Related
i have an o2 xda 2 that hang on power up at O2 screen then stuck there
i had tested sw reset and even hardware reset but same
i had flashing the rom also but still same
any bro out there who might be able to help me pls
Are you also getting GSM error?
not only gsm bro, with or without sim also when power on stuck on O2 screen
You could try flashing a new rom using sd card method then address any other issues once you get a working pda. One other thing is try removing battery overnight.
I have same issue. Even I have unplug the battery overnight. It is same. I try to download the offical ROM from seeO2 website and upgrade the ROM. (It can upgrade via service mode only.) But it get a error 114 when the upgrade in Radio ROM. After that the screen is same at O2 starting screen and hang (can't off the device).
Please give me help and advice.
Rambo
I only see the OS ROM version (1.60.00WWE) when the device startup and display "No GSM".
Please help!
cingular 8125 got stuck on ipl spl and numbers what can i do please anyone.
When you got the tri-colored screen, it's not bricked.
Do yourself a favour, please read before you act.
Download Original !! rom, and try to install it, don't pay attention to activesync (it won't work when in bootloader).
And please don't start multiple threads about the same subject.
sorry please forgive me, i solved my problem using love rom thank you for replying, i read so much info but not all is very much i might add.
My phone also is stuck
My phone is also stuck with the numbers at boot. How exactly did you fix it? It's not stuck in the tri-color screen but in the boot screen. It displays:
IPL 2.16.0001
SPL 2.16.0001
GSM 2.7.18
OS 2.26.10.2
just press and hold camera button then push reset button with stylus and voilá boot loader screen aka 3 stripes screen (red/blue/green) then just flash the love rom thats floating around here.
note. when connecting to pc in bootloader mode activesync doesn't seem to connect, but when you plug in the usb on the pc you will see the word usb on your phone on the down left corner meaning its connected and ready to flash.
hope all that is understandable, being spanish my mother language or however you spell that.
After flashing my XDA2 to WM5 3.5a, i've tried merging storage & extended rom to gain memory by following a thread on Airfagev. After doing a hard reset, i found out that my phone is not responding and all i can see are black horizontal lines on the screen w/out backlight. I tried soft resetting it but still it stays the same.
Though i can still put it on bootloader mode, it also wont finish reflashing and an error message appears that goes like this:
ERROR 100: Model ID Error
The ROM image you are trying to use is not designed to work with your Pocket PC.
Is there any way for me to fix this problem? I really need help from anybody who's knowledgeable enough in solving this problem coz' i am new in this field.
Pls. help.
Thanks in advance!
Yoo can use NOID utility for flashing
HimaUpgradeUt_noID.exe
bootloader
Thank you. I can now reflash my device to WM2003 but not to WM5.I think it's because of the bootloader which is v 1.06.Is there any way to change this to v 1.03?
Help pls.
Hello everybody,
Today I did the installation of CR86_THD_v6.5.0.0.3_Beta, the installation everything was quiet, I did all correct procedures and apparently everything was fine, in shelltool presented the complete message, and asked me to make a HARDRESET, did everything normal, he alloy, shows the bootscreen of HTC, then displays the screen where the version of IPL SPL GSM OS and it freezes, it does not come on screen, I wonder if someone has something that might help me.
He still carries the battery charger when connected to, and I imagine it just a mess because it binds to and usually only appears on the screen that the Qtek logo and the does not that screen TrueColor or it freezes on the screen that informs the version the SPL IPL, but I hope the lay experts help me ...
Thank you.
Sorry my poor english
problem solved
I am with the same problem. How did you solve this? Please help-me.
Help me please? Desperately I'm really need big help from Master of HTC Hermes expert in this Hermes section!
My device always appear has four colors (Red, Green, Blue, White) everytime I turn it on. Seems is like it's on bootloader / SPL mode everytime I turn it on & I can't turn it off except force to take off the battery. In Red color always appear HERM100 IPL-1.04 & HERM100 SPL-2.10.Olipro. And there always appear Serial in White color but when I try to connected with USB in PC it changes to USB.
I has try many times to flash my device but it always be ERROR [260] : UPDATE ERROR notification when I try to flash to Hard SPL.v7 or downgrade to Hard SPL.v5.2. I have been trying to flash via microSD but that not works too!
Even I try to flash my device to WM6.0 ROM using HER_DopodAsia_1237074_1060010_WWE_SHIP from http://www.htc.com/sea/SupportDownload.aspx?p_id=37&cat=2&dl_id=197 still won't work too!
What should I do then? Please help me!!!
Nevermind it's okey for now one. I never thought it works on my Dopod 838 Pro cause I use Hermes_SDCard Flashing method. I forgot to formated my microSD in FAT32 format. Now my device has back in normal, I love this device!!!