I made 2 roms from rom kitchen. 1 using the seimens mpc2003 and 1 using rogers 2003 mpc. I installed the seimens 1st and it worked perfectly. Then I got brave and installed the rogers one(they are my carrier). Now I have no more activesync connection nor does the unit see my SD card. I am at a loss on what to do. Can anyone help me?
Have you tried flashing correct rom version using the sd card method through bootloader, although your card isnt recognised by the wm2003 system it will probably be ok in bootloader. I am assuming you are referring to xda 1.
Flashing via SD-Card should work.
There are several Problem with the Rogers ROM.
I think, i will remove it from the kitchen.....
Stefan
rogers rom from the rom kitchen
thanks for the remedy. I read up on bootloader flashing, got comfortable with the process, flashed and was back upgain with the seimens rom wm2003. Thank you for everyones help. Stefan, you're right it would be an excellent Idea to remove from your site even if you warn people of the potential danger..
i have hspl 3 installed and have installed custom roms befor on this phone.
my problem now is that when i try to flash new rom it gets stuck on 0%, i have tried from the sd card and using RUU Custom installer with no luck .
also i have done a hard reset, also have tried to install HSPL3 again even that gets stuck at 0%.
Has anyone come across this before and is there a fix.
You said "i have tried from the sd card and using RUU Custom installer with no luck".
Why do you use RUU installer when flashing using a SD card?
All you need is a SD card with ROM in it, and start the flashing from the phone.
10pinto said:
Has anyone come across this before and is there a fix.
Click to expand...
Click to collapse
If you get really stuck just re-flash the rom that the phone came with - i.e. the official one from your mobile operator - and you should be fine. You can find them on the net if you don't have it (e.g. on the HTC web site).
You can then start putting custom roms back on it.
Good luck!
otherworld said:
If you get really stuck just re-flash the rom that the phone came with - i.e. the official one from your mobile operator - and you should be fine. You can find them on the net if you don't have it (e.g. on the HTC web site).
You can then start putting custom roms back on it.
Good luck!
Click to expand...
Click to collapse
yep tried that to, and it does not work.
it seem that my phone will not accept any roms just sits on 0%
i have tried the offical rom , custom roms via the sd card nothing works even tried to reflash hspl3.
Interesting, I'm having the same issue.
Grr.
Me too. I have rom 5.11.502.2 WWE, and I cannot get the RUU OR the Hard Rom flash to work.
This phone is a replacement for my Fuze that was stolen.
This newish phone is a WinMo 6.1 and I want to change the rom to 6.5-23568 Fuze Touch Pro.
WTF is making this stick at 0%?
cutenoob said:
Me too. I have rom 5.11.502.2 WWE, and I cannot get the RUU OR the Hard Rom flash to work.
This phone is a replacement for my Fuze that was stolen.
This newish phone is a WinMo 6.1 and I want to change the rom to 6.5-23568 Fuze Touch Pro.
WTF is making this stick at 0%?
Click to expand...
Click to collapse
if the version numbers you mentioned are correct, then you do not have a hd2.
Hi guys I have a HD2 (obviously says you's) that is locked to only installing Vodafone roms. Im stuck on rom 1.72 as Vodafone havent released any newer ones nor are they intending too!
I wanted to install hspl and install the newest htc stock rom. 3.03?
But I am aware that there is no hspl available that will allow you to do this.
So my question is, what is the newest Rom I can install that HSPL can do and where would I get it?
Thank you for your help
Mark
You can only install a stock Rom from your device.
This means if you have a branded device; you can only install stock rom this branded device.
BUT;
You have two solutions:
- Using a custom rom.
- Using the GoldCard solution/technique. in this case you can install stock rom 3.14
i'd suggest going for a custom ROM...the possibilities are endless, check out the ROM Dev. forum and pick the one that suits u best.
Hi thanks for your help. I'm trying the goldcard version now but need a little help please. When it says
1. Download your 3.14 Stock ROM from HTC, Links you will find here:XDA 623283
2. Extract your Stock ROM (RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.1 5 .50.14_LEO_S_Ship.exe)
3. Copy RUU_signed.nbh to your Goldcard and rename it to LEOIMG.nbh
(Use the “Explore” Feature of ActiveSync / MobileDeviceCenter)
What escatly does it mean? I have downloaded the rom which has a the name
"_HTCHD2_RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
What do I do to this now to extract it? When I double click on it it just opens the programme. Could someone help me please.
Thank you
Its ok I worked out how to extract the file thanks. Hopefully it works now
Its still not working.
When I turn the phone off after following all the steps and hold volume down and press power button the bootloader screen laods but it doesnt load the LEOIMG.nbh.
At the bottom it just says 'Serial'.
What am I doing wrong? I have followed all the instructions
Just a morning Bump
You most probably must Format your SD Card,but from my bitter experiance I would consider the steps very carefully before flashing from an SD Card,I was lucky to bring my HD2 back to life after a day of bicking it.
I myself installed the HSPL tried out many custom ROMS but so far couldnt find one without a bug,one thing I noticed common with all of them:my WIFI suffered badly that was my main reason to go back to the stock ROM,which has good WIFI reception now as my laptop!!.
Even the new Stock 3.14 reception was not up to my current one.
This is just my experiance.
Please Help Me
I have upgrade the HTC HD2, Windows To Nand Android 2.2
I want to return back to Windows Please help me
Why i want to Come Back
Reason 1: Too much battery consuming
Reason 2: Very Low voice during calls.
Please help me i have Installed
Android Version 2.2
Baseband Version: 15.37.50.07U_2.10.50.08_2
Kernal version2.6.32.15.g66f6ed7-dirty
I suppose you just needs to set your device into the bootloader mode, and flash your stock ROM
Help Help Help
Dear
I did not find any soloution
Can sombody help me.
Cuz The vice is very Low During Call in Nand Androind 2.2
Hellp Me
a.sohail said:
Dear
I did not find any soloution
Can sombody help me.
Cuz The vice is very Low During Call in Nand Androind 2.2
Hellp Me
Click to expand...
Click to collapse
dude there is so much information about this exact topic, just use the bloody search button. Or even just read a few topics like the magldr one etc.
a) plug in usb
b) boot into bootloader (volume down on power on)
c) flash your windows mobile rom.
or
a) rename the rom to leoimg.nbh and stick on memory card.
b) boot into bootloader.
kurt-willems said:
I suppose you just needs to set your device into the bootloader mode, and flash your stock ROM
Click to expand...
Click to collapse
I have done this HSPL 2.08 and ran the Custom RUU in windows. CustomRUU said that it had installed successfully then rebooted right back into Android. MGLDR says booting into Android 123456 etc. WTF?
Did you even try and flash a *stock* ROM?
dude, i have a similar problem, i installed chuckydroin rom in my mobile, as heard android works better in this ROM, but now i want to get back to original stock ROM, i had run CustomRUU, it said installed successfully, but still it boots to chuckydroid only.. help me to get stock ROM...
anirudh56 said:
dude, i have a similar problem, i installed chuckydroin rom in my mobile, as heard android works better in this ROM, but now i want to get back to original stock ROM, i had run CustomRUU, it said installed successfully, but still it boots to chuckydroid only.. help me to get stock ROM...
Click to expand...
Click to collapse
First thing to do, find the CORRECT stock rom for your device.
Second, extract the stock rom, find the file name: .nbh and rename it to: leoimg.nbh
Third, get a formated micro SD (sandisk 8GB or less, is okay) and put the file leoimg.nbh in the root directory of micro sd card
Four, make sure your battery capacity is more than 50%, turn of the device, and put your micro sd at the slot of the device.
Five, press VOLUME DOWN button and POWER ON button (keep pressing until the 4 colors screen appears on your device)
Six, follow the instruction on the screen.
Good luck
thanq.. i got the issue solved, Thank you
SPL - 2.08.0000 is stock spl, not hacked spl.
I Ran it again this time I chose 2.08.hspl and it solved everything
I did not find the soloution
I do the same steps mention above But
My Mobile Stop Here with the Folowing Message
Loading...
Please Help
HELP Please..........................
a.sohail said:
I did not find the soloution
I do the same steps mention above But
My Mobile Stop Here with the Folowing Message
Loading...
Please Help
Click to expand...
Click to collapse
Where did you get your ROM from?
From HTC Website
I Downloaded
RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
But No Soloution
a.sohail said:
From HTC Website
I Downloaded
RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
But No Soloution
Click to expand...
Click to collapse
Did you try the SD flashing method? If so what is the size of your SD Card?
You can put the phone into Bootloader Mode, then connect to the PC. Run the ROM (if Vista or Win7 then make sure you run it as an administrator). Sometimes you need to run it a couple of times. Try doing this flash without the SD card - it shouldn't make a difference, but it will at least eliminate a faulty SD Card.
I Checked all the process.
Even i tried
I Gb SD
4 Gb SD
8 Gb SD
and even i Tried from Windows 7 to update ROM
Nothing Working Fine
a.sohail said:
I Checked all the process.
Even i tried
I Gb SD
4 Gb SD
8 Gb SD
and even i Tried from Windows 7 to update ROM
Nothing Working Fine
Click to expand...
Click to collapse
Sorry to ask, but can you go into boot loader screen?
If the answer is yes, you still can flash the stock rom
Keep trying and retrying mate.
Try reformat your micro sd with fat32. Try different brand of micro sd (sandisk never fails me down )
Make sure the rom you downloaded is the CORRECT STOCK ROM and is not corrupt (be careful of interrupted download, it may corrupt the file)
Don't forget to extract the rom file using 7zip or winrar and find the file name "RUU_signed.nbh" and rename it to "leoimg.nbh" and copy it to the ROOT DIRECTORY of micro sd.
Make sure your battery is more than 50%
try to remove your sim card before flashing.
Now go into boot loader mode and follow the onscreen instruction
Good luck
Yes I Can go Into Bootloader
Even I purchased Yesterday a new 8 GB ScanDisk S Card.
I formatted it (Not Quick ) Fat32.
I Tried the Following ROMs
RUU_Leo_HTC_ARA_1.66.415.4_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
My Mobile Batter is 100%
After Extraction I Renamed (LEOIMG.nbh)
But I see the Following Message
Loading....
and after then nothing
I am Really Stuck
I badly Want to return Back in Windows.
Please somebody help me
Help Please
What happens when you reflash a hspl? I mean, I heard windows mobile roms where having difficulties with the hpsl 2 version, and needed the 3.
Be sure to check though, I only gopt my hd2 for a few days and am still very noobish with this phone, I got some experience with flashing though, before the hd2 I owned a touch pro for a year, before that phone I owned a HTC kaiser for a year, and before that I owned a ipaq 6515 (never was able to flash this one, no suitable roms).
I would like to get winmo back,i purchased leo with nandroid but i dont like it.
How can i know is it hardspl or what version is ? Thanks in advance.
Hello,
probably you might say "flashing is your risk" soo it took the risk, but the problem is i had original rom, but im unable to flash it, i tried recommened tools like Phoneix, Live tools and etc with 10 roms, no success...
I flashed wrong TWRP and that bricked my recovery with cyanogen mod 11.2 and now im stuck with plastic here, i tried flashing via bootlable micro sd card but as i try to make it, nothing shows into SD card even my sd card is fully functional, and im using adapter (sd card to larger SDHX, whatever its called), can anyone suggest me roms or how do i do it?
Board model number is tw a0721r v32
Thank you.