hey there,
yesterday i jumped to "year" view in calendar tab. now the tab hangs and even the softbuttons are wrong. they're like the tab i was before.
i tried to restart sense and softreset my hd2, but nothing helped.
any advice?
DN41
so if someone has a similar problem, try the following:
use a regeditor and change the following value:
HKEY_CURRENT_USER\Software\HTC\ManilareviousCalendarMode from 3 to 2.
i searched through the registry and i luckily found the right value 3 is for year view and 2 changed it to agenda.
greets,
DN41
Related
Ok, so I sucessfully flashed to WM6 (HERM_DOPODASIA_WWE_3.54.707.3_6275_CustomRUU) via HardSPLv7 using Mrvanx's superb guides et al.
BUT - I'm using a Vario II and I want to reassign the buttons that say Calendar & Contacts at the bottom of my screen. When I go into the Settings/Buttons I can only assign 5 buttons and not any of the bottom ones.
Is this because I'm using a Vario II and not a HTC device?
I've also noticed that I can't access T-zones (I quite like to access the mobile TV) as the icon has obviously gone - is the a .cab file for this?
I'm in the UK - I've seen people have sorted the US t-zones probs !
coz its for the softkey....you may try use the SKtools, softkey applet, or editing the registry to modify it
This might sound like a very daft question, but since I have the same problem where do I get SKtools app?
I'm sorry I took so long to reply to your post - I've been away! The application I used to get my buttons back was Soft Key v1.3 by FdcSoft 2000-2007.
I really can't remember where I got it from and worryingly I can't find it on my PC!
Soft Keys
Hi
Thanks for your response, but since making the post I found the Soft Key applet, located on the xda-dev ftp site here: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Soft Key Applet.CAB
It is exactly what I and many others were after.
Tim
I've been around for some years know reading and learning and have almost always found what I needed in this forums to have my devices working as I wanted them to work. This time I searched allover and can't find anything to help me out.
I have a sim card with two numbers (lines). When I switch lines the name of the line appears after the operator name and I always know what line I have active. Recently I flashed a new rom and now when I switch lines the name doesn't change. To have the correct name I have to reset my phone. Is there a way to fix this.
Thanks a lot
Cookie Home Tab Mods maybe?
are you using Cookie Home Tab? If so maybe you could look up this setting in the misc settings page in Cookie Home Tab Editor. If you leave it blank your provider name will appear. If you do not have CHT installed, maybe it will help you to accomplish this. I would install these Mods to look and see if it works. Good luck!
Thank you for your reply.
The provider name and the line name shows up fine. My problem is when I switch lines the name of the line don't change. I have to soft reset to make it change.
you would probably be best trying to get an answer from the whoever cooked the rom...
hope that helps
Thanks. I'll do that.
hi having a really bad day been using the search for 30 mins now and havn't found anything i was after. installed a facebook sense tab last night its knackered my sense so i've had to do a hard reset
can't seem to find a few things as the search isn't providing me with anything i'm after
anyone know the links to :-
cookie's hometab and editor
and that addon that adds the sms send button in to the messaging tab
i think thats it hope someone can help
tom
CHT is in Windows themes and apps subforum , not in hd2 forum,...for the send button registry hack, go the registry tweak setting thread, in the stickies , can't post links ..on phone
Sent from my HTC HD2 using XDA App
http://www.google.co.uk/search?q=co...s=org.mozilla:en-US:official&client=firefox-a
http://forum.xda-developers.com/showthread.php?t=583638
http://forum.xda-developers.com/showthread.php?t=631069
i got a puzzle for someone to solve.. my hd2 broke today, and i just got a new one. my problem is that i cant remember the nrg rom i had installed in it... here is a description of what the rom look like:
when it booted, it showed the black NRG screen, then the htc simply beautiful crap, then the orange windows page.
has cookies home tab.
has youtube tab.
has registry.
has clear ram.
has manila tv right before you get to the settings tab.
the rom has a weird name, its like a dude's name.
does not have the Footprints tab.
if you have any ideas on what it could be, please email me.... i've searched the hell out of google, but cant find it.
Could it be the energy rom, perhaps?
I dont recall an energy rom coming with the manila tv tab or clear ram for a long time if ever. I think somethings been flashed over an energy rom and the splash screen has remained.
Good luck lol
Has anyone else suffered from the Weather not being able to connect and update for the last 5 days or so? I don't think I did anything around the time it stopped to cause it
I'm on the Artemis 63.0 ROM on an HD2 with 6 world cities and "My Location". They have been working fine for 3 months or so. I only update when on WiFi or Active Sync and do my shares at the same time. Shares still work fine (as does everything else), just the Wx stopped with a "Connection Error". I have read through loads and tried "Cornflipper" which actually started "My Location" working correctly again (Village in Spain) but the other locations all fail with the same error. I tried switching to N2A (using Stylze (?) switcher) but all fail again so have reverted to Cornflipper. I believe when I set it all up ages ago I was using Accuweather as a server but I'm stumped now as can't remember where I went to set that up.
I realize it's probably something I've done but I've spent quite a few hours on it now and am getting a headache
Any ideas?
No problems at all here, but just read this:http://forum.xda-developers.com/showthread.php?p=21528198#post21528198 .... maybe useful
I'm experiencing the same problem. I'm on a standard ROM. Looks like accuweather.com is working, but not2advanced.com is not.
Had the same problem, checked poyensas link and deleted/changed the URL in the registry and now it's working again!
poyensa said:
No problems at all here, but just read this:http://forum.xda-developers.com/showthread.php?p=21528198#post21528198 .... maybe useful
Click to expand...
Click to collapse
Thanks so much poyensa.
Been going round and round but followed your link and on to http://forum.ppcgeeks.com/windows-m...-hct-weather-server-accuweather-directly.html where it gives the Accuweather server details and never realised you could input it from Weather City Editor. Dead easy and up and running again. Did try the reg edit first but even after reboot no success. probably got a letter wrong but couldn't sort it hence trying the ongoing links.
Thanks again
City code not appended to URL
Hi,
I've made the registry change to 'Weather.ServerURLOverride' as specified in poyensa's link (above), and I still cannot get my weather working.
I manually tried the URL in a browser, appending a city code, and the XML came back fine (so the city code I am using is still valid).
I modified the 'Weather.ServerURLOverride' registry entry, and inserted a test server host, so I could see what data/URL the weather update was sending, and this is what I got in the Apache log...
"GET /widget/htc/forecast-data_v3.asp?ac=TR2cra9U&locCode= HTTP/1.1" 404 526 "-" "HTC HTTP Service"
The 404 is expected, as this is my server, but as you can see, there is no city code appended after 'locCode=' in the URL.
I've deleted all of the city entries, added them back in, added others I'd not already tried, and soft-reset the device, but it appears that the weather no longer sends the city code.
If I append a valid city code to the registry entry, then I get the weather, but obviously this means that I can only have one city entry! So, this proved I'd not made a typeo in the registry.
Any help appreciated.
I'm using a stock O2 ROM, with CHT2. Has been working fine for ages, and like everyone else, stopped about 5 days ago.
Thanks
xdaConvert said:
Thanks so much poyensa.
Been going round and round but followed your link and on to http://forum.ppcgeeks.com/windows-m...-hct-weather-server-accuweather-directly.html where it gives the Accuweather server details and never realised you could input it from Weather City Editor. Dead easy and up and running again. Did try the reg edit first but even after reboot no success. probably got a letter wrong but couldn't sort it hence trying the ongoing links.
Thanks again
Click to expand...
Click to collapse
Went to ppcgeeks, input Accuweather server info using Weather City Editor, and problem solved!! Thanks a lot!
Reg entry removal seems to work
Hi again,
So I completely removed the 'Weather.ServerURLOverride' registry entry, and the weather started to work fine.
It looks like the 'Weather.ServerURLOverride' reg entry is not required.
Hope this helps someone else.
Thanks
I've been trying both the change of the registry entry and its removal. None of them worked. Any help in solving the problem would be rather appreciated. ROM is 3.14.408.2 (04666)ITA.
hi,
im looking for all the registry to add manually this city EUR|FR|FR022|ALLINGES.
Any ideas ?