T01A my back up when you insert the sim WM6.5 ROM into your computer asked for password, so I have to use sim sim graft transplantation was my fault or not, anyone know please just for me
Related
Hi All,
I tried to unlock and upgrade (ROM 2.11.255.1) my X01HT. Firstly it is going well, but after inserting my SIM card (sim doesn't belong to softbank japan) the phone couldn't read the SIM managers and there is a message in the top of the phone "Please wait 15 minutes". After that I tried to mount my extended rom, it was going well. Then I reset my X01HT and tried to replace my extended ROM with softbank extended ROM. But it is always failed to copy.
But if I insert my softbank SIM card, there is symbol "U" in the top of the phone (I think its UMTS). But usually it should be "3G".
Could any one help me on this problem ?
Thank you very much
BR
Az
Ok, i would like to know what the fucx is going on?? I have g4. I use softspl and it works fantastic. I did the hardSPL and now it shows after boot spl 21.1.olip , so, thats good. Problem is, that i cant flash roms with RUU in package, cause i get every time the message of Wrong upgrade tool ??? Other thing is, that the wizard Tool shows, that i have IMEI lock, but i can use slovenian sim in german phone?? Other thing, i trier sim-unlock with lokiwiz , i had the sim unlock code prepared to type it in. i change the operators sim, but the funny thing i didnt had to enter the pin and the sim was working- i could make a call. ?!??!?!?!?!?!?!?
What the heck is going on?? I use nbd 9.1, works as it should.I have eye on phone, autostarted , great app to get the info of other sim.
Thanks for infos
Do a search on the forum before you post.
This problem occured to several users, there fore equinoxe have had a special RUU from Mun in his HardSPL thread.
Try that RUU, it should work
Thank you. But what could be the problem with SIM??
badguy999 said:
Thank you. But what could be the problem with SIM??
Click to expand...
Click to collapse
did you sim unlock your phone? if not thats most likely the problem
I didnt, cause the phone didnt show me> Enter the code for unlock. The foreign Sim worked without entering the pin code. LOL
HEY man, i saw in the post of sSPL that when you was trying to start the START-sSPL.exe, you cant because cecopy.exe was doing an issue, but what did you do for solve this problem??
P.D: Sorry for my english
I must be thick as I have read more posts on this than I have had hot dinners and tried various utilities all to no avail although thankfully my Wizard still seems to work.
My O2 XDA-Mini s is about 2 years old and of course locked to O2 although the device come up as SIM Unlocked but CID Locked.
IPL - 2.21.0001
SPL - 2.21.0001
I am now on the Three network and would just like to get back to using the phone I love rather than the freebie I have now, so I am assuming I need to get CID Unlocked?
Having bothered to get to that stage I would want to scrap the O2 software and upgrade to a better ROM.
Sorry for being so stupid on this, I am hoping someone in the know can take the time to reply.
Thanks in advance
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
CID is only used for flashing, so if you want to upgrade to the better WM6 roms now available, you'd have to unlock it permanently (hard SPL) or use the Soft SPL.
Good luck,
EquinoXe
the-equinoxe said:
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
EquinoXe
Click to expand...
Click to collapse
Thanks for taking time to reply EquinoXe, you have confirmed what I had already thought.
The device reports "Invalid or missing SIM card" with the Three SIM card and WST v4.2.2 reports "Your phone is already SIM unlocked" ??
I do wan't to upgrade the ROM but more importantly I want to get the thing working with the Three SIM card, then I can worry about the ROM.
Any other suggestions will be gladly received.
Thanks in Advance
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
ashasaur said:
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
Click to expand...
Click to collapse
I have done this twice just recently but my G4 is not asking me to enter any unlock code. I read other threads where people had similar problems so tried a few times, device still comes up "Invalid or missing SIM card"
I ran EnableRapi from the device before running the batch file so I'm not sure what is going on or if it is something quirky about the G4 device??
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jackson>cd\
C:\>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ¨~äe├ÇÔ►-┴«p¦╚.;
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Strange, according to lokiwiz (and WST) you are sim- unlocked.
But clearly your three sim card won't be accepted.
I do remember that HTC had been messing with the bootloaders, had to downgrade one in order to unlock it too..
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
Just ignore the carrier ROMs, and only update (downgrade) the IPL/SPL with one attached to djharvey's thread (preferably the orange, because that one worked for me).
Flashing bootloaders can damage your device beyond repair, please use this method only if you are shure about the process, and know what you are doing. I am not responseble or liable for any damages.
Flash the IPL/SPL (takes a minute), then try again to unlock the phone.
Note: WM6.x needs IPL/SPL 2.19.xxxxx at least (works great with a 2.19), so if you have downgraded to a lower number, you'd have to upgrade again in order to run WM6.x .
Good luck,
EquinoXe
Same Problem
I have the same problem as the previous post. I downgraded from WM6.1 to a WM5.1 ROM and then ran lokiwiz - success!
I have now gone back to the original WM6.1 ROM and again I am locked out from my o2 SIM.
I am using: WM6.1 ROM Prophet My Green Edition http://forum.xda-developers.com/showthread.php?p=2116170
Any suggestions?
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.47.21
OS 5.2.19.209
the-equinoxe said:
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
EquinoXe
Click to expand...
Click to collapse
Thanks EquinoXe, I am going to try a T-Mobile, Vodaphone and Orange SIM later to see what results then maybe tomorrow try your last suggestion.
Thanks and I will post any results, hopefully not a flashy paperweight (~:
------------------------------
I have now tried T-Mobile, Vodaphone and Orange SIM cards in the Wizard and all work OK so unlocking was never the problem, obviously O2 is OK also as this was it's original branding.
So the problem is only with the Three SIM, I have an old T610 and T630 which I just put the Three SIM into with the same results.
Need to do a bit more reading on this but I thought this sort of restrictive trading practice went out with the monopolies issues, as it seems at the end of my contract it's not just a matter of me buying a phone of my choice, if I want a new handset I have to go with Three, who interestingly don't do XDA style phones, or change contracts.
More if it happens.
I'm guessing that the reason the 3 sim card won't work is because the Mini S isn't a 3G capable device - 3 is the only network in the UK that's 3G exclusive, hense why other (T-mobile, Vodafone, O2 and Orange) sims will work and the 3 sim card won't.
Hope this helps.
After i did a hardspl and installed wm6.1 my green edition my prophet is simlocked.I used the prophet tools and did the unlock and it gave me some password.But when i press the password it keeps sending me to the pin screen and it always ask me the unlock code.It says unkown sim status or something.What should i do?
When i did the sim unlock staff i had my one and only sim i use.
SHould i try to turn it on with a different sim card?Will it work?
Cause if i need to have the original sim card which was an orange sim card then i am screwed
Do you have an Orange branded Prophet? I think the ROM you are using is based on Cloudyfas latest ROM which puts the SIM lock back on on Orange branded Prophets! I had the same issue and so are no longer using that particular ROM...
So i have to use another rom?Can you recommend me another rom?
I need either a wm6.1 or a wm6 with greek characters.
i would prefer to keep the wm6.1 without the greek but can we do something to sim unlock it?
well use lokiwiz 3 it just provides you the code...do a search on lokiwiz 3 on the forum....keep win mobile 6 and unlock it through code..it's simple...any other question reply this...work safe
It doesn't persist though.
ROMs based on Cloudyfas latest ROMs have SIM Lock issues on Orange branded Prophets.
then the ultimate solution is get it unlocked at a unlocking point...you pay but at least you know you don't do stupid things...or do ass l3v5y says and change the rom....work safe
The issue is with the ROM, and not with the unlocking procedure.
Hello,
I have a problem.
I got my Wizard G4 (MDA Vario)
And it was simlocked now at first lokiwiz didn't work, so I decided to overwrite the ROM first and that's what I did. But I didn't read well, so now I have a wizard with a custom rom but it's not simlock free. Now at this point I do have the unlock code for my phone but when I put my sim in it. I can't find where to put it in.
Can someone help me please?