Related
Hallo I have a big Problem,
I cooked a ROM and flashed it on my MDA Vario 2. After Reset my device starts to boot an then it went out and starts again, ever and ever. Nothing else happens.
I tryed to go into Boot-Mode (left "OK" + "Power" + Stick Reset) but nothing happens.
What can I do, please help me
Swith your device off. Then go into bootloader mode (left "OK" + "Power" + Stick Reset(hold it))
Hey Ghz,
I did this but without any effect. The device was out, then I tried to go in bootloader mode (I did hold the two buttons and the Stick) but it went not in boot-mode. It starts again and again. I only can stop it by taking off the battery.
Have you try put in your charging/USB cable without installing the battery? After that try go get in bootloader mode.
I but the USB cable in (without battery). The LED went red. Then I made the Reset and tried to get in boot but nothing happens. Then I Put battery in. LED went orange. Then I tried the bootmode. But the device only tried aigain to boot again and again. I'm getting stupid with this thing. I can't get into bootmode.
When you say that "it boots over and over", how far is it getting in the boot process? What is the last screen that loads before it starts to boot again?
Also, have you tried reflashing with a known working ROM using SD Card method?
What version of SPL was on the device when you flashed this ROM?
Was the ROM you created an OS-only ROM or was there more? If there was more, then what else?
It starts booting. All numbers appear (at the bottem). Then, when normaly the "HTC" animation would start, it breakes and starts again.
It was an OS-Rom (3.61) with several other programms (I exactly don't know jet). The SPL was 1.04 I think (If that is possible).
I cooked the ROM and I forgot to add two other boot-screens I think. Because it breaks when the first boot-screen should appear (I think).
Flashing with SD Card was also without any effect. I think it breaks to early to boot from SD (Or may it be, because I can not enter the boot-screen?)
Sorry my erglish is not the best
boxbecher said:
It starts booting. All numbers appear (at the bottem). Then, when normaly the "HTC" animation would start, it breakes and starts again.
It was an OS-Rom (3.61) with several other programms (I exactly don't know jet). The SPL was 1.04 I think (If that is possible).
I cooked the ROM and I forgot to add two other boot-screens I think. Because it breaks when the first boot-screen should appear (I think).
Flashing with SD Card was also without any effect. I think it breaks to early to boot from SD (Or may it be, because I can not enter the boot-screen?)
Sorry my erglish is not the best
Click to expand...
Click to collapse
Don't worry about your English - it is very good.
Even if you did not put splash screens in your ROM, it would not be a problem, because it would just keep the ones that were already on the device.
I know that his does not help you, but it would have helped you to flash HardSPL, because it sounds like you *may* have corrupted the IPL or SPL, since you cannot put the phone into bootloader mode and it is not getting past the bootloader at startup. Unfortunately, I do not know a way to fix this. HardSPL would have prevented this, because it protects the bootloaders from overwriting. I wish I had better news. Maybe someone else can help...
The problem I'm having is pretty severe!!!
My HTC 8525 was working fine until I tried unlocking it via Hermes unlocking tool,
It started off well, booted to the progress screen, but did not move...
When i tried resetting it, it went back to the 4 color screen, red blue green, white...
At this point I tried a hard reset, which did nothing but go back to the same screen.
I then went to htc'a website to see if I upgraded my rom to WM2006 to see if I can get back into my phone, but it goes to %12 in progress, then just freezes up...
When looking at image version its being upgraded too, it shows blank, as the upgraded image shows something, whatever it may be...
I have tried other upgraded roms, as well, but to no avail...
I know their is something that can get done, due to the fact that i can get to my boot screen!
Some help would be appreciated!
THANKS!!!!
What version of SPL are you using on your device?
Try SPL V7
http://forum.xda-developers.com/showthread.php?t=296722
When I tried doing that my phone doesnt even detect anything..
Is their a way that could go ahead and just install the orirginal rom that came with it and the radio...
Isnt just like installing a new OS like Win XP Or vista?
I had a similar issue. Just flash back to an original ROM and you should be fine. It worked for me.
I know their may be a thread about this already, but I honestly have no idea how to flash back my rom!
The problem is with most of these rom upgrades etc is that you need to use activesync, but that would not be possible to do in my situation....
Please some simple basic instructions would be great!!!
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
ruff_ryder_v12 said:
I had a similar issue. Just flash back to an original ROM and you should be fine. It worked for me.
Click to expand...
Click to collapse
Um? How? I didn't think I could 'go back' ??
see this thread:
http://forum.xda-developers.com/showthread.php?t=356231
Hi there,
I have some problems, which I cant solve using your forum.
So Im posting this.
Yesterday my Leo shut down and I couldnt turn on it. Today I've trided Hard Reset, but nothing was made. i can turn my phone on with white screen only. So i decided to reinstal ROM. I'v set up the bootloader and start installing oryginal ROM for HTC. And the installation is going to 1 % and then the phone stops instalation and turns on with white screen only.
What an I doing wrong?
looking for original firmware for your phone on htc.com, using the S / N
I have the same problem !!!
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
you could try to flash with sspl. maybe you have installed the 3.14 rom and removed the hspl.
tycz said:
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
Click to expand...
Click to collapse
1.try task 29(find on xda) and after that installing HSPL3.
2.after this flash any rom (including stock but i wouldn't recommend newest as we don't have newest hspl and you'll be stuck with, or you will have very small ram(50mb) if you keep older one)
I can't run task 29 from bootloader, the same problem as with ROM, it stops on 0%.
maybe some advices how to run task 29 on bootloader, maybe im doind sth wrong?
I think we have the same problems,
aktiv sync dont work, bootloader modus works,
cant find any solution in the forums,
i have tried flashing from pc and from sd card, no success
what about couple of hard resets on boot(hold down volume buttons) and perhaps try another computer or USB cable-if your friend has one newer etc...
i know from the times i had Omnia that RUU can have probs with computer also.
And have a look at this could help..
i tried all of your tipps but nothing works.
Hspl 2 and 3 do not work.
Here my bootloader information:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Please help!
Did you update your ROM or Radio version? I read that white screen occurs due to incompatible Radio version.
Anyways, I screwed up my OS today by installing 'Gaz Touch Tools' and on reboot my phone showed some file was missing.. nothing was working.. phone wasn't responding well. couldn't even connect via activesync.. Right now installing Official ROM using MicroSD card.
Update in progress..
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
EXTROM -
^ as the progress bar increases, the blank spaces change to OK
What I did - Formatted the MicroSD using FAT32, extracted the RUU_signed.nbh from the exe downloaded from HTC website and renamed it to LEOIMG.nbh and copied it on MicroSD card. Inserted card properly in device, started device by holding volume down button. Voila!
Update: Done installing, working fine!
Got the same problem with mine straight out if the box. SPL-1.42.0000
Charging light not working. Sometimes it goes in to bootloader when powering on and sometimes white screen with logo. I'm not impressed!
Hello!
It's insane, here is the description.
The android booted up just in safe mode.
The winmo had faults, so I've decided to change the whole system, with task 29.
At first I've changed my radio to the 2_12_50_02_2 version.
Than I've started the task29, the one what do not needs the radio.
Thats all I've done, and now I cannot reach the boot loader, or anything else.
The vol up and start trick is not working.
Please give me a solution, I need this phone working, I need a solution, and I appreciate every tip.
Thank You in advance!!!!
its volume down, not up.
same problem for me here
i did task29 and it was all fine, 100% reached and then the HD2 did a reboot, stopping at the black screen with the white HTC logo.
then as always i removed the battery and put it in again, holding vol down und clicking power-up once.
nothing happend... the phone vibrated once and got back to the HTC logo.
NO bootloader!
please do not tell me i'm too dumb to enter bootloader, i've been flashing custom roms for 6 months now!
my latest rom was Goatrip 6.0 and HSLP is 2.08
yesterday when goa6 was still "alive" the volume-down button worked fine, so the problem cant be some dust or dirt beneath the buttons.
edit: i've also tried flashing via SD card (clean FAT32 formatted 2gb card) the original stock rom 3.14 and a custom rom,
none of them is working either
every single hint of how i could solve this issue would be great!
hope to here from u guys
Remove the SD card and try again to go into BootLoader mode.
i have tried all methods and variations but i cant enter bootloader...
now i have found this thread:
--eeeeek cant post links --
its referring to the TP2 but i thought i would give it a try!
i've done this sketchy voldown+power+usbcable+batteryplugin thing but no result, even after 10 attempts :-(
Since you removed the battery, are all the pins straight?
those 5 (2 1 2) pins are in good shape
i cant post a link yet, ill send it to u via PM
posting links enabled:
http://forum.ppcgeeks.com/htc-touch-pro-2/122134-task29-didnt-complete-cant-enter-bootloader.html
i got it!
my stepfather owns a HD2, too.
i plug mine into his docking station while i was on the phone with htc support... just because i was bored waiting in the queue.
after the phone call i tried once again to enter bootloader e voila => boooom 3 colour screen!
i dont know whats the reason for, but i flashed my custom rom as fast as i could and it works fine.
but even now i cant enter bootloader properly...for 10 times trying 2 times actually work!
in the WM Os its no problem, Vol-Down functionality is 100%
cant explain that to me,
i think u need some luck to get this issue solved
___EDIT___
now with my customrom i could easily enter the bootloader via software command
and therefore i downgraded HSPL to stock spl1.42.000.
after this i flashed 2.08.hspl again and NOW my bootloader is working as intended!
u see, once u can get into bootloader again, all your problems can be fixed.
without him, you're f*cked
greetings
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset