I tried to install Dcd Titan 2.1.0, It went through the ruu process succesfully, but when phone restarts it gets stuck in black HTC sceen past the Red model numbers. I tryied to use Exit boot loader, but restarted back to the same screen. I tried to connect active sync (all on Xp). tryied to install through RUU again, got an Error264 and recovery process went through there instructions, no luck. Been searching all over XDA sight,
I Have OLIPO 2.4 INSTALLED
Found that I should try Formating SD card to fat32, put 2.17 official in it, renamed to TITIMAG.nhb (OR SOMTHING CLOSE, done right on card).
I HARD RESET, AND IT WENT TO THE LOADING SCREEN AND HAS BEEN THERE FOR AT LEAST A HALF AN HOUR.
WHAT SHOULD I DO??????????
Keep waiting(WHICH I STILL AM)
Or does any one else have some suggestions
I hope this ain't bricked, Please tell its not
DCD's ROM do not include a radio. For the ROM to completely boot, you need to install the new radio ROM, which is mentioned in DCD's ROM threads. There is a thread on here with the 3.27 radio here.
looking at right
looking, but can i flash it to SD card
JonnyBoy313 said:
looking, but can i flash it to SD card
Click to expand...
Click to collapse
yea you can if ur card is FAT32
works for everyone else but me
Please Help Me
I have upgrade the HTC HD2, Windows To Nand Android 2.2
I want to return back to Windows Please help me
Why i want to Come Back
Reason 1: Too much battery consuming
Reason 2: Very Low voice during calls.
Please help me i have Installed
Android Version 2.2
Baseband Version: 15.37.50.07U_2.10.50.08_2
Kernal version2.6.32.15.g66f6ed7-dirty
I suppose you just needs to set your device into the bootloader mode, and flash your stock ROM
Help Help Help
Dear
I did not find any soloution
Can sombody help me.
Cuz The vice is very Low During Call in Nand Androind 2.2
Hellp Me
a.sohail said:
Dear
I did not find any soloution
Can sombody help me.
Cuz The vice is very Low During Call in Nand Androind 2.2
Hellp Me
Click to expand...
Click to collapse
dude there is so much information about this exact topic, just use the bloody search button. Or even just read a few topics like the magldr one etc.
a) plug in usb
b) boot into bootloader (volume down on power on)
c) flash your windows mobile rom.
or
a) rename the rom to leoimg.nbh and stick on memory card.
b) boot into bootloader.
kurt-willems said:
I suppose you just needs to set your device into the bootloader mode, and flash your stock ROM
Click to expand...
Click to collapse
I have done this HSPL 2.08 and ran the Custom RUU in windows. CustomRUU said that it had installed successfully then rebooted right back into Android. MGLDR says booting into Android 123456 etc. WTF?
Did you even try and flash a *stock* ROM?
dude, i have a similar problem, i installed chuckydroin rom in my mobile, as heard android works better in this ROM, but now i want to get back to original stock ROM, i had run CustomRUU, it said installed successfully, but still it boots to chuckydroid only.. help me to get stock ROM...
anirudh56 said:
dude, i have a similar problem, i installed chuckydroin rom in my mobile, as heard android works better in this ROM, but now i want to get back to original stock ROM, i had run CustomRUU, it said installed successfully, but still it boots to chuckydroid only.. help me to get stock ROM...
Click to expand...
Click to collapse
First thing to do, find the CORRECT stock rom for your device.
Second, extract the stock rom, find the file name: .nbh and rename it to: leoimg.nbh
Third, get a formated micro SD (sandisk 8GB or less, is okay) and put the file leoimg.nbh in the root directory of micro sd card
Four, make sure your battery capacity is more than 50%, turn of the device, and put your micro sd at the slot of the device.
Five, press VOLUME DOWN button and POWER ON button (keep pressing until the 4 colors screen appears on your device)
Six, follow the instruction on the screen.
Good luck
thanq.. i got the issue solved, Thank you
SPL - 2.08.0000 is stock spl, not hacked spl.
I Ran it again this time I chose 2.08.hspl and it solved everything
I did not find the soloution
I do the same steps mention above But
My Mobile Stop Here with the Folowing Message
Loading...
Please Help
HELP Please..........................
a.sohail said:
I did not find the soloution
I do the same steps mention above But
My Mobile Stop Here with the Folowing Message
Loading...
Please Help
Click to expand...
Click to collapse
Where did you get your ROM from?
From HTC Website
I Downloaded
RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
But No Soloution
a.sohail said:
From HTC Website
I Downloaded
RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
But No Soloution
Click to expand...
Click to collapse
Did you try the SD flashing method? If so what is the size of your SD Card?
You can put the phone into Bootloader Mode, then connect to the PC. Run the ROM (if Vista or Win7 then make sure you run it as an administrator). Sometimes you need to run it a couple of times. Try doing this flash without the SD card - it shouldn't make a difference, but it will at least eliminate a faulty SD Card.
I Checked all the process.
Even i tried
I Gb SD
4 Gb SD
8 Gb SD
and even i Tried from Windows 7 to update ROM
Nothing Working Fine
a.sohail said:
I Checked all the process.
Even i tried
I Gb SD
4 Gb SD
8 Gb SD
and even i Tried from Windows 7 to update ROM
Nothing Working Fine
Click to expand...
Click to collapse
Sorry to ask, but can you go into boot loader screen?
If the answer is yes, you still can flash the stock rom
Keep trying and retrying mate.
Try reformat your micro sd with fat32. Try different brand of micro sd (sandisk never fails me down )
Make sure the rom you downloaded is the CORRECT STOCK ROM and is not corrupt (be careful of interrupted download, it may corrupt the file)
Don't forget to extract the rom file using 7zip or winrar and find the file name "RUU_signed.nbh" and rename it to "leoimg.nbh" and copy it to the ROOT DIRECTORY of micro sd.
Make sure your battery is more than 50%
try to remove your sim card before flashing.
Now go into boot loader mode and follow the onscreen instruction
Good luck
Yes I Can go Into Bootloader
Even I purchased Yesterday a new 8 GB ScanDisk S Card.
I formatted it (Not Quick ) Fat32.
I Tried the Following ROMs
RUU_Leo_HTC_ARA_1.66.415.4_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
My Mobile Batter is 100%
After Extraction I Renamed (LEOIMG.nbh)
But I see the Following Message
Loading....
and after then nothing
I am Really Stuck
I badly Want to return Back in Windows.
Please somebody help me
Help Please
What happens when you reflash a hspl? I mean, I heard windows mobile roms where having difficulties with the hpsl 2 version, and needed the 3.
Be sure to check though, I only gopt my hd2 for a few days and am still very noobish with this phone, I got some experience with flashing though, before the hd2 I owned a touch pro for a year, before that phone I owned a HTC kaiser for a year, and before that I owned a ipaq 6515 (never was able to flash this one, no suitable roms).
I would like to get winmo back,i purchased leo with nandroid but i dont like it.
How can i know is it hardspl or what version is ? Thanks in advance.
Hi, I have HTC surround that has been flashed with DFT Rom and now it hangs on logo. After flashing with RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE
situation is still the same. I think i need original AT&T rom to recovery this brick?
Or may be exists some other ways?
GenePr said:
Hi, I have HTC surround that has been flashed with DFT Rom and now it hangs on logo. After flashing with RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE
situation is still the same. I think i need original AT&T rom to recovery this brick?
Or may be exists some other ways?
Click to expand...
Click to collapse
I believe your SD card is bad, you need to replace it. Then reflash.
Without memory card device works good. But when i instert new card and reflash it again hangs on startup HTC logo.
Where was a liquid in a memory card slot. It just needed hardware repair Problem solved
Hi all,
So my phone won't boot past the white HTC screen. I'm able to boot into recovery, but that's it. I'll go into recovery and try to flash an assortment of ROMs, but it never gets past the HTC screen. It gets to the HTC screen, stays there for 15 seconds or so, then reboots back into the screen.
I'm 1.4 S-OFF. Any help would be greatly appreciated!
Thanks!
Twist: When I boot it with the SD card in, it doesn't work.
When I boot it with the SD card out, it doesn't work.
BUT When I boot it with the SD card out, then slide in the SD card while the white HTC screen is on, then it boots. Wtf. Anyone have any ideas?
first thought, did you wipe cache/dalvik/data?
second, GSM or CDMA?
if all else fails just run a RUU to get things back to a functional state
dessolator666 said:
first thought, did you wipe cache/dalvik/data?
second, GSM or CDMA?
if all else fails just run a RUU to get things back to a functional state
Click to expand...
Click to collapse
I've tried wiping everything, flashing AOSP ROMs, Sense, all of them. I'm CDMA.
Something else: When I install 4EXT recovery, I can't boot into recovery. It gives me white screen reboots like in the OP. But when I'm on Clockworkmod, I can boot into recovery.
Gonna try a RUU when I get home :\
Did you do anything just before this started happening? For instance, did this problem start immediately after you tried to flash a new rom?
I'd be really interested as to why you were able to get it to boot by putting the SD card in mid-boot. I honestly have no idea if an SD card is required for an android phone to boot (never had a need to try). Are the connections on your SD card, or that port, somehow degraded or dirty?
the card is not needed, all boot relevant info is in the phone itself.
it's unlikely that the problem is in the card slot, I would have to assume that the problem is software related, maybe it's trying to read some data it doesn't have access to? mind you it still wouldn't hurt to try and check the card for errors (an external card reader would come in handy)
ok, just out of curiosity, when you go into CWM and clear: cache then dalvik then cache and data, do u get an error after it's done?
how'd the RUU go?
Hello,
probably you might say "flashing is your risk" soo it took the risk, but the problem is i had original rom, but im unable to flash it, i tried recommened tools like Phoneix, Live tools and etc with 10 roms, no success...
I flashed wrong TWRP and that bricked my recovery with cyanogen mod 11.2 and now im stuck with plastic here, i tried flashing via bootlable micro sd card but as i try to make it, nothing shows into SD card even my sd card is fully functional, and im using adapter (sd card to larger SDHX, whatever its called), can anyone suggest me roms or how do i do it?
Board model number is tw a0721r v32
Thank you.