After I flashing my Tmous HD2 to Hspl3 and Radio Rom 2.14.50.04 and OzRom, my camera not work.
When I start the camera, this error will be shown:
"unable to initialize camera. Failed to set up the camera device."
I Flash it back to original tmous Rom and Spl but the camera don't work.
First time I flash the wrong Rom, so the mobile phone was dead, a friend repair it with Jtag. Could he or make he a mistake?
****sorry for my bad english***
Related
hi guys,
trying to upgrade the radio rom, im using the customRUU and its getting to about 99% and then its getting the error 290: invalid command.
and now it only boots in the red, green, blue and white bootload screen.
heres some info if it helps:
SPL-1.42.HSPL on my hd2..
windows 7 home premium, (i tried running as admin, no difference.. also tried several other usb ports)
help would be appreciated!
thanks guys!
have you tried a good ol MTTY or Task29 before flashing?
does the phone boot to RGD screen?
what Radio you using?
And you have the phone HSPL unlocked?
dodgy download perhaps? tried another radio?
did anyone find the solution to this problem??
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
What exact ROM versions have you tried, and what SPL or HSPL do you have showing in bootloader? Also is there a radio currently on your HD2 and what is that radio if so?
normally phone hd2 leo and italy not t mobile ant spl 208 hardspl maked bootmode okay ( also write boot with jtag ) radio ver 2.15.50.14
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
I had the same problem. I was trying to restore my phone to original firmware, due to issues with custom firmwares. I had managed to extract the NBH from the installer provided by my carrier, and used CustomRUU to flash the phone, but the phone was not booting.
I then flashed one of the EnergyROM builds onto my phone.
After that I could not get the original firmware onto the phone, error 290 at 9%.
I booted my phone into the bootloader (red/blue/green), and used HSPL2 to set SPL to 1.42.HSPL. I could then flash the original firmware.
My phone is now working fine, as best I can tell.
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now
After I flashing my Tmous HD2 to Hspl3 and Radio Rom 2.14.50.04 and OzRom, my camera not work.
When I start the camera this error will be shown.
"unable to initialize camera. failed to set up the camera device."
I Flash it back to original tmous Rom and Spl but the camera didn't work.
First time I flash the wrong Rom, so the mobile phone was dead, a friend repair it with Jtag.
But what's the problem with the camera?
****sorry for my bad english***
help me for this message : "unable to initilize camera failed to set up the camera device"
my camera dont work,why?help
1. What ROM are u using, or stock?
2. Did u soft-reset (and if it doesn't help hard-reset) your device?
thanx,i use mozart rom v6.5.5.0.3,and then this error ,i use official rom htc.com for diamond2 but bug dont fix, i do several reset but....;help
this error for several htc mobile:
After I flashing my Tmous HD2 to Hspl3 and Radio Rom 2.14.50.04 and OzRom, my camera not work.
When I start the camera this error will be shown.
"unable to initialize camera. failed to set up the camera device."
I Flash it back to original tmous Rom and Spl but the camera didn't work.
First time I flash the wrong Rom, so the mobile phone was dead, a friend repair it with Jtag.
But what's the problem with the camera?
Hello,
I am now an owner of HTC HD2 device, and so far I kinda like it. Except that I had a message saying "can not initialize camera. fail to set up camera device" when opening the camera application and the camera did not work. I then flashed one of the latest official roms and had the same message appear. Flashed it once again and so far it works ok, but I am not sure if problem is fixed because the issue appears occasionally.
Please, could anyone explain if the hardware (camera) is showing symptomes of an imminent failure, or some software issue.
I will be extremely grateful, because it really bothers me a lot.
When I go to use camera it states failing to initialize camera failed to set the camera device ans closes the app. Recently loaded wm6 with dcd rom. tried installing Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX and now cant uninstall that file. any suggestions
well if that error comes up even on official roms i have no other solution for you.
sometimes it's a problem with a new rom but in your case i have no clue...sorry
I was wondering if anybody could help me. My phone is stuck in bootloader mode. it starts up in bootloader no matter what i do. I have tried task29, flashing original rom, flashing other roms, and from SD-card. the result is allways the same. What pussles me is that when i try to flash, it all looks normal, i get it up to 100%, and when it restarts it just goes right to bootloader mode. Tried to put Leoimg.nbh to Sd-card, and the bootloader glitches for a secoud saying loading, but then it goes straigth back to the bootloader again.
If anybody got any advice it would be grately appriciated.
I am using Hspl 2.08
Might there bi a chip or something that is broken?
The radio ROM might be corrupted
Try flashing a new radio ROM, it should fix your problem.
If you trying to flash android to your phone hspl 2.08 is the right one, but your need a Radio rom that support 576MB trick.
But you said that you flashed the original (Newest) rom, then you need the right spl to run 3.14ROM, it needs to be 3.03.xxxx for 3.14 and you have 2.08.xxxx
Run hspl4 choose 3.03.0000 or 3.03.Hspl and reboot.
G
kmaarud said:
I was wondering if anybody could help me. My phone is stuck in bootloader mode. it starts up in bootloader no matter what i do. I have tried task29, flashing original rom, flashing other roms, and from SD-card. the result is allways the same. What pussles me is that when i try to flash, it all looks normal, i get it up to 100%, and when it restarts it just goes right to bootloader mode. Tried to put Leoimg.nbh to Sd-card, and the bootloader glitches for a secoud saying loading, but then it goes straigth back to the bootloader again.
If anybody got any advice it would be grately appriciated.
I am using Hspl 2.08
Might there bi a chip or something that is broken?
Click to expand...
Click to collapse
The 3.03.0000 SPL or 3.03 HSPL has nothing to do with your problem I promise you.Tthe only reason you would need that SPL or HSPL version is to fool your HD2 into thinking it has the same amount of RAM as the TMOUS model of the HD2. The 3.14 ROM will still flash with the 2.08 HSPL you have.
It sounds like your volume down button might be stuck down as the volume down button has to be pressed down during boot up to get to the bootloader. So check your volume down button and see if if is stuck in the down position. If so this is your problem and I suggest flashing the stock ROM for your HD2 via SD card. This will put you back to complete stock and you will be good to send your HD2 in for warranty repair or exchange.
Please Help ! I read lots of pages in forum, but can't find what I'm doing wrong. I want to get HSPL working to able to instal custom ROM to use Nokia apps, witch are way better than HTC and Marketplace apps.
Phone, HTC Radar 4G T-Mobile US
Windows Phone 7.8 (pushed on update with seveneight tool)
OS Version 7.10.8858.136
Firmware vers. 1600.2200.20402.531
Hardware revision: 0002
Radio vers. 16.23.05.13_16.30.00.23U
Radio hardware vers. 2.16.0.D4
Bootloader vers. 2.5.160015.3(137079)
Here is what I did, I flashed using Goldcardtool with Y-cable, OMEGIMG.nbh. I think flash did not finished properly, it went too fast, phone rebooted to SPL , plugged in to PC used DFT_HSPL_WP7SG1_INSTALL, install finished OK , but when I boot up to HSPL mode it does NOT connect to PC.
(Using ROMUpdateUtility getting connection error (260))
Here is how my screen looks in HSPL mode;
PI06110
HSPL2.5 1600.3(137079)
eMMC SMS 7376,FA31
CotullaH(F:80,ID:10,V20,B:AA)
Radio-16.23.05.13_2
F400
Please Help, what I'm doing wrong ? Why my HSPL have F400 error ?
Thank You so much !
Problem fixed. After HSPL install needed second time boot to USB Host mode and this time radio installed correctly. All good now, time for custom ROM
newappz said:
Problem fixed. After HSPL install needed second time boot to USB Host mode and this time radio installed correctly. All good now, time for custom ROM
Click to expand...
Click to collapse
Flash the radio also.