Related
am kinda of a rookie on diz... my vibrant stays stuck on the " samsung vibrant screen...it goes in to download made and recovery as well... and have the correct drivers and odin and the files that i need.... the only problem is my stupid ass computer wont recognize my phone... can some one help plz
Odin wont recognize it even in download mode? Once you put it in download mode have you tried unplugging it and plugging it back in while Odin is on? It should say com6 in yellow in the box on the top left
Also, what were you doing when it bricked? What mods have you done?
Sent from my SGH-T959 using XDA App
kush815 said:
am kinda of a rookie on diz... my vibrant stays stuck on the " samsung vibrant screen...it goes in to download made and recovery as well... and have the correct drivers and odin and the files that i need.... the only problem is my stupid ass computer wont recognize my phone... can some one help plz
Click to expand...
Click to collapse
Install Kies Mini on your PC that should install the correct drivers, then use the latest version of ODIN.
kush815 said:
am kinda of a rookie on diz... my vibrant stays stuck on the " samsung vibrant screen...it goes in to download made and recovery as well... and have the correct drivers and odin and the files that i need.... the only problem is my stupid ass computer wont recognize my phone... can some one help plz
Click to expand...
Click to collapse
Try this first: Google: "Froyo that does not brick"
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Remove then insert battery. Then try holding volume down and home button while holding power button. Will it go to download mode? If yes, read hubix's tutorial in the development subforum it's a sticky thread.
praisegod1 said:
Hello friends,am in serious need of help,i plug in my ace to my computer using the cable and kies detected a new firmware which i tried to update to,after downloading finish to 100%,my phone restarted and shows downloading on the screen,for like 1hr it didnt change to any other thing and kies couldnt detect the phone,so i disconnected it from the cable,i removed the battery and inserted it again,now the phone can start up but all i can see on the screen is a computer icon with a phone icon,i dont know what to do,pls help...anybody with useful information or solution should post it here thanks.l
Click to expand...
Click to collapse
Next time , use ODIN for flashing firmware . Kies was NEVER EVER reliable .
go to recovery mode perform a factory reset/data wipe that should fix it
Please use ODIN and flash with the one-package file from samfirmware. I did the same when Kies bricked my phone too while upgrading to Gingerbread. It works!
er.davinder said:
go to recovery mode perform a factory reset/data wipe that should fix it
Click to expand...
Click to collapse
Nope, there is no recovery mode accessible either when Kies bricks your phone. Happened to me so. Just a stupid screen with a computer and phone icon with <!> in between them. But anyway my suggestion above of using ODIN should help him out. =)
I am just sharing my experience and hope it helps.
DISCLAIMER: I am not responsible for bricking any phone and/or pc. I am not responsible for any phone or pc damage done by my message here. You are responsible for your own pc and phone. You are responsible for taking risk of upgrading your phone or pc. I just shared my experience in hope if it helps someone.
I had bricked my phone once where I could just see black screen and after some tries white screen and nothing. I removed SD Card and SIM Card and kept it aside. I then removed battery and tried putting phone in download mode. It still did not work then I waited 4-5 min and then inserted battery again. Then I tried putting phone in download mode and it successfully gone in download mode. Then my phone was not getting recognized thru USB cable for ODIN. I changed USB port still same issue then restarted my PC and then I connected phone to USB port and finally got Froyo installed again on my Galaxy Ace thru ODIN.
My phone is bricked
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
buisness_life said:
i had samsung galaxy ace gt-s5830 i've rooted my phone and install the super one click to unlock my phone when i restarted the phone its just wont boot the screen goes black and white but i can still access to my download mode i tried to install a new frimware to bring it back to life using odin but is till have the same problem please help and when i flash it using odin it gave me the blue screen that the phone flash pass but it just not booting all what give the screen goes white and black thats it can anyone help me pleasde and i woulf be so thanfulllll please help
Click to expand...
Click to collapse
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
EmoBoiix3 said:
Is it stuck at the Galaxy Ace sign or the boot animation ?
Sent from my MSM7227 with Adreno 200 using XDA App
Click to expand...
Click to collapse
boot animation
Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100
first i bricked my fascinate by putting on samsung charge rom. so i did the mod all went well. got the computer to see the phone and all goes well till it gets put into download mode then the computer stops seeing it. tryed hooking it up to windows pc and it sees it but dont recognize it please help
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------