I have a problem with the Home screen. Something is wrong with its visualisation and also when I press the alarmpart nothing happens, but the alarm still works if its set from the options in the settings menu. The thing is that this happened after I flashed to ROM 3.14.405.2 WWE with Radio 2.15.50.14. Any ideas what should I do?
bqlkovich said:
I have a problem with the Home screen. Something is wrong with its visualisation and also when I press the alarmpart nothing happens, but the alarm still works if its set from the options in the settings menu. The thing is that this happened after I flashed to ROM 3.14.405.2 WWE with Radio 2.15.50.14. Any ideas what should I do?
Click to expand...
Click to collapse
Did you flash with ore without HSPL?
It's strange to see this on your device wile in the same time I have test the Stock Rom 3.14 (NLD) ass well without this issue!?
I had HSPL 1.42 I think, so I used the HSPL2_run program to make it 1.42 as requested by the setup of the ROM. Everything installed correctly, the phone works fine. It's just this graphic thing that doesn't work. Maybe it's the HTC sense or the Manilla ?
bqlkovich said:
I had HSPL 1.42 I think, so I used the HSPL2_run program to make it 1.42 as requested by the setup of the ROM. Everything installed correctly, the phone works fine. It's just this graphic thing that doesn't work. Maybe it's the HTC sense or the Manilla ?
Click to expand...
Click to collapse
Sir, HSPL isn't compatible with Stock Rom 3.14!!!
So remove HSPL, and reinstall stock rom 3.14 correctly without HSPL!!!
Sorry for the missleading information. I ment that I changed from HSPL to SPL 1.42. So it's not that.
bqlkovich said:
Sorry for the missleading information. I ment that I changed from HSPL to SPL 1.42. So it's not that.
Click to expand...
Click to collapse
bqlkovich said:
I flashed to ROM 3.14.405.2 WWE
Click to expand...
Click to collapse
sorry; Now I don't can follow you.
How you can have SPL 1.42 on Stock Rom 3.14??
I don't get it??
If you have stock rom 3.14 you have normally SPL 3.03
ore are you on a other rom version?
Damn me, I'm really bad at explaining. That 1.42 was before I flashed. After I flashed everything is as it should be. I think the ROM and the SPL and the radio don't have anything to do with my problem. Is this a better explanation ?
I reflashed and everything is back to normal.
bqlkovich said:
I reflashed and everything is back to normal.
Click to expand...
Click to collapse
Nice to see it's working correctly now.
The problem was in the application: Vovichek&Jamrecords_16Shortcuts
Related
Fellas,
2 questions about hspl and sspl,
1- It is said that HSPL can be removed from the phone right after the flashing is complete. Does the removal of the HSPL necessarily result in the ROM on the phone also getting removed/returning to its former version? I mean, is there any way to remove ONLY the hspl and actually keep the ROM new version that has been just flashed by the hspl?
2- After utilising SSPL for flashing a phone, the word “hspl” obviously will not be seen in the bootloader. I wonder if there is any way to find out if a phone has been sspl’d ( of course if the phone is flashed with a stock rom, not a cooked rom! )
Thank you
Meteorite-The-Second said:
Fellas,
2 questions about hspl and sspl,
1- It is bee said that HSPL can be removed from the phone just after the flashing is complete. Does the removal of the HSPL necessarily result in the ROM on the phone also getting removed/returning to its former version? I mean, is there any way to remove ONLY the hspl and actually keep the ROM new version that has been just flashed by the hspl?
2- After utilising SSPL for flashing a phone, the word “hspl” obviously will not be seen in the bootloader. I wonder if there is any other way to find out if a phone has been sspl’d ( of course if the phone is flashed with a stock rom, not a cooked rom!)
Thank you
Click to expand...
Click to collapse
i think you can remove the hspl with leaving any affects on flashed rom.
mon_money said:
i think you can remove the hspl with leaving any affects on flashed rom.
Click to expand...
Click to collapse
Hey, thanks for the reply.
Is this what you are advising? >> http://forum.xda-developers.com/showthread.php?t=623402
hspl yes you can remove hspl immediately and the rom will work fine.
sspl during the flash if you watch carefully when the phone enters bootloader, your spl changes to 1.42.6666
as soon as the phone restarts after the flash, your spl is back to what it was, no trace.
samsamuel said:
hspl yes you can remove hspl immediately and the rom will work fine.
Click to expand...
Click to collapse
Is it the way of going about this?
http://forum.xda-developers.com/showthread.php?t=623402
or does the above mentioned remove hslp AND AT THE SAME TIME change the ROM as well?
samsamuel said:
as soon as the phone restarts after the flash, your spl is back to what it was, no trace.
Click to expand...
Click to collapse
I have heard that RADIO doesn't change during sspl, is that correct? But I guess if someone sspl the phone with the same ROM version (only different in language, like when someone changes his CHN 3.14.xxx rom into WWE 3.14.xx), then the radio version will also ok and will leave no trace... right?
Thank buddy
Why do you keep posting questions in the 'Rom Development' pages? Carry on with your moans and groans in the proper Q&A pages and stop cluttering these pages even more with your inane drivel.
If I were the poor seller, who sold you the HD2, I would have shot myself by now!!
p.s. The information you need is here if you need guidance: http://forum.xda-developers.com/showthread.php?t=713942
Meteorite-The-Second said:
Is it the way of going about this?
http://forum.xda-developers.com/showthread.php?t=623402
Click to expand...
Click to collapse
well that will remove it, but will wipe your rom, meaning you will be back to a stock rom.
run hspl2.exe and choose 1.66.0000 or 2.08.0000 or 1.42.0000, thats it, hspl gone.
or does the above mentioned remove hslp AND AT THE SAME TIME change the ROM as well?
Click to expand...
Click to collapse
correct, that only works with your stock rom.
I have heard that RADIO doesn't change during sspl, is that correct? But I guess if someone sspl the phone with the same ROM version (only different in language, like when someone changes his CHN 3.14.xxx rom into WWE 3.14.xx), then the radio version will also ok and will leave no trace... right?
Click to expand...
Click to collapse
sspl cannot be used to flash radios, in teh way that hspl allows it, but im not really sure how it handles stock roms that include radios. The radio in teh twio roms you mentioned is identical/almost identical anyway, so it doesn't matter.
if its warranty you are worried about, its the hspl bit you should worry about, the rom and radio doesn't seem to matter.
Prozac69 said:
Why do you keep posting questions in the 'Rom Development' pages? Carry on with your moans and groans in the proper Q&A pages and stop cluttering these pages even more with your inane drivel.
If I were the poor seller, who sold you the HD2, I would have shot myself by now!!
p.s. The information you need is here if you need guidance: http://forum.xda-developers.com/showthread.php?t=713942
Click to expand...
Click to collapse
Fair enough. You are right
samsamuel said:
well that will remove it, but will wipe your rom, meaning you will be back to a stock rom.
run hspl2.exe and choose 1.66.0000 or 2.08.0000 or 1.42.0000, thats it, hspl gone.correct, that only works with your stock rom.
sspl cannot be used to flash radios, in teh way that hspl allows it, but im not really sure how it handles stock roms that include radios. The radio in teh twio roms you mentioned is identical/almost identical anyway, so it doesn't matter.
if its warranty you are worried about, its the hspl bit you should worry about, the rom and radio doesn't seem to matter.
Click to expand...
Click to collapse
Thank you a ton samsamuel. You are always so helpful.
P.S.
Question answered. Thanks
hey mates,
i asked myself, if its possible, to have the 1.66 Stock ROM on my HD2 and a .50 radio to get access to android and the whole ram?
the rom itself contains a .51 radio..
any advice?
thanks in advance,
DN41
.50 radio is compatible with stock 1.66.
Of course when you have a => 2.08.50 Radio you can use Android.
But install a .50 radio on EU stock ROM will not de-block the 576MB RAM!
mh..so if i want all the ram, i need to install a costum one?
do you know why it does not "work" with eu roms? a driver?
DN41
DN41 said:
mh..so if i want all the ram, i need to install a costum one?
do you know why it does not "work" with eu roms? a driver?
DN41
Click to expand...
Click to collapse
Yes you need a custom ROM who is build on a T-Mous build.
In fact the custom ROM's you can find here who de-block's (in theory) the 576MB RAM used at the base a T-Mous build in combination with a .50 radio. (Thy don't use the EU ROM)
ok thanks
again and again you're very helpful... thumps up!
DN41
DN41 said:
ok thanks
again and again you're very helpful... thumps up!
DN41
Click to expand...
Click to collapse
You're welcome sir.
one question mate: i have a t-mobile ger branded device.
i installed the 1.66 rom. everything worked fine. i uninstalled hspl and installed 1.66 spl again.
suddenly the device reboted. now its stuck at white htc screen.
if i hardreset it, it boots up to windows mobile screen then resets and gets stuck again..any advice?
DN41
DN41 said:
one question mate: i have a t-mobile ger branded device.
i installed the 1.66 rom. everything worked fine. i uninstalled hspl and installed 1.66 spl again.
suddenly the device reboted. now its stuck at white htc screen.
if i hardreset it, it boots up to windows mobile screen then resets and gets stuck again..any advice?
DN41
Click to expand...
Click to collapse
Download the official 1.66 Ger. T-Mobile Stock ROM, and install again.
why? it should perfectly work with the nonbranded one as well...
i have my hd2 for 1 year now...last week i got a new one.
the old one ran 1.48 (nonbranded) perfectly...
now i got the new one and wanted to have a clean htc rom.
so i installed hspl 1.66, ran RUU (nonbranded 1.66) and then it seems to work fine as mentioned.
but then the problem occured...
i put the phone into bootloader and ran the 1.78 RUU T-Mobile.
now the device works again.
but why doesnt it work with the nonbranded one?
DN41
if you wanted a stock 1.66 but with 576 ram,. you could use a kitchen to build a pure stock 1.66 rom (its dead easy to get an empty kitchen and dump a stock rom into it, its the work of an evening to build your first rom) but swap the file nk.exe for the one out of a tmous rom. Run that with a tmous radio, and the ram will be unlocked. (I believe thats the only required file)
DN41 said:
why? it should perfectly work with the nonbranded one as well...
i have my hd2 for 1 year now...last week i got a new one.
the old one ran 1.48 (nonbranded) perfectly...
now i got the new one and wanted to have a clean htc rom.
so i installed hspl 1.66, ran RUU (nonbranded 1.66) and then it seems to work fine as mentioned.
but then the problem occured...
i put the phone into bootloader and ran the 1.78 RUU T-Mobile.
now the device works again.
but why doesnt it work with the nonbranded one?
DN41
Click to expand...
Click to collapse
If you will install the non branded ROM, you need to use HSPL. (In this case it will works normally)
i thought i only need it to install the rom and not while using it?
thanks samsamuel.
so...the 1.78 rom gets also stuck at bootscreen..no red letters down there...
i guess the device is defective?
i give it one more try and then i call t-mobile for a new device.
DN41
ok..got stuck again.
hardresetted, phone booted..i installed advanced endkey...phone rebooted and now its rebooting on and on...it gets to bootscreen (without red letters) and then restarts again and again.
everythings stock.
defect?
DN41
£1 says you've bent a battery pin.....
for info, i have often run roms having removed hspl, that shouldn't be a problem (in fact i'm currently on cooked 2.13 with 2.15.50 radio from 3.x and spl 1.66.0000)
as for using a ..50 radio on stock rom without hspl, 5 minutes ago i would have said it would be fine but i'll reserve judgement since reading this.
samsamuel said:
if you wanted a stock 1.66 but with 576 ram,. you could use a kitchen to build a pure stock 1.66 rom (its dead easy to get an empty kitchen and dump a stock rom into it, its the work of an evening to build your first rom) but swap the file nk.exe for the one out of a tmous rom. Run that with a tmous radio, and the ram will be unlocked. (I believe thats the only required file)
Click to expand...
Click to collapse
Thanks for that Sam.
If I do ever get round to cooking a rom for personal use then that will come in handy
i often read about that bend battery pin...but guess what: mine are all intact
as far as i remember, the phones with a bended pin were in the loop all the time...
mine works..sometimes not
i thought it would be good to test that problem again, before claiming t-mobile...i've installed all progs and so on, and the phone works...
sometimes when i hardreset it gets stuck..but then it reboots itself and it works again.
can anyone explain this to me?
such a sporadic problem isn't easy to claim...
DN41
DN41 said:
i often read about that bend battery pin...but guess what: mine are all intact
as far as i remember, the phones with a bended pin were in the loop all the time...
mine works..sometimes not
i thought it would be good to test that problem again, before claiming t-mobile...i've installed all progs and so on, and the phone works...
sometimes when i hardreset it gets stuck..but then it reboots itself and it works again.
can anyone explain this to me?
such a sporadic problem isn't easy to claim...
DN41
Click to expand...
Click to collapse
Hmm; very hard.
On witch stock ROM are you know?
1.78
dn41
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
mrachni said:
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
Click to expand...
Click to collapse
Reinstall previous stock ROM.
But how? Where to find it?
I must do that from SD card if i understand?
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
No, you can flash it over ActiveSync.
About stock ROM; with aria ROM do you have? do you have a branded device?
SPL - 3.03 and ROM 3.14... Affecting installation for W7?
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Innvizible said:
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Click to expand...
Click to collapse
Ass for I know, to be able to install WP7 ROM on your HD2 you will need HSPL. And probably you know it already, but stock ROM 3.14 isn't compatible with HSPL, so yes you need to downgrade your stock ROM before.
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
similar problem on my HD2
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
tazeemn said:
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
Click to expand...
Click to collapse
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Innvizible said:
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
Click to expand...
Click to collapse
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
kurt-willems said:
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Click to expand...
Click to collapse
You are right about that. I stand corrected. This was proven through my tests yesterday. In the past, with my Athena, it worked differently.
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
2.07.50 also worked fine for me for WinMO 6.5 (Energy), Darkstone SuperRam 1.5 and WP7. In fact WP7 NAND & Darkstone from SD ran fine with MAGLDR112.
Updated Radio solved problem
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
Worked like a charm. I put on Leo_RADIO_2.15.50.14** from one of the threads and from then on I then put back SPL-2.08HSPL and then loaded MAGLDR112 and it allowed me to access bootloader and from there I loaded the DWI file for Windows 7. Everything became kinda self-explanatory after following your help... Awesome, Windows 7 rocks... Off to activate the live services...
im having problems switching from an energy rom to the normal stock rom. i am unsure if i have hspl installed, in bootloader it only says spl so i guess it doesnt.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
any help would be greatly appreciated. i am a complete noob with phones and computers.
thanks in advance !!
jackbeveridge said:
im having problems switching from an energy rom to the normal stock rom. i am unsure if i have hspl installed, in bootloader it only says spl so i guess it doesnt.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
any help would be greatly appreciated. i am a complete noob with phones and computers.
thanks in advance !!
Click to expand...
Click to collapse
You have alot of reading to do so start here
http://forum.xda-developers.com/showthread.php?t=611433
jackbeveridge said:
in bootloader it only says spl so i guess it doesnt.
Click to expand...
Click to collapse
look at the numbers to the right of 'spl', , something like x.xx.xxxx
its the last 4 digits that tell you if its spl or hspl. if its .0000 its a stock spl, if its .hspl, , , , ,you guessed it.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
thanks in advance !!
Click to expand...
Click to collapse
sounds like no hspl installed.
samsamuel said:
look at the numbers to the right of 'spl', , something like x.xx.xxxx
its the last 4 digits that tell you if its spl or hspl. if its .0000 its a stock spl, if its .hspl, , , , ,you guessed it.
sounds like no hspl installed.
Click to expand...
Click to collapse
ah right i think i get it... basically hspl 2 enables you install spl or hspl. i think that i may of installed an spl by mistake. so if i install hspl i should be able to go back to an original rom ? thanks
jackbeveridge said:
ah right i think i get it... basically hspl 2 enables you install spl or hspl. i think that i may of installed an spl by mistake. so if i install hspl i should be able to go back to an original rom ? thanks
Click to expand...
Click to collapse
If What you mean with the"original rom" is " stock rom", you don't need any HSPL. Just flash it via active sync or micro sd
like silverwind said, if you are just using any old stock rom, not your correct stock rom for your serial number, then you need hspl, just like cooked roms, if you have the correct one, you dont.
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Radio i am on now is the SPL-3.03.000 XE.
So after i installed it it says "software update failed, please try again."
attempted to try boot and keeps saying the same thing. Went into MAGDLR to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number.
i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Any help on this would be amazing, not sure whether i should try a task28/29 or whether there is a simple fix to this problem.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Drummerman44 said:
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
Click to expand...
Click to collapse
hspl thread, post 1, hspl can only be removed by flashing stock rom from SD card or by using the hspl.exe utility.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
that's the whole rom radio and spl, not just a radio. It will have flashed the radio when you did the USB flash.
Radio i am on now is the SPL-3.03.000 XE.
Click to expand...
Click to collapse
that's not a radio, that's spl 3.03.0000 which goes with 3.14 roms.
So after i installed it it says "software update failed, please try again."
Click to expand...
Click to collapse
the leoimg.nbh you mentioned can't be from the rom you posted. I'm gonna assume (because the outcome would be what you have now) that you flashed a stock 3.14 rom from SD, and step 1 is hspl being replaced by the stock spl for that rom, , in this case 3.03.0000,, then the phone reboots to start the flash, but because hspl has gone only the stock roms that match your phone will work, hence getting flash failed.
attempted to try boot and keeps saying the same thing. Went into MAGDLR
Click to expand...
Click to collapse
can't flash from magldr, I assume you mean bootloader,, coloured stripey screen.
to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number. i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Click to expand...
Click to collapse
because its the wrong rom and there's no hspl to bypass the check.
Any help on this would be amazing, not sure whether i should try a task28/29 or
Click to expand...
Click to collapse
whether there is a simple fix to this problem.
Click to expand...
Click to collapse
yes, get correct stock rom, flash it from SD, done.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Click to expand...
Click to collapse
Correct stock rom. Must match country and provider, example mines from o2 UK, so only o2 UK stock roms can be used.
The rom you posted the name of, see it says "HTC wwe" well the HTC bit means it's unbranded,example bought from carphone warehouse. If your phone came from o2, it would say o2 wwe
Oh and forget about the radio, it comes with the rom.
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
nicknowsky said:
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
Click to expand...
Click to collapse
flash stock rom. magldr gone.
samsamuel said:
flash stock rom. magldr gone.
Click to expand...
Click to collapse
figured that would be the course of action. Any particular stock TMOUS firmware I should flash.
Boy I sold my first HD2 about this time last year, just got a new one yesterday. And I gotta say WOW, this device has just gone crazy DEVn since the last time i owned it. Crazy things.
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
samsamuel said:
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
Click to expand...
Click to collapse
Perfect! thank you buddy.