Related
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
After searching high and low for a simple but eye-appealing stock quote and stock chart utility that I could use with ThrottleLauncher, I finally gave up and put one together myself. I call it ThrottleStocks.
I would like to acknowledge APBilbo for creating ThrottleLauncher. It ROCKS! I would like to also acknowledge the "PocketStock Center" work over on TreoCentral.com which helped give me the idea.
Release History:
V1.3 (28 Jan 09)
- changed chart source to www.marketwatch.com
- added week, month, 3month, 6month, 1year, and 2year stock charts
- added ability to edit stocks you've already entered into the database.
Important: If you are updating from a previous version then you will need to edit each of the stocks in your portfolio and change the chart stock symbol from the old Google one to the new www.marketwatch.com symbol.
V1.2 (26 Jan 09)
- fixed path to Mortscript and stock download scheduling
V1.1
- tried to improve error handling with stock downloading
Pre-Requistes:
1. You need ThrottleLauncher 0.9.6 installed (obviously)
2. The installation instructions below assume you are using APBilbo's TouchFlo3D theme that he distributes with ThrottleLauncher
3. You need Mortscript installed
4. You have the Segui fonts installed in your Windows\Font directory. If you don't you can find the fonts attached here. Unzip and place in windows\font directory.
To install:
1. Extract the attached zip file into your ThrottleLauncher\Setups\TouchFlo3D directory.
2. Start ThrottleConfig and Configure TouchFlo3D. On the new Stocks page choose whether you want the "Advanced" or "Basic" layout.
3. Enable the new "Stock" page in the TouchFlo3D config. Save and reload ThrottleLauncher
4. When ThrottleLauncher restarts you'll see a blank Stock page with buttons along the bottom. The first thing you'll need to do is click on the Settings button (it looks like a gear). This will open up the stocks config menu where you can perform the following;
a) Setup stock quote download schedule. Set the start and end time to download quotes, and the interval in minutes. Note that stocks will only be downloaded on week-days.
b) Enabled/Disable Stock Intra-Day chart downloads. If you are using the "Advanced" layout in ThrottleLauncher you'll need to Enable intra-day chart downloading. If you just want the basic layout you can leave chart downloading disabled and save on data downloading
c) Add stock. Here you'll be asked for the stock name, and the stock symbols. Note that currently it asks for both the stock symbol on Yahoo and on Google. The reason for this is that the quotes are downloaded from Yahoo while the charts are downloaded from Google and the stock symbols are not always the same on both sites. You'll be asked how many stocks you own and how much you paid for them...you can leave this blank as currently this data is not used.
d) Delete stock. Enter the stock symbol and it will delete it from the database.
e) Edit stock. Enter the stock symbol of the stock you want to edit...this will let you then modify its name and stock symbols.
f) Force chart refresh on exit. By default the 1month to 2 year stock charts are only downloaded once per day. If you select this option it will force an update of all the stock charts.
g) Exit. When you exit the setup it will automatically start a download of the stock data.
5. After the stock data has downloaded you will likely need to restart throttlelauncher in order for the stock page to display correctly.
Known Bugs/Issues:
This is a work in progress. The known issues are;
1. When stock charts are downloading there is a progress window that appears. I don't know yet how to get rid of this...but am looking into it.
2. ThrottleLauncher is currently unable to have a dynamic list. Currently the stocks.xml file is hardcoded to have 9 stocks displayed on the page. If you have more or less stocks in your portfolio you may want to edit the stocks.xml file and adjust the file accordingly. Look for the text in="1,2,3,4,5,6,7,8,9" and add or remove numbers accordingly. Note that there are two spots in the xml file where this is used. Hopefully this will get fixed in a future release of ThrottleLauncher
3. The stock tabs along the right side of the screen (in advanced layout) do not update their color correctly. This is a TL bug that is said to be fixed in the next TL release
4. Clicking on the stock chart is suppose to take you to the yahoo web-page for the stock. This doesn't work correctly at the moment.
Nice work, looks great!
my god this is great
there are people in this forum who're like Logitech. everything they do is impeccable.
one request tho.. and i hope it's doable.
is there a chance you could convert it to a regular today plugin so that people who're not using throttle launcher can use it?
This is awesome. great job!
Installed this and this causes my throttlelauncher not not load.
JukEboXAuDiO said:
Installed this and this causes my throttlelauncher not not load.
Click to expand...
Click to collapse
Sorry!
A couple things to check;
1) You are using the TouchFlo3D theme that APBilbo released with TL v0.9.6
2) Prior to enabling TL you ran TL config and configured TouchFlo3D (enable Stock Tab)
3) Try running the StockConfig.mscr mortscript before enabling TL... It can be found in TouchFlo3D\Throttle Stocks\mscr
Ant plans to port this to the VGA Iphone theme?? The homepage has room for two new programs...
Thanks
24 hr Review
Using Hermes 6.0 and TL 9.6 and no problems whatsoever , well done! It runs faster than my shares are falling and looks great (only used advanced version to date). Incidentally I did not install to TouchFlo3d but straight into my own custom theme yet it still worked ok except I lost my own custom footer icons, I can still see the xml so am placing them into black n blue tonite. Thanks again
I've updated the mortscripts to try and make the stock download process more tolerant of errors (particularily timeouts). See 1st post for update.
I still haven't figured out how to stop Mortscript from display the download progress window...
I've updated the theme and scripts to now include week, month, 3month, 6month, 1year, and 2year stock charts. See the first post for the new v1.3
Version 1.3
Working very well, a good improvement, thanks.
thanks to you Great Job man!!!
Your program looks good from description but I couldn't install it correctly since I am using Throttle Launcher 1.0 RC1 (the config.xml doesn't work). Any plans to upgrade to work for TL 1.0? I would love to try and get it working. Or perhaps you could guide me in tweaking so it will work for TL 1.0. I am newbie at this so any help would be greatly appreciated.
johnko said:
Your program looks good from description but I couldn't install it correctly since I am using Throttle Launcher 1.0 RC1 (the config.xml doesn't work). Any plans to upgrade to work for TL 1.0? I would love to try and get it working. Or perhaps you could guide me in tweaking so it will work for TL 1.0. I am newbie at this so any help would be greatly appreciated.
Click to expand...
Click to collapse
If you use the TouchFlo2d theme, the Stock tab is already there. You can download that theme in the ThrottleLauncher website.
stock quotes are real time or 20 min delay?
thanks
pinktaco said:
stock quotes are real time or 20 min delay?
thanks
Click to expand...
Click to collapse
Stock quotes are from finance.yahoo.com
Stock charts are from www.marketwatch.com
These are not real-time sources. I'm not sure what the delay is.
great prog man! any further with hiding the update window? could it be changed to smaller graphic MB introduce a container for the update process? Keep up the good work man!
Update 1: I flashed NRG's latest 6.5 ROM. At first the keypad issues were not visible, but within an hour into use it popped up on me. I flashed back to my custom 6.5 ROM
Update 2: I saw that jmckeejr was nice enough to post the keypad.dll from the new official ROM so I cooked it into my 6.5 ROM. The problem has become worse. Now I have to press twice or even three times for anything to happen at all. I will try flashing back to WM 6.1 to see if the problem is still present.
Update 3: It seems that whenever I turn on my screen back on everything works again for a few seconds (30-40 seconds).
Update 4: I flashed to the official AT&T ROM that was released a few days ago. The problem is still present in 6.1. I'm afraid this may possibly be a hardware issue. I noted earlier that my phone showed three different build dates... does everyone else have three?
_____________________________________
Since build 21232 I've been having issues with my keypad. I cooked a ROM with the latest kitchen (21731/21806) and did not replace the keypad driver (like I've been doing lately) with an older one hoping that maybe the new build would solve the problems, but I continue to have them.
What I've been doing is replacing the new one with an older one from a previous build (21222) but I still seem to be having issues with it. For example, when I have the "Pictures" panel selected and I press the end button it doesn't go to the "Time" panel. It instead goes to the next picture. It does the same thing in all the panels that give you an option to go to a next item. Also when I press the call button to dial a number it does nothing, or it will open the start menu. Does anybody have any idea how to solve this?
Below are two videos showing what happens. Sorry for the crappy quality!
http://www.youtube.com/watch?v=Me80P_e8hHI
http://www.youtube.com/watch?v=Uke0X_Co6A4
***______________________________________***
Here is my process:
1. Open "OEMDriver" folder and replace new keypad.dll with old keypad.dll (old keypad.dll is dated 02/04/09, file version 5.5)
**Note: Before I place the old keypad.dll there is no other visible keypad.dll. After I replace them then it shows up**
2. Open "Da_G's Mods" folder and replace new keypad.dll with old keypad.dll
3. Open ervius kitchen to start cooking and I exclude:
From SYS
BTDUN
BTH_A2DP
BTH_HID
Entertainment
IRDA
LiveSearch
ModemLink
RemoteDesktopMobile
Sample Music
Skymarket
SQM
Transcriber
Voice Command
VoIP
VoIPOS
Welcome Center
Windows Live
Windows Live IM
WMLiveSearchWidget
WMMoney
WMWeather
WMWidgets
From Packages
Adobe PDF
AdvancedPowerManagement
Album
Album Uploader
AudioBooster
BCR
BTBPP
BTFTP
BTSAP
Comm Mgr 2.7
Concurrence Mgr
Connection Setup
CyberonVoiceSpeedDial
EnlargeTitleBar
FMRadio
Full Screen Player
GPSTool
HTC Gesture
HTC Scroll
HTCSDKVTCodec
InCall Recorder
JBed
Labyrinth
LongPressEndKey
MP3Trimmer
PhoneCanvas
PlayShow
PTT
RandomAccess
RSS Hub
spritebackup
Startup animation
TouchFlo
VideoShare
VoiceRecorder
VolumeControl
XT9 Touch pro
YouTube
Zip
From Mods
Audio_Para3_Louder
Audio_Para3_Loudest
PowerButtonRemap
Raphael_6.5_BTHCI
TouchPro
Everything else is included. I then create the ROM and flash on my phone through SD card method. Am I doing something wrong?
Yep, good ole 6.5. Not really using a version of 6.5 that is clean & prestine fro the Raphael.
This is an issue w/ WM6.5.
Strange. I don't have any similar problems. In my ROM's I don't include neither ezinput, nor xt9 (because of problems with keycodes in gba emulators). Could that be the explanation?
GSLEON3 said:
Yep, good ole 6.5. Not really using a version of 6.5 that is clean & prestine fro the Raphael.
This is an issue w/ WM6.5.
Click to expand...
Click to collapse
Why is it that I don't see this issue with other people here who run 6.5? I know of maybe two users with the same problem. It sucks because before 21232 everything was fine. If it wasn't because I was addicted to flashing and having the latest, I would've kept an older build.
rabinhood said:
Strange. I don't have any similar problems. In my ROM's I don't include neither ezinput, nor xt9 (because of problems with keycodes in gba emulators). Could that be the explanation?
Click to expand...
Click to collapse
I actually include both of those packages in my ROMs. I will make a ROM without them and then report back what happens.
What keyboard do you use other than EZInput?
EDIT: I've trying the ROM I just made without EZInput or XT9 and the problems are still there. I did a few soft resets and two hard resets and nothing.
yea strange. Are you using the latest keypad.dll that converts the Home key into a Start Menu key?
Or perhaps you have a bad optical sensor that interprets you pressing "Right" instead of End. I'm sure you know the touchpad's optical sensors work.
Right now I am using the latest Energy Rom. I would try a ROM built by another Chef and see if the problem is with your rom or your phone. The Keypad.dll can be copied into the Windows folder and will become active after a reset. So you should be able to download several different versions and try them without hard resetting or flashing.
Maybe you are reusing the same broken keypad.dll. Da_G posted the latest keypad.dll driver in the WM6.5 kitchen thread. It is the one I am using. It should be included in the last 3-4 kitchens, but I would recommend just manually copying it over to \Windows until you find a good version.
And perhaps the reason it doesn't show up until after you copy the file is because it is a Hidden ROM file vs just a normal file. If you use Resco File explorer, you can go into General options and uncheck "Hide Hidden and ROM files" (I uncheck everything). Then you should be able to see the keypad.dll before you copy it over.
player911 said:
yea strange. Are you using the latest keypad.dll that converts the Home key into a Start Menu key?
Click to expand...
Click to collapse
That was the one that started to give me problems.
Or perhaps you have a bad optical sensor that interprets you pressing "Right" instead of End. I'm sure you know the touchpad's optical sensors work.
Click to expand...
Click to collapse
Yes I am aware. I try to press as far away from the center as possible.
Right now I am using the latest Energy Rom. I would try a ROM built by another Chef and see if the problem is with your rom or your phone. The Keypad.dll can be copied into the Windows folder and will become active after a reset. So you should be able to download several different versions and try them without hard resetting or flashing.
Click to expand...
Click to collapse
I'm downloading two different ROMS right now and will report back.
Maybe you are reusing the same broken keypad.dll. Da_G posted the latest keypad.dll driver in the WM6.5 kitchen thread. It is the one I am using. It should be included in the last 3-4 kitchens, but I would recommend just manually copying it over to \Windows until you find a good version.
Click to expand...
Click to collapse
With the last 3-4 kitchens I've been making ROMS with the new keypad.dll and given them a chance, but the problems are still there. When I replace the new keypad.dll with an old one the problems aren't as frequent, but they do still happen. So I'm pretty sure the problems are with the new keypad.dll.
And perhaps the reason it doesn't show up until after you copy the file is because it is a Hidden ROM file vs just a normal file. If you use Resco File explorer, you can go into General options and uncheck "Hide Hidden and ROM files" (I uncheck everything). Then you should be able to see the keypad.dll before you copy it over.
Click to expand...
Click to collapse
I meant the actual kitchen sub folder on my PC. The keypad.dll in there won't show up, but it's there.
I will try flashing two different ROMS from other people and I will post what happens. Thanks for your advice.
Hmmm...I know quite a few with the issue. It seems intermitent & a few programs affect vKb codes, i.e. opera, which can also cause issues. It's funny though, for some reason if you press & hold the end key for a second, it works.
i just got home and bumped the thread. I'm surprised my post actually went through since I was getting a 500 Server error with XDA.
I'd like to know how things are going and see if this can be hammered out. Again I don't experience any such issues at all. Perhaps it is with a specific build of phones. Maybe they swapped parts midway.
player911 said:
Perhaps it is with a specific build of phones. Maybe they swapped parts midway.
Click to expand...
Click to collapse
I'm not sure if this is how it is with every Fuze, but I have three different build dates (I'm guessing that is what they are).
One is on the top and says: 10/18/08 Rev. G01
The other is on the right side and says: 08/01/08 Rev. B01
And the last one right above the "VOID" sticker says: US 10/07/08 Rev. US01
Could you check your phone to confirm that you also have three different dates?
Top:8/28/08 rev:g01
left:09/02/08 rev:b1
bottom:10/07/08 rev:us01
I'm confused. What do these dates mean? Why are they all different?
perhaps different build dates. They all are the same rev numbers.
Hey all -
If you are looking for build 23025A, please see Post #3.
Here's 23017B. On my initial boot, I have over 29.5 meg free after running Oxios.
WHAT'S NEW IN THIS BUILD:
A new splash screen (thanks to eigerzoom)
Replaced psShutXP with PowerOptions - this has a functioning shutdown feature, and a few other neat tricks
Replaced Oxios Hibernate with the complete Oxios Suite - this also include Oxios Close-Apps, which will free up even more memory (but will close all of your open apps)
DOWNLOAD LINK:
Click here for 23017B (with white taskbar icons)
Click here for 23017B (with a colored taskbar theme)
Here's a list of some of the things I have included:
Memory and battery meter
Updated video drivers
Stock start menu
HTC Task Manager
Advanced Configuration 3.3
Total Commander
nueLED
Oxios Suite (Hibernate and Close-Apps)
PowerOptions
PocketRAR (automatically set as default for .zip and .rar)
AutoRun (UC)
Bluetooth Explorer
Fixed Comm Manager (both in button assignments, and Systems menu)
New splash screens
Built carrier free (see note below)
And a few personal tweaks - skinny scroll bars, ClearType enabled, larger fonts, the old IE set as default, ReplyAll fix and a few other things.
PLEASE NOTE:
This ROM was built carrier free. You MUST install a carrier cab for this to work. Find your carrier cab from here:
Carrier cabs
TO ENABLE MMS:
Here are a few cabs I have found on here and ppcgeeks that should help you enable MMS (multimedia messaging - pictures/video messaging). If any of these do not work, or if you have a better cab or a cab for another carrier, please post your information and I will update the catalog. I cannot vouch whether or not these work and am relying on you to verify. Please make sure you only install the cab designated for your carrier.
MMS cabs
I have also put together a few of my favorite programs that I install afterward to share. Please look through and enjoy!
Ivan's Collection of Handy Programs
Many many thanks to bbsandkm, mattsm, TPlane37, Joojoobee666, the PPCK team, the authors of all of the cabs linked from this post (I take no claim or responsibility for them) and everyone else who helped me along the way.
Click here to chat with us on our IRC Channel if you need immediate assistance.
Any changes either major/minor now that we've moved to the 23xxx build number?
Any fun screenshots or just the same old stuff?
Until I feel these latest builds have become fleshed out enough to become stable, I will keep them here in the third post. Please keep in mind that anything from this post is not entirely functional and meant as a preview only. I recommend having a stable ROM handy to revert back to after you are done testing.
The current build is 23025A. I have 4 different versions available for you. For the most part, the builds include the exact same programs and tweaks as the builds in Post #1. Here are the links and differences:
23025A - white taskbar icons & no HTC Task Manager
23025A - colorful taskbar icons & no HTC Task Manager
23025A - white taskbar icons & yes HTC Task Manager
23025A - colorful taskbar icons & yes HTC Task Manager
Please keep in mind that having the HTC Task Manager in these new builds is a double-edged sword. It works partially, but causes some distortion in the top taskbar; that is why you have the option to use it or not.
btonetbone said:
Hey all - Here's my 23001 build!
Click to expand...
Click to collapse
Good for you Mr boner.
While the chef's keep changing, thankfully they pass along their recipes. So the final meal keeps getting better and better.
Welcome to the cooking club!
Here's my 23003 build! It's includes very similar programs and tweaks from my previous, but I have removed the Adobe PDF Reader. Download, flash and enjoy!
http://www.4shared.com/file/116232830/e9bb90dc/23003-btonetbone.html
PS - I am accepting submissions for additional tweaks and/or splash screens you would like to see in future builds!
i want outlook to have a "Reply" instead of "reply to all" on the bottom left, i had a 6.5 build a few months ago, and it was the "reply to all" which sucks..
thanks
yznhmr said:
i want outlook to have a "Reply" instead of "reply to all" on the bottom left, i had a 6.5 build a few months ago, and it was the "reply to all" which sucks..
thanks
Click to expand...
Click to collapse
I agree it sucks. I'll look into a fix and see what I can do (but I was under the impression it is actually built in to poutlook.exe, so I'm not sure if there is anything that I actually can do).
OK, I fixed the Reply All issue. If you want to replace the left softkey in Outlook from Reply All to simply Reply, it's a simple reg edit that will go into my next ROMs. In the meantime, here's the edit and a cab which will do it for you:
Code:
[HKEY_LOCAL_MACHINE\\Services\OutlookEnhancement]
"Dll"=""
Enjoy!
Good find and good share man! I will be throwing that in as well. Who wants to reply to all lmao. What a dumb feature. I could see if you could select a few messages then click reply all but..
RyanMogul6800 said:
Good find and good share man! I will be throwing that in as well. Who wants to reply to all lmao. What a dumb feature. I could see if you could select a few messages then click reply all but..
Click to expand...
Click to collapse
No problem. I just put this up on my ppcgeeks thread and was going to send you a link. Glad you saw!
Here it is!
23004 - http://www.4shared.com/file/117005703/610b3d4e/23004A-btonetbone.html
I have kept the same programs from 23003, added the ReplyAll fix and added AutoRun (UC).
Enjoy and please post feedback!
Please forgive me if this is a dumb question, I have been searching the forum trying to find out what to do with this .nbh file. But I cant figure it out... I found some things on google but Im not sure and I dont want to brick my phone. please advise.
ouellettesr said:
Please forgive me if this is a dumb question, I have been searching the forum trying to find out what to do with this .nbh file. But I cant figure it out... I found some things on google but Im not sure and I dont want to brick my phone. please advise.
Click to expand...
Click to collapse
No problem. If you have never flashed before, please be sure to read the wiki:
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
It has some fantastic information and will guide you through all the necessary steps to unlock your phone, upgrade the radio (if needed) and load a new ROM.
I have the .nbh named TITAIMG.nbh because that is what's needed for an SD card flash. If you'd prefer to use the ROM Update Utility (available in the link I pasted above), you will need to rename the nbh to RUU_Signed.nbh.
Also, if you are a carrier other than Alltel, you will need to install the proper carrier cab for your provider. You can pick that up from here:
http://dcd1182.n715dp.com/titan/carriers/
Hope that helps!
Ivan
So does this rom that I got at the beginning of this thread have the radio included? If not, which should I get and from where...
I read that thread you sent me to but theres alot of information that just makes me confused.
I have an alltel ppc6800 with WM 6.1 stock. I only want the rom with 6.5 that I found in this thread.
Im not sure what chef is or a kitchen, except for the obvious...
ouellettesr said:
So does this rom that I got at the beginning of this thread have the radio included? If not, which should I get and from where...
I read that thread you sent me to but theres alot of information that just makes me confused.
I have an alltel ppc6800 with WM 6.1 stock. I only want the rom with 6.5 that I found in this thread.
Im not sure what chef is or a kitchen, except for the obvious...
Click to expand...
Click to collapse
First, a "kitchen" is a program used to create ROMs. A "chef" is a person such as myself who uses the kitchen to create ROMs.
Second, custom ROMs do not contain radios. Make sure you have a 3.x radio. Personally, I use the 3.42.50 (the latet radio made available for our phones). You can check your radio version in Start -> Settings -> System -> Device Information. If you need to upgrade your radio, go here and download the latest Alltel ROM (which does contain the radio):
http://www.htc.com/us/SupportDownload.aspx?p_id=63&cat=2&dl_id=114
You will need to re-unlock your phone afterwards.
Third, make sure you understand everything on that wiki I sent. It is extremely important that you understand what you are doing to your phone when you unlock/upgrade. There is the potential for this to either go great and you will be very happy...or for this to not work out well at all and damage your phone if you make mistakes. I'll do what I can to help explain things, but we need to make sure you understand.
Here is another important page to read:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
Also, please note that you will lose all of the data on your phone. Make sure you backup any contacts, calendar items, etc by using available programs. I prefer PimBackup (http://www.dotfred.net/). Also, make sure you have any cabs you may need to re-install your desired programs after upgrading.
I started the Bootloader update utility and now im stuck at the tri-colored screen. it says SPL-2.40.Olipro CPLD-9 the dos window dissapeared at this point...
I read somewhere I need to disable activesyne and run a program ~ http://forum.ppcgeeks.com/showthread.php?t=9229 ~ and that should take care of it but i cant figure out how to disable activesync in vista.
Uh oh....
ouellettesr said:
I started the Bootloader update utility and now im stuck at the tri-colored screen. it says SPL-2.40.Olipro CPLD-9 the dos window dissapeared at this point...
I read somewhere I need to disable activesyne and run a program ~ http://forum.ppcgeeks.com/showthread.php?t=9229 ~ and that should take care of it but i cant figure out how to disable activesync in vista.
Uh oh....
Click to expand...
Click to collapse
That SPL means your phone is unlocked. Congratulations. Now flash the radio (if necessary) or the new ROM. You're on the right track! And don't disable activesync.
Edit - Vista doesn't even have ActiveSync. We Vista users have Windows Mobile Device Center.
I cant get it to go past the tri colored screen though...
I haven't updated my bootloader in almost a year, so I'm a little rusty. But here are a few things to try:
If you are flashing from the USB, take out your SD card. If you are flashing from SD card, take out the USB cord. It's preferable to flash via SD card if you have one that is compatible.
If that doesn't work, what happens when you try to run the exit bootloader program from the thread you linked?
Ok, I figured it out thanks to you. It was just waiting for the new Rom..
Thanks for your help..
Hi guys,
as I've been around for a while, I decided to share a bit of my work with you, too.
So feel free and use this small program if you like. No warranties as usal from my side.
This Bootmanager has a quite intuitive UI. You get an quick overview of the phone status and can select your boot profiles which you can manage inside the UI as you like (see screen shots below).
Additionally you can have voice announcements, SenseUI control, easy backup & restore of startup folder and program settings and an extended information screen. On this info panel you can find all important information about your phone.
This app only requires .NET CF 3.5 to be installed on your device.
The Pattern of the folder structure is always "\_AutoStart_" & selected Foldername. You can change the folder names in the UI settings tab. The folder "_AutoStart_Backup" is created by the program if you back up your current folder. All other "_AutoStart_" & X folders are created initially, but you want to choose which startup links are in there (folder names are case sensitive!). Just ensure the "X" matches your folder name in the ui settings for this specific button exactly. The default buttons are for Sense UI and XDAndroid. Their respective folder names (in the settings tab) are "Sense" and "Android", therefor I have "_AutoStart_Sense" and "_AutoStart_Android" folders on the root of my phone. In the "_AutoStart_Common" folder you have all the shortcuts which have to start no matter which profile is selected.
Tipp:
I have overclocked my device continously (stable) using this method (with this App) and with SmartBoot I can easily select between OC and non-OC configurations.
For your convenience this Windows Mobile® freeware app supports AppToDate, an easy to use application update program. You can obtain it freely from here.
Please download from Post #2.
Thanks to eboelzner for his great Sense SDK!
Download:
Download SmartBoot only here please. (Please no mirrors or similar!)
Please feel free to leave a comment or bugs found.
PS: I will not provide any localization support. Just english language.
If you want I can create a "Light" Version without sounds and stuff, just mention it.
Also if there is demand for it I could create a step-by-step guide.
AndiCP said:
Download:
Download SmartBoot only here please. (Please no mirrors or similar!)
Please feel free to leave a comment or bugs found.
PS: I will not provide any localization support. Just english language.
If you want I can create a "Light" Version without sounds and stuff, just mention it.
Also if there is demand for it I could create a step-by-step guide.
Click to expand...
Click to collapse
Would be nice if we could download it from there. Tried for 30 min but not possible.
claus1953 said:
Would be nice if we could download it from there. Tried for 30 min but not possible.
Click to expand...
Click to collapse
Downloaded just fine for me. I plan to experiment with Android soon, and this will come in handy. Thanks.
J_M_H said:
Downloaded just fine for me. I plan to experiment with Android soon, and this will come in handy. Thanks.
Click to expand...
Click to collapse
Still no luck for me, it says "site not available or too busy etc etc"
wow
AndiCP said:
Hi guys,
as I've been around for a while, I decided to share a bit of my work with you, too.
So feel free and use this small program if you like. No warranties as usal from my side.
This Bootmanager has a quite intuitive UI. You get an quick overview of the phone status and can select your boot profiles which you can manage inside the UI as you like (see screen shots below).
Additionally you can have voice announcements and an extended information screen. On this info panel you can find all important information about your phone.
This app only requires .NET CF 3.5 to be installed on your device.
I wanted to give the community something back, even though it is not much.
But maybe somebody finds it useful, I just thought I could share. Enjoy!
And please don't be too harsh as this is my first publication. There are more to come if it goes smoothly.
Please download from Post #2.
Thanks to eboelzner for his great Sense SDK!
Click to expand...
Click to collapse
big thank
Thanks, good idea & pretty app. I'll try it.
thanks, look like a very powerful and useful program.
downloading is a bit slow, but smooth.
This promises to be a great app.
Would you consider adding a "safe mode" boot option with it? Just wondering.
And thank you very much for sharing.
hello guys. what is XDAndroid? sorry for being a noob
Thank you for your kind feedback
YOSEFE said:
This promises to be a great app.
Would you consider adding a "safe mode" boot option with it? Just wondering.
And thank you very much for sharing.
Click to expand...
Click to collapse
You currently have two options for a safe mode:
1. Tap "Do nothing" at the initial screen (will exit immediatly -> no boot programs)
2. go to settings and enable "Confirmation", then click the button of your desired boot environment (and you can decide on each short cut -> safe mode).
@All: Thanks for your kind feedback! You are welcome!
PS: If you choose option 2 from above and tap no for at least one shortcut, you will get an "Ooops! Something went wrong!" message at the end.
You can ignore this, as it simply means not all shortcuts got executed.
Where is this app made? Itsn't really clear to me
Installed .cab, soft reset, error:
SmartBoot.exe
DirectoryNotFoundException
at System.IO.Directory.InternalGetFileDirectoryNames(String fullPath, Boolean file)
at System.IO.Directory.InternalGetFiles(String path, String searchPattern)
at System.IO.Directory.GetFiles(String path, String searchPattern)
at SmartBoot.Form1.Check()
at SmartBoot.Form1.Form1_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form._SetVisibleNotify(Boolean fVis)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.Application.Run(Form fm)
at SmartBoot.Form1.Main()
on TMOUS HD2 2.08 stock rom
?
twoply said:
Installed .cab, soft reset, error:
SmartBoot.exe
DirectoryNotFoundException
at System.IO.Directory.InternalGetFileDirectoryNames(String fullPath, Boolean file)
at System.IO.Directory.InternalGetFiles(String path, String searchPattern)
at System.IO.Directory.GetFiles(String path, String searchPattern)
at SmartBoot.Form1.Check()
at SmartBoot.Form1.Form1_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form._SetVisibleNotify(Boolean fVis)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.Application.Run(Form fm)
at SmartBoot.Form1.Main()
on TMOUS HD2 2.08 stock rom
?
Click to expand...
Click to collapse
I've got the same problem.
Hi AndiCP,
i think you have forgotten the xml file. I mean: \Application Data\SmartBoot\Configuration.xml
I have made a empty file. Then the message is:
Fehler: There is an error in XML document (0, 0).
Click to expand...
Click to collapse
OK, that's clear.
Next point: you have written that you support only english, no problem.
But Fehler in the popup's is german . Please fix it. And also upload an XML file please.
Also the \_AutoStart_ folders are not created automaticly. Is this the way how should be?
Have we to do this on our own, or is this a litlle bug we have found ?
BTW:
i have allways installed the right .NET version from MS.
EDIT 1:
you say on your private website that the folder names are case sensitive.
Then it must be: _AutoStart_Backup
In your screenshot: _Autostart_Backup
Sorry to say that the app is NOT working on my phone at this moment.
And i'am not alone. There are more people with problems. Please fix it.
At least sense gives problems on restart the phone.
I had to de-install the good idea app. Also some strange problems
on de-installtion. It was not possible. Only with many know how
i was able to de-install it.
mr.First said:
I've got the same problem.
Click to expand...
Click to collapse
Hello twoply and mr.First,
your program error probably comes from a different Startup folder or restricted access to it.
I can't reproduce this error, but I guessed and put an additional entry into the registry ("HKEY_CURRENT_USER\Software\SmartBoot\Autostart_Folder").
If your folder is not "\Windows\AutoStart\" you can enter another path there.
I also added a reg key to customize the initial sound file ("HKEY_CURRENT_USER\Software\SmartBoot\Sound_Load").
Please download the updated version.
Further you don't have to softreset in order to try or set things up, just go to your start menu and use the shortcut.
Finally I hope this helps you, please report your results here.
mike2nl said:
Hi AndiCP,
i think you have forgotten the xml file. I mean: \Application Data\SmartBoot\Configuration.xml
I have made a empty file. Then the message is:
OK, that's clear.
Next point: you have written that you support only english, no problem.
But Fehler in the popup's is german . Please fix it. And also upload an XML file please.
Also the \_AutoStart_ folders are not created automaticly. Is this the way how should be?
Have we to do this on our own, or is this a litlle bug we have found ?
BTW:
i have allways installed the right .NET version from MS.
EDIT 1:
you say on your private website that the folder names are case sensitive.
Then it must be: _AutoStart_Backup
In your screenshot: _Autostart_Backup
Sorry to say that the app is NOT working on my phone at this moment.
And i'am not alone. There are more people with problems. Please fix it.
At least sense gives problems on restart the phone.
I had to de-install the good idea app. Also some strange problems
on de-installtion. It was not possible. Only with many know how
i was able to de-install it.
Click to expand...
Click to collapse
Hello mike2nl,
first of all "Fehler" means "Error".
Second, "Configuration.xml" not found comes from the SmartBoot Directory not being created properly. (Bug: Updated version 1.01 fixes this, then you will also have all the other folders created automatically on first launch).
Third, "AutoStart" is correct whereas in the screen shot you saw before was a left-over of an earlier version, which doesn't matter, because if it wouldn't be found it will be created during backup process anyway.
Last but not least, I can say nothing about "strange problems".
Thanks for your feedback!
Please download the updated version 1.01 or just run AppToDate
Hi AndiCP,
thanks for your fast reaction. I will test it again now. Downloaded and then install it. Will report later here....
EDIT 1:
after installing the app and two times a soft reset the app blocks sense more then once. Strange...
I had to de-install the little app. This was an adventure again. All known ways are not working.
Only massive working in the windows folder and registry cleaning has helped out of that issue.
On which system you have developed thius app? If there something special done for the SonyEricson?
EDIT 2:
after re-install the application i had denite the folder move for the autostart things. Strange, because
then the app will workig. If i have selected Sense UI i get an error message:
Ooops, something went wrong
Click to expand...
Click to collapse
Is this normal? Why you say it is something went wrong? But so far so good. Will test further now.
EDIT 3 (info only):
i have changed the autostart folder in the cab from \Windows\Auto Start to \Windows\Opstarten (dutch version)
EDIT 4 (question):
Have we to copy the apps/shortcuts for the \_AutoStart_xxx\ folders on uor own?
- if the answer yes, no problem (i think thats the way for now)
- if the answer no, then is something wrong
Possible you can think about that issue for a future version of your helpfull app.
Further i think you must add the descirption from your private website here to the first post:
The Pattern is always "\_AutoStart_" & selected Foldername. You can change the folder names in the UI settings tab. The folder "_AutoStart_Backup" is created by the program if you back up your current folder. All other "_AutoStart_" & X folders are created initially, but you want to choose which startup links are in there (folder names are case sensitive!). Just ensure the "X" matches your folder name in the ui settings for this specific button exactly. The default buttons are for Sense UI and XDAndroid. Their respective folder names (in the settings tab) are "Sense" and "Android", therefor I have "_AutoStart_Sense" and "_AutoStart_Android" folders on the root of my phone. In the "_AutoStart_Common" folder you have all the shortcuts which have to start no matter which profile is selected.
Click to expand...
Click to collapse
AndiCP said:
Hello twoply and mr.First,
your program error probably comes from a different Startup folder or restricted access to it.
I can't reproduce this error, but I guessed and put an additional entry into the registry ("HKEY_CURRENT_USER\Software\SmartBoot\Autostart_Folder").
If your folder is not "\Windows\AutoStart\" you can enter another path there.
I also added a reg key to customize the initial sound file ("HKEY_CURRENT_USER\Software\SmartBoot\Sound_Load").
Please download the updated version.
Further you don't have to softreset in order to try or set things up, just go to your start menu and use the shortcut.
Finally I hope this helps you, please report your results here.
Click to expand...
Click to collapse
Thank you for updating application.
Indeed, my Startup folder has another name. I changed the path in the registry, and now everything works.
mike2nl said:
Hi AndiCP,
thanks for your fast reaction. I will test it again now. Downloaded and then install it. Will report later here....
EDIT 1:
after installing the app and two times a soft reset the app blocks sense more then once. Strange...
I had to de-install the little app. This was an adventure again. All known ways are not working.
Only massive working in the windows folder and registry cleaning has helped out of that issue.
On which system you have developed thius app? If there something special done for the SonyEricson?
EDIT 2:
after re-install the application i had denite the folder move for the autostart things. Strange, because
then the app will workig. If i have selected Sense UI i get an error message:
Is this normal? Why you say it is something went wrong? But so far so good. Will test further now.
EDIT 3 (info only):
i have changed the autostart folder in the cab from \Windows\Auto Start to \Windows\Opstarten (dutch version)
EDIT 4 (question):
Have we to copy the apps/shortcuts for the \_AutoStart_xxx\ folders on uor own?
- if the answer yes, no problem (i think thats the way for now)
- if the answer no, then is something wrong
Possible you can think about that issue for a future version of your helpfull app.
Further i think you must add the descirption from your private website here to the first post:
Click to expand...
Click to collapse
to Edit 1: I can't reproduce and never had something like that, sounds like you have problems in your rom anyway as you are the only one reporting this.
Info: Its a simple and standard setup cab (auto generated). Nothing special or changed, it only copies the files. It works the same way on every windows mobile version.
to Edits 2&3: as I said, please check your Autostart folder and change it accordingly.
to Edit 4: Yes. I won't ever include a filemanager!
Hi AndiCP,
i have downloaded the last version yesterday. Installed it and it is running.
At now withour any issue. I think the changings are the solution. But with
un-installation i have my issues. Also when sense is off. But that is not
really a big issue, yet. I will test this again after the next hard reset.
I think this comes with the next CHT test. We, the team, are really haevy busy .
So far, excellent app, that helps me to organize my startup issues on all
CHT (e, s, ...) issues. Thanks for that. That brings us a good effort.
Will report this to co0kie (CHT) and Dark Ninja (GTX).
BTW:
possible you can tell me (PM) where you get or has made the sound files.
I will change something for my needs