Ok i just bought this headset and I must say it is really great and everything works.
it has in ear headphones it is really great the sound is great. all the buttons work so no problem.
what i liked about this headset was when someone calls you you see the caller on the screen so you know who calls you. it has a mic on the cord so you can talk with the headset. u can change songs and adjust the volume. the volume is not the phone volume but the headset volume.
First Connection:
I turned the headset on and it wanted to sync with a phone. On the hero i searched for bluetooth devices and found the headset, i Clicked on it. it connected without any problem.
Issues:
I only have one problem when i listen to music it lags sometimes. i don't know if it comes from the headset or from hero. I thought when the screen goes to standby the bleutooth doesn't work 100% to save battery but i'm not sure. If someone knows what the problem can be please let me know how to fix it. maybe its with most bluetooth headsets, if someone uses bluethoot headset without a music lag please let it know.
Battery Life:
I received my headset today so for now i can't tell much about the battery life. i used it today a little bit. the battery life today was great. i started using my phone at 8 Am the battery was fully charged. i made some calls total 15 minuts. i used 3g to surf the internet for 1 hour, i played some games it also total time of 1 hour, i connected the headset with the phone it was connected for 4 a 5 hours with 45 minuts music listening. the battery showed 15% at 3Am so i used my phone for 19 Hours and then it showd 15% battery life. i think that this is amazing. i will let you know when i tested it with full day connected with the headset but for now you have to do with this.
commodoor said:
Ok i just bought this headset and I must say it is really great and everything works.
First Connection:
I turned the headset on and it wanted to sync with a phone. On the hero i searched for bluetooth devices and found the headset, i Clicked on it. it connected without any problem.
Click to expand...
Click to collapse
I have this same SE headset but it does not pair with my Hero (white unlocked) when I do a scan it wouldn't show up at all on the phone. I've tried the new update from Modaco, no joy.
The phone can see & pair with a regular headset (not stereo) and also with a couple of phones (iphone 3GS/SEw910).
Any ideas?
Thanks
When you wan't to connect the headset make sure that the headset shows the sync icon. it is the icon where the headset is shown and then sync icon and the phone icon. if this shows up you will be able to sync it with the phone. to get it in this state you have to hold the on/off switch till you see the sync icon.
I have the Brown HERO with modaco 2.0 rom. i didn't had any issue's with connecting
commodoor said:
When you wan't to connect the headset make sure that the headset shows the sync icon. it is the icon where the headset is shown and then sync icon and the phone icon. if this shows up you will be able to sync it with the phone. to get it in this state you have to hold the on/off switch till you see the sync icon.
I have the Brown HERO with modaco 2.0 rom. i didn't had any issue's with connecting
Click to expand...
Click to collapse
Yes! that did it, I just didn't had to do that before with my MDA Vario2. Thank you very much. By the way, I don't have any problems with the sound skipping or lagging which was present on the MDA but there was a fix/tweak for that.
One thing, there is no headset icon in the notification bar like when you plug in a wired headset, is this normal?
Yes i don't have the icon either. but the bluetooth shows conncted. if you change the volume on the phone you will see the headset and bluetooth icon.
i foud what was cousig the lag, the background proceses are the reason when you close everythin with taskkiller it will work. the lag comes when its checking mail or when i recieve a sms.
maybe overclocking will fix this issue but i dont want to do that (bad experiance).
commodoor said:
Yes i don't have the icon either. but the bluetooth shows conncted. if you change the volume on the phone you will see the headset and bluetooth icon.
i foud what was cousig the lag, the background proceses are the reason when you close everythin with taskkiller it will work. the lag comes when its checking mail or when i recieve a sms.
maybe overclocking will fix this issue but i dont want to do that (bad experiance).
Click to expand...
Click to collapse
I used to have stutter problems when connected to my car stereo via bluetooth.
It was caused by the wifi being on. Switching it off removed stutter.
My wireless is always off when i leave home, maybe the first day the wireless was one and then where there so many lags. but now when i'm listning there arent so many lags anymore.
Like i sayd it its happends if you run other processes. i hope this will be fixed in android 2.0
do you know how can i open this BT headset to change the battery??
Bluetooth Headset HBH DS970
I have had my bluetooth headset plugged in for hours and the red LED IS ON. It is my understanding that after fully charged the LED will go out. The LED Will not go out when I have it charging. I have attempted to pair the headset but when I hold the power on button the LED never flashes blue.....any ideas?
Hi,
A couple of weeks ago, MW600 was working as expected. But at the moment, I've got connection problems. Is anyone experiencing anything similar, or do you have any tips?
I have tried restarting both the phone and the MW. The radio function works perfectly. I have tried renaming my phone.
Here's what I'm doing:
* Turn on MW
* Turn on bluetooth on phone
* Search for units -> pair the two units using code 0000 (starting from scratch, just in case)
* Phone states that MW is connected to phone and media sound
* If mediascape is playing, I hear ~1 second of media sound
* After 1-3 seconds, MW makes a sound (5 descending tones) -> the phone briefly states that MW is connected to media sound only -> the phone goes back to stating that the two units are paired (no connection)
What do you think?
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
I found the battery life to be a bit short....10 minutes of streaming music and it shut off, all this after overnight charging.....I have repeat this 'issue' Friday night, Saturday and Sunday only to have MW600 dead at the office now
My runs 12-15 hours! Without any Problems.
Same, I can use mine for at least 4 days (about one and a half hours a day) before it needs recharging - are you using the right charger?
sergiu84 said:
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
Click to expand...
Click to collapse
Thanks for this suggestion. A full reset solved the problem.
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Alleniv said:
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Click to expand...
Click to collapse
You press the buttons on the MW600 itself, not on the phone. Read the manual that I linked to, it's all in there.
hmm anyone else have problem with the ringtone playing thru the mw600? when the phone rings. i can hear it ring on the bt headset. but it's like play a bit.. then i hear a beep.. then it plays a bit more.. and beep it's like intermittent
The beep means, that the headset is changing from the mediamode to the telephonemode.
Update... The problem above came back. If seems related to using bluetooth and wifi simultaneously. Whenever I'm using BT and enable wifi, BT gets a lot of problems and usually shuts down. Does this happen to anyone else?
Also, in the past I could use the buttons on the headset to change songs etc. That doesn't work anymore, even after resetting the headset etc. Is anyone else experiencing this?
-------------------------------------
Sent via the XDA Tapatalk App
I have problems with MW600 too.
Sometime stays connected for hours and sometime is disconnecting 3 times in 5 min.
I have wifi on 24h/day so, i didn't test without wifi.
i only get disconectet when i try to make a call ... looks like ist sw issue on the x10 since the mw600 dose not make this on other phone .. but that is an nother problem then you have.. BUT !!! i hade the exact same problem includet to what i have now befor i updatet the x10 to the .16 version
edit: my problem is solved. needet to reset it 2 times befor it workt
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
murmeljenta said:
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
Click to expand...
Click to collapse
I have wifi on 24h/day and most of the time i don't have any problems but sometime they get disconnected and i have to turn off/on BT and everything runs fine after.
I will have to try without wifi
Bluetooth and Wireless LAN (WiFi) both uses the same frequency space (~2.5 GHz)
Most of the times Bluetooth should be smart enough to adjust the frequency to co-exist with WiFi devices.
If your area are crowded with other Bluetooth devices and WiFi access-points, the Bluetooth set might having trouble settle on one quiet frequency, and might just sit there trying to switch frequency all the time, never finding a good frequency to settle on.
To help those poor Bluetooth devices along the way, try to change the WiFi access-points channels to create a free channel where the Bluetooth devices can settle on.
Also check if your WiFi access-points have a "Co-exist with Bluetooth" option, and enable it. It will however reduce the frequency-width and therefore the bandwidth slightly on the WiFi, but Bluetooth devices should work with less interruptions.
Connection problem with s60
Hello!
I have an MW600 as well - using with an s60 symbian nokia (6650 fold).
It works corectly when using in bt mode and listening music from the phone, but it alwways lost connection when turm the handsfree to radio. When listening radio, zthere is no connection, no way to get the calls or answer.
Do somebady have the same problem or somebody know how to solve it?
I did reset on mw600 and paired again, but i have the same problem.
รก
i haven't had any problems with my MW. i always stream music from my pc via wifi to my X10, then to my MW via BT, witch is connected to a Reciver for party.
have you tryed restarting your MW after pairing.
My problem with this headset is that it doesn't:
1) caller name not displayed on incoming calls
2) Music/Mp3 tags not displayed on lcd (using Poweramp)
3) why does the phones itself rings not the headset just some beeps. Embarrassing when phone rings and then answer on headset.
Resetted but not solved any problems.
Wildfire running Wildpuzzle 0.8 with kernel 4.1 overclocked
Ok I m using mw600 stereo bluetooth headset with CM 6.1.3 V4.4 rom for 2 days now. The pairing is easy but the issues that I am facing are;
* phone has crashed/rebooted couple of times while pairing/ unpairing.
* besides first fact, it pairs without any problems and very easily.
* I have used it with mixzing and doubletwist media players. In both cases the music lags and sometimes the lag/pause is about 2-3 seconds long.
* incoming call shows phone number only, no contact name.
* voice dialing works.
* when I m listening to music or not listening to music on incoming call the headset converts to phone mode fine but after the call is finished, the headset doesnt reverts back to media mode that is, the music doesn't plays again and I tried connecting and disconnecting again but only way to make it work again is restart the headset.
* battery is so far ok for the headset. Infact I runned out of my phone battery while I was trapped in underground and listening to music.lol
* even the headset is connected, if I play youtube video, the sound comes from the phone speaker. In order for it to come from headset I have to play some music from using my headset controls and then play the video and then pause the track. This also happens with music app aswell sometimes. Like the headset is connected and if I play the song using my phone, it will play through phone speaker and I have to pause it and play it using my headset controls in order to listen through my headset.
So far its oki but its annoying the laggy music thing. It only occours in music playback, I spoke to my mate on phone for couple of hours using this headset and both ends could listen loud and clear.
i also paired it with my inspiron duo tablet and its working flawlessly....so anyone have any work around of the above mentioned problems? anyone facing the same problems? is it because i am using custom ROM? i am ok with the headset not showing song tags and stuff but music being laggy is not acceptable...because thats what i bought it for!
Any help would be much appreciated?
thanks
Hi, a few days ago I noticed the headset icon in my Xperia X10's task bar, even though no headset or headphones were plugged in. Turn off/on proved to no avail.
Everything else in the phone functions normal, and if I do plug in earphones, they still work.
The problem is really that if I call someone, I must use earphones in order to hear them, because the phone is trying to output the audio through the apparent headset.
If anyone has experienced this before, or knows of any possible solution, any help would be appreciated. Thanks.
When I phone someone, on the dialer, there is a button for speakerphone....make sure that is unchecked and that one the dialer screen is off.
Is Bluetooth on? Add the Power Control Widget on the homescreen....uncheck the bluetooth box
If you open Settings->Applications and take a look at what apps are running.....what is there?
Are there any apps that have anything to do with a music app or something?
thanks for your help beau420, but I now believe it is a hardware problem, after a minute of fiddling with inserting and removing earphones, I managed to make the phone realize nothing was plugged in, and hopefully have now solved the problem
I have a Motorola Roadster bluetooth car speaker.
It works fine for incoming calls and plays music over FM.
Can I setup things so I can make hands free outgoing calls,
just push a button on the Roadster and say call home, etc ?
Seems to work at times but once the Note's screen locks, it stops working...
I've noticed the same problem with my Jawbone ERA. Actually, the ERA keeps disconnecting and later reconnecting itself while in use. It doesn't do that with any of my other devices. :/
But as for your problem...if you charge your phone while it's in the car, and set the Note to open Voice Talk when a Bluetooth device is detected, as soon as you turn on your Bluetooth, VT will stay open and give you instant access to a variety of voice commands. If you enable driving mode, it will read incoming messages to you, and then allow you to reply hands-free. You can also make outgoing calls. If you want, you can also enable a mode so that it will listen for a keyword and you don't have to press a button at all, but that would add to the battery drain a bit.
I know that's not what you wanted necessarily, I'd also like the same thing...mostly so I can keep the phone in my pocket and operate it remotely via headset. But I have yet to get that to work reliably.
EDIT: Okay, I just did some testing and actually fixed my ERA's disconnection issue by doing a factory reset. But the phone WILL NOT take voice commands when the screen is off, or when it is at the lock screen. And for some odd reason, if I have Voice Talk open and I press the button on my headset, it beeps and the phone closes Voice Talk. Every time. If Voice Talk isn't open, when I press the button on my headset it opens Voice Talk and responds to my commands as it should. Very strange.
Thanks for the reply.
Does yours work with a Pin lock?
When I have a pin protected lock screen,
Voice Talk works with the Roadster button but only when the Note is unlocked.
Once the lock screen times on
it does not detect the voice command button press on the Roadster.
If I remove the pin on the lock screen it works all the time but my phone is unprotected.
I'd like the voice button on the Roadster to work even when the pin lock is used and active, does yours?
Oh! I didn't even think of that...I do have the PIN lock activated. You are correct, it works just like it should when there is no PIN code on the device. I suppose it's by design, but it sure would be nice if they had an exception one could enable for voice input. Well at least I know now, haha.
Hello,
I'm new to this site so apologies if I'm in the wrong place or this has been raised before but I've googled with no joy..
I have a Samsung Galaxy S3 i9300 uk unlocked.
For the last month or so m having problems with Bluetooth devices and loudspeaker (seems to be connected)
I can connect to bluetooth devices fine, beats wireless and vw car bluetooth.
It connects automatically and I can talk and hear fine, after a while the sounds drops and it goes echo like, I can't hear the other person at all but on the phone the green button Nader headset is still lit up and the connection is still made. I have to press the headset button to in light it/disconnect it and then re press to connect / light the button back up. I then can hear the person again but it does this continuously throughout the call. Listening to music via Bluetooth is fine and this problem doesnt arise.
When using loudspeaker it's the same, will go to phone (button lit) and I have to press it again twice to disconnect and reconnect.
Can't find out why this happens. I've done a factory reset and it allowed me a few days of it working fine but then goes back to normal.
Anyone else having this problem? I've read a lot about it disconnecting and having to repair but mine seems to stay connected but just drop the sound?
Cheers
Syak2008
same issues
I am having the same issues... did you find the solution?
Same issues too.. i thought it was my ford bluetooth (POS!)