Hi my sisters Nokia X3-00 crashes after I've got to the main menu. I've read on the internet that it maybe is a software error and i should upgrade to a newer software. The problem is that the phone has to be on and in "online mode".
Is there a way to put it in failsafe mode
Related
Hey folks,
I got hold of a new mozart last night and wanted to debrand from the Orange UK rom to a more "generic" rom.
Did a bit of research on how to get into bootloader mode etc. but when starting up the RUU, I get all the way to the bit where the update starts and then I after about 10-15 seconds I get an error message saying that the phone hasnt been detected by the utility.
This was a little strange because the previous screens leading upto the actual update detected the current rom on the phone and prompted me for the newer one........
I read that my phone has to be recognised by either AS or WMDC.....
However, I am currently running W7 X64 and both AS and WMDC dont detect my phone but when loading up Zune, it recognises the phone no problem.......
Any ideas anyone???
Oh the Error codes im getting are ERROR 264 AND 266
Cheers in advance for any help.
hey,
maybe use this tut
http://windowsphonereview.com/htc/debrand-mozart/
Download and install "Windows Mobile Device Center" before installing any RUU rom.
Hi guys!
Like my brother said: if they don't know it at XDA, there is simply not a solution yet. And having tried a lot of options myself, your expertise is wanted!
How it all began:
I wanted to update my Lumia, so used CAB sender. Fine so far, but there was a bug (no keyboard) so I wanted to repair with Zune. Didn't work, it said it was impossible to repair to the previous version (code 80180083). And since it didn't started up now anymore, it bricked.
Looking for a solution, my laptop OS (Windows Vista 32-bit) didn't recognized my phone anymore as Nokia Lumia 800, but simply as 800. And now, it only recognises my phone as Unkown Device (Qualcomm CDMA Technologies MSM). And Windows does not detects a proper driver for this thing. Tried Nokia USB Connectivity, WindowsUSB and the drivers belonging to Nokia Care Suite but nothing gets it done.
View attachment 1231319
I thought I found the solution with NSS, but I dont get the option below which says Nokia Connection Cable, because yet again: no phone can be found!
View attachment 1231326
Or course I tried also with Nokia Care Suite, but yet again: the laptop can't recognise the brick! Although Windows does notices I put something in the USB port and it sees the Qualcomm device.
Hard reset
Not possible, since I will get a 3 second vibration followed by 3 seconds nothing and then half-a-second vibration.
Putting phone on
If I try, it will give the 3 second start-up vibration which connects to Windows Vista (using the typical sound) shortly followed by the half-a-second vibration (and a triple-short disconnect sound on Windows).
As you guys can understand, I am in quite a bad situation now. Since the phone is bought in my home country The Netherlands and I currently live in Melbourne Australia, I hope to prevent sending it back home at any costs.
So what do you think: is this one permanently bricked, or is it still possible with a specific driver to fix this? Seems to me it's purely a communication/connection problem between my laptop and my phone, but I run out of options to try..
You could try downloading Windows Phone Support Tool from Microsoft.
Turn on your phone by pressing on and the Camera button at the same time, it should then enter flash mode (release power on buzz but keep holding the camera button). When it's in flash mode you can try and get Windows Phone Support Tool to repair the phone for you.
Thank you for your reply!
I tried it before, and this is the message I got:
Communicating with device. Please wait for Recover button to be enabled.
Support Tool version 4.8.2345.0
The tool had difficulty communicating with your device. Please check your device connection and make sure you followed the instructions above. Try recovery again and if the problem persists please contact technical support.
No devices were found.
Click to expand...
Click to collapse
The problem seems to be that there is absolutely nothing is installed on my phone. Therefore, the connection with my phone fails over-and-over. Doesn't matters which program I use. I am almost sure that there is a connection fail between the computer and my phone. I tried it at some other laptops but at every laptop it says 'Qualcomm CDMA Technologies MDM'. But not a single program (NSS/NCS/Phoenix/Windows Phone Support Tool) can make an actual connection with the phone, so it must be driver related.
When I try to turn it on, it starts up but then puts itself off, like if its out of energy. It doesn't charges though. What do you think: driver related or battery related?
------------------
Extra added info: when I try to flash Rainbow os-new with NSS, I get this message:
Checking file selection...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
What does that means?
Some more info about using NSS in an attempt to try flashing my phone
(Command: Flashing > WP7 Tools > Write OS)
Checking file selection...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
----------------------------------------------------
(Command: Flashing > WP7 Tools > P**** FS)
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
Preparing update...Done.
------------------------------------------
(Command: Flashing > WP7 Tools > Install)
Init connection...Phone not found!
Does this shows a battery problem? I have had battery problems before with my phone, but I guess that when I try to flash (even with the extra add to NSS) it should ignore any battery level. Or should I screw it open, try it again and see if it will work then?
If it's finding it as an 800 that means it's finding it (it finds mine as an 800 when I've played with it too much).
When you enter flashing mode via camera button, do you not get the image of the phone connected to a PC on the phone?
I had that in the beginning, but those days are long gone.. I don't know how it happened that I don't get that back anymore. Perhaps because my phone doesn't boots itself completely, but falls out of its boot program. Nothing visible on screen
Hey guys,
I just installed Nokia Care Suite (2012.5.3.4) on Windows 8 and it seems to be stuck in offline mode.
Checking for updates from the launcher returns "Firmware repository not available". The Product Support Tool has "Work Offline" checked and greyed out... and the Firmware Download window has greyed out buttons with the message "Network is not available now".
All apps are allowed in the Firewall. I even tried disabling it to no avail.
Any help ?
Has noone any help? Experiencing this either...
MasterOfDesasters said:
Has noone any help? Experiencing this either...
Click to expand...
Click to collapse
SAME Problem everytime...
Offline mode!!
inket said:
Hey guys,
I just installed Nokia Care Suite (2012.5.3.4) on Windows 8 and it seems to be stuck in offline mode.
Checking for updates from the launcher returns "Firmware repository not available". The Product Support Tool has "Work Offline" checked and greyed out... and the Firmware Download window has greyed out buttons with the message "Network is not available now".
All apps are allowed in the Firewall. I even tried disabling it to no avail.
Any help ?
Click to expand...
Click to collapse
Are you using Nokia Care Suite on a wireless connection? if so you need to plug an ethernet cable into your pc/laptop
My laptop is on a wired connection.
I am also having this problem with care suit on a wired connection. Connecting to my Lumi 900 is no problem, but I cant seem to get the PST online.
Edit: fixed, downloaded the old version from here.
forums.wpcentral.com/nokia-lumia-920/203979-fix-bricked-920s-after-reset-flash-process-defined-inside(dot)html (replace dot with ".")
Wired here, installed Nokia_Care_Suite_5.0_2012.45.4.5.msi and always online - though I expect it to change at the end of the month when the "public" access to the servers is said to be closed and you'll need a specific kind of account to use it.. IDK.. lets see.
Hi there,
I reached to the point i'm writing message in this forum cause I honestly tried everything.
Iv'e got a Lenovo s960 which I bought on eBay, recently he decided to make a software update to Android 4.4.2.
So what is the problem?
Iv'e got the phone with custom rom for int'l use (English and with google services), the phone updated to a chinese version without google services, and a bit of english.
Iv'e reached this conclusion based on the internet.
So why can I just root the phone and install another rom?
This is a really strange problem,
I found few information online about this but mostly in ended up without solution, so folks we got a challenge.
When i'm connecting the phone on USB, it's charging but not recognized, the computer "sees nothing", the phone just charging, like it was connected to AC adapter .
Iv'e tried a few computers, a few cables, and tried on Mac OS X and Windows. I noticed that there is a known problem between Win 8.1 and media tek chips, but ever after manual install no change.
The problem is in the phone, the usb option just disappeared, the is no "usb setting" anywhere,
I also tried to enable USB debugging but yet no solution.
Shortly I need to install other rom and to do this I need something to recognize my phone.
And now I have to be honest, I'm taking care of this case for a very close friend, it's huge favor for her, if it was mine I was just buying a new one.
Any help will be blessed,
Thank you
Yarin
Jumping I'm really out of clues
So i got my friends old Lumia 920 with Windows 8/8.1 installed on it but obviously it's not really used anymore and a lot of apps are already unsupported now. So i thought i'd try and install Android over the Windows OS.
Using WPInternals i flashed the phone with a .ffu file (RM-820 - i think!) that was listed under my phones specifications, used the program to flash the phone but just before it completes i get an error message saying the boot-loader wasn't unlocked properly and now the phone won't switch on, hold a charge or do anything at all. I have tried all button combinations for a soft & hard reset but the phone doesn't respond at all. I managed to get the phone connected to my desktop temporarily in Mass-Storage mode, but then the connection disappears and i can't access it.
I've seen so many posts about this problem and being able to 'flash' it back to normal or repair the issue..
can anybody recommend or explain a technique that would work?
Many thanks!
Hi,
is there any sign of reaction in the device manager, e.g. a Qualcomm_USB device or a Qualcom_COMx port?
Joachim