Related
I have a vibrant and I was rooted my cell phone when the phone's version was 2.1 eclair
I tried to upgrade to 2.2 froyo by official updating
After updating my phone did not show any screen so i tried to return original rom by odin.........
However, odin did not work for the phone... Always stopped when odin tried to install modem.bin.............
And now my phone does not work and even I cannot turn downloading mode or recovery mode........ It is just not work like when the phone's battery is done....
Plz if someone know how to fix it, explain me...........
Not sure what's going on here, but a few more pieces of information might help others figure it out:
First, what ROM were you running? Given the fact that you officially updated, I'm guessing rooted stock? Not sure if this is relevant to your problem, but were you running a lagfix of any kind?
Second, how did you enter Download Mode? Did you select it from a Shutdown menu? Or did you use the Volume buttons while plugging in the phone? EDIT: Forgive my stupidity. You obviously used the buttons, as you entered Download Mode after bricking.
Third, what version of Odin are you using? Did or didn't you select repartition?
Finally, which stock file did you use when restoring?
Take out battery , plug usb into comp. Then while holdin vol up and down plug in usb.
Sent from my SGH-T959 using XDA App
hi
I rooted the phone before I tried to upgrade official update.
And I did not use any custom rom, I just used legfix
And I tried to use T959UVJFD this rom to restore my phone....
and I used odin v1.7
i tried to click or non click repartition both but when I did first trying
I did not check repatition and I used volume down button to join dowloarding mode.
try to Odin with Eugene's froyo that doesn't brick THEN Odin back to stock. Link should be in the Bible thread at the top.
This method has helped me in a brick before.
lol i swear im explainin this second time this issue already today , go hook up your phone to wall cahrger for 5 min , unplug cabole from chsrger and unplug phone from cable hook up cable to computer remove battery from your phone hold vol up vol down hook up usb cable that is already hooked up to computer connect it to phone while still holding vol up vol down bam u got it there if it didnt work hook up phone to wall charger to 10 min instead of 5 trust me i went thru same storry .
i went with every imaginable story of brickin my vibrant lol
i thinkk chance of you brickin that phone to the point that wont ever turn back on is like one in 1000 if not more unles u fried the phone and i dont know id thats possible P
First, make sure you have at least Odin3 v1.3 when attempting this. This version includes a Samsung specific .dll that is required to get a successful load with Odin. Then follow these instructions to flash back to stock.
http://martint.net/2010/how-to-use-odin-to-go-back-to-stock-jfd-2/
from there, just root, install Clockwork Mod Recovery, flash and enjoy.
I used 5 different roms to restore my phone..... but it still stop when odin try to install modem.bin............ I do not understand and very bad.... how can i fix it...
and I tried to find eugene's froyo rom... but I cannot find download link........
plz help me.... I will appreciate every guys......
ss10823 said:
I used 5 different roms to restore my phone..... but it still stop when odin try to install modem.bin............ I do not understand and very bad.... how can i fix it...
and I tried to find eugene's froyo rom... but I cannot find download link........
plz help me.... I will appreciate every guys......
Click to expand...
Click to collapse
Then its odin. Try to find an older version. Yep I said that. I run 1.3 still because it works every single time.
Sent from my SGH-T959 using XDA App
I'm just grasping at straws here, but you might try using every version of Odin (as has already been suggested by several posters above). Also, make sure you remove your SIM and sd card. Lastly, run Odin as an administrator. I don't think the admin part is related, but it can't hurt to try.
Look for Eugene's froyo on Android Spin. I DLed it a few days ago.
Sent from my SGH-T959 using XDA App
Okay guys, never let me down before, lets see if you can keep a perfect score
This is not my first time rooting, i've rooted at least 3 phones thus far, and I am trying to root my Samsung Fascinate. I've tried z4root, Superoneclick and adb. None of them took. I believe it may be something with my drivers, but before I get into specifics, let me give you my information:
~~~~PHONE~~~~
Hardware version: I500.04
Model SCH-I500
Firmware: 2.2.2
Kernel version: 2.6.32.9
Build Number: SCH-I500.ED05
~~~~COMPUTER~~~~
Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3.
Ok so now that's out there, what am I doing wrong? when I tried z4root 1.3.0, it got the point where it said "acquiring root shell, then the phone vibrated 3 times and the app closed. Super one click, the prompt got stuck on "waiting for phone" ADB, the device won't even show up in the list of devices. I can't seem to find the right drivers anywhere.
It may be important to note that I am using my data cable from my optimus v, and when I plug it in, the micro-usb dongle doesn't go all the way into the port on the fascinate. However, the fascinate gives me the notification that usb mode can be activate and that debugging is on, etc.
I made sure that mock locations, and usb debugging were both on.
Any help?
Follow these steps in link:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Ive always used ADB and pushed over the files and such.
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
I have to have root for that right? My drivers aren't working, is there a way to flash it with out a computer
OhioYJ said:
Ive always used ADB and pushed over the files and such.
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
Click to expand...
Click to collapse
Sent from my LG Optimus V running Sense 3.0
You need a REAL cable... If computer doesn't see the phone via the drivers, nothing is going to work.
OhioYJ said:
However are you going to flash another rom? If so just Odin recovery, flash the rom and be done with it.
Click to expand...
Click to collapse
agreed! If you want a different rom, alot of the steps in that link I posted a not needed. Just odin the proper recovery for the rom you intend on flashing. boot into recovery and wipe data,cache,dalvik, then install rom.zip from sd card. reboot and the phone should be rooted.
droidstyle said:
Follow these steps in link:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Click to expand...
Click to collapse
Downloaded everything in the link, installed drivers, I'm on my friends laptop now, still xp. I got to the step where I have to find CWM3 Voodoo in Odin, and the instructions say that one of the boxes should have turned yellow, but it didn't. I went on ahead and clicked the pda button, but it just said success 0/failure 0. What do I do? Do I have to have vista?
That means odin is not recognizing the phone. Im not sure if odin works with xp or vista... I only use 7 these days. Actually if my memory serves right, odin dont work with xp, don't quote me tho. You could try heimdall but I have no experience with it.
Still can't squire root.I've factory rest 3 times now and still nothing. Can no one help?
Sent from my LG Optimus V running Sense 3.0
If u can't get odin or heimdall to work, you won't be able to root. Do you not have windows 7
droidstyle said:
If u can't get odin or heimdall to work, you won't be able to root. Do you not have windows 7
Click to expand...
Click to collapse
as stated in the op, I explicitly said I am using windows xp, media center 2002, service pack 3 to be specific. So your telling me I'm S.O.L.?
first, get a real cable
then, go to official samsung website and install the correct fascinate drivers
download and open odin v3 1.30 (I have xp and it works)
plug in phone in download mode, wait for odin box to turn yellow
pick file in pda
and press start
then just go into cwm via 3 fingers and flash rom
dragon1357 said:
first, get a real cable
then, go to official samsung website and install the correct fascinate drivers
download and open odin v3 1.30 (I have xp and it works)
plug in phone in download mode, wait for odin box to turn yellow
pick file in pda
and press start
then just go into cwm via 3 fingers and flash rom
Click to expand...
Click to collapse
I have my cable from my samsung intercept, would that work? By the way thanks for being so informative. Could you pm the drivers you used, if you have them?
Sent from my LG Optimus V running Sense 3.0
I'm not saying that you shouldn't be doing this but I think you need to slow down and read some more before trying. While this phone is pretty dang hard to brick without physical damage, lacking basic knowledge can put you down got a while if something goes wrong.
A good place to start is the qa stickies. Again I'm not saying don't, just maybe give it another day or two. Really sucks rushing in soft bricking and having to learn after with no phone in the mean time.
XDA Prem app Running UKB w PBJ
MattRussNC said:
I'm not saying that you shouldn't be doing this but I think you need to slow down and read some more before trying. While this phone is pretty dang hard to brick without physical damage, lacking basic knowledge can put you down got a while if something goes wrong.
A good place to start is the qa stickies. Again I'm not saying don't, just maybe give it another day or two. Really sucks rushing in soft bricking and having to learn after with no phone in the mean time.
XDA Prem app Running UKB w PBJ
Click to expand...
Click to collapse
Not trying too be an ass or anything but 1.) This is my 5th or 6th time rooting. I have more than basic knowledge. 2.) This is a spare phone I picked up dirt cheap for development. 3.) I checked every place possible trying to find out why my drivers weren't working including q&a.
That aside, I'm trying it on my friends laptop with vista. Wish me luck.
Sent from my SCH-I500 using XDA App
hi there, i've searched and searched and cannot for the life of me find any stock roms or anything for the telus fascinate it probably doesn't help that I don't know what the build number is... I flashed a verizon vibrant rom quite a while ago and don't remember my methods of doing so, I've read that it's going to be a huge PITA to get it back to stock, especially because I can't seem to get it into ^&%^*% recovery mode or even get it to connect to my pc.. so any help in that regard will also be MUCH appreciated
THANK YOU in advance.. I hope!
Alright so i managed to find an all in one zip file in a tutorial post obvs i didn't look hard enough lol!
So that just leaves me with the more important predicament. I can't get my phone into recovery mode to flash with odin and my pc won't connect to the pc at all.. I read somewhere that my phone is soft-bricked???? Because of using a vibrant Rom? Any input is greatly appreciated once again
P.s can a mod change the title? Or can i? Because its slightly irrelevant to the post now
Sent from my GT-I9000 using XDA App
Can you link the All in One ODIN you are talking about?
I sure can here it is
http://forum.xda-developers.com/showthread.php?t=923712
coincidentally this is also the exact procedure i followed when I rooted and flashed.
so a little more information for you.
sorry about the reply taking forever i couldn't find the post on my phone and haven't had much time to sit on the computer
AntoineDon said:
So that just leaves me with the more important predicament. I can't get my phone into recovery mode to flash with odin and my pc won't connect to the pc at all.. I read somewhere that my phone is soft-bricked???? Because of using a vibrant Rom? Any input is greatly appreciated once again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Says your phone model is GT i9000 so you probably flashed a gti9000 rom (Bell Vibrant / international Galaxy S).
Anyway... you need to be in "download mode" to flash via odin. I think you meant phone to pc, but were you able to connect your phone to the pc before? Do you have the correct drivers installed?
You know you're in soft-bricked if when you turn on the phone, you get a picture of a phone to pc with a ! in between. This can be fixed by a USB jig, or for some, just doing the download mode button combination while your battery is out and your usb is plugged into the computer.
What rom did you install exactly?
Yes i realise that i suppose that's what i meant but odin doesn't pick up my phone and my pc won't either. I used to be able to connect yes but now it won't I have the drivers downloaded i havent had the chance to try a different cord but this is the same cord i used to flash, so im pretty sure that's not the problem.
I guess its not soft bricked then i haven't seen anything like what you have described,
The Rom im using is called EXTRAordinary Rom or something like that ill try and find a link for you
Sent from my GT-I9000 using XDA App
Bump? This is a serious issue for me as my Bluetooth is not working and things are constantly force-closing...
Sent from my GT-I9000 using XDA App
If you have gotten your phone into download mode and your pc isn't recognizing it, you should; 1 - try a different pc, 2 - try a different cable or 3 - try both. Are you still able to get it into download mode?
Ughh I've tried every computer in my house, 3 laptops and one desktop...
My personal laptop is the only one it worked on previously, it now doesn't work, and I only have the original cable i did the flashing with originally, but i'll yoink a cable from work tomorrow do test that out, although I am seriously doubting it would work... my widgets have recently stopped working as well, they say "problem loading widget" I'm pretty scared by this point and feel as though my phone is sloooowly hardening into a useless brick. i'll update tomorrow, when I get a new cable.
um also, I've posted this question in a different thread but have yet to be answered, why can't I find the telus usb drivers anywhere? they don't have it on samsung's website,,, i haven't installed any drivers since the original flashing and have no clue as to where to find them... as far as I could remember it was ridiculously easy to find them last time....
Thanks in advance,
Antoine
try installing samsung kies-worked for me once
hi i recently tried to put android 2.3.2 rom on my phone.everything went smooth but when the phone came back on it didnt have a signal.it wont find my network.so im trying to put it back to a froyo rom through odin but it keeps getting stuck on setup connection.ive tried to find out through forums whats going on,also my download mode has a differnt screen.it says,FORCED UPLOAD by KEY PRESSING..anyone can u please help
What 2.3.2 rom did you try to put on your phone? Most of the gingerbread roms out now are at least 2.3.4. And what methods did you use to try to get to download mode?
Sent from my ZenDroid using XDA Premium App
iu cant find it but my download screen changed...also when my phone starts up its says galaxy s i9000 now instead of vibrant..to get to download mode i used the volume up n down keys and power button
heres what my phone info says...
Model number: gt-i9000
Firmware: 2.3.2
Baseband: i9000xxjve
Kernal: 2.6.35.7-i9000xwjv1-cl31216
[email protected] #2
Build: gingerbread.xwjv1
I hope you had backed up your /efs folder with the nv_Data.bin and imei information in it.
I have no clue why IN BOLD in the Vibrant guide/bible it doesn't say the first thing everyone should do is backup their /efs. No mention of it, boggles my mind.
Ever do a nandroid backup?
no i didnt back anything up..is there any way to get that back and or those files...the odin program sees the phone but its on com7..and it always hangs at setup connection...
Can you get the USBID on forced upload by key pressing? Use linux, open a terminal and type 'lsusb'.. then just copy-pasta the results in here via the included firefox. It would help me greatly. It would also help us to understand your problem
Grab Ubuntu Linux here: http://ubuntu.com/download
jsen450r said:
iu cant find it but my download screen changed...also when my phone starts up its says galaxy s i9000 now instead of vibrant..to get to download mode i used the volume up n down keys and power button
Click to expand...
Click to collapse
You definitely flashed a i9000 PBL, SBL and Params. It will work, but this is your problem.
i get a windows error of no disk when trying to run the ubuntu installer for windows..any advice
jsen450r said:
i get a windows error of no disk when trying to run the ubuntu installer for windows..any advice
Click to expand...
Click to collapse
Use the USB install method instead of running in windows. Personally, I keep Ubuntu on a USB drive at all times because its capable of recovering windows. You can always boot any modern computer from a Ubuntu 32bit USB.
FIX
hey man I just did the same **** with my sisters phone and thought I was stuck too. here's what you do. ONLY hold down volume UP when you connect to odin. IT WILL go straight to DOWNLOAD MODE and not FORCE UPLOAD then you should be able to load the files you need.
Hi, I'm pretty new to Android and stuff, but I bricked my SGP 5.0 with a mod.. At first I was able to go into download mode but then I think I flashed the wrong firmware and now the device is completely unresponsive. Any advice on what to do would be great. I also already checked out all the forums on here but none have been able to work for me. Thanks in advance!
Yup. I was in the same boat as you. Exact same one actually. However i managed to get best buy to to switch mine out because i said it was "defective". I tried the linux tutorial with resurrector and nothing as well. And i also tried.... Well everything. From my thread i posted I gathered that no one (at leasr on xda) knows how to unbrick these damn things. So until these get more popular. Your sunk. Sorry pal:/
try the resurrector.. it's worked for me on a few occasions. it brought mine back from not even being able to turn on.
one thing that's not incredibly obvious with it though is you have to hold "vol up" for download mode while the program is doing its thing. if you don't hold the button it wont work.
Tried it.
I tried that already though and it wouldn't let me unbrick it, but I'll give it another try with what you said about the Vol.+Up keys! Thanks!
I don't have a 4.0 player but my 5.0 player was bricked initially the first time I tried to root... To get it into Download mode you need to hold Vol-(Vol down) button and Power button as the unit is powering up. Hold both for a few seconds until you see the yellow download mode picture.
Good luck
Are you able to get to the download mode? If so I have a simple solution. If not, start a download of Ubuntu to have the proper stuff to fix your problem.
I'm running Ubuntu with the Unbrickable Mod and I have it in download mode and I have virtualmachine installed with windows and sammy drivers but my player wont show up in odin3. Any ideas to get it shwoing?
Either, shutdown VM and see if usb device shows up in windows. If it still does not then unplug usb from pc and then plug it back in, or transfer usb back to host in VM.
I tried that already.. It still doesn't show up in Odin3.
Check device manager for vm drivers for usb and remove them?
Sent from my YP-G70 using XDA App
Hmmm.... I don't really understand what you mean.. Sorry!
When you attach a usb device to a VM the vm software replaces the drivers of the USB device on the host with virtual drivers that redirects IO from the USB device to guest If the original driver does not get put back in during a detach then IO never goes back to the host.
I know that sounds complicated but I do not know how else to explain it...
Sent from my YP-G70 using XDA App
Okay, i fixed that. I have it in download mode, i uploaded the bootloaders that adamoutler has. I uploaded the stock rom you have. Odin3 said pass. But its still in download mode, autoreboot was checked. when i try turning it on, the download screen appears but the icon for download goes all over the screen then stops. Its still recognizeable in odin3 too. Any ways to get this thing going?
My stock rom does not include bootloaders and adam outler's bootloaders are only a temporary solution. What you need to do is flash a full international rom that has bootloaders. Then flash my stock rom to fix the capacitive buttons.
Sent from my YP-G70 using XDA App
Alright I see what you mean!! Where can I get a full stock rom though?
Well, I'm not exactly sure. I used to get mine from samfirmware.com but they have recently changed their site. You might try rumirands stock recovery in the dev section. You'll want to open it up and look for files like: boot.bin and Sbl.bin . These are the bootloader files. This will verify that you have a rom with bootloaders in it.
Sent from my YP-G70 using XDA App
Alright thanks a lot! Ill try rumirands stock and if that doesnt work ill go to samfirmware.com. Ill be back with the results in a few hours!!
Well Rumirands ROM did not. work. samfirmware.com only has the French and Chinese Rom versions so that doesnt help either. I downloaded a .tar.md5 from here : http://www.4shared.com/file/zhZjh0EY/package_us235tar.html..... Should I flash this by itself or do I need a pit file too?
The language of the ROM does not matter. What matters is that is has the boot loaders. Flashing my Stock ROM over it will fix language and capacitive buttons.
Make sure you have followed AdamOutler's intructions precisely. I don't recall having to use a pit file other than the one in his intructions but if comes to it, it is another troubleshooting point.
Realyy? Hm alright so what your saying is that when I have it in download mode, and with, lets the the chinese firmware, I flash that, turn on my sgp to see if it loads and then put it in download mode again and flash your stock rom, that it might work fine again???