plz plz plz....
help me some one
actually my streak just slipped off from my hands at that time it was switched off.
when i tried to switch it on again the dell logo come, after that the o2 wall paper appears thats it.
it's stuck over their, after every 10,15 seconds the screen gets blank for a second and the o2 wall paper appears again
thanks
plz help ASAP
chiragbaid said:
plz plz plz....
help me some one
actually my streak just slipped off from my hands at that time it was switched off.
when i tried to switch it on again the dell logo come, after that the o2 wall paper appears thats it.
it's stuck over their, after every 10,15 seconds the screen gets blank for a second and the o2 wall paper appears again
thanks
plz help ASAP
Click to expand...
Click to collapse
DJ_steve plz help
I can understand your frustration about your device but please do not post 2 questions in the same forum about the same subject Thank You
Related
:?: i finally wanted to use my siemens sx56 after a year... Now it doesn't want to start all the way up... Lots of problems.. Battery light will not come on... No start bar on screen... Resets itself all the time... blinking backlight about every 15 seconds... etc... Please help me... I just want to use it again... it has wallaby bootloader 5.15... ppc 2002 3.14..
Have you tried a hard reset, that is using the unscrewed top half of the stlylus in the hole on bottom right of xda, leave for one minute then press again.
I recently picked up an SX-56 that was long unused. It took a few minutes on the power before the lights would come on. Plug it in and let it juice for a minute, and then a cold boot is definately in order. Also, make sure that the SIM door is fully closed.
thanks for reply guys... But i tried all of that stuff... sometimes it will bring up windows but there is no start button... also i can't even use a stylus because it's not tuned up.... also it won't let me connect to activesync... comp see's it but cannot connect...
i think u need a new one
Can you get to the bootloader?
I have O2 XDA NEO first this have hang problem after boot....i tried to upgrade but problem is still then i heat Mchip after that phone becomes white screen and vibrate when i insert batt......is this due to shorting or what n phone does not connected to pc plz help what should i do........
PLZ HELP i am in Truble.........
Help??????? Fully charged battery put in vibrant and nothing???? The 3 combo or 2 button combo doesn,t work... Plug vibrant into usb and the phone turns on with swirly thing and then gray battery and then green battery and that,s it... I haven,t seen anyone address this issue so i would appreciate some help.... I,ve tried everything that most of u guy,s posted but, not one thing worked... When i unplug the vibrant from usb and the phone shuts off... What the hell is going on??? Please help....
kedashy said:
Help??????? Fully charged battery put in vibrant and nothing???? The 3 combo or 2 button combo doesn,t work... Plug vibrant into usb and the phone turns on with swirly thing and then gray battery and then green battery and that,s it... I haven,t seen anyone address this issue so i would appreciate some help.... I,ve tried everything that most of u guy,s posted but, not one thing worked... When i unplug the vibrant from usb and the phone shuts off... What the hell is going on??? Please help....
Click to expand...
Click to collapse
not sure if you tried this method start watching at the 4 min mark.
http://www.youtube.com/watch?v=KyAIUOYufrU
I appreciate u replying but, every single time i hold down both buttons up and down and insert the battery i get the same dam thing... There,s got to be a fix for this somewhere...
kedashy said:
I appreciate u replying but, every single time i hold down both buttons up and down and insert the battery i get the same dam thing... There,s got to be a fix for this somewhere...
Click to expand...
Click to collapse
have you tried using the toolbox? not sure if it will help
http://forum.xda-developers.com/showthread.php?t=954509
I,ll try it out and thanks nomad... Let me ask u when i install aio toolbox 2.5 after opening and installing 32 bit, do i open odin up or will it open it by itself??? Also after doing that should i click on 3 button to get phone in recovery ??? U see i can,t turn phone on to go into setting to enable debugging... So will this program do that for me???
how can i enable debugging on phone if it won,t turn on... i can,t get to applications... can,t get to settings... which way to go????
i know if remove battery and contact streak to loptop the screen will turn on,
bout its not turn on,
i try many things to turn streak to on like removeing battry and bout streak on charge and bouting battry back bout its not work,
i know how to ues streakflash and qdtooll bout its not work, i change battry to bout nothing change
the problom my streak does not want to turn on.
so i cant contact to loptop,
what i have to do ,it looks like my streak is death,
help
kkof94 said:
i know if remove battery and contact streak to loptop the screen will turn on,
bout its not turn on,
i try many things to turn streak to on like removeing battry and bout streak on charge and bouting battry back bout its not work,
i know how to ues streakflash and qdtooll bout its not work, i change battry to bout nothing change
the problom my streak does not want to turn on.
so i cant contact to loptop,
what i have to do ,it looks like my streak is death,
help
Click to expand...
Click to collapse
hi..i had something like this prob. my battery was very hot and streak froze. after i pull out the battery, but didnt get power. after 2 days continuously trying, accidently i press camera button and guess wht streak get power. since thn i need to use camera button to power and connected to charger. power button works perfect whn streak is on. but it just can not turn on streak.
so basically wht i do is, connect the charger and continuously press camera button. if it goes fastboot thn pull out battery and disconnect charger and start again from beginning. hope it will help u.
thank you sajibcy .
i try camera button bout streak still dont want to turn on.
so i thank i have to wait 2 day,
did you live it 2 day with battrey or with out battrey?
kkof94 said:
thank you sajibcy .
i try camera button bout streak still dont want to turn on.
so i thank i have to wait 2 day,
did you live it 2 day with battrey or with out battrey?
Click to expand...
Click to collapse
i mean i try 2 days. connect to charger or pc and keep pressing. mb it will start. btw is ur battery totally flat? if yea thn u can try this to start charge again.
http://android.modaco.com/topic/327695-help-streak-wont-start/
thank you
bout the battrey are good i try it in my friend streak and it work,
my fault was i flash amss.mbn and dsp1.mbn
bout i was so Stupid
i flash amss.mbn and osbl.mbn not dsp1.mbn by mistake
and reboot ,thin streak dont want to work again,
i Search in google and i did not see any one have this problem ,,
i need help
kkof94 said:
thank you
bout the battrey are good i try it in my friend streak and it work,
my fault was i flash amss.mbn and dsp1.mbn
bout i was so Stupid
i flash amss.mbn and osbl.mbn not dsp1.mbn by mistake
and reboot ,thin streak dont want to work again,
i Search in google and i did not see any one have this problem ,,
i need help
Click to expand...
Click to collapse
This happened to me twice (yep two dead dell streak) when playing with fastboot, it totally killed my Dell Streak but I manage to return the unit to the shop twice and they happily replaced it for me as they too can't get it to turn on. I just played innocent and said that I don't know what happen when they were asking me all sort of questions.
Good luck dealing with your streak and hope you can return that unit and have it replace just like mine.
thank you
bout is there is anthink with external sd card
It is very easy to cut a notch that gives you access to the inner Sd Card with an exacto knife of other sharp tool. Picture
http://android.modaco.com/index.php...attach&attach_rel_module=post&attach_id=60894
any help friends
help friends
friends i need help
????????????????????????!!!!!!!!!!!!!!!!!!!!
kkof94 said:
????????????????????????!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
why u dont use qdl tools? i guess that is ur last try. if no thn straight to dell and play dumb tht u dont und nothing and mobile dont work.
Hello Guys ,
I m a newbie here... and this is my very much first thread.
Recently my S ll having a big trouble
whenever i switch of the phone its doesnt on for a while... like 20 mins or 30 mins... i detached my battery and plug it after half an hour and press the power button..then it boot..
anyway... pls forgive me for my poor english
sometimes it takes more than 1 hour to make it power on.
But now it doesnt come back ... its been 7/8 hours... i tried with another battery. but it still on power off.
one think i should mention. whenever i flashed the ics 4.0.4 stock firmaware. my s ll falling. now it totally like dead.
one more thing. just little back... whenever i plug the charger ... phones temp was going high. and there was no charging sign on phone.
please anyone please help me to fix my phone..
Thanks !
Could it be emmc brick bug?
Have you used CWM to wipe your phone on the 4.0.4 firmware?
Sent from my GT-I9100 using xda app-developers app