[Q] Nand backup? - Hero, G2 Touch Q&A, Help & Troubleshooting

Guys, I am trying to install a new ROM, using this site:
forum.xda-developers com/showthread.php?t=645253
(can't post links yet)
I can't see this:
-> Select Backup/Restore > Nand backup > confirm with Home > Wait
(or Nand + Ext if you have A2SD setup)
The only options I have is :
reboot system now
apply sdcard:update.zip (which doesn't work)
wipe data/factory reset
Can someone please tell me how to do this Nand backup?
Also, my phone isn't picked up by the computer or vice versa when its in recovery mode. Thanks so much guys!

Kr1tikalMas said:
Guys, I am trying to install a new ROM, using this site:
forum.xda-developers com/showthread.php?t=645253
(can't post links yet)
I can't see this:
-> Select Backup/Restore > Nand backup > confirm with Home > Wait
(or Nand + Ext if you have A2SD setup)
The only options I have is :
reboot system now
apply sdcard:update.zip (which doesn't work)
wipe data/factory reset
Can someone please tell me how to do this Nand backup?
Also, my phone isn't picked up by the computer or vice versa when its in recovery mode. Thanks so much guys!
Click to expand...
Click to collapse
You need to root your phone first and install the Clockworkmod recovery, for rooting try to use this tutorial http://forum.xda-developers.com/showthread.php?p=8258942 rooting will void your warranty so be careful!
After that go to the android market and look for Rom Manager, open the app and select "Flash Clockworkmod Recovery", after that turn off your phone, load Hboot (by pressing the volume down button and the power button) and you should be able to find the options that you're looking for!

Related

[Q] How to flash a ROM steps for TB

I am new to rooting and I wanted to flash another ROM other than the stock one after rooting. I followed the steps given to root my TB and that was cake. Thanks for the simplicity. I am now looking to add the Virus ROM but not 100% confident in how to do this. There are several steps given for other devices but I have yet to see one for the TB. If someone could point me in the right direction or link me to the actual steps that would be appreciated.
Install Clockwork Recovery
Boot into CWR
Select "wipe data/factory reset"
Select "yes -- delete all data"
Go back using the softkey
Select "install zip from sdcard"
Select "choose zip from sdcard"
Find and select your desired ROM
Reboot
Download the rom you want which will be store on your phones SD Card in Downloads then make a Backup of the rom you have now . Go into Rom Manager and select backup current Rom , you'll get a pop up were you can name the rom whatever you want , let it do it's thing , it will backup then restart the phone. When the phone restarts go into rom manager again and select Install Rom From SD Card , it will take you to your SD Card where you'll go into Download where the rom is stored , select the rom you downloaded you'll get a pop up which will ask if you want to wipe , check wipe and then ok . Let it do it's thing again when it down it will restart and ask you to set up you accounts just follow the steps . When everything is set up go in to the market and select My Apps you should see all your application downloading give them some time to download. Then it's all up to you to set up your home screens .
Don't forget to wipe the cache partition , and also select advanced and wipe dalvik cache. I would do all the steps listed above and these 2x, just to be on the safe side.
Where can I find those options?
Sent from my rooted Thunderbolt with VirusROM AirborneTB. Xda premium
wish i would have found this like 4months ago...when i rooted my first phone.
jakejonez said:
Install Clockwork Recovery
Boot into CWR
Select "wipe data/factory reset"
Select "yes -- delete all data"
Go back using the softkey
Select "install zip from sdcard"
Select "choose zip from sdcard"
Find and select your desired ROM
Reboot
Click to expand...
Click to collapse
I'm new to Android but have some experience with rooting on other types of devices. I'm looking at flashing this ROM with ROM Manager and the process above: http://forum.xda-developers.com/showthread.php?t=1041514
I think I understand what's happening on the phone when I do this but wanted to make sure. Other than the usual disclaimers about risk of bricking, is there anything else I need to know?
just in case you didn't know how you hold volume down and the power button to get to hboot and then pick recovery from there. otherwise if you just want easy download rom manager from the market
sunflash72 said:
just in case you didn't know how you hold volume down and the power button to get to hboot and then pick recovery from there. otherwise if you just want easy download rom manager from the market
Click to expand...
Click to collapse
Thanks!
+1
thanks works good
jmiller98 said:
Don't forget to wipe the cache partition , and also select advanced and wipe dalvik cache. I would do all the steps listed above and these 2x, just to be on the safe side.
Click to expand...
Click to collapse
Where can I find these options, and in what part of the flashing process should I do them?
Just a quick question, its really not necessary to wipe data and cache very time is it?

[Q] N00b move from BIONIX to Trigger

Hi,
I'm noob that got Vibrant phone (from EBAY) that already ROOTED & ClockWorldMod Recovery V2.5.1.3 - Voodoo Lagfix (I don't how...)
With :
KERNEL : 2.6.32.9
BASEBAND : T959UVKB1
BUILD : BIONIX-V 1.3.1
SUPERUSER V2.3.6
SU BINARY V2.3.1-EF
VOODOO LAGFIX
In recovery I see :
ClockWorldMod Recovery V2.5.1.3 - Voodoo Lagfix (ALL IN RED)
apply sdcard update.zip
wipe data \ factory reset
wipe cache partition
install zip from sdcard
backup and restore
mounts and storage
advanced
voodoo
+++++Go Back+++++
I don't have any backups so I want to install ROM MANAGER from market, I read HERE that if i want to upgrade I need to go go back to stock (I'm really don't know how this version get to the phone and somehow the ROM MANAGER not there...)
Do I must go back to stock or I can download ROM MANAGER, Install it and make something like "Upgrade" - I don't know what is the voodoo lagfix and do I need to uninstall it if I want to:
1. install ROM MANAGER and preform Backup & Restore (most important how to verify my backup OK )
2. Move to Trigger 3.2
Can some guide me with simple steps about how to start (I know that I'm not starting for 0 ether in the phone and ether in my knowledge)
Thanks.
Download Trigger
Install titanium backup, backup all of your apps
Move to internal, /sdcard
Reboot to red recovery
Make a backup
Wipe
Flash, instal from sd
Reboot
Wait
Reboot
Restore
Reboot
this says it all
s15274n said:
Download Trigger
Install titanium backup, backup all of your apps
Move to internal, /sdcard
Reboot to red recovery
Make a backup
Wipe
Flash, instal from sd
Reboot
Wait
Reboot
Restore
Reboot
Click to expand...
Click to collapse
This says it all, but since you are a noob
by wipe, he means to wipe everything (data(factory reset), cache, delvik cache(thats on the advanced options)
As for the titanium backup if you dont know how to use it, just youtube it or go over the threads here
Finally when doing the flash, make sure the trigger 3.2 file is on the sd card
And NO you dont have to go back to stock
1. Do all this without using the Rom Manager?!?!?!? - If I want to install it just download & Install, no any pre-requisit ?
2. when you say Wipe - you mean to "wipe data \ factory reset" or "wipe cache partition" ?
3. Flash, instal from sd = "install zip from sdcard" ?
4. Wait = how much time
5. Restore = Restore what?
Can you direct me to step by step guide for this or input some details?
Thanks alot
Check my signature links.
My steps will do what you need. Nothing more is needed/required.
s15274n said:
Check my signature links.
My steps will do what you need. Nothing more is needed/required.
Click to expand...
Click to collapse
Hi,
I checked your guide and even see the video and I have Q, about the "Rom Manager", I saw In your video that you Use it...
Someone told me that my current ClockWorldMod Recovery is old and I should upgrade it... (I couldn't find in the net \ this forum how to upgrade my current version...).
Someone told me:
1. download from market
2. install it with ROOT
3. click "Flash Clockwork Recovery" and boot to recovery
4. Re-install Packages - I DON'T HAVE THIS OPTION NOW
and from there like in your guide: backup,make all the Wipe, place rom on sd and choose "install zip from sd card"
1. Is it true and should work?
2. should I follow those steps (in this order)
3. should I make a backup before and after I download and "Flash Clockwork Recovery"
4. If I follow this orders should I see the "Re-install Packages" that I don't see now and should I need to use it ?
Sorry for all the questions but I want to "understand" (as much as can) what I'm doing.
Thanks Again
Earlier I was sending you messages from my phone while waiting for an appointment... let me try again...
You have the red voodoo recovery. You do not need anything else. Ignore Rom Manager and all that, you really do not need it, because your ROM replaced this recovery with the stock one. You are good.
Just download the rom
make backups
go flash the rom
enjoy
If you have a specific question or want a better explanation, just let me know.
responses in red.
asher_pa said:
1. Do all this without using the Rom Manager?!?!?!? - If I want to install it just download & Install, no any pre-requisit ? No, you have a recovery that allows you to make backups and flash roms already. Because of this, you can use the step by step guide I gave in post 2 and just be merry.
2. when you say Wipe - you mean to "wipe data \ factory reset" or "wipe cache partition" ?
Yes, and dalvik in advanced like another pointed out.
3. Flash, instal from sd = "install zip from sdcard" ?
Yes
4. Wait = how much time
After you flash the rom, let it just sit for about 10 minutes, then reboot, don't mess with the phone.
5. Restore = Restore what?Your apps if you backed them up... restore your launcher, contacts if you dont use google.. whatever you want to restore, just not system apps (green system apps like wifi and bookmarks should be okay though, exception to the rule for 2.2 > 2.2)
Can you direct me to step by step guide for this or input some details?
Thanks alot
Click to expand...
Click to collapse
when you say: "your ROM replaced this recovery with the stock one." do you mean that after install the new rom I need to make ROOT again? (sorry for my noob)
I make all install (without SIM on the phone).
after the reboot I saw the Android and after few scondes he say to inset sim....
Do I was have to install the new rom with the SIM in it?
PLEASE HELP? (for now I don't know what to do so I'll wait the 15 min)...
ANY SUPPORT? - is it OK?
thanks.
1. Install the ROM with a SIM card in...or if you didn't, insert it like it asks you to.
2. ROM Manager IS clockwork recovery. It is that menu you went into to flash the rom (can be green or red depending on your kernel installed). You don't need ROM Manager because whoever had the phone before you already installed ROM Manager at some point and hence, you have the Clockwork Recovery now as you saw.
3. After you install the new ROM, the boot up will take a long time. It is setting up all the system and configuring the operating system. After it finally boots, leave your phone for 10 minutes and just don't touch it. This gives it time to do a lot of configuration stuff it needs to do when it first starts up. After the 10 minutes are up, restart it. It will now start a lot quicker (like normal) and when its up, you can use it anyway you want. Hence, some first things to do would be to restore your contacts, programs (if you backed them up, settings, etc)
3. I really recommend you read a little bit more before you do flashing like this next time because if people here are not nice and don't lead you by the nose (or if you follow a step wrong), you can **** your phone. The procedure is easy. It is fairly foolproof but it is still advised that you have basic knowledge of what you are doing.
There are a lot of sticky threads on the forums that explain what things are. I recommend you have a look.
Thanks It look like everything is OK now (I read about 15 post before done this...)
Now my Phone Setting look like this:
FW : 2.2
Build : FROYO.UVKB5
KERNEL : 2.6.32.9
TRIGGER VERSION : 3.2- FINAL
BTW:
I'm still see "ClockWorldMod Recovery V2.5.1.3 - Voodoo Lagfix (ALL IN RED)"
1. Does my CWR was needed to be updated too - because its not ?
2. Should I update my kernel too ? - Is there any guide fort this?
Thanks.
SomeOne
I just want to be sure that everything is OK, and find out why my CWR didn't upgrade as well...
Thanks.
OMG!!!!!! Just follow the instructions! It's not rocket science; geez. I know of most noobs who wouldn't even ask this many questions even AFTER the guide/tutorial/step-by-step instructions are in front of them. I give you my word that you WILL NOT brick your Vibrant just by trial and error.
asher_pa said:
I just want to be sure that everything is OK, and find out why my CWR didn't upgrade as well...
Thanks.
Click to expand...
Click to collapse
I don't understand why you are so set on the CWR upgrading.... and just an FYI, the red recovery (.3) is a higher version than via Rom Manager (.2).
Be happy. Move on to something else now that YOUR PHONE IS FINE
(meant in the nicest way possible, hard to understand text via Internet).

LG p500 How to install Android Icecream Step By Step

These are the steps I followed yesterdat night to update my Lg optimus p500 to Android 4. I have collected all these from different posts & Sites, So thanks to them who really made this possible. After reading lot of posts you might be confused about the steps & Base band. I m telling you a simple way-
STEP 1- Attach your phone to LG pc suit & update phone software so that by default your phone base band will be updated to 20_ . You can see it from settings > About Phone.
Step - 2 Root Your Phone.
1. First of all, grab root package from the link ( http://depositfiles.com/files/lou8ae8uh )
2. And download needed driver pack , and install on pc then reboot pc (http://depositfiles.com/files/a45wh9f07 )
3. Enable usb debugging mode by going to settings>applications>developer on phone.
4. Extract root.rar to safe place like desktop.
5. Go to ADB folder , if you are on window 7 run cmd7.exe OR if you are using Windows xp then run cmdXP.exe .
6. After starting cmd7 or cmdXP, type following commands in Red Color
adb devices
then
adb shell
(symbol will change to $ or #)
echo 1 > /data/local/lge_adb.conf
7. After doing this, Reboot your phone
8. Now go to root folder on desktop again, and start SuperOneClick.exe
9. Select GingerBreak method and press root button
10. Wait few seconds and its done.
STEP- 3
1. Install Rom Manager from market on phone.
2. In rom manager application Click on install clockworkmod..
3. Boot Your Phone in Recovery Mode (Volume Down + Home + power Key)
4. Go to the main recovery menu and follow the below steps one after another to wipe data, cache and system.
‘Wipe Data/Factory Reset’ –> Yes
Mounts and Storage’ –> Format /system –> Yes.
‘Mounts and Storage’ –> Format /boot–> Yes.
‘Advanced’ –> Wipe Dalvik cache –> Yes
5. Switch off Phone & Remove memory card.
Now You are going to install rom-
6. Put the Rom & Gapp files (You can download from Here http://forum.xda-developers.com/showthread.php?t=1614420 ) on your SD Card’s main folder (With help of card Reader) for easy navigation since the recovery mode is tough to navigate with hard keys.
7. Put memory card back to phone & Reboot the phone in recovery mode again, After this choose install zip from sdcard option
8. Select the ROM (the same file that you just downloaded, beta_testing.zip) to install – your ROM will begin to install.
9. Once installed press the back button few times to go back to the main screen of Clockwork Recovery.
10. Choose reboot system now
11. Reboot Phone in Recovery mode & again install Gaapp app from sd card similarly & Reboot phone again.
People who wants exter like SD partition
WARNING!
THIS WILL DELETE EVERYTHING!
(SD CARD AND YOUR CURRENT ROM)
I am going to explain how to partition your sdcard for more user app memory..
This will give you about 1GB of storage to store more apps on!
1. Backup everything from your sd card and apps
(this will format your sd card and apps)
2. Boot into clockworkmod
3. Go to advance
4. - Partition SD Card
5. - 1024M (1GB)
(recommended for smaller sd cards)
6. - 0M
After this step the phone will just sit there for a while just leave it alone and it will say done when it's done!
Important!
- Wipe Dalvik Cache
- wipe data/factory reset
- wipe cache partition
Reboot your phone/ or install a custom rom (your choice as described above)
Download Link2SD from the market
Run Link2SD and a thing should pop and click on ext2 then reboot the phone..
First step can be simplified.
I used Unlock Root tool to root my phone 2nd time after i unbrick it.
And it works!
http://www.unlockroot.com/index.htm
The phone must be in debuging mode.
There are tons of guides already...and u must mention about wiping before flashing the zip! Otherwise this guide is wrong!
Sent from my LG-P500 running Ginger Snap
healthhome said:
3. Boot Your Phone in Recovery Mode (Volume Down + Home + power Key)
4. Go to the main recovery menu and follow the below steps one after another to wipe data, cache and system.
‘Wipe Data/Factory Reset’ –> Yes
Mounts and Storage’ –> Format /system –> Yes.
‘Mounts and Storage’ –> Format /boot–> Yes.
‘Advanced’ –> Wipe Dalvik cache –> Yes
5. Switch off Phone & Remove memory card.
Click to expand...
Click to collapse
Are you sure you followed the steps exactly as you have written?
Coz i think without boot partition, the device would not be able to boot unless you install a new rom(which has boot partition) before switching off or rebooting.
GobletSky31689 said:
Are you sure you followed the steps exactly as you have written?
Coz i think without boot partition, the device would not be able to boot unless you install a new rom(which has boot partition) before switching off or rebooting.
Click to expand...
Click to collapse
I've tried that already, you can boot into recovery, but not start the OS. Then the Fastboot Mode appears.
Gesendet von meinem LG-P500 mit Tapatalk 2
if i update my phone ll it unroot my phone
Aragon4realz said:
if i update my phone ll it unroot my phone
Click to expand...
Click to collapse
Our phone doesn't have official ICS.Only custom made ICS is there.Therefore u need a rooted phone to flash it.Just like flashing custom ROMs.
It wont unroot ur device.
OP: I think u should edit ur post and put a proper guide.Otherwise people will be mislead.
Sent from my LG-P500 running Ginger Snap
IKnowIRock! said:
Our phone doesn't have official ICS.Only custom made ICS is there.Therefore u need a rooted phone to flash it.Just like flashing custom ROMs.
It wont unroot ur device.
OP: I think u should edit ur post and put a proper guide.Otherwise people will be mislead.
Sent from my LG-P500 running Ginger Snap
Click to expand...
Click to collapse
All i meant to say is that,if i update my phone to the official gingerbread for o1 ll it unroot it.cos i need to do this to get the new baseband.
Aragon4realz said:
All i meant to say is that,if i update my phone to the official gingerbread for o1 ll it unroot it.cos i need to do this to get the new baseband.
Click to expand...
Click to collapse
Yep it'll unroot ur device.If ur on a custom rom, u have to flash official firmware (either froyo or GB).
Eitherway it unroots ur device.But now rooting is just a minutes work so better to update the baseband and root again.
P.S. I think u can update the baseband without flashing original firmware, but I am not sure about it.May be u could search for it.
This might help u : http://forum.xda-developers.com/showthread.php?p=15250036
Sent from my LG-P500 running Ginger Snap
thanks for your effort to help me,i think i found a solution to my problem they call it oldbb fix.it worked out just fine,am still on my old baseband and am running gingersnap now v1.3 and i heard it works on ics i havent tried it yet cos i don't know any Rom on ics with less bug
Aragon4realz said:
thanks for your effort to help me,i think i found a solution to my problem they call it oldbb fix.it worked out just fine,am still on my old baseband and am running gingersnap now v1.3 and i heard it works on ics i havent tried it yet cos i don't know any Rom on ics with less bug
Click to expand...
Click to collapse
I knew about it, but u know just for convenience if u root ur phone with new baseband then u wont have any trouble ever...
Anyways glad I could help u
Sent from my LG-P500 running Ginger Snap

Backup original rom S3

I want to make backup of original rom.
Can i do it with clockworkmod rom menager. I want to instal rom menager with odin and do a backup.
Will that work. I want to save original rom because of Product warranty.
"To save your current Stock Firmware"
1.- Be sure you have installed a custom recovery on your SGS3 like ClockWorkmod.
2.- Get into recovery mode (volume down + home button + power button at the same time)
3.- select the "option back up and restore"
4.- then select, "Create a zip file" (this option will create a flashable zip of your current firmware that could be restored at anytime and is located in your internal SD card)
Hope i have helped
read before posting anything
http://forum.xda-developers.com/showthread.php?t=2240291
You dont need rom manager. Use recovery without it
Sent from my GT-I9300 using Tapatalk 2
Rudroid Yam said:
"To save your current Stock Firmware"
1.- Be sure you have installed a custom recovery on your SGS3 like ClockWorkmod.
2.- Get into recovery mode (volume down + home button + power button at the same time)
3.- select the "option back up and restore"
4.- then select, "Create a zip file" (this option will create a flashable zip of your current firmware that could be restored at anytime and is located in your internal SD card)
Hope i have helped
Click to expand...
Click to collapse
Never Stop Learning :good:
If u are using twrp then,
-First ensure that u have installed any custom rom or stock
-then go to backup option in twrp, it will ask u what u wanna backup, either Cache ,EFS, System, etc.
-then swipe to backup
-after backup finished, you can restore it back from restore option
And u can also save it on your laptop or pc and then again paste it on your sdcard or device storage/TWRP/64UR748848/and ur backup
If I helped u pls hit on thx button.

[Q] flashing cfw on sd with cwm the same steps or different?

hi i have used mindcr 2.9 rom i like it but wanted ro try different rom. well i have flashed mindcr many times cause i deleted something i need. so i toght i should try ankther rom in this case i chose simplicity v4 . but i cold not go into download mode only recovery so i wanted to flash back stock rom but i coldnt tried everything epcept the usb jig .. anyways i sent it to repair.. ill be getting it tomorrow. it was working only thing download mode did not work i tried all methods no luck . so here is my question... can you install another rom over mindcr with cwm? i search and many people said yes. so i did an phone got hard brick. if it dont matter then the procedure that i followes was wronf. are all roms installed trhu cwm in sd ca rd always the same dprocedure??? if so should i used the mindcr that i been using. any link for simplicity v4 ultimate i dont want v5 procedure from mind ans simplicity were almost the same are roms always installed the same procedure? i think if u can install a rom over anoher rom installed procedure from place i followed bricked my phone... thanks
It is best to install a Rom over stock. Even flashing over a Rom works sometimes. And yes every Rom is installed through cwm or e3 recovery. Simplicity v4 should be flashed the same way as mindcr Rom.
Sent from my GT-S5830i
Mohinkx said:
It is best to install a Rom over stock. Even flashing over a Rom works sometimes. And yes every Rom is installed through cwm or e3 recovery. Simplicity v4 should be flashed the same way as mindcr Rom.
Sent from my GT-S5830i
Click to expand...
Click to collapse
thanks mohink yes that is what am trying to do go back to stock and install a rom over it. but tried all the fixes into going to download mode except the jig usb as am in mexico in a really small town. so i took it to a place to get it flashed... so should i try the simplicity v4 following the mindcr procedure... since am new to android plataform ..
how do i do a buck up just in case i messed up is thereba way to buck up how????
i aint staying stock hahah just want tobmake sure i dobit the rifht way... thanks guys
When you go into CWM recovery, there should be a section called Backup/Restore. Back up here, it Will take about 150mb-350mb of your sd card depending on what you have. So if flashing your Rom goes wrong you can go back to CWM and restore.
Then follow the procedure which is
- Root
- CWM
- Mount everything (it should look like unmount/system, unmount/data etc)
- wipe data and cache
- Advanced » wipe dalvik cache
- Mount everything again
- Install .zip from sd. Find the Rom and flash it.
This procedure will definitely work. If it doesn't just restore and try again.
Also, don't say thanks, but press it if I helped you
Sent from my GT-S5830i
Mohinkx said:
When you go into CWM recovery, there should be a section called Backup/Restore. Back up here, it Will take about 150mb-350mb of your sd card depending on what you have. So if flashing your Rom goes wrong you can go back to CWM and restore.
Then follow the procedure which is
- Root
- CWM
- Mount everything (it should look like unmount/system, unmount/data etc)
- wipe data and cache
- Advanced » wipe dalvik cache
- Mount everything again
- Install .zip from sd. Find the Rom and flash it.
This procedure will definitely work. If it doesn't just restore and try again.
Also, don't say thanks, but press it if I helped you
Sent from my GT-S5830i
Click to expand...
Click to collapse
tahnk you mohinkkx .. yup already used the thanks button didnt know about it.. ill do jus that as sooos as i get it... here is the procedure that i flashed many times using mindcr..
1) Copy the rom file.zip and ClockWorkRec.zip in the root of your sd card.
2) Turn off the phone and turn it into recovery mode by pressing: Volume up + home + power. (To navigate the menu use the volume keys, to select the home, and back to return).
3) You are going to "apply update from sdcard" and choose ClockworkRec.zip
4) wipe data / reset - YES
5) advanced - Wipe Dalvik Cache - YES
6) Press back (go to main menu)
7) mounts and storage - format /system - YES
8) mount /system (it change to unmount) - Press Back
9) Select "install zip from sd" / "choose zip from sd card"
10) Select Rom.zip file - YES.
11) Wait Flashing. And press back.
12) reboot system now - Enjoy
raptorddd said:
tahnk you mohinkkx .. yup already used the thanks button didnt know about it.. ill do jus that as sooos as i get it... here is the procedure that i flashed many times using mindcr..
1) Copy the rom file.zip and ClockWorkRec.zip in the root of your sd card.
2) Turn off the phone and turn it into recovery mode by pressing: Volume up + home + power. (To navigate the menu use the volume keys, to select the home, and back to return).
3) You are going to "apply update from sdcard" and choose ClockworkRec.zip
4) wipe data / reset - YES
5) advanced - Wipe Dalvik Cache - YES
6) Press back (go to main menu)
7) mounts and storage - format /system - YES
8) mount /system (it change to unmount) - Press Back
9) Select "install zip from sd" / "choose zip from sd card"
10) Select Rom.zip file - YES.
11) Wait Flashing. And press back.
12) reboot system now - Enjoy
Click to expand...
Click to collapse
Okay this time, don't format system.
Sent from my GT-S5830i
Mohinkx said:
Okay this time, don't format system.
Sent from my GT-S5830i
Click to expand...
Click to collapse
will that erase the buck up.?? no phone yet i was tol they cnat get it flashed... ill go today see whatts the deal..
raptorddd said:
will that erase the buck up.?? no phone yet i was tol they cnat get it flashed... ill go today see whatts the deal..
Click to expand...
Click to collapse
No, the backup is on the sd card. Just don't format system.
Sent from my GT-S5830i
mohinkx said:
no, the backup is on the sd card. Just don't format system.
Sent from my gt-s5830i
Click to expand...
Click to collapse
ok i dont have it yeet.. Place where i send it could not unbricked it .. Sent it to other place i should b getting today if he cant then ill take it to telcel customer service..i dont think it has warraty though...

Categories

Resources