I flashed a custom rom onto my unlocked/unbranded streak and want to go back to stock 2.2. I have a nandroid backup but I would prefer the stock 2.2. Where can I download a full update.zip (or similar) to be flashed with clockwork 2.5.0.1 onto my US streak?
i dont know if there is a stock 2.2 in a zip
the only way i cud get a 2.2 on ine was to use QDL tool and that got me a pre release 2.2 on my streak and got the streak recovery working so you could download a stock 2.2 from the dell site and put that as #update.pkg on ur sd card and update that way then put clock work back on if u wanted i guess
here you go at the bottom...http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak
SOLVED Post Locked
Related
i dont know what to do i was running Eugene Froyo perfectly and wanted to add a lag fix and i did and since then it had been stuck there and when i do reinstall packages in take me to the regular clockwork recovery 2.5.0.4 please help me asap i need a phone and i dont know how to load another rom onto it
cant you just re-flash eugenes froyo from CW?
or if you connect your phone, and boot into CW, you should be able to adb push a stock kernel/rom like Eugene's Vibrant9, and flash.
I have a Dell Streak! I have done everything that Modaco's Dell streak roms page has instructed. I just cant get it. I have Rom Manager, I have flashed clockwork recovery. its just not working. Anybody have any advice? HELP!
paulsendrake said:
I have a Dell Streak! I have done everything that Modaco's Dell streak roms page has instructed. I just cant get it. I have Rom Manager, I have flashed clockwork recovery. its just not working. Anybody have any advice? HELP!
Click to expand...
Click to collapse
I'd go fully back to stock and start again if i were you.
Flash stock recovery
Flash stock 1.6
Flash clockwork recovery
Flash paul's 2.1 (I think this is necessary, i can't remember)
Flash 2.2
Done
Also, what's ROM Manager? Oo
So i just updated to the new official and i HATE it
its slow buggy and crappy ( im even forced to keep fox news as a bookmark. Good lord)
I rooted it with oneclick and installed clockwork but no matter what i do it only boots to the samsung recovery mode. When im in there i cant run update.zip it says it cant fully verify
im at the point where i just want to throw this phone away.
1st im warning everyone to be sure they know what they are getting in to when they do the official upgrade and 2- im begging for help. What do i dooooo
http://forum.xda-developers.com/showthread.php?t=747335
use the third one on the page should say T MO JFD
odin back to 2.1 and flash a custom ROM
(like Team Whiskey's NERO ROM)
!!!!!!!!!!IM NOT RESPONSIBLE FOR WHAT MIGHT HAPPEN TO YOUR PHONE IF SOMETHING DOES GO WRONG!!!!!!!!!!!!!!!
Video of how to use ODIN
http://martint.net/2010/how-to-use-odin-to-go-back-to-stock-jfd-2/
Thank you!!!!
I will give it a shot right now and I'll let you know how it goes
(THANK YOU THANK YOU THANK YOU THANK YOU!!!!!)
Ok
So odin flashed and i'm back to 2.1 BUT even after installing clockwork, flashing clockwork recovery & rebooting into recovery (& reinstalling packages many times) it doesnt load to clockwork, just stock recovery manager
any ideas?
WEEEEEEEEEE!!!
Ok for anyone else in my situation do NOT use one click. use the update.zip method to unlock.
Run Odin and flash it to stock 2.1, put update.zip on your internal flash memory
After that delete update.zip, install clockwork & do your thing!
Please help me how to downgrade from 2.3.3 to 2.2.2.
Please help me.
I am using dell streak 5
You have to be a little clearer... There is no gingerbread for the Streak except for StreakDroid 2.0, if you want to get back to a Froyo build, 2.2, all you have to do is flash StreakDroid 1.9.1 or 1.9.0.
Use the SEARCH and you can easily find out how this is done
I want to go to OFFICIAL 2.2.2 Version.
You can easily download the stock 351 update.pkg and stock recovery from the Dell Streak Wiki. Flash the stock recovery and then boot into recovery. Once in recovery choose option 2 to install the update.pkg which you have downloaded and put in the root of your external SD card. The recovery will see that update.pkg and begin to write it to your phone. You will probably have to do a factory reset to get it to boot
I got a new streak because my last one was acting up (warranty). The old one was rooted and had BB351. This new one came ATT Locked with BB347. Like a moron, i had the 351 Update.pkg on the sdcard and i tried updating via the new streak (holding down the power button and volumes buttons and selecting #2 update via sdcard).
now, no matter what i do, i get stuck at the logo. Any advice to just getting it back to normal?
you need to flash the 351 recovery img to use with the 351 install pkg, using the latest multirecovery flasher tool is the easiest way to do so, to save writing script. there are posts on how to do so in these forums
Sc00terage said:
you need to flash the 351 recovery img to use with the 351 install pkg, using the latest multirecovery flasher tool is the easiest way to do so, to save writing script. there are posts on how to do so in these forums
Click to expand...
Click to collapse
meaning can't directly upgrade 347 to 354? or upgrade to 351 first, then do another upgrade to 354? I got the same issue here...
cocaice2009 said:
meaning can't directly upgrade 347 to 354? or upgrade to 351 first, then do another upgrade to 354? I got the same issue here...
Click to expand...
Click to collapse
If you are running 347 with stock 347 recovery you can try an OTA upgrade by downloading the 351 .pkg file direct to your phone and then tap on the DL notification in the notification tray. You should be on wifi to do this. You need a stock recovery to install the .pkg files. Checks are made to prevent installation of ROM from a different region. Since 347 and 351 are both 00 roms (retail unlocked) the upgrade from 347 to 351 may work. The advantage of this method is that you don't lose your settings and apps as you do when installing after booting into recovery and installing the package after it has been renamed to update.pkg.
You can't go directly (without using 354's recovery) from 351 to 354 because they are for different regions.