hi all after having my phone repaired it came back as a stock 1.5 android phone i rooted it and then flashed a custom recovery image to hack my ps3 iv now updated my ps3 to play online and no longer need the psfreedom mod to use backup games on my ps3 so iv now reflashed the recovery console with amon-ra's recovery image and performed a nandroid backup
now as the OTA update to 2.1 doesnt work as its rooted with a different recovery image im looking to flash a custom rom. i did try the modaco custom rom but after a succsefull flash all i now get when the phone loads is a message saying "sorry the application htc sense (process com.htc.launcher) has stopped unexpectedly. please try again"
so i was wondering what roms people would recomend 2.1 preferably unless theres a 2.2 rom thats stable and isnt slow and is worth using (i havent researched 2.2 roms iv done a fair bit of reading on 2.1 roms though)
and i must admit im pretty much a newb when it comes to phones (although im pretty technically minded with pc's) so i havent flashed a radio or anything like that and would not be to sure how to go about it if i needed to so a rom that would work with my current radio would be preferable although with a good guide im willing to flash the radio if neccasery i just dont want to brick my phone
or failing that does anyone know where i can get the official 2.1 as zip file to flash via recovery
here are stock 2.1 zip files http://www.villainrom.co.uk/forum/showthread.php?1876-Stock-GSM-HTC-Hero-2.1-Update-Files-here! hope this helps as for best 2.1 roms just flash and give them a try i like rcmix and ezhero.
Related
Just got my HTC Hero a few days back. It was a Malaysian set without the Android market. I got fed up with the crappy apps installer it came with so I followed one of the tutorials in the forum and had it rooted (i think) and upgraded to the international version.
Old version
Build: 2.73.728.5 146733 CL#61267 release-keys
New Version
Build: 2.73.405.5 146733 CL#61267 release-keys
I got the android market and I'm loving it. I loved it so much that I ran out of memory and sorta crashed the phone. I did a factory reset and re-flash the firmware. Then I found out about apps2sd. I've been digging into the forum on guides to set it up but none of them actually worked.
Can some gurus on this here forum please write a short guide on how to manually install apps2sd?
My current setup:
Phone just rebooted clean after a wipe. The ROM is the international stock ROM. The recovery image I've installed is the AMON-RA version. My SD card has been formatted using the AMON RA Recovery console, so by right it should have all the necessary partitions. The radio is still stock as I have never updated it to anything else (didn't have enough information to realize the full implications of updating the radio, so I put that on hold for the time being)
What do I do next? I have installed terminal emulator though as I gather from the forums that it's a must.
I'm begging all gurus out there to please shine some light on this dark crater I'm in.
why not just stop using crappy stock roms and flash the latest modaco? its a lot faster, has more featues and app2sd is build in. do a nandroid backup for safety, and use a backup tool of your choice (i bought my backup pro, its not cheap, but i dont like the free ones, they have never worked well for me) for your contacts etc.
Its realy easy, a lot easyer than trying to get apps2sd runnig right on a stock rom (I dont know if that is even possible)
Ouch~ Really that crappy huh......
As per your suggestion, I flashed my ROM to 3.1-update-hero-modacocustomrom-core-signed.... either I messed up or it's actually a feature with the rom.... but my social networking apps just won't work after that. It's just a bit too advance for me at this juncture.
So I'm back to the updated official ROM again....
Any takers on the guide to manually installing apps2sd???
Is all hope lost?? I was hoping that someone would have had the experience of installing apps2sd from scratch.
Custom roms are good and all but blind reliance on them don't sit too well with me. The custom roms are in every aspect PERFECT but what I am trying to achieve is a better understanding of how the thing works. What better way than to put a hold on the shortcuts and doing it the manual way.....
Im looking for the same thing man... just want to add the app2sd to the stock htc hero cmda rom after rooting...
Anyone???
Unlikely, the only people capable of producing these guide are the type of people who DO install custom roms. If you're that fussed you'll work it out yourself and produce the guide yourself.
Its 100 times easier to just get a custom rom installed.
Okay, I just rooted my brother's HTC Hero (GSM Unlock) and updated it to 2.1 Villain, but there were some bugs, like in the messages app, the key board wouldn't show up in a conversation. FB Sync wouldn't sync pictures to his contacts. Is there any way I can downgrade back to the original 1.5? If so, can anyone give me a link to download that .zip? thanks!
*note* I tried flashing the official 2.1 update, it failed
And what is a Nandroid backup? Can I restore it with that?
simonlcheng said:
Okay, I just rooted my brother's HTC Hero (GSM Unlock) and updated it to 2.1 Villain, but there were some bugs, like in the messages app, the key board wouldn't show up in a conversation. FB Sync wouldn't sync pictures to his contacts. Is there any way I can downgrade back to the original 1.5? If so, can anyone give me a link to download that .zip? thanks!
*note* I tried flashing the official 2.1 update, it failed
And what is a Nandroid backup? Can I restore it with that?
Click to expand...
Click to collapse
You really should have read up before just rooting and flashing. A nandroid backup is a backup of the phone so you can restore to how it was before you started to play with it.
You can download the rom you require here.
You should have done a Nandroid backup before trying to flash a new ROM, this is a MUST DO everytime you plan on messing around with the phone, it would simply let you restore the backup back to normal.
You need to do a full wipe of the phone and flash the new ROM posted above.
Jamie.
Can I just flash a stock rom of the HTC Hero generic? I flashed a rooted one, but I keep getting this notification about an OTA,I tried installing it, but it fails. If I flash a stock rom (if possible) can I install the OTA's?
I seem to be having somewhat the same problem.
Although I didnt flash my hero to that custom rom you're mentioning.
The problem is that I've been running the modaco 3.0 rom for quite a while and wanted to get the stock 2.1 rom.
I've tried to flash it using the HTC tool but couldn't be done. I accidently overrided my nandroid backup of the stock 1.5 rom so I found a stock 1.5 on modaco's forum and flashed it.
Now I'm running 1.5, build 2.73.405.5
Every time I wipe the phone and start from scratch (setting up the phone as if it was new) I get a notification about a new OTA update. When I try to update it, the phone resets (seems fine) and it ends up in Nandroid and doesn't get any further.
Then I chose to reboot the phone and the phone runs as normal but still no new firmware.
What am I doing wrong?
I've also tried the HTC tool for flashing the ROM but end up with a connection error (170).
I have of course wiped the phone but it doesn't help...
Pinnodyr said:
I seem to be having somewhat the same problem.
Although I didnt flash my hero to that custom rom you're mentioning.
The problem is that I've been running the modaco 3.0 rom for quite a while and wanted to get the stock 2.1 rom.
I've tried to flash it using the HTC tool but couldn't be done. I accidently overrided my nandroid backup of the stock 1.5 rom so I found a stock 1.5 on modaco's forum and flashed it.
Now I'm running 1.5, build 2.73.405.5
Every time I wipe the phone and start from scratch (setting up the phone as if it was new) I get a notification about a new OTA update. When I try to update it, the phone resets (seems fine) and it ends up in Nandroid and doesn't get any further.
Then I chose to reboot the phone and the phone runs as normal but still no new firmware.
What am I doing wrong?
I've also tried the HTC tool for flashing the ROM but end up with a connection error (170).
I have of course wiped the phone but it doesn't help...
Click to expand...
Click to collapse
I have the same problem! And when I do flash 2.1, the keyboard never appears when I go to the messages app. I just flashed an official stock 2.73.405.66 build, what if I do the OTA? Will it fail too? 'Cause I think it fails because last time, my phone was rooted.
Anyone got help? :-/
Hey everyone.
I recently rooted my Hero GSM phone and tried to play around with some Custom Roms.. I'm currently running FroydVillain with a 691 kernel and I like it a lot, but want to know if there's any other Roms running smoother on the Hero packing Froyo..
I used to have the official eclair (2.1) with launcherpro installed, but wanted to try Froyo out because I heard that it runs 450 % faster than eclair. And since I went over to Custom Roms my batterytime has been lowered significantly..
Also if anyone could tell me what RADIO's are I would be very happy
Sorry for all the questions, but I have just one more..does updating the recovery software help on performance? I have an old version I think.. can anyone please link the newest?
I find the market of available Roms so large and wanted to know if anyone could recommend some Roms and include some links on where to get..
Froyo prefered since I just got used to how it works.
Thanks in advance
Sent from my HTC Hero using XDA App
Hammerbak said:
Hey everyone.
I recently rooted my Hero GSM phone and tried to play around with some Custom Roms.. I'm currently running FroydVillain with a 691 kernel and I like it a lot, but want to know if there's any other Roms running smoother on the Hero packing Froyo..
I used to have the official eclair (2.1) with launcherpro installed, but wanted to try Froyo out because I heard that it runs 450 % faster than eclair. And since I went over to Custom Roms my batterytime has been lowered significantly..
Also if anyone could tell me what RADIO's are I would be very happy
Sorry for all the questions, but I have just one more..does updating the recovery software help on performance? I have an old version I think.. can anyone please link the newest?
I find the market of available Roms so large and wanted to know if anyone could recommend some Roms and include some links on where to get..
Froyo prefered since I just got used to how it works.
Thanks in advance
Sent from my HTC Hero using XDA App
Click to expand...
Click to collapse
Latest Recovery: http://forum.xda-developers.com/showthread.php?t=561124
The radio I recommend is the latest GSM one at http://www.villainrom.co.uk/forum/showthread.php?307-radio-roms-download-links
Are you using latest Froyd, as we've got reports of 2 full days of battery life.
But 450% is an exaggeration, as it's based on a nexus 1 without vs. with JIT. You should get > 5 Mflops though in linpack using froyo.
Regarding the question in the title. You could search around here a little on Q&A since it has been asked a lot of times But mostly you'll get the answer that it's different from person to person and everyone has their favourite ROM for instance my favourite ROM is Cronos (anything) but I'm guessing pulser_g2's would be VillainROM (LOL)
Lol. Yeah it depends on what you want. I mentioned Froyd as you're on it already, but sense 2.1 roms do still exist, though you might try disappointed with performance.
I used a sense rom recently and had to remove it as I couldn't bear the slowness, even with oc.
But yeah, search is your friend. Decide what you want, and you'll find it here.
Thanks for the links.
Yeah well, I spent almost an hour reading about different Roms here and there and I see that it's kinda up to one self what you like about the different Roms. I've been very happy with FroydVillain so far, but I guess I should go ahead and give some of the others a try.
I've just backed up my current phone settings with "Titanium Backup" but is this enough if I decide to try a new Rom and want to go back later on? or should I do a nandroid backup?
And again when I flash over the new recovery.img.. Do I need to backup anything beforehand?
My Froyd version is the latest and I've kept on updating whenever I saw new updates. And yeah, two days is in my opinion not much. Beforehand, on the official 2.1, I could easely tweak 4-5 days out of my standard Hero battery, but I guess this has something to do with the kernel?
Sorry.. I'm really a newbie on this
Hammerbak said:
Thanks for the links.
Yeah well, I spent almost an hour reading about different Roms here and there and I see that it's kinda up to one self what you like about the different Roms. I've been very happy with FroydVillain so far, but I guess I should go ahead and give some of the others a try.
I've just backed up my current phone settings with "Titanium Backup" but is this enough if I decide to try a new Rom and want to go back later on? or should I do a nandroid backup?
And again when I flash over the new recovery.img.. Do I need to backup anything beforehand?
My Froyd version is the latest and I've kept on updating whenever I saw new updates. And yeah, two days is in my opinion not much. Beforehand, on the official 2.1, I could easely tweak 4-5 days out of my standard Hero battery, but I guess this has something to do with the kernel?
Sorry.. I'm really a newbie on this
Click to expand...
Click to collapse
If you want to go back you need a nandroid backup yes. If your talking about updating your recovery image (lol I'm guessing) no you don't. Just flash it. And the battery has something (everything ) to do with the kernel but if you want better battery set you min freq of your CPU lower or you can lower the max freq.
I see..
Thank you very much for answering.
I have just one minor problem..
How the heck do I flash over the recovery image? Don't I use the FlashRec-thingy? Might have deleted it at some point :S
Hammerbak said:
I see..
Thank you very much for answering.
I have just one minor problem..
How the heck do I flash over the recovery image? Don't I use the FlashRec-thingy? Might have deleted it at some point :S
Click to expand...
Click to collapse
I reccomend you flashing Amon-RA. There is a guide in his thread on how to flash it But if you want the ultimate easy noob thing you can download ROM manager from the market which will alow you to download and flash a pretty descent recovery in one click
Yeah.. Flashing Amon-RA is what I'm trying to. It seems I have the 1.5.2 version installed and I just downloaded the 1.7.0 one..
The first time I flashed "Amon-RA" did it with the help of a program called FlashRec. I followed the guide on theunlockr.com and I now end up with a message: "Backup FAILED: Could not run command." when I try to "Backup Recovery Image" through that FlashRec program.
I have an idea of how to work around this but I'm not 100% sure this is what's needed..?
Could I run the phone into recovery mode (through that 1.5.2 Amon-RA thingy) and then flash the never version right onto it or is this the wrong procedure?
Hammerbak said:
Yeah.. Flashing Amon-RA is what I'm trying to. It seems I have the 1.5.2 version installed and I just downloaded the 1.7.0 one..
The first time I flashed "Amon-RA" did it with the help of a program called FlashRec. I followed the guide on theunlockr.com and I now end up with a message: "Backup FAILED: Could not run command." when I try to "Backup Recovery Image" through that FlashRec program.
I have an idea of how to work around this but I'm not 100% sure this is what's needed..?
Could I run the phone into recovery mode (through that 1.5.2 Amon-RA thingy) and then flash the never version right onto it or is this the wrong procedure?
Click to expand...
Click to collapse
Lol thats excatly how I rooted my phone too (same recovery and website even) Look in the thread it's described how you flash the new recovery via ADB
Yeah ehm... I'm kinda new to this so all his "code" or whatever it is doesn't give me a hell lot of clues..
Install
There are several ways to install a custom recovery, choose the one that suits you most (I probably forgot a few).
via adb -> Requires a custom recovery (with test-keys) like Cyanogen's v1.4 or my previous recovery
Code:
Copy recovery-RA-hero-v1.7.0.1.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-hero-v1.7.0.1.img
Click to expand...
Click to collapse
I fixed the steps underlined but after that I kinda went cold on what the **** to do :S
I boot into my recovery and what I get from his "guide" is that I my Hero should do something when I plug in the USB cable.. but nothing happends.. anyone who can put it down in baby-steps for me? :O
There's another way to do this it seems (2nd guide in his thread) but it seems to involve even more "code" so I guess I'll settle with this if it's possible.. :S
Hammerbak said:
Yeah ehm... I'm kinda new to this so all his "code" or whatever it is doesn't give me a hell lot of clues..
I fixed the steps underlined but after that I kinda went cold on what the **** to do :S
I boot into my recovery and what I get from his "guide" is that I my Hero should do something when I plug in the USB cable.. but nothing happends.. anyone who can put it down in baby-steps for me? :O
There's another way to do this it seems (2nd guide in his thread) but it seems to involve even more "code" so I guess I'll settle with this if it's possible.. :S
Click to expand...
Click to collapse
For you I would just recommend installing "ROM manager" from the market and then let it install ClockworkMod recovery that should do for you
EDIT: There seems to be an issue with ROM manager at the moment. It wont flash...
Yeah.. Might as well try this out since no one wants to point out on how to it the "geeky"-way
EDIT:
I seem to get an error when trying to flash the ClorkworkMod Recovery.. Any idea why?
Nvm.. Some dude (erasmux) has made an update.zip and uploaded to the Amon-RA post.. it did the trick
hey
so i bought an optimus one this week and have already noticed the touch lag and stuff.
was always gonna root it, and have done jailbreaking on ipt/iphones but i know nothing about the android equivalent apart from what i have googled since then.
have read http://forum.xda-developers.com/showthread.php?t=901247 and a lot of other stuff and i thought i got it, but obviously i didnt.
basically, phone was on 2.2.2 so i downgraded to 10a 2.2 so i could root. ran z4root, installed custom recovery and then flashed milk_os's fixed kernel onto it.
kept showing "android.process.acore has stopped working" errors on screen, and i thought i could just upgrade back to 2.2.2 without breaking the kernel.
couldn't find a download of the latest firmware (but have since then) so i used pc suite 4 to update.
phone is back in 2.2.2 but root is gone and kernel is back how it was before.
tl;dr what i want to know is the difference between a rom and a kernel, and if it is possible to update the OS without changing the kernel, or root on 2.2 and then update to 2.2.2 without removing root so i can then install the milk_os kernel.
i have a copy of the latest update 2.2.2 from my provider which i can install with recovery if it will stop it overwriting kernel and/or removing root.
alternatively, cm7 is a 2.3.3 rom, is it worth just downgrading, rooting and flashing that? i assume that wont break my root
sorry for noobness, i just want to play angry birds without lag and im a compulsive fiddler/breaker.
PS also, if i go to 2.3 gingerbread am i correct in thinking my class2 microsd card will not work anymore on account of app2sd or whatever?
can someone please just tell me the best option for me, i have tried to google and read myself to find an answer but new to the scene and some things seem to be taken as understood and i don't get them at all.
thanks
terrycurls said:
hey
so i bought an optimus one this week and have already noticed the touch lag and stuff.
was always gonna root it, and have done jailbreaking on ipt/iphones but i know nothing about the android equivalent apart from what i have googled since then.
have read http://forum.xda-developers.com/showthread.php?t=901247 and a lot of other stuff and i thought i got it, but obviously i didnt.
basically, phone was on 2.2.2 so i downgraded to 10a 2.2 so i could root. ran z4root, installed custom recovery and then flashed milk_os's fixed kernel onto it.
kept showing "android.process.acore has stopped working" errors on screen, and i thought i could just upgrade back to 2.2.2 without breaking the kernel.
couldn't find a download of the latest firmware (but have since then) so i used pc suite 4 to update.
phone is back in 2.2.2 but root is gone and kernel is back how it was before.
tl;dr what i want to know is the difference between a rom and a kernel, and if it is possible to update the OS without changing the kernel, or root on 2.2 and then update to 2.2.2 without removing root so i can then install the milk_os kernel.
i have a copy of the latest update 2.2.2 from my provider which i can install with recovery if it will stop it overwriting kernel and/or removing root.
alternatively, cm7 is a 2.3.3 rom, is it worth just downgrading, rooting and flashing that? i assume that wont break my root
sorry for noobness, i just want to play angry birds without lag and im a compulsive fiddler/breaker.
PS also, if i go to 2.3 gingerbread am i correct in thinking my class2 microsd card will not work anymore on account of app2sd or whatever?
can someone please just tell me the best option for me, i have tried to google and read myself to find an answer but new to the scene and some things seem to be taken as understood and i don't get them at all.
thanks
Click to expand...
Click to collapse
a. kernal =/= rom
kernel is something that works beneth the operating system.. its like this
YOU -> Interface -> Operating System (ROM/Android/Linux/JVM) -> Kernel -> Hardware
and back.
I also assume LG's updater flashes both the rom and the kernel. so in simple terms, use Custom Rom to flash a new rom (void/CM7/etc) and use it. There is no trick way of the stuff ur explaining to happen.
b. Android 2.2.2 doesn't do jack ****. downgrade to 2.2 then upgrade to CM7 or whatever. class 2 sd cards SHOULD have a random unmount error. i think void might have fixed it; check plz. flashing cm7 should fix everything u explained, but don't expect much from the ROM; its in dev. FYI touchscreen fix is included in cm7
c. custom roms, including cm7 has root built in.
d. conclusion
i. use cm7 route -> flash custom recovery -> flash CM7 (tricky, be careful) -> touchscreen profit!
ii. use froyo rom route -> flash custom recovery -> flash rom of ur choice (void, megatron) -> flash touchscreen kernel -> reboot -> profit
e. press thanks if ur thankful. i would like some thanks lulz
cheers
There is a Kernel you can flash that helps fix the bug
http://forum.xda-developers.com/showthread.php?t=929941
thanks!!!
awesome, thanks heaps for that.
just one more thing, i assume the custom roms like cm7 and megatron/void all have root built in? or does the custom recovery do something to stop the root being removed when you reflash
once you root the phone, no matter what custom rom you use, it will still be "un-rooted".
Only when you use the kdz updater to put back original firmware, phone is no longer rooted.
thanks
awesome, thanks for that
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Joeyjr25 said:
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Click to expand...
Click to collapse
Start with getting back to stock using this guide. Check for ICS bootloaders too, you probably flashed them and you have to get stock ones back (careful, flashing bootloaders can cause hardbricking). Once you're back to stock and rooted, you shouldn't need to ever use PC Odin again.
Then use this guide for rooting/flashing.
One other note: when you tried to install CWM, it sounds like you loaded an update.zip onto your phone then tried to install it using stock recovery. Stock recovery won't let you install unsigned update.zips, which is why that method for getting CWM on your phone will never work (hence the authentication error and installation abort). For our phone, CWM is only included in custom kernels, that's the only way to get it on there, and don't even think about updating or changing it via other means. Just flash a custom kernel, it'll include CWM, use it until you want to switch kernels.
Hit my thanks button, I was really nice this time. And post in Q/A next time as well.
EDIT: Skip the second guide if all you want is stock. You should be able to update OTA after following the first guide. Though even if stock is what you want, I highly recommend flashing a custom GB kernel because a) they're more stable and faster and b) you'll have CWM in case you need it.
You started off mentioning about "leak ics" which I have absolutely zero experience.
My suggestion:
1. Try to get it back to stock. Make sure it works correctly.
2. If hasn't rooted yet, do so.
3. Getting CMW into the device by flashing custom kernel.
4. From there, install any ICS ROM you want.