I have tried just about everything I can think of to get 2.2 on the streak and I finally got it on the device but can't get 3g or data to work as the phone seems to be locked in airplane mode or something and I can't get it out of that mode. I have even tried manually putting in the apn settings and those don't even get saved. I have downloaded the stock rom and recovery and flashed those and then went to 2.1 and then flashed steve's 2.2 version 1.6.1 and still nothing. Anyone have any ideas?
Got it! Everything is working as expected now!!
Related
I was running Eugene's R13 with stock kernel and JK6 modem and all was working fine for the past couple days. Tonight I turned on my wifi at home to download a program off gameloft and when i turned off WiFi to switch back to data, the data signal never came back. I checked the settings and data was enabled. I tried everything to get it back and nothing works. I restored my nandroid back to Samsung out of the box stock and did a factory reset and no data still. I then installed a bionix rom that worked well in the past, nothing. I installed the new Onyx 4.2 and flashed the new JK6 modem and that didnt work. I reflashed Euegene's R13 and that still no go.
Any ideas??
You sound like you are having the same issue as me, I was runing macnut r12, worked great. I upgraded to r13 and it was runing well until I rebooted the phone, then I had no cell network connectivity. I odined stock JFD and phone worked, I reflashed r12 and no dice, I went back to jfd it worked again. I flasged a cw jk6 and an odin jk6 and several modem fles and no dice. I am currently stuck at jfd. If you go in to about phone does it have unknown baseband? I have that now unless I am runing stock jfd
In the same boat here. Please help!
It's actually worse for me. I can't even make phone calls.
Use Odin to go back to JFD, you will be able to make calls / data. Unfortunatley I am stuck at JFD at the moment because no mater what I flash other than JFD, I have the unknown baseband issue. I tried Odin JK2 and JK6 also clockwork Macnut 12,13,JK6 roms, JK2 roms. I also tried using Odin to flash JK2,JK6,JFD baseband and no luck
I've never been able to install streakdroid on my dell streak due to this issue, and as this is the third time I've spent practically a whole day trying to do it and it still won't work, I figured it's time to ask for some help.
I'm running the stock 02 2.1 build 8105, and the streak is locked to o2. I tried to flash streakdroid using the guide which tells you how to upgrade from the 8105 build, although obviously I used the 1.9.0 zip to upgrade rather than the old one it links to. Everything else I followed to the letter.
Upgrading to stock o2 2.2 via the system update works fine, and the wifi is fine, but when I flash streakdroid, I can't turn on the wifi - it just says error. Wifi mac address is also unavailable, and even after factory resets, cache wipes, and practically everything you can think of it still won't work.
This is extremely frustrating as I'm sure I'm doing it right, and whenever I install streakdroid it's clear how much better it is. Sadly, I need wifi so have to keep flashing back to o2 2.2/2.1.
So, can anyone help me? Has anyone used the same route as me and can upload the exact files they used along with the steps?
thanks.
here's my problem:
when ever i leave phone to be in deepsleep mode,
i cam back to find it looking for GSM signal with no hope,restarting fixing the signal.
tried diffrent roms, CM7, MIUI,with all kind of kernels nothing works
phone condition is fine,did't drop it or hardware issues on it.
was working great for last 6 months, but after i flashed a ton of diffrent CM roms this starts to happen,
my thoughts:
could it be a NVdat.bin issue doing this?
if so, what i can do to let the phone re build fresh ones,
+ i have old backup of EFS folder.
can you share your thoughts please?
I had the same thing happened to me and my friend's phone in the last week. Both running the ported gingerbread roms. Had to Odin back and finally working. Not sure if it was the Rom or something. My phone says it shows a baseband of UVKB5 which is the correct modem.
Finally flashed back to froyo and had it working, now just reflashed a gingerbread rom and it's working again.
Dattack said:
I had the same thing happened to me and my friend's phone in the last week. Both running the ported gingerbread roms. Had to Odin back and finally working. Not sure if it was the Rom or something. My phone says it shows a baseband of UVKB5 which is the correct modem.
Finally flashed back to froyo and had it working, now just reflashed a gingerbread rom and it's working again.
Click to expand...
Click to collapse
will try this option today and give a feedback.
thank u
Edit:
odining back to JFD solved the problem.
ok, so i unlocked and rooted my rezound, everything was working 100%, then i start flashing diferent roms and it was conecting to wifi with no problems, however when i flashed ( or tried to flash ) a new kernel ( dont remember which one ) wifi stoped working for me, it scans but doesnt pick up any network. i went back to stock kernel and nothing, re-locked device and installed verizon factory Ruu for the rezound and Wifi still doesnt work. Im going crazy here please help, maybe im flashing the kernel wrong but re-locking and restoring to factory Ruu should have fixed it
I was also having the same issue and tried reinstalling kernals and nandroids. I was loading the kernal through Amon Ra interface directly and no matter what I did I still had issues. Sooo, I revised my recovery process and found that dummy me can't read instruction correctly. The issue was resolved after I did a factory reset on the rom (Ineffablis v1.0) then I followed the instructions for installing the kernal (I'm using the SmartassV2 kernal from dsb9938; flash from SD, then flashmethis file and finally through HBOOT, it's a process ok?), rebooted and I was able to get WiFi working again. I've had this issue whenever one of the additions I was trying did strange things to my phone and have sucessfully restored WiFi (about 10 times for this occurance). I've also had to do a hard reset (pulled the battery) and follow the process to get back to functioning. Hope this helps.
i locked the phone again, and ran the rezound stock Ruu and did factory reset, still not picking up any networks. the wifi doesnt give and error it scans and everything, but for some reason it just doesnt pickup any networks
If you read the complete directions when flashing a rom... They state you will need to flash the wifi module after a fresh install. So just flash the kernel over again and you will have wifi working.
Thanks a lot, finally got it working
Sent from my HTC REZOUND using xda premium
I'm having the same problem where my rezound won't find any networks. My bluetooth won't turn on either. How were you able to fix it?
thanks,
ron
Edit
Hi all
I dont know why / how but my cell radio suddenly went off and wont turn back on.
I am rooted BL unlocked on Nottachtrix 1.3.1 ROM.
I am also SIM unlocked and I live in India. I have the AT&T atrix.
What might have caused the issue
I was messing around in *#*#4636#*#* with the radio band.
I had this signal boosting app which I use but cant find it on the market to link it now. I 've been using this app for a while so dont know why it would mess up now.
I am not sure if these are what caused the issue but just letting u know
Things I have done so far
Battery pull
Different sim card / different network
I tried flashing the ROM again with full wipe but still no luck
Flashed CM7 Ba2tf and the problem persists.. can I rule out that it is software related?
Everything else is working fine.
I am out of ideas and help is very much appreciated.
Thanks
SOLUTION
The Easiest Fix for this issue is Flashing the right baseband in CWM recovery.
The radio is flashed separately from the Android os. Try a new baseband. However be sure to get the right one for your phone.
M
Sent from my MB860 using xda app-developers app
Issue solved. I 'll detail what I did so it can help others.
Yes. Selecting the USA Band is what caused the issue.
I dint know that basebands could be flashed on Atrix ROMs. I wish I 've known it sooner. Would 've saved me a lot of trouble. Anyway I went with the SBF method.
I had the 4.5.91 earlier but I went with 4.5.141 to be safe.
Everything went smooth but at the end RSD lite said "Please manually reboot this phone" and the phone went into a boot loop at the M logo. I looked around and after a while found that a Wipe fixes it in stock recovery.
1. Disconnected the phone
2. Pulled out the battery.
3. Rebooted and went into stock recovery.
4. Wiped data and rebooted.
5. Got to home screen fine. Rebooted once again to make sure everything is fine.
Then inserted sim card and I had a signal. Everthing is working great.
Bro i have solution.... Btw... You must have flashed the wrong rom.... Kindly download nd install other one ..or use custom cm14 ROM or miui for best experience..