Hello,
i had some problem.
my system vista 32 bit
telefon tg01 complet dead no funktion no backlight nothing goes with short pin........
my first problem is, when install the tg downloader there is no new driver in my usb system
what must i do first to install the drivers, ?
must i only install the tg downloader as admin or must i install the driver from the win 32 ???
please help my ...
thanks alot
Pascal
pascalo69 said:
Hello,
i had some problem.
my system vista 32 bit
telefon tg01 complet dead no funktion no backlight nothing goes with short pin........
my first problem is, when install the tg downloader there is no new driver in my usb system
what must i do first to install the drivers, ?
must i only install the tg downloader as admin or must i install the driver from the win 32 ???
please help my ...
thanks alot
Pascal
Click to expand...
Click to collapse
1. install the tg downloader
2. install the driver from the win 32
3. TGTool in same Folder
... from my tipps&tricks
2. LCD Display stay black (or verry dim black light) and when plug it in to charge No red LED flash, not possible to RESET OR Hard RESET
= unbrick method= TG Downloader over PC connection with user manual in german (pls translate with google translator for other language) contains: TG01 Downloader, TG01 Driver, TGTool
and here the needed bin file: tg01.bin file (unzip)
hy
y make evrithing ,led blink all colors but my tg1 still dead ,y gat a error ,, failed to create the directory "
pls help
sorry for bad eng.
you can also try
Power On + Hold Vol Up + Hold Camera : Master Clear / Factory Settings
or
Power On + Hold Vol Down : Start FW Flash
y try all ,led green vibrate and nathing als
alin69 said:
y try all ,led green vibrate and nathing als
Click to expand...
Click to collapse
http://www.megaupload.com/?d=0MDRFUHP ok. if your flash procedure start and if your led flashes in different colors, that is good.
here the needed bin file: tg01.bin file unzip it before. it has to succes!
y du evrithing bat the end dont restart still dead , y turn on and just gren led end vibrate , y put tu the charging red led blink bat the batery dont charg
my eng is bad
tg downloader eror: failed to create directory
or u can short pin1&pin3, when u put the "bin" file to the "prg" directory.
kylecug said:
or u can short pin1&pin3, when u put the "bin" file to the "prg" directory.
Click to expand...
Click to collapse
y try bat nathing
alin69 said:
y try bat nathing
Click to expand...
Click to collapse
hllo alin, my english is also not very well. i use offten to tanslate http://translate.google.com
now to your problem: yor tg01 can NOT realive over tg downloader!
i write in few postes above: LCD Display stay black (or verry dim black light) and when plug it in to charge No red LED flash, not possible to RESET OR Hard RESET= on your tg01 you have the green led after power on and the red led after plug-in to charge. that what i meane with flickering led in ALL different colors is, when you load the .bin file (led flickering in white, blue, red and green)
to load the .bin file, you pc has to detect your tg01 over the usb driver.
you get the tg downloader eror: failed to create directory= your pc can not detect your tg01- it load not the usb drivers. this you can try 1.000 x but- it will not!
i thin your tg01 is not really bricked- i think you have to do:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED go RED
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
mirolg said:
hllo alin, my english is also not very well. i use offten to tanslate http://translate.google.com
now to your problem: yor tg01 can NOT realive over tg downloader!
i write in few postes above: LCD Display stay black (or verry dim black light) and when plug it in to charge No red LED flash, not possible to RESET OR Hard RESET= on your tg01 you have the green led after power on and the red led after plug-in to charge. that what i meane with flickering led in ALL different colors is, when you load the .bin file (led flickering in white, blue, red and green)
to load the .bin file, you pc has to detect your tg01 over the usb driver.
you get the tg downloader eror: failed to create directory= your pc can not detect your tg01- it load not the usb drivers. this you can try 1.000 x but- it will not!
i thin your tg01 is not really bricked- i think you have to do:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED go RED
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
Click to expand...
Click to collapse
my pc detect toshiba serial ,make all step on tg dowloader bat nathing
y try second step of you batt oen y put tg to charging red led off ,nathing,zipp,,
a 1 day agoo y puthem to charg and red led blinck bat today no red led
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED go RED
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn[/QUOTE]
y try this metod step by step batt still nathing ,dead
tg01 bricked
help pls.
alin69 said:
help pls.
Click to expand...
Click to collapse
please describe, how you bricked your device. what you have doing, how ROM before and how ROM flashed.
pls make a screenshot from your pc display after connect tg01 over usb And a screenshot with the error message.
i´m willing to help you, cheers, MIRO
tg01 bricked
y used sdll+ with .tsw on brokent microsd 32gb, boot start fine batt wen restart from boot failed
y use custom room bat y dont remember exactly,y duet 20-30 taimes ok bat naw ........
y think the problem was a 32 gb microsd with problem y uset last taime
order- 3,1,2
alin69 said:
y used sdll+ with .tsw on brokent microsd 32gb, boot start fine batt wen restart from boot failed
y use custom room bat y dont remember exactly,y duet 20-30 taimes ok bat naw ........
y think the problem was a 32 gb microsd with problem y uset last taime
Click to expand...
Click to collapse
ok. thank you for the screenshots! i see and belive, your tg01 is really brocken (if not- your pc will not detect usb connection). the only way to brick your device if you put of your battery on a acive ROM flash process.
hmm, ok i see you load my tg01.bin and after succes download- you get the " directory ... error" i thin you has also try without the sd card inside, too? if not try this- but i think your internal flash memory (NAND) is defect.
maybe helps http://www.jtagbox.com/jtag-news/riff-jtag-toshiba-tsunagi-tg01-unbrickefs-repairunlock-supported/
mirolg said:
ok. thank you for the screenshots! i see and belive, your tg01 is really brocken (if not- your pc will not detect usb connection). the only way to brick your device if you put of your battery on a acive ROM flash process.
hmm, ok i see you load my tg01.bin and after succes download- you get the " directory ... error" i thin you has also try without the sd card inside, too? if not try this- but i think your internal flash memory (NAND) is defect.
maybe helps http://www.jtagbox.com/jtag-news/riff-jtag-toshiba-tsunagi-tg01-unbrickefs-repairunlock-supported/
Click to expand...
Click to collapse
y try with sd in, batt pc dont detect my tg just withaut sd
linck eror
you think any hope for my tg01?
thank you for all
in the tg dowloader you now the sethings for naad data?
with tg conected naad data is the same
Hi. I do not quite understand.
In attached screenshots we have from one side "downloading complete" and from the other hand "error ........". What is event sequence ?
mirolg , You are very familiar with tgdownloader, is it possible to have such events ?
I thought that downloading is either ok or not. Does tgdowloader do something after download ? ( It would explain this error message ) . Why our colleague need SD card for downloading ?!
Regards
fxdjacentyfxd
Related
I'm sorry for the typical question and thread!I did everything but without result,
for this reason i've decided to make a post
so as i said on title i'm stuck on boot screen,to let you understand
the screen with 4 colors,red,green,blue,white.Now here the point,it seems that i can't resume my phone
from that screen!I've tried as is written here "format a microSD card with FAT32
extract the .NBH file from the rom image you like
rename the .NBH to HERMIMG.NBH and copy it to your microSD card
put microSD card in phone and start it in bootloader (hold Ok button on left side and POWER button at same time and stick with stylus in RESET on bottom)
confirm flashing on screen" but it was useless,nothing happend,when i push the left button ok
and at the same time power and soft reset,the screen change color become gray and appear a write "Loading...."and some numbers above 00068002
to return invain at the beginning screen.I don't know what i wrong and if is there another way to resume it,obviously my activesync don't work.
Here others informations if it can be useful for someone about my boot screen
Red stripe there's written: HERM200 I PL-1.01
HERM200 SPL-1.11
White stripe: Serial
does anyone had my same problem???
Please help me i really need my phone because my work
Thanks a lot
Try flashing from the computer - just start with the phone in Bootloader mode, select force using SSPL and flash whatever ROM you like. Give it a try.
Thanks for the answer!But i've already tried that way without success,maybe bcause there's not connection with the activesync,could be possible?In fact when i try appear an error wich says
ERROR [260] : UPDATE ERROR
THE UPDATE Utility cannot connect to your PDA Phone.Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone.
Check the following:
1.The PDA Phone is connected to the USB cradle/cable.
2.The USB cradle/cable is connected to the PC.
Now how can i fix this problem????
Thanks for ur collaboration!!!
Pleaaaaaaaaaaase HEEEEEEEEEEEEELLLLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPP
I have exactly the same problem !!!
Damn!We gotta find a solution!Hey if you can fix our problem please let me know!And naturally the same for me.Let's keep in touch!
White stripe: Serial
Click to expand...
Click to collapse
This should switch to USB once you plug it in...
Give us a little more info now please:
* what file are you trying to flash
* what RUU are you using
* have you tried connecting with mtty (if you get in, try task 28)
* have you trried hard reset
Just to be clear on my previous post...
1. Put phone in BL mode
2. NOW plug phone into computer (that order is important)
*Phone should now say USB*
3. Launch CustomRUU (should not be a retail RUU)
4. Flash
Dear todd_jg,
first of all thanks to be interesting about my problem,
second yes my phone switch to serial in usb mode,
-regarding the RUU i don't have any idea about it!
-Can u post the right RUU that i should use please?
-Never tryed mtty
-Yes i've tried with hard reset but without result,it send me back to the boot screen
-I did exactly as you said but it was invain!
Use the RUU file from THIS THREAD
Get the nbh file
Drop it into a folder with the RUU
Launch the RUU
Whichever nbh is ok???
tetsuokaneda said:
Whichever nbh is ok???
Click to expand...
Click to collapse
Yes, but if you continue to have problems, you may wish to try a different one or at least post a link where you found it...
I got it!I'm trying right now!I'll let u know immediately!Thanx
Fu.. nothing to do....
here what it said
ERROR [260] : UPDATE ERROR
THE UPDATE Utility cannot connect to your PDA Phone.Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone.
I think that the problem is the connection between the Cpu and the Pda.
tetsuokaneda said:
Fu.. nothing to do....
here what it said
ERROR [260] : UPDATE ERROR
THE UPDATE Utility cannot connect to your PDA Phone.Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone.
I think that the problem is the connection between the Cpu and the Pda.
Click to expand...
Click to collapse
Alright - lets try a task 28 with mtty
You will need to find mtty first (should be a link in the wiki or use search).
The tricky part is getting mtty to see the USB connection... I get it by doing the following
1. With the phone in BL mode and mtty closed, plug it in to the USB
2. Using ActiveSync, manuallyt tell it to check for connected devices (this will get it to start polling the ports)
3. While ActiveSync is still polling the ports, open mtty
4. Where it says connect using... or port... or something like that, you should find USB001 or something like that - something with USB in the name. If you don't see it - try steps 1-3 a few times.
Once you have seen the port, you can connect to the phone. The wiki has some instructions for getting to the USB prompt in mtty. Once you are there you want to issue the task 28. See if that helps.
Here is the link to the wiki - a link to mtty is there and some directions. Good luck.
Ok here what i obtained with mtty
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 14
Can't find OS in flash!!!
Storage format success
and now?
tetsuokaneda said:
Ok here what i obtained with mtty
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 14
Can't find OS in flash!!!
Storage format success
and now?
Click to expand...
Click to collapse
Well... let's see...
SD Card - No
PC - different BLs and RUUs - No
mtty - No
Manual BL mode - No
Almost stumped here... last resort: KITL + PLatform Builder
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
OR...
Flash an OS.nb file with mtty (READ THESE DIRECTIONS CAREFULLY)
Daaaamn i think will be a long night
I hope if is gonna work
Thanks todd_jg
i'll keep u posted
hey guys plzzzzzzzzzzzzzz help me with this i`m in deep
i have WM6.5
my radio version is 1.65.28.25
i have no sound at all but i can make a phone call the front speaker works (the one u put overur ear when u make a call) but the back one doesnt work at all !
no 2nd camera
when i open the slide the screen starts to respond wierldy :S
i tried to follow this
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!) (run it where plzz? using the phone file exploerer or dirctly from the pc)
5. after a few seconds "USB" appears on the display(is it the one with the tri clolr mood?)
6. unplug and replug the usb cable (when i do it nothing happens :S it stucks at the tri color mood)
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki( i have done it without doing the sspl 1.16 and it worked :S is that correct to do???)
9. after installing the hardspl you can flash any rom (rom cook project
Hi!
I've a HTC 7 Mozart that after bad unlock, shows "Enter USB Host Mode.." in the screen. It doesn't have SD Slot, so I can't put a goldcard for repairing it. It's from Orange Spain, and there aren't any roms yet. How can I recover it?
Best Regards,
NeTRaW said:
Hi!
I've a HTC 7 Mozart that after bad unlock, shows "Enter USB Host Mode.." in the screen. It doesn't have SD Slot, so I can't put a goldcard for repairing it. It's from Orange Spain, and there aren't any roms yet. How can I recover it?
Best Regards,
Click to expand...
Click to collapse
what are you trying to unlock, have you tried the master reset, whiles the phone is off, hold volume up/down then press the power and a menu should show up for master reset.
hi This problem can be solved only by the xtc clip
zozo -->> http://www.youtube.com/watch?v=QaYXxXgqDtU
Solution with Gold Card and Y Cabel.
NeTRaW said:
Hi!
I've a HTC 7 Mozart that after bad unlock, shows "Enter USB Host Mode.." in the screen. It doesn't have SD Slot, so I can't put a goldcard for repairing it. It's from Orange Spain, and there aren't any roms yet. How can I recover it?
Best Regards,
Click to expand...
Click to collapse
Hi Brother,
Here is solution.
Windows Phone 7 handsets stuck in USB Host Mode
This looks like it's common to all WP7 phones, not just the Mozart but it's particularly annoying here because you need to feed the Sim Card/Flex adapter under the battery, over the battery retaining clip and under the battery cover. Very fiddly. Very easy to accidentally press the power button.
IF YOU PRESS THE POWER BUTTON INSTEAD OF VOL DOWN + CAMERA YOU WILL SOFT BRICK THE PHONE. IT WILL BE STUCK IN USB HOST MODE.
Fortunately to fix the phone you just need the "special cable" with MicroSD reader from the WP7 upgrade kit, the Gold Card you make in step A and the firmware for the phone you're working on.
1.Take the firmware .exe and extract the largest file (Ruu_signed.nbh or something similar)
2.Rename it using the same 4 letter naming convention that the DIAG file already on the goldcard with a IMG suffix e.g. MOZAIMG.nbh
3.Copy it to the MicroSD. You can use the XTC Clip as a card reader. This is the slowest part of the procedure.
4.Delete the DIAG file
5.Put the MicroSD card in the "special cable" and plug it into the phone without pressing any particular buttons. This will automatically reflash the phone with the possible bonus of debranding the phone.
6.Once the phone has booted up, you can proceed with trying to unlock it again.
Hope this helps.
Same problem encountered on the HD7: http://forums.phone-tools.cn/showthr...-mode-solution
Similar walkthrough for debranding: http://forum.xda-developers.com/showthread.php?t=892657
If its help you then thanks to orginal Master.
Thanks
Br, Raja
NeTRaW said:
Hi!
I've a HTC 7 Mozart that after bad unlock, shows "Enter USB Host Mode.." in the screen. It doesn't have SD Slot, so I can't put a goldcard for repairing it. It's from Orange Spain, and there aren't any roms yet. How can I recover it?
Best Regards,
Click to expand...
Click to collapse
Dear Members...
After a long time i got solution for this problem. Yesterday i resolved one mozart which shows Enter USB Host Mode without using Y-Cable procedure.
This may work on many mozart, which has this problem with bootloader 5.12.2250 & dont have rom for their region. U can try this, before using Y-Cable procedure.
The solution is...
1. Download "WP7_Update_Cab_Sender.zip", from this forum & extract it.
2. Press Camera button & Power On the mozart. Dont release Camera button until the mozart shows computer connectivity symbol in the
display. Then release pressing the camera button & connect the moazrt to pc.
3. Now goto the extracted folder to this "WP7_Update_Cab_Sender\tools\x86" folder via MS-DOS prompt or copy cmd.exe to this folder and
open it. So that u will get, direct location of that path in command prompt.
4. In Command Prompt type "UpdateWP.exe /list". This shows the connected devices details in the screen.
5. Then type"UpdateWP.exe /reset". This will try to reset the mozart & restarts it to normal condition. Wait for few minutes
(not more than 5-10 mins) to get in to normal stage.
That's all...
If the solution doesn't work you, then dont blame me... & you can try with Y-Cable procedure...
It works dude thanks i shoud search for commands for ms dos
USB Host Mode
Was trying the same thing but no luck.
After several months, I realized my notebook's USB ports aren't that good anymore.
What I did is connect it to another PC (Win7 Home Premium) and download Zune (I installed other dependencies first like Windows Mobile Drivers for Vista). Get another cable if you have to. I connected it to the PC using a 3-headed USB cable (not a Y-cable since I don't have it).
Wait for several minutes, and the phone just shut itself off and on again with the HTC logo.
Instead of going to the USB mode, it goes to the....well, setup page after you factory reset it.
That's how I fixed my paperweight just today.
Must be Santa giving an early present.
+ Que PPC said:
It works dude thanks i shoud search for commands for ms dos
Click to expand...
Click to collapse
Sent from my SM-N900T using XDA Premium HD app
Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
otd leagoo lead1 sm619b v0.9.2_S1202
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?
try different (and newer) sp flashtool:
SP_Flash_Tool_v5.1348.00
https://drive.google.com/file/d/0BwtGwuP0GdfBZzh3a2NCWVZ3RVU/edit?pli=1
r0c0 said:
try different (and newer) sp flashtool:
SP_Flash_Tool_v5.1348.00
Click to expand...
Click to collapse
i will try but now i got another problem so i cant turn off my phone with usb cable plug in , i can see batery logo or i just turn it on * unlycky me but for half sec when phone was plug in with meadiatek preloader i saw it working for 1 secunde u can see on my printscreen
you need to plug in a usb cable and really fast press download button in flash tool, this helps with BROM errors. otherwise you could try googling the error or just contact leagoo.
r0c0 said:
you need to plug in a usb cable and really fast press download button in flash tool, this helps with BROM errors. otherwise you could try googling the error or just contact leagoo.
Click to expand...
Click to collapse
Yeah i try today and after some time i did it , i use official rom from web site , all file load dormat etc , then green cirle "OK" i unplug phone from usb and turn it on but i saw that logo "LEAGOO" was flickring and then top half display of mobile was Yellow and bottom was white/black thats maybe worst then before i emailing with seller too but i dont think he could help me
and after that with another try i waned use different rom i got this pic down .. so again im on connect disconect phone
after 10+ try i connect it again and trying another rom hope this will work :silly:
1st edit: add img after ok flash
2nd edit k phone after turn on is yellow at top and at bottom white black
should i use download only or try format all+ download
3th: i upload img of phone after start so u can see
its to bad that ppl from etotalk dont know how to deal with it too
i got the same problem
i was flashing lead 1 firmware on lead 1i
lead 1i is the latest so download right firmware..
I was using miui pro and I flash Miui multi pro via twrp.
After complete installed rom reboot my phone.
but it is not open.
I try to power on but can't.
Try to open recovery mod via power +volume button but can't.
It's like phone power Off and can't power on.
Pls help me.
Try to flash via Xiaomi tools.
It find com port when I select location of flash files and click flash it failed after 40 second. Error flashing.
Totally no response of my phone when I press power button.
I just installed miui multi pro rom via red wolf.
And it's finished install.
I press reboot.
And the problem create.
Why and what the solution.
your phone is dead,just buy new one and problem can fixed,thanks
Is your booting in bootloader if yes flash fastboot rom
mohsinreadymoney said:
Is your booting in bootloader if yes flash fastboot rom
Click to expand...
Click to collapse
No
Phone power Off and can't go to fastboot mod
mohsinreadymoney said:
Is your booting in bootloader if yes flash fastboot rom
Click to expand...
Click to collapse
When I connect charger or USB with pc just notification light beep on/off nothing show on display.
Maybe your bettery dead. Plug it in charging for 2 hours, otherwise replace the battery.
Bro... Mera v aysa ho chuka hai .. agar charger or data cable plug in krne pr red light blink krta h to.. sbse phle back cover remove or battry ki wire ko disconnect kro or PC se connect kro .. fir mi flash tool se flash kro. Automatic EDL me aa jata h phone .. you can try this method..
Mizanur0001 said:
When I connect charger or USB with pc just notification light beep on/off nothing show on display.
Click to expand...
Click to collapse
1. Is it red light beeping ON/OFF?
2. What does the COM port say after connecting the phone to the PC in device manager? HS-USB diagnostics 900E or Downloader?
3. In either way install the Qualcomm HS-USB Downloader driver if not installed in your PC
4. Get ready to pull off the back cover watching youtube, it's not so difficult, disconnect the battery for 20s. Then reconnect. Next connect the cable to the PC to check if it connects in Download mode or not