Related
Basically, my phone USB connector, is for some reason not recognizing anything being plugged into it. I have tried a different cable and i get the same response :/ NOTHING!
Plug into the computer - Nothing
Plug into the wall - Nothing.
I need to flash my phone back to stock, but the only method i can think of is via USB, Over the Air updates are canceled out via the current software I have on my phone. So is their any other possible way ?
Thanks
I suffer from exactly your same issue.. sad 'cause i now have a very expensive brick .. Already covered the topic in my thread, but there is no evident resolution...
I suspect the USB circuit and/or port is defective , or poorly implemented, and breaks easily...
duffy1807 said:
Basically, my phone USB connector, is for some reason not recognizing anything being plugged into it. I have tried a different cable and i get the same response :/ NOTHING!
Plug into the computer - Nothing
Plug into the wall - Nothing.
I need to flash my phone back to stock, but the only method i can think of is via USB, Over the Air updates are canceled out via the current software I have on my phone. So is their any other possible way ?
Thanks
Click to expand...
Click to collapse
I would go in to your service provider, and hopefully you get an idiot who doesn't realise you were trying to root your Xperia, and they might replace it for you.
Thing thing is, it was going to be sent back for a repair. When the tech guys look at my firmware , they will realise I have rooted my phone, i was hoping to Un-root my phone and then send it back .. Or will this not matter?
Is their not a way to flash my phone back to normal, via the SD-Card?? somthing must be possible if Over Air is Possible..
Any Idea's anybody please?? thanks
duffy1807 said:
Thing thing is, it was going to be sent back for a repair. When the tech guys look at my firmware , they will realise I have rooted my phone, i was hoping to Un-root my phone and then send it back .. Or will this not matter?
Is their not a way to flash my phone back to normal, via the SD-Card?? somthing must be possible if Over Air is Possible..
Any Idea's anybody please?? thanks
Click to expand...
Click to collapse
I don't know what it would exactly do, but in the Second card
&. Phone storage section of the settings app, there's a factory data reset button, try that.
Keegan_P said:
I don't know what it would exactly do, but in the Second card
&. Phone storage section of the settings app, there's a factory data reset button, try that.
Click to expand...
Click to collapse
Hey mate, ive sorted it out i phoned up the Network Operater, and explained I wasnt a satisfied customer, because Ive had the same problem once before (this time i sent it through phones4u with a 30 day wait before i had my phone back :/..... ) Nevertheless Orange currier are coming out tommorow between 6-10 with a new phone battery and charger. which i couldnt knock back (probs reconditioned) but nvm .
Will try and make my phone as clean as possible without any root settings. before take my phone away and probs fix & reflash the phone to factory settings anyway so i dont think it makes any odd's what i do now .
am quite surprised the woman on the phone offered me this type of service, as I got the phone from Phones 4 u, bet yet Orange are the company doing my replacement.
Funny quote from the phone call :-
"Are you sure you for the phone from us sir?"
"erm, yes"
"Ive never seen this message on the system before, its saying your not one of our customers"
"I must be one of your customer's otherwise you wouldnt have all my details"
"Yes thats right ill just ignore the message and send you the replacement"
is there still no solution to this because i need to ship mine back for service.
Have you tried adbwireless apk. Allows you to connect to your phone via adb over your wireless network. You maybe able to modify bin4ys flash tool and flash wirelessly?
Worth a try?
wingz85 said:
Have you tried adbwireless apk. Allows you to connect to your phone via adb over your wireless network. You maybe able to modify bin4ys flash tool and flash wirelessly?
Worth a try?
Click to expand...
Click to collapse
Hey why don't you try Zdzihu's recovery menu? You can flash some of the ROMS from Jerpelea without touching a computer... Of course you'll need to download the ROM straight to your device...
Sent from my X10i
I've got this same problem too. (appologies for multi posting, I did search first).
No response since the upgrade. I'll look into Zdzihu's recovery menu.
If anyone gets any news, please shout.
OK put Zdzihu recovery on and flashed to Jerpelea's lite rom without the need for a USB....... however the problem still stands! Plug in the wall charger and nothing..... plug in PC USB and .... NOTHING.
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
I have left it switched off to preserve the battery until a solution is found.
I remain hopeful!
Plz delete.
Sent from my X10i using XDA App
davidmit said:
OK put Zdzihu recovery on and flashed to Jerpelea's lite rom without the need for a USB....... however the problem still stands! Plug in the wall charger and nothing..... plug in PC USB and .... NOTHING.
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
I have left it switched off to preserve the battery until a solution is found.
I remain hopeful!
Click to expand...
Click to collapse
What usb cable are you using? Did you get one WITH the phone from a friend, did it come with another phone, or did you buy it from a store? I used to work at RadioShack and we had different usb cables for different phones. The connector may be the same, but the pin position in the cable can be different. A normal looking USB cable that would come with say, a motorola phone couldn't be used to charge a blackberry despite the connection being the same port type.
jimbo77 said:
Hey why don't you try Zdzihu's recovery menu? You can flash some of the ROMS from Jerpelea without touching a computer... Of course you'll need to download the ROM straight to your device...
Sent from my X10i
Click to expand...
Click to collapse
would it be possible to restore the stock rom?
i need to reflash for to send it in to service.
I had this problem.. Only solution that I found was to send it back to rogers
It was a hardware problem apparently...
shukla said:
I had this problem.. Only solution that I found was to send it back to rogers
It was a hardware problem apparently...
Click to expand...
Click to collapse
Did they fix it or give you a new one and were you rooted? I have the same problem with the broken usb but I rooted and stripped all the bloatware and now have no way to flash back to stock rom. I still have the Rogers rom but streamlined.
Does anyone know how to put stuff back on like Timescape. I have all the apks from this forum and installed all the timescape stuff but it doesn't show up in the app drawer. If I clean up the phone and send it back will they know it was rooted keeping in mind that it is still the stock Rogers rom just with less crap on it.
I think one solution, since you already have Zdzihu's recovery menu, will be to ask someone who is using Rogers to create a backup image and upload it some where. Then you can use the restore tool from recovery menu and you'll be set up with Roger's again. Unfortunately I cannot help you with this since I'm in Guatemala but probably someone else can... I hope you can fix it men.
Jim
Sent from my X10i
davidmit said:
I got this phone as a prototype before they were released, by a mate in the industry. So have no warrenty to send it back with. But I love the phone so any more ideas?
Click to expand...
Click to collapse
I'm guessing if you got it for free, it wouldn't be too painful to actually buy one off eBay...
Ok, yeah, it's a stupid suggestion, but I guess you get what you pay for...
jimbo77 said:
I think one solution, since you already have Zdzihu's recovery menu, will be to ask someone who is using Rogers to create a backup image and upload it some where. Then you can use the restore tool from recovery menu and you'll be set up with Roger's again. Unfortunately I cannot help you with this since I'm in Guatemala but probably someone else can... I hope you can fix it men.
Jim
Sent from my X10i
Click to expand...
Click to collapse
yea that would work but i bought mine factory unlocked and im sending it back to sony ericsson so i just need a generic firmware. i tried looking to see if any one did a backup of a stock firmware but no luck
Edit: nevermind. found generic rom here http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1 at the bottom. going to test now and see if it works.
Hello Guys!
My friend bought a SGS2 and he whanted to root it and to put MiUi on it. Now he unpluged it while it was in the Odin doing something with PIT...
It stopped and now he can't go anymore in the download mode and the phone remains black...
is that a full brick? is there any chance to run it again?
do you need more informations?
I looked throuth the threds but i couldnt find something like that...
i hope anyone can help
Will Samsung repair that with Warranty?
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
BlackRainX said:
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
Click to expand...
Click to collapse
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Oli28 said:
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Click to expand...
Click to collapse
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
achillies400 said:
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
Click to expand...
Click to collapse
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Oli28 said:
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Click to expand...
Click to collapse
It's not the most correct thing to do (actually, not at all, it was your friend's fault entirely, also voiding the warranty), but your friend can tell them that the device began to heat while charging, he unpluged it and it died, sometimes it happens...
As for the JTAG you asked on the other post, it's a physical connector inside the cellphone used to write the flash memory, it involves opening the device, pinning some terminals and programming via PC, it's pretty common on embedded devices to load the program for the first time.
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
pankajkundalia said:
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
Click to expand...
Click to collapse
Won't work if the PIT wasn't completed therefore leaving the device void of a bootloader, but it's worth the try, you have nothing to lose...
Wow, nice will try today... I will get the phone... would get a free Pizza if i would make it work again! thank you guys for your answers. I will tell you what happend...
is there a how ti for jtag? Could Be the solution...
Sent from my Desire HD RUNNY using XDA App
How to JTAG:
You had to solder stuff, it's safer to try warranty
Omega Frost said:
How to JTAG:
You had to solder stuff, it's safer to try warranty
Click to expand...
Click to collapse
Thank you!
suddenly this with the battery didnt worked so im gona send it to the warraty....
And when they dont repair it for free or less than 50 $ I have to send it to the JTAG..
thank you guys for all your support
Afaik u never supposed 2 use pit options in odin for gs2 otherwise u end up with a brick anyway regardless if u remove the cable or not. perhaps read more and be more careful if u ever decide 2 flash again. i would not be happy with that friend lol.
Sent from my GT-I9100 using xda premium
so after hard bricking my device: http://forum.xda-developers.com/showthread.php?t=1731445 i got it into some kind of download mode. i also managed qpst to see my phone but i dont know how to use that. not sure if fastboot would recognize the phone in that download mode. i just wanted to know if there was a way to pull the stuff i had in the internal sd card like adb pull but adb wont see the phone. tmobile told me to go tomorrow so they can exchange it for another one but before i bricked it i copied some of the pics and vids from the camera 2 times using root explorer. the first time i didnt get all of them and the second time they all say they they were corrupted.
fcortes626 said:
so after hard bricking my device: http://forum.xda-developers.com/showthread.php?t=1731445 i got it into some kind of download mode. i also managed qpst to see my phone but i dont know how to use that. not sure if fastboot would recognize the phone in that download mode. i just wanted to know if there was a way to pull the stuff i had in the internal sd card like adb pull but adb wont see the phone. tmobile told me to go tomorrow so they can exchange it for another one but before i bricked it i copied some of the pics and vids from the camera 2 times using root explorer. the first time i didnt get all of them and the second time they all say they they were corrupted.
Click to expand...
Click to collapse
How were you able to get the phone on??Im in the same boat!Help me power on my phone please. Can you also link me to that driver you used?
taygutta said:
How were you able to get the phone on??Im in the same boat!Help me power on my phone please. Can you also link me to that driver you used?
Click to expand...
Click to collapse
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
fcortes626 said:
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Click to expand...
Click to collapse
Ok I went to best buy and im waiting on a new one BUT I really need the data off the bricked phone. Where can I find qpst? Does it see your phone when you hook it up?
What did you guys flash?
bizdady said:
What did you guys flash?
Click to expand...
Click to collapse
i was stupid enought to try and flash cm9 fromthe international version. i just changed the build prop and the boot.img lol :silly:
The omega rom.. anyone No how to recover data from a dead phone?
taygutta said:
Ok I went to best buy and im waiting on a new one BUT I really need the data off the bricked phone. Where can I find qpst? Does it see your phone when you hook it up?
Click to expand...
Click to collapse
search it on google. its free but its not easy to use. if you dont nkow what you are doing yo could even make it worse. some one with a working phone needs sto get some hex files and stuff.
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
bizdady said:
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
Click to expand...
Click to collapse
No nothing works. Completely dead. Ima try using a jig
bizdady said:
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
Click to expand...
Click to collapse
nope. no download mode and no recovery.
taygutta said:
No nothing works. Completely dead. Ima try using a jig
Click to expand...
Click to collapse
i have read the jig wont work on devices that show a blank screen.you can try it tho. worth a try. i was going to try it but by the time the jig gets to me id rather just go tomorrow and hope tmobile actually does exchange it.
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Hunt3r.j2 said:
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Click to expand...
Click to collapse
I think I have the Qualcomm tool but I have no idea how to use them.
Ill look into this JTAG.
I just want the data off the phone.... thats all
taygutta said:
I think I have the Qualcomm tool but I have no idea how to use them.
Ill look into this JTAG.
I just want the data off the phone.... thats all
Click to expand...
Click to collapse
Hunt3r.j2 said:
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Click to expand...
Click to collapse
yup now i learned my lesson. the qualcom tool is the qpst i was talking about. but you need the files to flash to it. i think your files are lost bro. unless you send it to samsung so they can fix it. i dont think if they flash it will delete your files since they wont flash to the sd card partition. but then again im not sure if they will notice if you were rooted. next time im saving all my stuff into my external sd
Yea, now I just await the call from Bestbuy about getting more in. My JIG comes in tomorrow so we will see.
Not surprisingly to see people who ruin there device and want to exchange it for another. Of course even though it was there own fault for ruining it they shouldn't have to pay for the replacement.
Makes perfect sense for companies and carriers not to support rooting/flashing. Its bad enough already.
taygutta said:
Yea, now I just await the call from Bestbuy about getting more in. My JIG comes in tomorrow so we will see.
Click to expand...
Click to collapse
you could of also made your own lol
fcortes626 said:
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Click to expand...
Click to collapse
That is the reason Motorola locked their bootloaders, and others have raised insurance premiums. Please don't lie. Its insurance fraud first of all. If you ruined your device by flashing non-stock ROM's and such its time to man up, and dish out the money for a new phone. Don't make other's pay for your mistakes/missfortune. Do some more research on the other method of flashing and see if you can fix it. I wish you luck.
Sent from my DROIDX
fcortes626 said:
you could of also made your own lol
Click to expand...
Click to collapse
Ha! I tried that.... fail!!!!! I cant figure out which pins are 4 and 5.
Sniper_5 said:
That is the reason Motorola locked their bootloaders, and others have raised insurance premiums. Please don't lie. Its insurance fraud first of all. If you ruined your device by flashing non-stock ROM's and such its time to man up, and dish out the money for a new phone. Don't make other's pay for your mistakes/missfortune. Do some more research on the other method of flashing and see if you can fix it. I wish you luck.
Sent from my DROIDX
Click to expand...
Click to collapse
that was not helpful:crying: and i dint lie. i told the truth. i said "it wont turn on" and they didnt ask why. and i guess you dont read much. its hard bricked meaning you cant recover it unless you have the software samsung uses. so stop trolling my thread bro. read and you will notice i have tried to recover it.
taygutta said:
Ha! I tried that.... fail!!!!! I cant figure out which pins are 4 and 5.
Click to expand...
Click to collapse
me too lol
I tried rooted my next book premium 8 and then it give me a error message said couldn't find the picture then turned off i charge it the try turned it on and nothing it wont turn on also i tried rest ,power+vol nothing happen it drive me crazy so pleeeeeeeeeeeeeease
what Should i do ? :crying: :crying: :crying:
wapp said:
I tried rooted my next book premium 8 and then it give me a error message said couldn't find the picture then turned off i charge it the try turned it on and nothing it wont turn on also i tried rest ,power+vol nothing happen it drive me crazy so pleeeeeeeeeeeeeease
what Should i do ? :crying: :crying: :crying:
Click to expand...
Click to collapse
First off try doing a battery pull and seeing if turns on after you've done that. Also what guide did you follow to try and root your device because if you show me what guide you tried using I might be able to figure out what you did wrong.
thank you shimp208
i tried doing a battery pull but nothing change.
about the
what guide did you follow to try and root your device because if you show me what guide you tried using I might be able to figure out what you did wrong.
Click to expand...
Click to collapse
this is the link i get the guide from i hope you can find a way to help me after looking at it
http://forum.xda-developers.com/showthread.php?t=1374742
any Suggestions :crying:
Hey, I have the same problem, have you found a solution yet?
FrOz3n said:
Hey, I have the same problem, have you found a solution yet?
Click to expand...
Click to collapse
Just so I can try and keep the details of your problem straight just like wapp the rooting procedure didn't complete successfully and now the device doesn't power on at all?
shimp208 said:
Just so I can try and keep the details of your problem straight just like wapp the rooting procedure didn't complete successfully and now the device doesn't power on at all?
Click to expand...
Click to collapse
Exactly! I can't get it into flash mode too. All that works is the LED.. I connect the charger it does nothing. Tried connecting the usb, still no luck. Can't turn the tablet on. Can't get into recovery mod. Can't get into flash mode (the state I need to flash stock firmware with RKAndroidTool.exe)
FrOz3n said:
Exactly! I can't get it into flash mode too. All that works is the LED.. I connect the charger it does nothing. Tried connecting the usb, still no luck. Can't turn the tablet on. Can't get into recovery mod. Can't get into flash mode (the state I need to flash stock firmware with RKAndroidTool.exe)
Click to expand...
Click to collapse
If the LED still works that's at least a sign that the tablet isn't completely bricked. Have you installed the USB drivers for your tablet?
shimp208 said:
If the LED still works that's at least a sign that the tablet isn't completely bricked. Have you installed the USB drivers for your tablet?
Click to expand...
Click to collapse
Yes, successfully rooted before. But then I got to stock, and on the next root try i got that...
FrOz3n said:
Yes, successfully rooted before. But then I got to stock, and on the next root try i got that...
Click to expand...
Click to collapse
Unfortunately if you can't even get in to flash mode, then warranty may be your only option I'm afraid. No matter what you try driver wise, different computer, different usb port, you can't access flash mode?
shimp208 said:
Unfortunately if you can't even get in to flash mode, then warranty may be your only option I'm afraid. No matter what you try driver wise, different computer, different usb port, you can't access flash mode?
Click to expand...
Click to collapse
Yeah I tried on my 3 PCs and the laptop, can't get nothing...
FrOz3n said:
Yeah I tried on my 3 PCs and the laptop, can't get nothing...
Click to expand...
Click to collapse
The other option besides warranty would be to take it to a repair center and see what they can do.
shimp208 said:
The other option besides warranty would be to take it to a repair center and see what they can do.
Click to expand...
Click to collapse
Ok, thanks for the support, I'm gonna try with the warranty today I just can't accept that it's a brick... I have flashed my android phones over 200+ times with different kernels/ROMs etc... and none of them bricked ... But that's it... Can't get the tablet to start :S
Thanks again.
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
You can try connecting to your PC via Odin and try the unbrick method by some guy named qbking on youtube. Link below
https://www.youtube.com/watch?v=m8tg9AlfOQ8&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
captemo said:
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
Click to expand...
Click to collapse
it was for carrier rom i wanted to return it to stock , and yeah i hooked it to the wall still didnt get any power , but im gonna check out that QBking77's Video , Ill Let you guys know , Thanks
:fingers-crossed:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
rangercaptain said:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
Click to expand...
Click to collapse
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Good For You!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Glad you're not bricked! I was bricked a few months ago, yes the real hard brick paper weight dead no response brick, not what these other post about having bricked their phone. I downloaded and installed a Liquid smooth jelly rom, but the post linked to a s3 build.
As soon as my phone didnt turn I feared the worst. Confirmed and yes it was gone. I had to send it off to get J-tagged. It worked!
Cost me a pretty penny. Then the thread mod was like oops! I linked the wrong rom hope nobody installed and got brick, just fixed it.
Ain't that some ****!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Read up my friend. It is all in the general section Super Everything, The All in one stock thread, and finally here. You are not unrooting insomuch as just flashing stock. Once you flash stock, that overwrites/deletes twrp/cwm and supersu.
Yes, as ^^^^ mentioned, you don't have to be concerned about unrooting.
There are debloated and bloated versions of stock Canadian roms in the development section. Another source for stock/carrier roms is www.samfirmware.com but you have to flash those with a pc using Odin software.