I can see the following things in my status:
Baseband Version: GAUSB1A130900-US
OEM Version: GAUSB1A131800
So am I on 309 or 318 ?
I don't remember what I got when I bought the streak but while trying to update to strekdroid, I messed up something and my phone was inoperable. I then restored it using some files from Dell, with stock loader.
Now I am unsure of what is my current status.
Even after the performance pack, I get qudrant scores of the likes of 1400. People get like 2K which makes me think that I am still on unoptimized stuff.
Suggestions ? Perspectives ?
65 views and no reply? ??
Somebody please let me know if I am on 309 or 318.
vasishta.sushant said:
I can see the following things in my status:
Baseband Version: GAUSB1A130900-US
OEM Version: GAUSB1A131800
So am I on 309 or 318 ?
I don't remember what I got when I bought the streak but while trying to update to strekdroid, I messed up something and my phone was inoperable. I then restored it using some files from Dell, with stock loader.
Now I am unsure of what is my current status.
Even after the performance pack, I get qudrant scores of the likes of 1400. People get like 2K which makes me think that I am still on unoptimized stuff.
Suggestions ? Perspectives ?
Click to expand...
Click to collapse
I may be wrong but I think that means your rom is 318 and your modem is 309.
I believe the "modem" as I call it, is the amss.img file.
Ya I think you're right...
streakdroid.com
he has new amss.img for you
Related
So I'm admittedly stupid when it comes to most Android issues, but I can follow instructions pretty well and unfortunately my issue didn't have instructions.
I looked over some of the other 'Update failed' threads but they didn't fit my issue since they're somewhat old and provided no answers really.
I have a rooted Vibrant with the only other "mod" being the OneClickLagFix. I recently received the OTA update system message and decided to go ahead with it thinking the worst that'd happen is that I'd lose root and/or some data, but I had backed up with Titanium so I wasn't worried.
So the update ran itself, the phone rebooted and nothing has changed? My version still shows as 2.1-update1 and now under "Software Update" only gives me the message "No firmware". I'm pretty much stuck now, I thought the update was going to give me 2.2 and I'd be set, but I don't think it did anything at all? Has anyone else run into the same issues?
Model: SGH-T959
Firmware Version: 2.1-update1
Baseband Version: T959UVJFD
Kernel Version: 2.6.29
Build Number: ECLAIR
I'm not having any noticeable issues just yet but I was hoping someone could give me an idea of what may have happened and/or what I may be able to do to get the OTA update (or similar manual instructions).
Many thanks to anyone who gives any advice, you guys all really know your stuff with Android so hopefully someone can help!
Cheers
the OTA wasn't 2.2
just a bugfix version of 2.1 with mediahub enabled
It was a 2.1 service pack, here is an abbreviated list of what was changed, added, modified, etc...
http://ip208-100-42-21.static.xda-developers.com/showthread.php?p=8576782
The GPS fix was the most anticipated thing in this update to the 2.1 version. I knew T-Mobile should have put a Version # in their annoucement but they didn't and look what happened. You're not the first person to crawl out from under a rock and wonder why 2.2 wasn't installed / available.
Oh well color me blue.
I apologize for my lack of knowledge on the issue. Thanks for clearing that up for me guys.
Back to under my rock I go.
prodigymix said:
Oh well color me blue.
I apologize for my lack of knowledge on the issue. Thanks for clearing that up for me guys.
Back to under my rock I go.
Click to expand...
Click to collapse
i saw that you put down:
Model: SGH-T959
Firmware Version: 2.1-update1
Baseband Version: T959UVJFD
Kernel Version: 2.6.29
Build Number: ECLAIR
was this after the update?
Baseband version is suppose to be T959UVJ16
Build Number: ECLAIR.UVJ16
AFTER the update.
make sure you've updated.
Just FYI to the OP, I had the same issue when I tried the OTA. It went through the update process, it told me that the update had failed and rebooted into JFD. The update did not stick for whatever reason. I ended up ODINing the JI6. I am now running Bionix 1.9 and am loving it.
My opinion of JI6 was meh at best. The devs here definitely have improved my Vibrant experience and turned this phone into a phone I am proud to show off.
Hi guys,
I been waiting here in s.a for andriod update..... hmph useless basically, but i have been informed that if i flash my systems with the british generic it will work. thing being is, i got the very old gen build and everything.
heres my details.
Model :x10i
firmware: 1.6
baseband : 1.0.14
kernel: 2.6.29-rel semc-android (AT) semc #2
build: R1FA014
K here what i need, information on to how to get this system into the new 2.1 system, i seen steps there already for build r2 but nothing on my build so any assistence, also, what should i backup? numbers? apps? (dnt really care abt apps) its mainly my pics, movies and numbers but there on sd card accept my numbers.
This is such a noob thing i know, i been out of the firm bending deal for very long time so any assistence in getting this up and running would be AWESOME!
Oh yea not to bump or anything, as far as i can see my phone where i found all this details out doesnt seam to have any branding of any sort. so i guess even global generic verison would do, but please guys tell me what would be best based on the information given above.
P.s its R.S.A :\ had some one once saying im from south america when where no where near there
Debrand. Go Nordic. Done.
Oh, and also Search!
Go here: http://forum.xda-developers.com/showthread.php?t=683793
Download X10i_2_0_A_0_504_GLOBAL.
Run the flash tool.
In 3m:40s, your phone will be on v2.1*
*Backup all your data using Titanium Backup and/or SMS Backup & Restore first. Install SEUS, PC Companion and connect your phone in flash mode before using the flasher so that all the drivers install.
Video:
Hi sorry for the delay, ok this is soooooo awesome but the point i need to know, my build is really old, will it work fine doing all the things in that link u gave me ? cause that looks like only upgrading the firmware. i will be doing this as soon as i can find this file on another sharing site, im having issues with hotfiles and rapidshare of late. thus the delay in reply .
so will this work on build: R1FA014 as is, or do i need to upgrade something, my phone is non-rooted
sbdragon89 said:
Hi sorry for the delay, ok this is soooooo awesome but the point i need to know, my build is really old, will it work fine doing all the things in that link u gave me ? cause that looks like only upgrading the firmware. i will be doing this as soon as i can find this file on another sharing site, im having issues with hotfiles and rapidshare of late. thus the delay in reply .
so will this work on build: R1FA014 as is, or do i need to upgrade something, my phone is non-rooted
Click to expand...
Click to collapse
It will update both your firmware, 1.6 - 2.1 and build R1FA014 to X10I Global.
Will work on yours.
Hey guys, thanks for the help! best part when i started to do this, getting the SUES to install the correct drivers, i tryed the Online update and sony updated my phone to what seams to be identical version above. so i believe my phone is generaly a global version, Thanks you guys for the support, this gave me a better understanding on how to root a device for future use.
ok.... soo lemme start my saying this, I am a total noob when it comes to android let alone the dell streak.
I got a second hand dell streak from ebay, unlocked running froyo 2.2, when i turn it on an O2 logo shows up.
Now with that said... i think my dell streak was an American version, when i put the service tag in the dell website it said USA.
now i dont know anything else about the device.
now i went to the settings got this information from there:
Baseband Version: GAUSB1A131921-US
Kernal Version: 2.6.32.9-pref
Build Number: 12792
I did run a Quadrant Test and got:
865
i am was happy with my streak until i saw some of the other result people were getting with the same phone.
What can i do to make this better?
i hear alot of stuff about DJ Steve and streakdroid, and from what i understand they are versions of the android 2.2, which one is best?
how do i install it on my phone?
can someone help??
there are whole threads about this in this section. There is only one guy making roms, so basicaly your choice is an official 1.6/2.1/2.2 rom or dj Steves Froyo 1.6 (installorama).
No one can tell you whats best for you, have a read and make up your own mind.
yasir_jan87 said:
ok.... soo lemme start my saying this, I am a total noob when it comes to android let alone the dell streak.
I got a second hand dell streak from ebay, unlocked running froyo 2.2, when i turn it on an O2 logo shows up.
Now with that said... i think my dell streak was an American version, when i put the service tag in the dell website it said USA.
now i dont know anything else about the device.
now i went to the settings got this information from there:
Baseband Version: GAUSB1A131921-US
Kernal Version: 2.6.32.9-pref
Build Number: 12792
I did run a Quadrant Test and got:
865
i am was happy with my streak until i saw some of the other result people were getting with the same phone.
What can i do to make this better?
i hear alot of stuff about DJ Steve and streakdroid, and from what i understand they are versions of the android 2.2, which one is best?
how do i install it on my phone?
can someone help??
Click to expand...
Click to collapse
This is a Question so it belongs in the Q&A FORUM and not in Android Development
Moving to Q&A
stoney73 said:
there are whole threads about this in this section. There is only one guy making roms, so basicaly your choice is an official 1.6/2.1/2.2 rom or dj Steves Froyo 1.6 (installorama).
No one can tell you whats best for you, have a read and make up your own mind.
Click to expand...
Click to collapse
Thank you for the info. Just upgraded dj Steve's 1.6 and it working great the quadrant score doubled I am at 1537 right now.
Sent from my Dell Streak using XDA App
Hey there everybody. I got my Viewsonic G Tablet a few days ago and have been enjoying it immensely. I have been looking at the roms (Already tried the TnT Lite 4.4 rom, reverted back to the backup I made) and I always see this "Warning, do not do such and such if your stock rom is ####."
Well, my question is really simple, and probably has been answered 500 times (Believe me, I looked, couldn't find anything) but I still have to ask. How do you tell what your stock rom is? (Like, the rom that is installed on the tablet when you buy it.)
Hope that makes sense. Thanks everyone!
You will find it under settings, about this tablet...or something similar. Look for the UI version.
Steve in CT
Sent from my VEGAn-TAB using Tapatalk
Hmm. Model Number: UPC300-2.2, Android OS: 2.2, Tap UI: 1.1-3588, Kernel Version: 3.6.32.9-00000-10.8.2, and Build Number: FRF91, none of those look like what everybody was talking about... I mean, I could of just overlooked it (Very possible) or not sure what I am looking for, but I don't see it...
However, I appreciate the help!
Edit: Wait, is the Tap UI's 3588 the rom number that I am using? Hmm...
Yes...your on 3588
Greetings! I've recently acquired an unwanted Motrola Atrix 4G and I'm wanting to upgrade it to the latest version of Android. Here's the tricky part - it's a Canadian (BELL) phone with an inactive SIM, and I'm not too sure what has actually been installed on it.
As far as I can tell, the previous user has 'Greyblurred' the device (See Here: http://forum.xda-developers.com/showthread.php?t=1070076) and flashed it with the custom SBF linked in the thread.
How would I go about updating the phone to Gingerbread? Is an OTA update possible without bricking it?
I should mention that this is my first smart phone, though I quite familiar with the terminology and it's applications. Just a nudge in the right direction would be fantastic.
Here's the system information, if it's of any help:
Code:
System Version: Version 4.2.1.1.MB860.Retail - Blurred
Model Number: MB860
Android Version: 2.2.2
Baseband Version: N_01.92.00R
Motorola Webtop Version: OSHWT_U1_6.54.0
Kernel Version: 2.6.32.9
[email protected] #1
SMP PREEMPT Thu Apr 28 22:58:25 CST 2011
Build Number: OLYEM_U4_2.1.1 - GreyBlurred
Thank you kindly in advance - any help is appreciated!
So it's been almost a year and I figured I'd give this a bump rather than create a new thread. Does anyone have even a whiff of a suggestion? Thank you kindly, in advance.
Okay, I must say I'm quite surprised. Even after almost a year you still haven't been able to research this on your own?
This forum is crammed with various detailed tutorials and guides, that should be enough to get anyone started...
The most obvious first step would be to determine if the phone shows "Unlocked" while booting and/or has a custom recovery installed.
ravilov said:
Okay, I must say I'm quite surprised. Even after almost a year you still haven't been able to research this on your own?
This forum is crammed with various detailed tutorials and guides, that should be enough to get anyone started...
The most obvious first step would be to determine if the phone shows "Unlocked" while booting and/or has a custom recovery installed.
Click to expand...
Click to collapse
The phone does not say unlocked. However, it does have CWM installed.
I have read through every tutorial. The issue isn't determining how to get the phone flashed to a newer ROM, it's the fact that it has a unique SBF's on it, and I am unable to receive OTA updates (though that's obvious). I'm wanting to simply upgrade it to the newest version without bricking it.
Since it dealt with flashing an SBF that has since been unsupported, I figured I should ask first, before going ahead and fiddling on my own.
Also, it being a BELL model it all the more frustrating!
(And, I am unable to take it to a BELL service store/send it in etc. since I am in Sweden.)
You have CWM. You have absolutely no need to touch a SBF ever again.
Just flash a ROM through CWM. There is no way to brick the phone that way.
All CWM-flashable ROMs work on all devices.