I am rooted and running darkrevenge 2.0. I have been running it several days with no issues. For some reason, my screen now only comes on intermittently. I want to get back to stock so I can take it in to Verizon. I have been trying to odin and keep getting a md5 hash not valid. I was going to try and get into terminal and adb it back, but it will not boot into cwmod. All it does is keeps booting the startup screen over and over and over. Any ideas?
I downloaded odin and DL10 .tar and flashed in odin. went smooth. then you can check for update to go back to EA28.
be sure to take your battery out then open odin, hold volume down and plug in usb, odin should show you the com port is connected and hit start,,,,,,Walla.
davezaff said:
I downloaded odin and DL10 .tar and flashed in odin. went smooth. then you can check for update to go back to EA28.
be sure to take your battery out then open odin, hold volume down and plug in usb, odin should show you the com port is connected and hit start,,,,,,Walla.
Click to expand...
Click to collapse
remember to use the PDA button.
do NOT, i repeat, do NOT use the phone button in odin.
Related
so i was wanting to load the bionix rom, so i did a nandroid on my last rom. bionix was "okay" so i decided i wanted to go back to my eugene rom.
so i use rom manager to load the old image, and while doing so it gives me some error that i should report to rom manager. i cant exactly say what it was. so i told it to reboot, but now im back on bionix, and all my apps are crashing. i cant get into the launcher or anything. so getting to rom manager was out of the question.
so i call my friend who says i probably need to load a stock image, which thats fine whatever. so i do some googlin' and i come across this method forum.xda-developers.com/showthread.php?t=734475 (new user..cant post links)
i try to follow the directions best i could. ive never used odin before. so for the "pit" i select the "samsung galaxy s firmware flasher" (which was the only file my computer let me pick) and for the pda part i selected t959uvjd.tar file they also had listed. also the instructions said i didnt need to select the other boxes (phone, csc, etc)
so i put it in recovery, hit start, after a few minutes my screen just shows the little android guy and a caution sign. odin still says "file analysis" and its been like this for about 20 minutes...
so....where do i go now? please be as descriptive as possible..apparently im still a lil green at all this
How did you get into recovery mode? Are you sure it wasn't download mode? Did you use the hardware way with vol up +dwn and power or did you use adb
http://lmgtfy.com/?q=did+i+brick+my+vibrant
splayer7 said:
How did you get into recovery mode? Are you sure it wasn't download mode? Did you use the hardware way with vol up +dwn and power or did you use adb
Click to expand...
Click to collapse
i used adb to get into recovery. i figured out its not bricked. i restarted it and its doing the same thing. by that i mean it boots up, but all my apps are crashing still..so i guess i gotta figure out how to actually use odin to mount the stock image.
before you use odin, make sure you are hardware unlocked. I bricked one that was hardware locked using odin. Read, read, read.
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
BossDj said:
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
Download mode for me is an android guy is IN a triangular caution sign & says "downloading..."
Stock recovery with the MENU button pressed shows me an android standing next to a caution sign. Think the op should clarify.
All~G1 said:
Download mode for me is an android guy is IN a triangular caution sign & says "downloading..."
Stock recovery with the MENU button pressed shows me an android standing next to a caution sign. Think the op should clarify.
Click to expand...
Click to collapse
I do remember the little andriod guy and the caution sign from the one and only time i got stuck in stock recovery. I can't boot to it with any button combo, but the first time I tried to make an update.zip myself, well, yeah i got rebooted to stock recovery. My mind went to dl mode when I read the op, as thats what I have the most experience using, and luckily can boot to that way easily on my phone. I think you are correct G1, op may be booting to recovery mode and attempting to flash, when dl mode is whats necessary.
Sent from my SGH-T959 (+ bionix 1.3 + kingklicks kernel = sexiness) using XDA App
BossDj said:
The android guy and the caution sign is download mode, what you need to flash odin. Odin can be finicky. Once your in dl mode on your phone, unplug it from the usb cable, then launch odin and load the files. Reconnect your pc and you should see a com port light up in odin. If it doesn't light up, disconnect and reconnect again, or relaunch odin, reload the files and then reconnect the usb. Sometimes it takes some playing with it to find the right combo to make it work. After that its happy flashing time, you should see the progress under the selected com port in odin, kick back and wait for the reboot.
Be sure you have the GalaxyS drivers loaded on your pc too, your comp will never see your phone in dl mode without the drivers
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
Click to expand...
Click to collapse
well origionally i was not in download mode, i only saw the screen i was talking about once, but i ended up actually getting it into download mode and using odin tried flashing the stock roms. it would hang everytime. the only rom i was able to get working was eugenes froyo port. its incredibly buggy and a whole lot of things dont work correctly on my phone. i tried the unlocking method to see if that helps, but my phone is really fighting everything i do right now.
but i do have a replacement coming, so im just gonna deal with a phone that wigs out whenever i try to do stuff for a few days.
Hello ppl
I've had some problems with my Samsung Vibrant (The T-Mobile model) since last friday. As I am kinda new to android, i did some stupid things, such as inserting GT-i9000 firmware into it by mistake, wich didn't work.
So I downloaded JI5 firmware, inserted it into my Vibrant using Odin, and upgraded it to JI6 using Kies.
The only thing I was bothered is that every time i switched my phone On, the 1st screen I was seeing was "Samsung Galaxy S GT-i9000", wich suddenly was changing into VIBRANT and the boot was going on OK, and I could use my phone normally.
In fact, not normally. I couldn't root it with One Click Lag Fix, nor with that update.zip thing in recovery mode, since I couldn't enter recovery mode (the keys combination were not working at all for it).
After a few hours of google, I found nothing that would solve my problem. By this far, I've have already downloaded a lot of firmwares, and i was still seeing the GT-i9000 screen before everything, and could not root or access recovery mode on myd device.
Then it came to me the GREAT IDEA! Download JI4, and older firmware, and upgrade it using KIES to JI6.
First step was alright. I downloaded JI4, installed on my vibrant using Odin... but when I started kies to upgrade it, Kies told me my fw version wasn't upgradeable. Damn!
So i decided to turn back to JI5 using Odin.
Occurs that when I start my phone in "download mode", now it shows me a screen saying "POWER RESET or UNKNOWN UPLOAD MODE". Odins recognize it normally, but when I try to upload a JI5 or JI6 firmware, it keeps stuck in this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I've tried to restart this proccess dozens of times and still had no success.
Would any of you guys help me?
My phone is working right now, with JI4, but it is not what I want!!
Close odin and restart it. Sometimes it takes a few times with odin.
Incidentally, why don't you just download the OTA JI6 file and flash it with odin on here.
Or just keep it open and open another one to flash with, that helps my odin issues
Sent from my SGH-T959 using XDA App
djquick said:
Close odin and restart it. Sometimes it takes a few times with odin.
Incidentally, why don't you just download the OTA JI6 file and flash it with odin on here.
Click to expand...
Click to collapse
I've tried to open and restart it hundreds of times...
And i didn't receive the OTA JI6 file yet, i think that is due to the fact that I live in Brazil
Hey. I recently was using the Froyo Rom that had the same boot screen that read "Samsung Galaxy S GT-i9000." I also have a TMobile Samsung Vibrant. I had that same problem with recovery where none of the keys would work. I resolved the issue by using oding and I flashed T959UVJFD which is the original shipped FW for it. Try that method.
Remember use Odin 1.3 version. In Odin, place a check box in "Re-partition" and leave everything else the same. Select your 512.PIT for PIT and Phone should be set to
T959UVJD.tar. Than select start. Before that make sure your phone displays "Downloading Mode". Remove battery first and Re-insert it, while holding both up and down volume keys (make sure usb cable is connected into phone first) than finally open up odin, connect the usb cable to the computer. Odin should detect it with a yellow COM Port ID.
Thanks.
mulcahyd said:
Hey. I recently was using the Froyo Rom that had the same boot screen that read "Samsung Galaxy S GT-i9000." I also have a TMobile Samsung Vibrant. I had that same problem with recovery where none of the keys would work. I resolved the issue by using oding and I flashed T959UVJFD which is the original shipped FW for it. Try that method.
Remember use Odin 1.3 version. In Odin, place a check box in "Re-partition" and leave everything else the same. Select your 512.PIT for PIT and Phone should be set to
T959UVJD.tar. Than select start. Before that make sure your phone displays "Downloading Mode". Remove battery first and Re-insert it, while holding both up and down volume keys (make sure usb cable is connected into phone first) than finally open up odin, connect the usb cable to the computer. Odin should detect it with a yellow COM Port ID.
Thanks.
Click to expand...
Click to collapse
I was just coming here to tell this. I've downloaded T959UVJFD and made this to enter download mode correctly:
METHOD 1: ACCESSING DOWNLOADER/RECOVERY:
(if the following directions do not work... then your phone may be locked out from using hardware buttons to access downloader/recovery)
Download Mode:
With the phone powered off
Plug in the USB cable.
Turn the phone on it's side and use both thumbs to hold (left thumb) Vol Up and (right thumb) Vol Down
Press and hold the power button with your right index finger til you see "Virbant" release the power button and it should say Downloading.
Recovery Mode:
With the phone powered off
UnPlug the USB cable.
Turn the phone on it's side and use both thumbs to hold (left thumb) Vol Up and (right thumb) Vol Down
Press and hold the power button with your right index finger til you see "Virbant" release the power button and it should be on the recovery screen.
Click to expand...
Click to collapse
(found here: http://forum.xda-developers.com/showthread.php?t=771247)
Now i'm upgrading to JI6 with KIES, i think everything is gonna be alright.
Cool. Glad to see things will be okay now.
Using KIES is your first mistake, even T-Mobile doesn't recommend it...
Make sure you have the Samsung USB drivers installed to use ODIN.
Moved to...Q&A
So here is what happened. Running Nero 3 w/voodoo enabled. Disabled Voodoo and rebooted, got stuck at Vibrant screen for an hour, booted into recovery and confirmed voodoo was disabled. Rebooted and am stuck on the boot loop with a crazy voice saying something I can't understand.
So I am trying to use Odin 3 1.7 to reflash to stock. But Odin doesn't recognize my phone.
This is what I've done so far (after searching around for hours): After going into download mode, my computer only found a "gadget serial". I installed the SAMSUNG Android Composite ADB Interface driver and now my computer recognizes it. But it says "device cannot start".
Any help/ideas/thoughts would be much appreciated!
take the simplest approach, put nero v3 back on your internal and flash it.
the voice was LINDA (android voice) disabling voodoo, this can take up to 10 minutes (usually a little less).
What were you wanting to change to, from nero v3? (why did you disable voodoo, I assume you were going to flash something).
Just throwing this out there, because I almost made this mistake...
Are you sure you didn't jump the gun during the reboot? It can take a while to
complete and Linda chimes in a few times with stuff you can't hear unless it's quiet and your volume is up.
I would love to just go back to Nero 3 and wasn't trying to flash anything new, I just wanted to disable voodoo in case I forgot later on.
I would also love to be able to flash anything, but I can't get into recovery mode at all anymore. Any suggestions on that?
And I can't get Odin to see the device and the computer (Win 7) says the device can't start.
To connect to Odin is the phone off?
Shut off the phone and hold the volume +- then plug in the usb.
If that doesn't work take the battery out and plug in the usb. While holding volume +- put the battery in the phone.
Hopefully one of those gets it to connect to Odin. You will see a com port light up in Odin.
Yes, the phone is on. I have the download screen lit up. My problem is that in device manager, it appears that the computer is saying that the device won't start. I'm stumped. I am going to try a different computer. Maybe its Windows 7.
zedgar said:
Yes, the phone is on. I have the download screen lit up. My problem is that in device manager, it appears that the computer is saying that the device won't start. I'm stumped. I am going to try a different computer. Maybe its Windows 7.
Click to expand...
Click to collapse
Open Odin before connecting the phone in download mode. The phone should be off when connecting to Odin.
Still no luck, off or on when connecting to Odin. Odd, b/c I've used Odin before. I am still thinking it is a driver issue.
If you used ODIN on that same pc, it is not a driver issue.
take the battery out.
put it back in.
open ODIN
plug USB into PC
hold both volume buttons (and keep them held)
plug usb cable into phone
download mode, right?
did ODIN show a COM# in yellow, yes right?
load the pit and tar files (I use the files in my noob guide alt method since it keeps root)
press start, nothing else, wait for it to reboot.
damn. even if you follow the instructions, sometimes something bad will happen.
Sent from my SGH-T959 using XDA App
I am actually using a different PC at work. This is why I think it is the driver. I follow all the steps and still no yellow box in the COM. When I go into device manager, I see the device but the warning that it cannot start (code 10). So hopefully everything will work out on my computer (XP) at home where I used Odin before.
I will update once I do that
So here is an update. Got home and Odin recognizes the device. The problem I now have is that it stays stuck on SetupConnection. Do I just wait a number of hours or is there something else I've done wrong?
Do you have the right stock rom TAR file and PIT file? Did you check box repartition?
Sent from my SGH-T959 using XDA App
Thanks to all and Further update:
I got it to start downloading but now Odin stalls at factoryfs.rfs
I'm running 512 PIT and JFD tar.
I've taken out the SIM/External SDs and have tried all the USB Ports. Any thoughts? It seems so close but yet so far away.
I am downloading the tar and pit files again and will reboot, etc. Hopefully that will get me over the edge.
Did you check the repartition box when you tried to odin? Place pit file with pit section obviously. Place tar file with pda section. Check the repartition box. Do you remember if the voice actually said "voodoo is now disabled"? If not it still might have been activated which will make it much more difficult.
Sent from my SGH-T959 using XDA App
Solved (hopefully)!
What I did was download the all_in_one zip that had two .tars in it and used the "original" one. For some reason I can't find a link to that thread or I would certainly post it here and give my thanks etc. If someone has that handy, please post it.
I will check to make sure everything is working fine, but so far so good.
Overall lessons...this is a tough phone to brick and the excellent people here can help. Even just brainstorming leads to one finding a solution on their own.
The combo of different downloads of the .tar/.pit rebooting, different ports somehow worked.
Glad to hear it worked
Sent from my SGH-T959 using XDA App
Searching was a mess of incoherent threads (or maybe I don't know how to search correctly).
I am on Bionix V and with voodoo lagfix from Nero V5. I want to Odin back to stock and apply the 2.2 update. I am giving my phone to my dad and he wants it stock as a rock.
I disabled the lagfix via CWM and let it do its thing. When it booted back up, the file structure was different (obviously) and all of my files were "gone"...which I didn't care about since I already backed everything up.
The problem is my PC would NOT see the Vibrant via ADB. In fact, I couldn't even get it to show up as a removable drive. I re-enabled Voodoo, file structure came back, and bam, my PC recognizes it as usual.
What am I doing wrong?
Well if your gonna go back to stock the disable voodoo in cwm , reboot and let it convert back to rfs and boot up. Hold your power button to get the Power options screen and go to Download Mode. Open ODIN, plug your phone into your pc and add the 512.pit to PIT and your .tar flash file to PDA, makes sure repartition is not check and you have a yellow COM port showing and hit Start.
jmcghee1973 said:
Well if your gonna go back to stock the disable voodoo in cwm , reboot and let it convert back to rfs and boot up. Hold your power button to get the Power options screen and go to Download Mode. Open ODIN, plug your phone into your pc and add the 512.pit to PIT and your .tar flash file to PDA, makes sure repartition is not check and you have a yellow COM port showing and hit Start.
Click to expand...
Click to collapse
So manually placing it in download mode is the missing link?
I always did
adb reboot download
to put in download mode before.
Today was I was watching the video on how to flash darky's resurrection.zip rom,
then zi tried flashing it to my wifes Vibrant , I folloeed the video step by step. I used odin I get the green light saying the phone passed then when it reboots it get stuck on the galaxyi900 screen and it doesnt boot up. Ive flashed the thing with odin at least 10 -15 times after and still no luck, it keeps getting stuck at the opening. My wife says if I dont fix it I have to buy her a new phone. Someone save me please!!!!!!
LMAO........... yeah my wife said the same thing...... sounds like you may have not disabled the voodoo lagfix before the flash.
you will probably need to flash back to stock. I am not sure what is stock on this phone I am going to assume it is the same Vibrant.
If you can get into recovery and you did have voodoo installed disable it. If not you can disable it on your phone and copy the folder and then load it into the internal sd card messed up phone and replace the old folder.
Then you may need to use Eugenes froyo that does not brick as a intermediary flash. if you can Odin that (use Odin 1.7) then when it you flash it do not check the repartition box. When it is beginning to reboot, do not let it fully reboot, pull the battery. Then Redo the Odin as described below:
Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Leave all check boxes the way they are. Check the repartition box.
Click the PIT button and select the 512.pit file
Click the PDA button and select T959JFD.tar and then click Start
When it is done you will be back at stock. Then Root the phone and go from there.
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
My phone just keeps flashing the opening Samsung galaxy s gt-i9000
Oh good I don't know the pit or .tar files sorry
Sent from my SGH-T959 using XDA App
Omar50 said:
still getting the loop! this phone is jacked up. I can enter download without pressing the power button, cause it turns on and off itself
Click to expand...
Click to collapse
take the battery out, wait 30 seconds, plug the usb cable in, and then hold both the volume buttons and slide the battery in. Presto! Download mode.
This has saved me numerous times lol. Then just flash JDF like oka said
i dont have problem entering download mode. When I flash with odin I get a pass on it. but when the phone reboots it stays on the opening screen go on and off
i download the heimdall suite 1.1.1 and the necessary windows program to run it. when i plug my phone into download mode heimdall start button isn't accessable. am i missing something?
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Omar50 said:
figured out hoew to get access to start button, dont use partition. now it gets error on recognizing the device. Im so frustrated right now I need a smoke!!!!!!!
Click to expand...
Click to collapse
Depends on what you smoke........
You may need the pit 513 file instead of the pit 512 file, these mapping files are a bit different and it may be a cause. Hard to know without seeing the phone
Also you could do a full wipe if you can get into recovery, wipe cache, phone reset and dalvik wipe (in advanced) then try That may work better for you.
It is recoverable.......... and also the best way to get your wife to calm down......... a romantic restaurant with candle light........ you go on Tuesday and she goes on Thursday........
Hope you get it fixed..........
thanks for the support but no luck I tried 513 pit nothing my phone still wont boot up I still get the opening screen then it shuts off and starts again.
im really having a bad day now i tried flashing the stock rom 2.2 with odin now the phone wont even power on! i guess its really a brick. i bought myself a paper weight