I'm aware it's not supposed to work until 2.2, is our leaked 2.2 not good enough? I'm running superclean 2.9.2, ec10 kernel, shouldn't the audio out be working?
anyone????
I have 2.2 KD1 and it does not appear to work. I have not fully tested it yet but will be sure one way or the other by tonight.
Several users have reported issues with the phone not ringing on the Fascinates. Can anyone who is experiencing this please post here with your ROM, radio and kernel? Maybe we can figure out a pattern.
I've had this issue once on I believe the DL09 radio and the EC10 voodoo stock kernel; I can't remember which Rom but i think it was a Superclean 2.9.x version.
Thanks.
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EB01 radio
No current theme
Make sure you have a ringtone set. I used the .nomedia file in /system/media and my ringtone went to silent and didn't return after I got rid of the .nomedia file. I had to go back in and reset all of my notification sounds and my ringtone.
imnuts said:
Make sure you have a ringtone set. I used the .nomedia file in /system/media and my ringtone went to silent and didn't return after I got rid of the .nomedia file. I had to go back in and reset all of my notification sounds and my ringtone.
Click to expand...
Click to collapse
I am pretty sure I didn't have that and did have a ringtone set. I verified in my /system/media folder that .nomedia is not there.
This thread is mainly to see who else is having problems. I would think though if the ringtone wasn't set it would still show a missed call; from what I have seen no missed call message shows up.
Sent from my SCH-I500 using XDA App
I had same issue on EB01 radio along with data drop. Been using the DL09 radio for about 3 weeks and has not happened since. After radio flash be sure to do the *228 1 and *228 2.
good day.
I'm having the same issue but haven't figured out why.
EB01 radio
Blackhole v4.3
Stock EC10 kernel nonvoodoo
Superdark theme v3
I've tried to *228 but neither option 1 or 2 work for some reason. I get FC's everytime I try. I've never had these problems with any other setup.
I'm starting to think it's the EC10 kernels. Yesterday I wiped and odined my phone and OTAed to EA28, loaded SC 2.9.1 w/ the EC10 voodoo kernel. Today my data signal in my house would go from 2 bars instantly all the way to 0 bars every time I would use it no matter where I was. I flashed the EB16 voodoo kernel and now my data signal was back up to steady 2 bars and hardly dropped any lower in the same locations.
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EA28 radio
No current theme
Not the kernel...it's the modem. Thread about three weeks ago discussing the same thing.
jenisiz said:
Not the kernel...it's the modem. Thread about three weeks ago discussing the same thing.
Click to expand...
Click to collapse
This is what I was thinking too. The EB01 radio seems to be the common denominator. Now if I can just find an EA28 odin file....
Smitty9803 said:
This is what I was thinking too. The EB01 radio seems to be the common denominator. Now if I can just find an EA28 odin file....
Click to expand...
Click to collapse
I'm running the EA28 radio now. I guess my data problem is a different one.
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EA28 radio
No current theme
I'm on an EC10 kernel with the EB01 modem and don't have any problems receiving phone calls.
It's only happened to me once when someone called me 4 times in a row and my phone never rang. I've recieved plenty of calls and text messages since then.
Can you *228? Everytime I try, I just get a Programming Unsuccessful message and my dialer FC's.
EDIT: Just tried *228 option 2 again and the PRL update was successful. THEN once that was over, the dialer FC'd. Weird....
imnuts said:
I'm on an EC10 kernel with the EB01 modem and don't have any problems receiving phone calls.
Click to expand...
Click to collapse
Same here...but every now and then it happens to me and I use hybrid prls on another network still utilizing vzw modems...and i've never ran into any issues till after eb01. I've tested multiple times and confirmed on my phone it is eb01.
jenisiz said:
Same here...but every now and then it happens to me and I use hybrid prls on another network still utilizing vzw modems...and i've never ran into any issues till after eb01. I've tested multiple times and confirmed on my phone it is eb01.
Click to expand...
Click to collapse
Maybe that is the difference? I get the hybrid VZW PRL pushed to my phone after I complained a bunch of times about poor service. Didn't really do anything to fix the problem, but it made the CS rep I was talking to feel better.
jenisiz said:
Same here...but every now and then it happens to me and I use hybrid prls on another network still utilizing vzw modems...and i've never ran into any issues till after eb01. I've tested multiple times and confirmed on my phone it is eb01.
Click to expand...
Click to collapse
Hybrid PRLs? You mean you can get PRLs that can access multiple carriers? Thag ooh be awmthum (stupid drool...).
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EA28 radio
No current theme
scarfman4 said:
Hybrid PRLs? You mean you can get PRLs that can access multiple carriers? Thag ooh be awmthum (stupid drool...).
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EA28 radio
No current theme
Click to expand...
Click to collapse
I don't do it on vzw though, I use sprint towers and cricket towers and pay 55 a month for unlimited everything
imnuts said:
Maybe that is the difference? I get the hybrid VZW PRL pushed to my phone after I complained a bunch of times about poor service. Didn't really do anything to fix the problem, but it made the CS rep I was talking to feel better.
Click to expand...
Click to collapse
Yeah...they do whatever they can to get you off the phone for dials lol...personally I think this issue may already be known by big red and could possibly be a hold up for the official froyo release for the fascinate. I'm not going to say how I tested my theory but I can confirm that there were several times my eb01 phone would play dumb while...nevermind you get the gist
scarfman4 said:
Hybrid PRLs? You mean you can get PRLs that can access multiple carriers? Thag ooh be awmthum (stupid drool...).
Click to expand...
Click to collapse
Verizon's hybrid PRL will re-prioritize the Alltel towers they picked up when they acquired Alltel a few years ago. I guess by default, it won't connect to them, but if you have service issues, they'll push the hybrid to you to see if it solves the problem.
So.. link to the ea28 Odin modem? Or other working Odin modem
Sent from my SCH-I500
Domush said:
So.. link to the ea28 Odin modem? Or other working Odin modem
Sent from my SCH-I500
Click to expand...
Click to collapse
So far no one has any EA28 Odin files. I started a thread but no one has posted any. I got mine by odining an older stock rom then OTAing to EA28.
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EA28 radio
No current theme
scarfman4 said:
I've had this issue once on I believe the DL09 radio and the EC10 voodoo stock kernel; I can't remember which Rom but i think it was a Superclean 2.9.x version.
Thanks.
Sent from my Fascinate
Superclean 2.9.1
EB16 voodoo kernel
EB01 radio
No current theme
Click to expand...
Click to collapse
I am in the same boat - same combo, except SFC 2.9.2 and Endert Special UV Kernel (EC10)
I have missed a few calls with no ring - but every time I test it myself it rings perfectly. It is not often, but it does happen from time to time with my phone.
I was reading about it, seems perhaps the EA28 modem may correct it (even though it seems to be very similar to EB01[from what I read, not what I understand or know), but there does not seem to be an odin file around for that modem.
I was thinking of making the time investment to flash to stock, take the OTA update and then rebuild to my current spec.
A few missed calls and yesterday my accelerometer completely quit, so this seems to be the best for me at the moment - as I learned from reading posts by scarfman
What radio are people using with the EC10 Kernel? With all of these flavors now, what's the differences?
I am still on EB01 radio.
I assume the EC10 kernel does not improve or effect quality of 3G signal / GPS signal?
EB01 radio
Well you have a choice between EB01 or DL09 depending on how each one performs for you. My choice has been the DL09 for battery, data, and signal reliability.
good day.
I have been running DL09 for a week and i seem to have better signal and 3G
EB01: Mesmerize radios *do* have carrier differences.
Hmm. EB01 and DL09 are vzw based and not uscc. Haven't heard a mention of any mez radios running on the SF. EB16 that is mez based but haven't seen a released radio for that runs on the SF.
good day.
i have found no difference in eb or dl09 modem
Sent from my SCH-I500 using XDA App
I've been using dl09 because it *seems* like I get better battery life with it.
Has there been any evidence to back dl09 better bat life?
Are there any trade offs to using dl09? Anyone have a good link I'm on eb01 and wanna try dl09 thanks in advance!
See here.
good day.
I've always had awesome signal, but since I went to ED01 (used the downgrade to DL09 and then OTA up to ED01,) I've got low signal with frequent '...' lack of service.
Am I alone?
I'll probably be flashing back to EB01 if there isn't any advice.
Looks like someone else is asking the same thing:
http://forum.xda-developers.com/showthread.php?p=13172343&posted=1#post13172343
I am thinking it must be the weather... will know for sure when things clear up and I can do more unscientific testing. Am currently on ED01 radio with EF 3.3.1 and have not noticed anything terrible. But like you I had the GSP epiphany when I went from EB01 radio to EC01 with SC 2.9.2 plus the GPS fix (NTP changed to us)...
I am currently running the Evil Fascinate 3.6 Rom with the OTB Reloaded 1.6 Kernel and the official ED04 Radio. Definitley like this setup but was wondering if there is anything else i should try? Haven't really done anything as far as overclocking but i would like to speed up my phone a bit but not too much were it kills my battery. and would like to get the best possible signal as far as the radio goes. The radio I'm using i will sometimes have a missed call or lose satellite location within the GPS. Just looking for any setup recommendations that someone else might be using that is getting a great result in every category. Any theme recommendations would be appreciated as well. I don't have a theme flashed yet with the EF 3.6 because I like the black theme.
I'm running ComRom 2.1 over ED01 with imnuts' PBJ -50 voodoo kernel. My fascinate doesn't take kindly to overclocking so PBJ is perfect. Phone's pretty snappy and gets good battery life (24+ hours on a full charge with moderate use), and I have yet to miss a call. Signal is decent like always and I usually get a pretty quick lock with gps.
tapatalked from my KangBanged Fascinate
I use Jt1134's CM7 (0704 build) with Nemesis2all's OTB for MIUI/CM7 (0704 build)
I have it OCed to 1.4 GHz running stable. (Battery life is excellent too. . .*)
I use the ED01 radio. It seems very stable and the signal is great.
*Still needs calibrated though. . . will update when done.
Question about CM7?
Ok thanks for the info. Quick ?, are you running into any problems with the CM7 rom? Heard some people had issues with MMS and some other things?
powerstroke said:
Ok thanks for the info. Quick ?, are you running into any problems with the CM7 rom? Heard some people had issues with MMS and some other things?
Click to expand...
Click to collapse
MMS is not functional in CM7. At all. Since I rarely (if ever) need or use MMS, I don't mind.
Keep in mind CM7 is still in an alpha state. So it has a couple minor issues (LED cannot be used as a torch, there is a little bit of lag in some of the sensors, etc.) But it is the most functional "alpha" I have seen.
Running EC09 radio. No complaints here.
Im running the same ROM/kernel ED04 radio setup and am getting SOD frequently. You having that problem?
Sent from my UKB 2.1 slathered w/ PB&J using XDA App
Old Crow said:
Im running the same ROM/kernel ED04 radio setup and am getting SOD frequently. You having that problem?
Sent from my UKB 2.1 slathered w/ PB&J using XDA App
Click to expand...
Click to collapse
never heard of that happening with ComRom, I suspect ED04 may have something to do with it.. I don't really know what to do about that except maybe a full data/cache wipe and reflash of ComRom or changing your radio to ED01 or maybe even EB01, never had a problem with those
tapatalked from my GINGERBANGED Fascinate
Rom: Jt's CM7 Build 0713
Kernel: Nemesis2all's OTB 2.6.35.13
Radio: EC09
Everything has been running superbly with this set up