Related
Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??
Hello, Ive searched for an answer to this but couldnt find one.
Whenever I flash a rom I always get super fast battery drainage, and random shutoffs every 5 minutes. What is the deal?
This is what I used to root/load the custom rom on my phone.
http://forum.xda-developers.com/showthread.php?t=849028
How many roms have you flashed? Have you tried reflashing the same rom?
Powered by Axura with a dash of Voodoo
GreggoryD502 said:
How many roms have you flashed? Have you tried reflashing the same rom?
Powered by Axura with a dash of Voodoo
Click to expand...
Click to collapse
I have tried with with the newest versions of Aurxora and Nero. And yes I flashed the nero twice and it still has super fast battery drainage and a lot of shutdowns.
Flonkas said:
Hello, Ive searched for an answer to this but couldnt find one.
Whenever I flash a rom I always get super fast battery drainage, and random shutoffs every 5 minutes. What is the deal?
This is what I used to root/load the custom rom on my phone.
http://forum.xda-developers.com/showthread.php?t=849028
Click to expand...
Click to collapse
I KNOW!
does your phone just soft reboot every 5 minutes? like it doesn't show the whole vibrant screen, just the tmobile and stuff.
i had this problem when i was on stock, and i called tmobile (didnt know about xda yet) and they told me to go boot into recovery, then choose... clear user data or something, and that erased everything(except sim and sd card ofc.) and fixed it, try that?
else, start using ODIN, to fix possibly every non-hardware issue.
xriderx66 said:
I KNOW!
does your phone just soft reboot every 5 minutes? like it doesn't show the whole vibrant screen, just the tmobile and stuff.
i had this problem when i was on stock, and i called tmobile (didnt know about xda yet) and they told me to go boot into recovery, then choose... clear user data or something, and that erased everything(except sim and sd card ofc.) and fixed it, try that?
else, start using ODIN, to fix possibly every non-hardware issue.
Click to expand...
Click to collapse
I get a full on shutdown. Does not start back up.
Flonkas said:
I get a full on shutdown. Does not start back up.
Click to expand...
Click to collapse
if you are able to get into download mode, i suggest you odin back is the best answer i can give you, and if that doesn't solve your problem, call tmobile and return it for another new/refurb(most likely a refurb)
xriderx66 said:
if you are able to get into download mode, i suggest you odin back is the best answer i can give you, and if that doesn't solve your problem, call tmobile and return it for another new/refurb(most likely a refurb)
Click to expand...
Click to collapse
I do not think theres a problem with the phone because this only started happening once I installed a custom rom. Im thinking I just messed up somewhere.
Flonkas said:
I do not think theres a problem with the phone because this only started happening once I installed a custom rom. Im thinking I just messed up somewhere.
Click to expand...
Click to collapse
every once in a while you must odin back to stock and start flashing, because if you keep flashing roms over and over without odin, they all leave behind a little bit of data, which keeps bugging the new version you have, and so on.
Turn off phone, take battery out.
get a computer, get your usb cord.
take battery out
plug in usb to a turned on computer
after usb, hold ONLY AND BOTH volume buttons.
while holding the buttons put in the battery.
it should now show a android digging with a yellow sign.
if your there, you can fix it, if not, try a few times again, and if you absolutely cannot get it to do this, then you have a hardware locked vibrant, which i don't know much about.
If you DO get on the download mode( yellow android digging)
go here: http://forum.xda-developers.com/showthread.php?t=771111
download the Samsung Drivers if you don't already have them, you may need to re-do everything i said up there again so the computer regcognizes your phone.
Your going to need to download a program called ODIN.
found here: http://forum.xda-developers.com/showpost.php?p=8863820&postcount=138
open odin while your phones in download mode, on the top does it say COM3, COM5 etc? any number at end is good, but if it says COM it means the computer has recognized your phone thats a good job.
now you need to download 2-3 more files which will take you to stock, unrooted everything like that.
for the sake of time, i have to leave, but i found you a thread with exact instructions as mine, and with other helpful things as well.
http://forum.xda-developers.com/showthread.php?t=799105
Well... if you're definition of battery drain extremely fast is 10-12 hours then that's all you're going to get, deal with it. But if somehow you're getting like 4-6 around this area that's not normal.
Make sure you have GPS and WIFI OFF and bluetooth also when you're not using them.
Use titanium backup pro to freeze all the apps you don't use, especially preinstalled apps like wifi calling and the like.
Or, wipe battery stats and recondition or use this link to flash stock rom and this should fix any unknown problems
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Rooted with superoneclick
installed cwm from rom manager on the market
installed Stock+Voodoo kernel through odin
tried to install eb01 rom through odin, it failed
got into download mode again
tried installing DI01package3.tar through odin it failed at around 60%
download mode/recovery mode won't start anymore.
instead when I connect the phone I get some weird loading thing that's not moving
and now my PC won't recognize it
Picture of the loading thing?
Also, did you flash the voodoo for another phone?
EDIT: Try taking the battery out and holding the down button while plugging it in, if that doesn't work, you probably flashed something for another phone and you'll need to either use a jig or get a warranty replacement.
EDIT2: Also try this:
Turn the phone into the download mode by pressing and holding Volume Down + Home + Power.
or this: take out the battery, hold both Volume Up + Volume Down and plug it into usb.
Sent from my SCH-I500 using XDA App
batmarde said:
Rooted with superoneclick
installed cwm from rom manager on the market
installed Stock+Voodoo kernel through odin
tried to install eb01 rom through odin, it failed
got into download mode again
tried installing DI01package3.tar through odin it failed at around 60%
download mode/recovery mode won't start anymore.
instead when I connect the phone I get some weird loading thing that's not moving
and now my PC won't recognize it
Click to expand...
Click to collapse
Do you have a Verizon or telus fascinate?.....
nitsuj17 said:
Do you have a Verizon or telus fascinate?.....
Click to expand...
Click to collapse
telus fascinate
I would show a picture but I need at least 8 posts
Oh em gee
Sent from my SCH-I500 using XDA App
That was a no no. Those were for the Verizon Fascinate. That's over my head but maybe someone else knows a way to recover from it. Otherwise, you have a brick. And there really should be different sections for the various carriers.
It's for verizon man
Sent from my SCH-I500 using XDA App
tyler1234567 said:
It's for verizon man
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
god damnit I had someone walk me through.
should've reset when it still opened recovery mode
hey I dont know what thread I read this on but there was a way to force your phone into download mode, I think the thread is call fun resistors or something.
basicaly the phone is set to do things depending on what is plug to by the usb cable, for instance if you have a car dock it pulls the car app and same for homedock pulls the clock app. well there is a set resistance that will make the phone go into download mode. download mode might be intact but the buttons might no so when you press them it does not detect, but with the resistors it might.
let me know how it goes.
jonagpa said:
hey I dont know what thread I read this on but there was a way to force your phone into download mode, I think the thread is call fun resistors or something.
basicaly the phone is set to do things depending on what is plug to by the usb cable, for instance if you have a car dock it pulls the car app and same for homedock pulls the clock app. well there is a set resistance that will make the phone go into download mode. download mode might be intact but the buttons might no so when you press them it does not detect, but with the resistors it might.
let me know how it goes.
Click to expand...
Click to collapse
Here's the link. Funny I had just been reading about this for a friend's Vibrant that went and killed itself.
http://forum.xda-developers.com/showthread.php?t=819551
Keep in mind that that is in the i9000 forum, so I don't know if each phone uses different resistances to send the phone into download mode or not. Also, I would highly recommend using the suggested USB-micro breakout board, which is available here:
http://www.sparkfun.com/products/10031
It will make life SO much easier.
Do some more googling about your phone, and about forcing it into download mode before you just go soldering in 301k resistors onto a usb board.
Good luck.
Your phone basically IS the Vibrant, follow the steps for the Vibrant to fix it, but use the Telus Fascinate Odin files.
I hope you can find a full odin package cause the DI01 package flashed the bootloaders, modem, and everything else on your phone. Most likely, you have a true brick and you aren't going to be able to fix it.
Sent from my Froyo Fascinate
imnuts said:
I hope you can find a full odin package cause the DI01 package flashed the bootloaders, modem, and everything else on your phone. Most likely, you have a true brick and you aren't going to be able to fix it.
Sent from my Froyo Fascinate
Click to expand...
Click to collapse
If you can't find one, use one for the Vibrant, it won't hurt seeing as you already flashed the files for the VZW Fascinate.
If he has anything appearing on the screen at all, it's not a true brick. There's a Telus fix-all Odin. He needs to jig himself into download (see this thread for the simplest method) and apply that (step 1 in this post).
Do *NOT* use any Vibrant Odin stuff. The SBL for that can actually kill the Telus deader than dead.
im a verizon fascinate user i applied thru odin the lastest voodoo kernal 5.4.1 for froyo..im stuck at the screen saying "galaxy S gt-19000..i can get into download screen but im not sure what to do to correct this when im in download..any guidance what b much appreciated thank you very much in advance
nygbaby91 said:
im a verizon fascinate user i applied thru odin the lastest voodoo kernal 5.4.1 for froyo..im stuck at the screen saying "galaxy S gt-19000..i can get into download screen but im not sure what to do to correct this when im in download..any guidance what b much appreciated thank you very much in advance
Click to expand...
Click to collapse
You should apply the DI01 Odin fix-all package adrynalyne posted.
The OP, on the other hand, is on Telus so he needs a different Odin fix-all package.
do u have a link to that pls
i found it ty very much for steering me in that direction..ill post back when im done..i found as an answer to a completely different issue..so im assuming since i didnt find the original thread that i just launch it in odin and it will do its thing correct?
nygbaby91 said:
i found it ty very much for steering me in that direction..ill post back when im done..i found as an answer to a completely different issue..so im assuming since i didnt find the original thread that i just launch it in odin and it will do its thing correct?
Click to expand...
Click to collapse
the full di01 gets odin In via pda yes..
Next time you want to apply voodoo use cwm
Rocking dj05 and jt's voodoo 5
thanks so much man u saved my phone w this info im back up and running
My phone is stuck on the recovery screen with no usb connectivity. I cannot connect to ODIN nor can I get back to the main screen. And before anyone asks YES I HAVE THE CORRECT DRIVERS INSTALLED. My problem is that my phone will no connect to USB AT ALL. I had rooted my phone with an old root method, well I downloaded SGS Kernel Flasher and tried to flash to a new kernel because the fascinate I had wouldnt connect to usb to flash to the new CWM. When I flashed the kernel my phone is now stuck in the recovery screen with no usb so i cannot connect to ODIN. The recovery screen is the stock one. So i was hoping someone here had a ZIP file that I could flash that could at least get me back into the stock rom. Any help in very very appreciated.
I would pull the battery, hold down the volume down button and plug the usb chord in and try to odin back to stock, but it sounds like your phone could have a faulty usb port too
Edit: Also, I'm pretty sure this is in the wrong section of the forum
Sent from my MIUI'd Fascinate
Pull the battery..and do the usb cord and volume trick to get into download mode.. or have you tried that AFTER the whole stuck in recovery bit? Maybe I didn't read your post right.
Edit: damnit manic lol, beat me to it
[Neuman]
SCH-I500 - EC09 Radio/MIUI FascinateMTD/Glitch V11.1 LL @1.2ghz -100mv/DarkWhite
Yes you are correct. My usb port doesnt work at all. I was hoping for the 2.2.2 update.zip file so i could flash it using stock recovery.
Let me get this correct you are in samsung's stock recovery looking for a OTA zip? And if so what one you looking for ED01, i assume
Im looking for the a zip file that will take me back to stock and will also work with stock recovery. I dont really care which one. I just need to get back to a working phone. And yes I am stuck in the recovery screen. When it trys to go through the normal boot process it just takes me straight back to recovery. I have tried doing the factory data reset and it takes me right back again to the recovery screen with no OS loaded on it.
This might help if you are trying to get ED01
http://forum.xda-developers.com/showthread.php?t=1044474
Man no usb, no odin, no good
There has to be a way to do this without usb or odin........
I tried flashing the one you just gave me in the post and it gives me an error code 2
I assuming that the kernel you flashed was a voodoo kernel? That might be the issue too. If it converted Odin is the way out. I don't know why they don't just make phones boot from sd card like the Nook Color. Man that would be nice. Just a thought, did you try to place a cwm update zip on the root of your sd card and try using stock recovery to access cwm? Then flashing a rom. I have never tried that with fascinate but i know it worked with the droid eris I had.
jdellingson7 said:
Just a thought, did you try to place a cwm update zip on the root of your sd card and try using stock recovery to access cwm? Then flashing a rom. I have never tried that with fascinate but i know it worked with the droid eris I had.
Click to expand...
Click to collapse
Definitely try this. So is your usb "fried" or actually broken?
you could have spent 3 seconds and looked for this thread http://forum.xda-developers.com/showthread.php?t=1124391
sfd0124 said:
you could have spent 3 seconds and looked for this thread http://forum.xda-developers.com/showthread.php?t=1124391
Click to expand...
Click to collapse
you could have spent three seconds and read this thread. he can't odin because his usb port is busted
try putting this on the root of your sd card: http://www.megaupload.com/?d=OLKZRCE9
it should take you to cwm after you hit "apply /sdcard/update.zip". from there you should be able to flash a stock or custom touchwiz-based rom (i.e. CommRom 2.1), and from there, who knows?
following instructions is a vital part of making sure things pan out like they should. My first observation is that you cant do that...WRONG SECTION brah
This does not belong in dev section.
FWIW, I had issues with my usb port as well. Ultimately the port failed completely and I had to have it replaced. If you google "samsung fascinate usb port replacement" you will find two companies that do this work for $40 or $50 bucks respectively.
My port started getting wonky several months after I got the phone. Cleaning the contacts with a piece of card stock dampened with isopropyl alcohol helped for a while. Then it went completely dead usb wise and only charging would work. Looking into the port, I could see that two of the contacts were separated from the tab and pushed to the back of the port recess. I suspect that non-oem cables I used started the ball rolling.
Verizon would not cover it under the warranty because it was "physical damage".
I tried unsuccessfully to find a way to restore back to stock without Odin, afaik there ain't one. I recommend replacement of the port if you suspect physical damage and then use only oem cables.
dfgas said:
This does not belong in dev section.
Click to expand...
Click to collapse
And this is why I hardly look at xda anymore. So annoyig to read this over and over and over and over and over and over.
Hey can anyone tell me did this get posted in the wrong section... Idt the OP is aware of that... Just help the man for christs sake I mean does it really matter that much... Do ppl need 2 punch holes through their wall cuz someone posted in the wrong section.... Im sure this is part of the reason adrenaline and jt r gone
Sent from my SCH-I500 using XDA App
So last night I decided to play around with my phone since I had been running stock ICS for a while. I still had some battery issues so was going to try out a few roms and see how they were all doing these days. I started off by flashing a siyah kernel using odin to get root. Everything went smooth. I then installed ROM manager and stupidly tried to flash CWM from within the app. The app completely froze and once I rebooted the phone would not boot correctly. I get the initial triangle bound galaxy s II screen but after that just a blank screen. Beyond that, the buttons and display flash ever so often very briefly but thats it. I could still get to download mode so I figured I would just use the "return to stock" thread to start over. Unfortunately I seem to have completely messed something up because I can't finish flashing anything, the computer beeps like I unplugged the USB cable and plugged it back in in the middle of anything that takes longer to flash than just a kernel and odin reports that it fails. When I used to just leave my phone plugged into my computer and it was at full charge it seemed to randomly do the same beeping as well. I think my next plan of action is to let the battery drain a bit and try to do a full flash (with bootloaders) and hope that it makes it all the way through without disconnecting as it seems to shut down the usb connection when at full battery for some reason.
In summary, I can get to download mode at this point, or a firmware failed to load screen. Ive tried various things with odin, heimdel and kies to no avail. Odin seems to have some marginal success except for the random disconnecting. Anyone have any advice for me (beyond trying to flash with the phone at around 50% battery or am I buying a Galaxy Nexus today?
Thanks in advance
If u can't get into cwm just flash a stock firmware from the download repository or from creepycrawlys sig. Odin should work fine in download mode regardless of what recovery rom manager installed. Make sure u have the latest drivers on your computer for the i777. Also I've found when I do the Odin flashes that the best way to get it to work is to start Odin with yer phone disconnected THEN connect it after Odin is started. Don't use rom manager in the future.
Sent from my SGH-I777 using Tapatalk 2
Please do not name your thread "Derp." I it is even less helpful than saying OMG HALP I BRICKEDED MAH PHONE PLZ HALP NAO.
Sent from my SGH-I777 using Tapatalk 2
Thanks Phalanx, I will continue to pound away at it with Odin later tonight, I hope I am able to get a full flash in and will of course share what I find.
I will use more meaningful title's in the future Nick, not sure if I can edit this one but will look.
DigitalElement said:
So last night I decided to play around with my phone since I had been running stock ICS for a while. I still had some battery issues so was going to try out a few roms and see how they were all doing these days. I started off by flashing a siyah kernel using odin to get root. Everything went smooth. I then installed ROM manager and stupidly tried to flash CWM from within the app. The app completely froze and once I rebooted the phone would not boot correctly. I get the initial triangle bound galaxy s II screen but after that just a blank screen. Beyond that, the buttons and display flash ever so often very briefly but thats it. I could still get to download mode so I figured I would just use the "return to stock" thread to start over. Unfortunately I seem to have completely messed something up because I can't finish flashing anything, the computer beeps like I unplugged the USB cable and plugged it back in in the middle of anything that takes longer to flash than just a kernel and odin reports that it fails. When I used to just leave my phone plugged into my computer and it was at full charge it seemed to randomly do the same beeping as well. I think my next plan of action is to let the battery drain a bit and try to do a full flash (with bootloaders) and hope that it makes it all the way through without disconnecting as it seems to shut down the usb connection when at full battery for some reason.
In summary, I can get to download mode at this point, or a firmware failed to load screen. Ive tried various things with odin, heimdel and kies to no avail. Odin seems to have some marginal success except for the random disconnecting. Anyone have any advice for me (beyond trying to flash with the phone at around 50% battery or am I buying a Galaxy Nexus today?
Thanks in advance
Click to expand...
Click to collapse
The random disconnecting sounds like either a bad cable or a bad USB port. Try to flash using a different USB cable...if that doesn't work, you may have a hardware issue.
mattdm said:
The random disconnecting sounds like either a bad cable or a bad USB port. Try to flash using a different USB cable...if that doesn't work, you may have a hardware issue.
Click to expand...
Click to collapse
Seems logical, I will try a different port and cable and see if I have better luck. Anybody have any suggestions on what package I should try first? Should I try one that includes the BLs or not? My end goal is going to be either cm9 or aokp.
DigitalElement said:
Seems logical, I will try a different port and cable and see if I have better luck. Anybody have any suggestions on what package I should try first? Should I try one that includes the BLs or not? My end goal is going to be either cm9 or aokp.
Click to expand...
Click to collapse
I would stay away from packages with bootloaders. Too easy to fully brick your phone. I would use the one creepyncrawly posted here. Make sure you read and follow the directions to avoid Brickbug. This will put you on rooted stock ICS. You should then be able to flash to your hearts content.
blutruck said:
I would stay away from packages with bootloaders. Too easy to fully brick your phone. I would use the one creepyncrawly posted here. Make sure you read and follow the directions to avoid Brickbug. This will put you on rooted stock ICS. You should then be able to flash to your hearts content.
Click to expand...
Click to collapse
I'd second this - if you get one of those random disconnects while flashing bootloaders, you could potentially be in a much bigger world of hurt...
Good news! I flashed with a different usb cable and port and it was able to complete successfully. Phone is up and running with the rooted ucle5 posted above.
I should have known to suspect layer 1 given my line of work...
Thanks again
DigitalElement said:
Good news! I flashed with a different usb cable and port and it was able to complete successfully. Phone is up and running with the rooted ucle5 posted above.
I should have known to suspect layer 1 given my line of work...
Thanks again
Click to expand...
Click to collapse
Glad it's working! Have fun flashing.
Nick281051 said:
Please do not name your thread "Derp." I it is even less helpful than saying OMG HALP I BRICKEDED MAH PHONE PLZ HALP NAO.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
The title was more helpful than your response.
DigitalElement said:
Good news! I flashed with a different usb cable and port and it was able to complete successfully. Phone is up and running with the rooted ucle5 posted above.
I should have known to suspect layer 1 given my line of work...
Thanks again
Click to expand...
Click to collapse
Glad to hear you are back up and running.
DigitalElement said:
I will use more meaningful title's in the future Nick, not sure if I can edit this one but will look.
Click to expand...
Click to collapse
ZeroIsntTheHero said:
The title was more helpful than your response.
Click to expand...
Click to collapse
Actually it looks like nicks response helped the op realize that the title of your posts are important, so that others having the same problem will see and maybe get the help they need without starting a new thread.
Shot straight outta my Taskatooned SGH-I777 Rocketship
DigitalElement said:
... I then installed ROM manager and stupidly tried to flash CWM from within the app...
Click to expand...
Click to collapse
I have read several times that you should not use ROM manager on the SGS2. I'm surprised nobody has mentioned this to the OP, so I'm starting to wonder if I misunderstood something?
Sent from my SGH-I777 using xda app-developers app
wgoldfarb said:
I have read several times that you should not use ROM manager on the SGS2. I'm surprised nobody has mentioned this to the OP, so I'm starting to wonder if I misunderstood something?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
No, ROM manager is still one of the worst things you could use on an I777. Stay away from it. I believe OP realized his mistake after the fact, he included it so that others could better answer his question and help him get his phone up and running again.
ZeroIsntTheHero said:
The title was more helpful than your response.
Click to expand...
Click to collapse
No. Just no. Titles like that (no offense to op he said in the future he'll name them more appropriately) don't help us help them. It just means we have to dig harder to help find what the problem is.
Sent from my SGH-I777 using Tapatalk 2