Can someone kindly tell me what's the problem?
I have an unlock AT&T Atrix and trying to update to 4.1.57 (now using 4.1.26), after I restore the webtop mod and run the script beforeupdate.bat and downloading the AT&T OTA update, the phone reboot and trying to update, but the update failed.
Finding update package…
Opening update package…
Verifying update package…
Installing update…
Verifying current system…
assert failed: _apply_patch_check("/system/app/DMService.odex", "c72a7fc8d1c7c1a523def6969dcaa67fa6aa08f8", "b8777a5be963f5cb029222f25c8afa6f384a932f")
E:Error in /cache/Blur_version.4.1.26.MB860.ATT.en.US.zip
(Status 7)
Installation aborted
btw, I have try to use the RSDLite 5.0 and try to flash the OLYFR_U4_1.2.6 sbf to my atrix, but it report "Failed flashing process. Phone[0000]hone did not re-enumerate after RAM-downloader was sent (0x703E): Phone connected.
P.S: sorry for my poor english
Sorry I think I should post this on the Q&A .... ><
Try to go into recovery and do factory reset then try to flash again to 4.1.26. I dont know what would cause the enumeration to fail. Im not experienced enough to know what would cause it to fail like that but Id be more that happy to help as much as I can.
Sent from my MB860 using XDA Premium App
Moved to proper forum
i have the same problem. Is there a solution?
Related
okay i had Rom Manager installed on my HTC Eris because i liked how easy it was to use on my DROID. My first BRICK came while in Clockwork recovery for eris. I had an error saying something like E: boot.img failure or something to do with the boot image. i proceeded to fastbot and attempt to update with original PB000IMG.zip. system failed to write as well as boot. After powering down the phone(i received a brick) no recovery no power indicator
my second came also while using clockwork recovery.im not accusing clockwork recovery of bricking my phone ( im lying DO NOT USE CLOCKWORK RECOVERY) but i am letting you know i lost two phones using it.
this time this is the result after flashing.
--installing: sdcard:update 2.1.zip
finding update package...
opening update package...installing update..
Delete files..
delete files..
formatting system..
copying files...
E: cant symlink /system/bin/cat
E:Failure at line 11:
symlink toolbox SYSTEM:bin/cat
installation aborted
so if anyone has any brick experiences please add to this post your experience along with detail of your process to get there
im guessing no ones had this problem before?
Re: E: cant symlink
I had this problem on clock work recovery and wasn't able to fix it had to get a me new phone
-------------------------------------
Sent via the XDA Tapatalk App
ok thanks i think im going to just sell the phone instead of trying to fix it, my MOTO Droid will be here tommorow :.
did verizon attempt to fix or did you just accept it as a loss?
bigslanki said:
ok thanks i think im going to just sell the phone instead of trying to fix it, my MOTO Droid will be here tommorow :.
did verizon attempt to fix or did you just accept it as a loss?
Click to expand...
Click to collapse
well I tried flashing the root rom see if that would work, when I did the system and boot.img failed to get flashed so when it tried to reboot it never turned back on at all.
I called them told them it wouldn't turn on and they sent me a new one.
ok thanks i think im going to just sell the phone instead of trying to fix it, my MOTO Droid will be here tommorow :.
did verizon attempt to fix or
Click to expand...
Click to collapse
well I tried flashing the root rom see if that would work, when I did the system and boot.img failed to get flashed so when it tried to reboot it never turned back on at all.
I called them told them it wouldn't turn on and they sent me a new one.
Click to expand...
Click to collapse
Yep that's way happened with my first Eris. ... I'm on BACK TO Droid now as you can see. Going to limit my flashing for now on.
-------------------------------------
Sent via the XDA Tapatalk App
bigslanki said:
okay i had Rom Manager installed on my HTC Eris because i liked how easy it was to use on my DROID. My first BRICK came while in Clockwork recovery for eris. I had an error saying something like E: boot.img failure or something to do with the boot image. i proceeded to fastbot and attempt to update with original PB000IMG.zip. system failed to write as well as boot. After powering down the phone(i received a brick) no recovery no power indicator
my second came also while using clockwork recovery.im not accusing clockwork recovery of bricking my phone ( im lying DO NOT USE CLOCKWORK RECOVERY) but i am letting you know i lost two phones using it.
this time this is the result after flashing.
--installing: sdcard:update 2.1.zip
finding update package...
opening update package...installing update..
Delete files..
delete files..
formatting system..
copying files...
E: cant symlink /system/bin/cat
E:Failure at line 11:
symlink toolbox SYSTEM:bin/cat
installation aborted
so if anyone has any brick experiences please add to this post your experience along with detail of your process to get there
Click to expand...
Click to collapse
You over reacted
jetmclean said:
You over reacted
Click to expand...
Click to collapse
You bumped an old thread
jetmclean said:
You over reacted
Click to expand...
Click to collapse
how so? stating my experience and providing details for other users?
Old news......
Keep in mind that I'm brand new at this so please don't just say "do this ____" and expect me to know what you're talking about .
I finally was able to root my new fascinate and flashed CWM. The ROM installation guide says if you're already rooted with CWM installed to simply reboot into recovery, wipe everything and flash. Only problem is, when I boot into recovery I am getting this error message.
-- Install from package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Can anyone tell me step by step what I need to do to solve this? Also I was assuming the camera button would work as the 'OK' or 'enter' button but it does nothing. Is one of the soft buttons used along with the volume rocker to select choices in recovery? I have some experience hacking my og Droid but this fascinate stuff is all greek to me.
With the help of google I think I figured out what was wrong, needed to flash something from odin to get it to work beforehand.
http://www.mydroidworld.com/forums/fascinate/4786-how-flash-clockwork-recovery-fascinate.html
Rebooting now, will let you all know if it worked.
I have definitely messed something up.. after flashing CWMRecovery.tar (used PDA, not phone) my phone just stays in a bootloop now. I can get into stock recovery but reboot now and the apply option do nothing but throw out error messages. I'm pretty sure it's hosed so I'm going through the steps to flash it through odin back to stock. Can anyone explain to me what exactly I did wrong here?
It may help if you give details... what rom did you flash? What kernel? This could help us help you.
Sent from my SCH-I500 using XDA App
Shakes The AssClown said:
It may help if you give details... what rom did you flash? What kernel? This could help us help you.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I second this, from previous personal experiences with this it sounds like something has gone wrong with your odin/flashing or you may be using old/outdated/corrupt files.. if you could tell us what you are odin-ing/flashing and exactly how you're doing it we can give you specific answers
tapatalked from my KangBanged Fascinate
Ok peeps, completed S-off successfully and have Revolutionary CWM v4.0.1.4 as my recovery. Almost there and when I went to install su-2.3.6.3-efgh-signed.zip for ROOT, I received the following:
Installing: /sdcard/su-.3.6.2-efgh-signed.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/su-2.3.6.3-efgh-signed.zip
(bad)
Installation aborted.
Can anyone shed some light to my current situation? Thank you in advance.
I had the same thing happen the first time that I tried. I just retried and it we through the second time. If it doesn't work when you retry, try deleting it from your sd card, then redownloading it, and try it all over. you might have gotten an incomplete file
You have a good one you could send me in case that is the problem?
Sent from my PG86100 using XDA App
youre alright bro, just flash this one and you'll be all set...http://dl.dropbox.com/u/36719158/su-2.3.6.3-efgh-signed.zip
Odds are you had one that wasnt properly signed, youre 98% done!
Hello and thanks for any help.
I softbricked my phone trying to install the OTA, so in an attempt to recover, I ran Razr util 1.82, selected option 1, and let it install. Then, while in recovery, I attempted to install the full JB update, and get the following error message:
Verifying current system...
assert failed: apply_patch_check("EMMC:boot:8388608:46b1d867743b5 a4db403dc2cd67a124cbd2b2173:8388608:7abc93a
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Anyone have any experience with this error? I've tried to troubleshoot the JB package and downloaded 3 different .zip's - has not changed or solved the problem.
Currently without a phone and hoping my phone is still salvageable! Any advice?
positivehxcgo said:
Hello and thanks for any help.
I softbricked my phone trying to install the OTA, so in an attempt to recover, I ran Razr util 1.82, selected option 1, and let it install. Then, while in recovery, I attempted to install the full JB update, and get the following error message:
Verifying current system...
assert failed: apply_patch_check("EMMC:boot:8388608:46b1d867743b5 a4db403dc2cd67a124cbd2b2173:8388608:7abc93a
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Anyone have any experience with this error? I've tried to troubleshoot the JB package and downloaded 3 different .zip's - has not changed or solved the problem.
Currently without a phone and hoping my phone is still salvageable! Any advice?
Click to expand...
Click to collapse
reflash the firmware and flash the ota
EDIT: make sure you are on the same firmware
I actually stumbled upon the 4.1.2 fastboot files...
http://sbf.droid-developers.org/cdma_spyder/list.php
Looks like a fresh release?? I just flashed it an it's currently in the device setup phase!
What is your system version .. Upload a screenshoot of ya about phone so we can try somtjing.
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
positivehxcgo said:
I actually stumbled upon the 4.1.2 fastboot files...
http://sbf.droid-developers.org/cdma_spyder/list.php
Looks like a fresh release?? I just flashed it an it's currently in the device setup phase!
Click to expand...
Click to collapse
Did it work for you? I was up the same creek haha, I'm downloading the new fastboot files now...fingers crossed
EDIT: My signature verification failed...any clues?
if you're on ICS then use this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
Gus194 said:
if you're on ICS then use this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
Click to expand...
Click to collapse
Can't believe I didn't see this.......if this works, I love you haha
EDIT: I love you haha, thanks!!!!
mrl515 said:
Can't believe I didn't see this.......if this works, I love you haha
EDIT: I love you haha, thanks!!!!
Click to expand...
Click to collapse
No problem.
Need help peazessss!
positivehxcgo said:
Hello and thanks for any help.
I softbricked my phone trying to install the OTA, so in an attempt to recover, I ran Razr util 1.82, selected option 1, and let it install. Then, while in recovery, I attempted to install the full JB update, and get the following error message:
Verifying current system...
assert failed: apply_patch_check("EMMC:boot:8388608:46b1d867743b5 a4db403dc2cd67a124cbd2b2173:8388608:7abc93a
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Anyone have any experience with this error? I've tried to troubleshoot the JB package and downloaded 3 different .zip's - has not changed or solved the problem.
Currently without a phone and hoping my phone is still salvageable! Any advice?
Click to expand...
Click to collapse
so im having a problem with this issue too. i followed all the instructions as it was stated. when i get to number 10. i get a status 7 error. any hope of surviving this brick? could it be a bad download of the blur? im new too any phone fixing but it says E: Error in /tmp/sideload/package.zip
NVM i found the solution , try this video youtube.com/watch?v=z9lPw5Lxpx4
I have rooted stock LS990 on ZV8. I got the OTA upgrade to ZVA, but it would not install with an error. I am getting the same error also via ADB or SD-Card:
"/system/bin/install-recovery.sh" has unexpected contents.
Error in /sideload/package.zip
(status 7)
Installation aborted
Not sure what is wrong with either that package or my G3?
If anyone has applied this update without problems, please let me know. I want to know if something is not right with my device.
OM
ObviousMan said:
I have rooted stock LS990 on ZV8. I got the OTA upgrade to ZVA, but it would not install with an error. I am getting the same error also via ADB or SD-Card:
"/system/bin/install-recovery.sh" has unexpected contents.
Error in /sideload/package.zip
(status 7)
Installation aborted
Not sure what is wrong with either that package or my G3?
If anyone has applied this update without problems, please let me know. I want to know if something is not right with my device.
OM
Click to expand...
Click to collapse
You have to have stock recovery to use the update.zip. do you have twrp?
Sent from my LGLS990 using XDA Free mobile app
Jimmy50941 said:
You have to have stock recovery to use the update.zip. do you have twrp?
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Everything is stock. No custom recoveries, no custom rom. It is just rooted. When ZV8 OTA came it installed just fine.
OM