Related
Hey, I'm on rogers in Canada and was having a hell of a time getting rooted 2.3.3 on my phone without unlocking the bootloader(no point in unlocking the BL for just root .... especially w/the warranty problems). I figured I'd give Working Root on 2.3.3 ! a try but had trouble finding the right firmware to downgrade to and when I tried to update OTA it kept failing after downloading and trying to install it (looked like it went all the way through the process but the phone would reboot and say "update failed").
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf (it's .184) with flashtool and then re-setup my apns to get 3g etc working. I downloaded the generic ftf off a thread on these forums but couldn't remember exactly which thread so I recompressed it and uploaded it to multiupload to make it a little easier to get all the needed files
2./ Rooted with Chainfire's Gingerbreak apk
3./ OTA update and it worked (before I did a clean install I was having the ota update fail, probably because I had removed a few system apps via root uninstall, I just made sure that all I did this time after the fresh install was root and then update)
Note on Gingerbreak: I've seen this exploit take 5 minutes or a few hours to grant root on devices. Be patient, if it's still hasn't worked try re-seating or swapping your memory card for a different one and try again. Also be sure you're on 2.3.2, SE patched gingerbreak in their release of 2.3.3.
[FAQ]
1./ I don't have ota updates available in my country, will this still work for me?
Answer: Yes, this installs the global firmware to your phone, after that your phone will look for global updates rather than carrier specific updates.
2./
nelly_boy said:
I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
Click to expand...
Click to collapse
Answer
step 1./ google your carriers apn settings
step 2./ enter them in settings/wireless & networks/mobile network settings/Access Point Names (make sure you set up your mms apn if you want working mms as well, info for your carrier is available on google, that's where I found mine.)
step 3./ Profit
ncaissie said:
Yes you can use wi-fi. and Like I said OTA is safe it is the PC update that bricks.
Just follow those steps. It's easier than I expected.
Edit:
The things not mentioned in the OP is that you need to download a file manager to install the Gingerbreak. And you need to enable the “Unknown Sources” in the apps settings to install Gingerbreak.
After it roots it will reboot and you should see a new app called Superuser in your app list.
Then get Titanium Backup to uninstall thing you don’t want or move apps fully to the SD card. If you are not in the UK the BBC player is no good to you. I think there is a thread with a list of apps you can safely remove
Click to expand...
Click to collapse
thanks just to clarify.
We can use a rogers branded xperia play and flash the uk firmware? will it not mess up anything?
RacecarBMW said:
thanks just to clarify.
We can use a rogers branded xperia play and flash the uk firmware? will it not mess up anything?
Click to expand...
Click to collapse
Not at all. You just have to re-setup your apn settings.
I'm using a Rogers Play on the UK firmware on a Bell sim card
Thanks for that man I'm gonna give it a go right now
update: hells yea boy! it worked! it worked! rooted 2.3.3!!!!!!!
Sent from my R800i using XDA App
Willis111 said:
Hey, I'm on rogers in Canada and was having a hell of a time getting rooted 2.3.3 on my phone without unlocking the bootloader. I figured I'd give Working Root on 2.3.3 ! a try but had trouble finding the right firmware to downgrade to and when I tried to update OTA it kept failing after downloading and trying to install it (looked like it went all the way through the process but the phone would reboot and say "update failed").
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf with flashtool and then re-setup my apns to get 3g etc working. I downloaded the generic ftf off a thread on these forums but couldn't remember exactly which thread so I recompressed it and uploaded it to multiupload to make it a little easier to get all the needed files
2./ Rooted with Chainfire's Gingerbreak apk
3./ OTA update and it worked (before I did a clean install I was having the ota update fail, probably because I had removed a few system apps via root uninstall, I just made sure that all I did this time after the fresh install was root and then update)
Click to expand...
Click to collapse
You beat me to the punch , I was gonna try that last night but was having connect to network problems.
@Emann56 - Was still your idea, just figured I'd try it with a fresh install of a different firmware and post my epic results. All thanks goes to you and whoever helped with your thread ofc and especially Chainfire!
thatsupnow said:
Thanks for that man I'm gonna give it a go right now
update: hells yea boy! it worked! it worked! rooted 2.3.3!!!!!!!
Sent from my R800i using XDA App
Click to expand...
Click to collapse
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Will this work in the Netherlands or will there be no OTA update available?
Willis111 said:
@Emann56 - Was still your idea, just figured I'd try it with a fresh install of a different firmware and post my epic results. All thanks goes to you and whoever helped with your thread ofc and especially Chainfire!
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Click to expand...
Click to collapse
Yea man I had cm 6.1.3 on my x10 and I loved it! Already loving the rooted 2.3.3!
Sent from my R800i using XDA App
awoken said:
Will this work in the Netherlands or will there be no OTA update available?
Click to expand...
Click to collapse
You would have to find that out for yourself, it's in settings/about phone/Software Update/Update Now. If this says no updates available then I guess OTA updates aren't available in that region at the moment.
Willis111 said:
That was my reaction too Still can't wait for CM7 on this puppy though tbh.
Click to expand...
Click to collapse
Oh god yes please. I miss my power control in notification and the screen on/off animations
thanks ma man worked like a champ.
awoken said:
Will this work in the Netherlands or will there be no OTA update available?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14690329&postcount=29
that's what I think, basically your phone will stop asking for Netherlands ota updates and search the net for UK updates.
Willis111 said:
http://forum.xda-developers.com/showpost.php?p=14690329&postcount=29
that's what I think, basically your phone will stop asking for Netherlands ota updates and search the net for UK updates.
Click to expand...
Click to collapse
Willis111 is right, I performed the process here in the US today and no troubles finding the OTA update, despite the message there was no OTA before I flashed to .184 UK generic. Should work for you as well.
axiomjunglist said:
Willis111 is right, I performed the process here in the US today and no troubles finding the OTA update, despite the message there was no OTA before I flashed to .184 UK generic. Should work for you as well.
Click to expand...
Click to collapse
Thanks for confirming
Thanks for the thread. Just one question. I'm on 2.3.3 (no root) and dont want to wait longer for a working 2.3.3 GingerBreak. But i want to keep all my apps/settings. Can i downgrade to .184 UK generic without losing all my data?
Edit:
Another question:
1./ Did a clean install of the Xperia_Play_Release_Generic_UK.ftf with flashtool and then re-setup my apns to get 3g etc working.
Click to expand...
Click to collapse
If i dont do a clean install...what about the apns? Will they stay too? In my own thread:
http://forum.xda-developers.com/showpost.php?p=14705145&postcount=4
FrAsErTaG said that i can choose to not flash the userdata. I already found the option within the Flashtool. Are my apns a part of the userdata or will they get overwritten/deleted anyway?
Edit: Forget everything. It worked
I didnt wipe anything or "clean" my system. I just did the downgrade. After that, i got 1 issue. I always got this message: "android.process.acore has stopped". Google said that this is an issue with synchronize the contacts, etc. But i didnt freak out I just installed GingerBreak, did the root, then the OTA, and after OTA everything was fine again. Now i have full rooted 2.3.3
Willis111 said:
Thanks for confirming
Click to expand...
Click to collapse
Happy it works!
Thanks for the info, I can confirm that this procedure worked for me as well. I'm now running v2.3.3 Rooted with a locked bootloader on my originally locked R800a from Rogers!
How do you do an OTA update on Rogers if it is not here yet?
ncaissie said:
How do you do an OTA update on Rogers if it is not here yet?
Click to expand...
Click to collapse
My XPlay was originally purchased from Rogers. But since I've had it, I unlocked its network, flashed it with the Generic UK .184 firmware and Rooted it with GingerBreak v1.20. When I checked under "Settings\About phone\Software update\" and manually searched for an update, it was able to find it, download it and install it.
Sweet, Thanks
I did not see any message whether we could still do it.
peare said:
I did not see any message whether we could still do it.
Click to expand...
Click to collapse
I had no problems rooting after the TW update. I installed the 3.2M update while rooted without problems as well.
Omate today told that the new firmware update is available by OTA update. But, I checked this update and I did not found anything. If my device is rooted can i still able to received updates or this is the Problem? Also, can I make unroot to able to Update? Any one have to advice
I'm on stock
elsabea said:
Omate today told that the new firmware update is available by OTA update. But, I checked this update and I did not found anything. If my device is rooted can i still able to received updates or this is the Problem? Also, can I make unroot to able to Update? Any one have to advice
Click to expand...
Click to collapse
I haven't rooted and I could download and apply the OTA fine, so it would appear that rooting prevents OTA!
andreasmartens said:
I haven't rooted and I could download and apply the OTA fine, so it would appear that rooting prevents OTA!
Click to expand...
Click to collapse
I install application called OTA ROOT KEEPER which allow me to unroot the device and re root again, but also nothing happens after unroot it
Why don't you check threads before you open new one?!
I opened one and we said everything there...
Sent from my D6503 using Tapatalk
Just a heads up, the new OTA that At&t released has an updated bootloader.
VenomMOD said:
Just a heads up, the new OTA that At&t released has an updated bootloader.
Click to expand...
Click to collapse
Why didn't att just play nice and update to V3? Instead they update To V4 so I can't flip flop between t-mobile firmware and there's. Does root still work? On the other hand, I can flash Verizon firmware I guess.
Ph0nysk1nk said:
Why didn't att just play nice and update to V3? Instead they update To V4 so I can't flip flop between t-mobile firmware and there's. Does root still work? On the other hand, I can flash Verizon firmware I guess.
Click to expand...
Click to collapse
I haven't attempted rooting it, and I won't be. There might be a small chance that it may work but I'm not sure.
VenomMOD said:
I haven't attempted rooting it, and I won't be. There might be a small chance that it may work but I'm not sure.
Click to expand...
Click to collapse
Well ... if root doesn't work I know what my next firmware will be. (Tmobile)
I can't root, looks like it's back to the drawing board. It figures this happen as soon as I feel it necessary to root my device......
I advise everyone to not take any OTAs after the first August patch so you can still be able to root and flash roms. It isn't a problem for me since I wasn't planning on rooting this phone again anyways..
VenomMOD said:
I advise everyone to not take any OTAs after the first August patch so you can still be able to root and flash roms. It's sad to see this happen, but it isn't a problem for me since I wasn't planning on rooting this phone again anyways..
Click to expand...
Click to collapse
Pretty sure the eng boot will still work on the new BL, just no old ROMs. :^)
MFW just read those posts above me.
raremind said:
I can't root, looks like it's back to the drawing board. It figures this happen as soon as I feel it necessary to root my device......
Click to expand...
Click to collapse
Did you use the engboot root method?
SkyAttacksX said:
Pretty sure the eng boot will still work on the new BL, just no old ROMs. :^)
MFW just read those posts above me.
Click to expand...
Click to collapse
@raremind couldn't root on BL4. It's unfortunate how we can't root on API2, but if the developers are willing to find out a new way to gain root access on API2, then it wouldn't be the end of the world for anyone who wants the latest OTA but still want root.
Can someone post link to download latest update
sandeep.manugunta said:
Can someone post link to download latest update
Click to expand...
Click to collapse
I took the OTA to get the latest version, so unfortunately I don't have the actual firmware link.
Ph0nysk1nk said:
Why didn't att just play nice and update to V3? Instead they update To V4 so I can't flip flop between t-mobile firmware and there's. Does root still work? On the other hand, I can flash Verizon firmware I guess.
Click to expand...
Click to collapse
Tmobile also updated their firmware to V4 with the recent update from 9/27
http://www.sammobile.com/firmwares/database/SM-G930T/
I covered this here: http://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281
Can the U firmware still be flashed?
No, it cant.
joe3681 said:
Can the U firmware still be flashed?
No, it cant.
Click to expand...
Click to collapse
No one can until the U firmware is updated to bootloader 4.
VenomMOD said:
No one can until the U firmware is updated to bootloader 4.
Click to expand...
Click to collapse
Yeahhh, thought I'd give it a go
G930U firmware was just updated to API3 which has the incremented bootloader, so the individuals who updated to the latest AT&T firmware can use U firmware now. :victory:
EDIT: Here is @joe3681 's thread that has the download to the firmware.
http://forum.xda-developers.com/att...4api3-firmware-download-t3481159#post69147585
>Update: Links were taken down.
Got a new Update to B35
why does the US version get so many updates? in europe still on marshmallow.Anyway great progress from zte team
Predatorhaze said:
why does the US version get so many updates? in europe still on marshmallow.Anyway great progress from zte team
Click to expand...
Click to collapse
European version on MM? No ! It was updated to Noughat long back. If u want US Os, just flash it on G Model with the help of tutorials.
Predatorhaze said:
why does the US version get so many updates? in europe still on marshmallow.Anyway great progress from zte team
Click to expand...
Click to collapse
The OTA system is completely broken. EU phones have had 9 Nougat updates already. just get to marshmallow B11, then update to Nougat B09
A quick question from being new to the Axon 7, will this relock my bootloader, and or will I lose my ability to root? I'm on B32, but downgraded bootloader with toolkit, and am rooted with SuperSU. I am loving my Axon 7, having had it 1 month. Previous phone was a POS Sony xperia z4, and the Axon blows it away.
davisml said:
A quick question from being new to the Axon 7, will this relock my bootloader, and or will I lose my ability to root? I'm on B32, but downgraded bootloader with toolkit, and am rooted with SuperSU. I am loving my Axon 7, having had it 1 month. Previous phone was a POS Sony xperia z4, and the Axon blows it away.
Click to expand...
Click to collapse
No, and never lock it. You'll end up with a brick if you ever lock the bootloader without getting the phone completely functional and 100% stock (recovery, system)
Thankyou, I never intend to or want it locked. So I assume all I'll have to do after the update is re-flash superSU?:good:
Choose an username... said:
The OTA system is completely broken. EU phones have had 9 Nougat updates already. just get to marshmallow B11, then update to Nougat B09
Click to expand...
Click to collapse
I never had any update notification on stock MM A2017G.I have to look for updates myself navigating on ZTE support site.
Predatorhaze said:
I never had any update notification on stock MM A2017G.I have to look for updates myself navigating on ZTE support site.
Click to expand...
Click to collapse
Again. The OTA system is completely broken.
Just take an official zip from the Download Center. It's there for a reason you know
Other than the security patches, seems like a very light update. Does anyone have it yet? Are the improvements mostly under the hood or is there anything actually noticable?
I'm mostly looking forward to Oreo and hopefully fixing the metadata Bluetooth problem.
Nothing noticeable. Updated security patch to December.
As someone that uses auto night light. It is broken now. It is no longer automatic at least with boot password. Have not tried without yet.
If i'm rooted and bootloader unlocked what will happen if I accept the update?
KyJelly69 said:
If i'm rooted and bootloader unlocked what will happen if I accept the update?
Click to expand...
Click to collapse
Try it
reV17 said:
Try it
Click to expand...
Click to collapse
no
KyJelly69 said:
no
Click to expand...
Click to collapse
I'm kidding, the worst that would happen is that it would reboot to recovery and not flash
reV17 said:
I'm kidding, the worst that would happen is that it would reboot to recovery and not flash
Click to expand...
Click to collapse
That's exactly what would happen. But no real harm other than your wasted time and bandwidth.
Follow up to my previous post. Even with boot password off. Auto Night Light still broken.
Night light
Spydyr said:
Follow up to my previous post. Even with boot password off. Auto Night Light still broken.
Click to expand...
Click to collapse
In settings my A2017U says night light will never turn on automatically. C.F.Lumin by Chainfire has been my go to for years. It will work without root also.
patio54 said:
In settings my A2017U says night light will never turn on automatically. C.F.Lumin by Chainfire has been my go to for years. It will work without root also.
Click to expand...
Click to collapse
I installed it. Turned GPS on high accuracy. Stock auto night light started work. To confirm I uninstalled C.F. Lumen and it is still working. TBH I forgot all about C.F. Lumen as I run it on my tablet.