I'm using bb 52 wolfbreak rom v6, but I cant sent more than 1 message length, it keep giving me error.
Is it baseband problem or rom problem, will changing to 54,55,58 solve the problem?
If I want to change, do i just flash the bb? Will it cause fc?
Yea those basebrands you named are the required basebrands for wolfs ROM and should fix your problem. You flash it via flashtool. Make sure you dont wipe user data when you flash the new basebrand.
Edit: Also make a backup of your ROM just in case
I have bb .52 but my rom is freex10 and i dont have this problem, so it's problem with rom or you have skme error when flashing rom, try flash rom again and try send sms if not help try change baseband but i think it isn't problem
Last time i was on bb.54 wolfbreak rom v5, I can only send 2message length max, now bb52 wolfbreak rom v6 only 1 message length, and I always can't receive my friend long text.
gohwh1 said:
Last time i was on bb.54 wolfbreak rom v5, I can only send 2message length max, now bb52 wolfbreak rom v6 only 1 message length, and I always can't receive my friend long text.
Click to expand...
Click to collapse
I haven't had any issue sending or recieving long msgs on WBs ROM on .58 BB but baseband shouldn't affect it I wouldn't think.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
I haven't had any issue sending or recieving long msgs on WBs ROM on .58 BB but baseband shouldn't affect it I wouldn't think.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
I reinstall the rom and flash bb 58 but the most it can send is 2 message length. Whenever I send 3 message length, it never say error but the receiver cannot receive the message and I try to sent a 1 message length but it's like stuck, force close doesnt help, have to reboot the phone.
I have problem receiving even short sms too, but when my friend resend then I can receive.
Related
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
kenzes said:
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
Click to expand...
Click to collapse
Use baseband .49.
Thank you PlayGunsta! I will flash my baseband back to 2.0.49 and will report this back..... Maybe some of others had this problem also. This could help others
kenzes said:
Thank you PlayGunsta! I will flash my baseband back to 2.0.49 and will report this back..... Maybe some of others had this problem also. This could help others
Click to expand...
Click to collapse
If you did read the MIUI thread of Trip good, you would see he is recommending baseband .49.
Succes, and report progress buddy.
I have also had a lot of reboots with trips rom, but after a while when the cache is populated it settles down. To sum it up. Whenever I install a new application or use something I have not used before (market, mail client, etc) it will reboot after a little while (this is especially noticeable for apps that uses any form of communication). But after the first reboot/app I have not been noticing a lot of reboots.
bablefish69 said:
I have also had a lot of reboots with trips rom, but after a while when the cache is populated it settles down. To sum it up. Whenever I install a new application or use something I have not used before (market, mail client, etc) it will reboot after a little while (this is especially noticeable for apps that uses any form of communication). But after the first reboot/app I have not been noticing a lot of reboots.
Click to expand...
Click to collapse
What baseband r u on with this Trip ROM?
I'm on .49 but it still reboots very much.
Wiped everything, clean install baseband .49 still lots of reboots. Cant download any app from market. It reboots.
hey guyz, i tried using the flashtool to flash the 0.49 baseband but it never seems to work for me. first i flash the X10a_2.1update1_r2.1.A.0.435_Generic.ftf which comes with .54 baseband. then i used xrecovery to install miui 1.0.5. i know it says we need .49 or .52 baseband but i cant get to flash it. it flashes and at the end u get msg saying unplug device, turn on debug and i chek the baseband, it says unknown. please help me get baseband .49 on my x10.
kenzes said:
I don't understand why my X10i BB 2.1.54 currently running MIUI 0.3.1 ROM from Trip gave me soooo much reboots.
I gave my X10i re-flashed about 5 times already and still had no luck to get a rid of this. It caused random reboots while I was using wifi or edge / gprs.
PLEASE ADVICE!!!
Click to expand...
Click to collapse
I'm also experiencing the same rebooting problem. Has anyone found a downlink link and flash instructions for bb 49?
PLEASE HELP ;o)
I am running CM 6.1.3 on my x10i
Sometimes when the phone is locked and I get a call the phone is ringing but when I unlock it the answering window does not show I am just taken to the lock screen.
and the annoying thing is that the phone doesn't stop ringing oO lol and I have to reboot the phone everytime
Which cm 6.1.3 ROM r u running? Who makes it? That will help us here determine the problem better.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
http://forum.xda-developers.com/showthread.php?t=945264
I am using that one with the latest update
and forgot to mention I randomly get an error sometimes saying there was a call log failure and it was force closed (next time I get it I will copy the message I get)
U shouldnt have that issue at all. Try reflashing the rom by xrecovery with clearing phone memory, all caches, and battery stats. If that doesnt work, let me u mite have to reflash the se firmware from flashtool or seus and reroot and start over with flashing ROMS.
Lets start first with the xrecovery way first.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Too much work :S xD I have to download all my apps again xD don't feel like doing it yet
I will eventually when it gets really annoying it didn't happen over the last 3 days so
Offcourse you dont have to download all your apps again Just back them up with titanium backup or mybackup
Sent from my X10i using XDA App
Recently i flashed few roms i tried many to check which one suits me best.I finnaly found the one tha suits me and its cynm 7 i am pretty sure now i cant make Mobile Internet working at all while wi fi,and other seevices work correctly could it be due baseband? I am using .58 baseband. Any help is appriciated ;-) ty
Sent from my X10i using XDA App
I had a similar problem when reflashing an official firmware after I had used FreeX10 beta 4, I finally got my browser working again by flashing a generic 2.0.A.0.504 firmware and not updating. The baseband I have now is 2.0.46 as opposed to 2.1.54. It might be the problem but I'm in no position to say so, I only know from my experience that this solved my connection issue.
I haven't flashed another firmware over it but I'm a little bit hesitant to do so at this point. I'd rather have internet access then a newer firmware.
There is one problem i can't find that firmware anymore or link has expires or so on :/ i flashed baseband .58 and i have got my web working very well :/ so i dunno might check and reflash everything again Thanks anyway!
I've had the same problem. It's most probably due to the APN not being set up. Go to your providers website, and find APN configurations. Then go to the APN settings in the wirelles & connection settings. Create a new APN using the settings on your provider's website
I know settings my self allready it worked on previous roms... but from now on it just cant work on any rom dunno why :/
I agree, it could be a baseband mismatch. Certain roms need certain basebands (I know for example that TripNRaVeR's need bb 2.0.49 or 2.0.52, but FreeX10 (that I used to use) needs 2.1.54 or 2.1.55.
What you might wanna do is check out the Baseband Collectionhttp://forum.xda-developers.com/showthread.php?t=960527, grab them all, and try them, one at a time, until you get a match.
Don't forget to back up your phone - I didn't, and lost all my sms messages (bad me).
Read the ROM thread. CM7 is Gingerbread, all GB ROMs currently available use 49/52 BB. Dont just try them all, just use the one the instructions say.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CM7 doesn't require a baseband 58.... Try flashing some other baseband like 2.1.54
Nope :-( still none works :/ damn!
Hello peeps. I think there are many confused people out here, that does not completely understans HOW TO make the kernel work.
And I am one of them, tried lots of stuffs but Im getting crazy now, and desperate (lol). Is there any1 out there, willing to make the first step by step (not way to easy, just like, install this and this lalal in correct order).
I am using WolfBreaks rom, bb.54 and Ive run into a constant boot loop.
This is how I did. I installed Baseband Patch for 4x-52 over my current bb.54.
After that I installed the K010, all this through xrecovery ofcourse, but I still end up in a endless bootloop.
What have I done wrong? Please make us a simple guide to follow, to make sure there is nothing incorrect.
Freak174 said:
Hello peeps. I think there are many confused people out here, that does not completely understans HOW TO make the kernel work.
And I am one of them, tried lots of stuffs but Im getting crazy now, and desperate (lol). Is there any1 out there, willing to make the first step by step (not way to easy, just like, install this and this lalal in correct order).
I am using WolfBreaks rom, bb.54 and Ive run into a constant boot loop.
This is how I did. I installed Baseband Patch for 4x-52 over my current bb.54.
After that I installed the K010, all this through xrecovery ofcourse, but I still end up in a endless bootloop.
What have I done wrong? Please make us a simple guide to follow, to make sure there is nothing incorrect.
Click to expand...
Click to collapse
If you're already on bb54, you don't need to install patch bb4x-52. The patch is only for people that on bb49/52. That is why you are having bootloops.
tot31 said:
If you're already on bb54, you don't need to install patch bb4x-52. The patch is only for people that on bb49/52. That is why you are having bootloops.
Click to expand...
Click to collapse
So with other words I can install the k010 without any patches or anything if I am on bb54?
Freak174 said:
So with other words I can install the k010 without any patches or anything if I am on bb54?
Click to expand...
Click to collapse
yes, first you install WB CM6 rom then the kernel.
tot31 said:
yes, first you install WB CM6 rom then the kernel.
Click to expand...
Click to collapse
Thank you, so if I choose to be on bb 52 THEN I need to install the patch, correct?
after install kernal
how can back to stock kernal ?
2. is installing kernal , wipe evrything(app and data) or not?
Freak174 said:
Thank you, so if I choose to be on bb 52 THEN I need to install the patch, correct?
Click to expand...
Click to collapse
that is correct.
psharifi.3746 said:
after install kernal
how can back to stock kernal ?
2. is installing kernal , wipe evrything(app and data) or not?
Click to expand...
Click to collapse
Q1.
A : There are a few people has made patch file to go back to stock kernel in the dev section. There's a kernel manager script written by doomlord.
Q2.
A : the wipe everything is done before you install the rom, then after that install the kernel.
Well this time it got better, I could enter the startup with the keylock and then the phone rebooted. Afterwards it kept bootlooping for like 10 minutes. Going to try the xbin file instead of bin
edit: with the xbin I could atleast slide the unlock ****, going to leet it reboot some times and see what happens!
I get a blue/white led colour then the screen freezez up and get dark, after a couple of sec it reboots
Freak174 said:
Well this time it got better, I could enter the startup with the keylock and then the phone rebooted. Afterwards it kept bootlooping for like 10 minutes. Going to try the xbin file instead of bin
edit: with the xbin I could atleast slide the unlock ****, going to leet it reboot some times and see what happens!
I get a blue/white led colour then the screen freezez up and get dark, after a couple of sec it reboots
Click to expand...
Click to collapse
WB CM6 has not been confirm or guarantee to work with custom kernel, as he said that his rom works only on stock bb54.
I join ur request.. i also wanted to flash wolf's ROM.. but i'm kinda confused about the kernel.. i'm running stock 2.1 and BB .54
Custom kernels are all built for 49/52 BB. If you want to use the kernel with WBs ROM you need to flash 52 BB and then the patch. The patches work for the ROM not the kernel, the kernel is dependant on right BB.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
Custom kernels are all built for 49/52 BB. If you want to use the kernel with WBs ROM you need to flash 52 BB and then the patch. The patches work for the ROM not the kernel, the kernel is dependant on right BB.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Tried this, I flashed bb. 52 then installed the patch, and after that the kernel but still endless bootloops :/
Freak174 said:
Tried this, I flashed bb. 52 then installed the patch, and after that the kernel but still endless bootloops :/
Click to expand...
Click to collapse
Hi, make sure you start with a working rom, flash bb52, flash the bb patch "cmbb49.zip" and then the kernel files.
It should work without problems.
Cheers.
i got my bluetooth error.. the problem is cant pairing to other device..and sent or receive file.
but my phone or other phone,can see bluetooth device each other.
i use stock GB 2.3.4 fw 42,xperia mini,rage kernel v.3.
anyone can help me?
sorry for bad english
FajarHopuzz said:
i got my bluetooth error.. the problem is cant pairing to other device..and sent or receive file.
but my phone or other phone,can see bluetooth device each other.
i use stock GB 2.3.4 fw 42,xperia mini,rage kernel v.3.
anyone can help me?
sorry for bad english
Click to expand...
Click to collapse
Try flashing some custom roms you"ll easily find some in this forum..............
jesudas said:
Try flashing some custom roms you"ll easily find some in this forum..............
Click to expand...
Click to collapse
is there any method to fix this without flash other rom??
im personally like stock rom.. its minim of bug..
I see you have Rage Kernel, so you have rooted your phone.
Have you removed any system apps at all?
Or done any modifications to the ROM, other that custom kernel?
What phone is the other one, you are trying to pair with? Does it happen with all other phones or only some?
I have 2 Xperia phones, both running .62 and both can send/receive via Bluetooth,
Why still runnin on .42? It's ok to prefer stock but at least update to latest .62 version!