Related
Hey guys, can anyone help me out here?
I downloaded and installed My Free X10 Beta 4.. I'm pretty sure I did everything properly but it left me with one problem, it wasn't letting me enter the SIM card pin and therefore wouldn't receive signal, causing it to reboot constantly..
I've tried changing the SIM lock on startup off but to no avail - I only get errors..
Since nothing else is working I want to downgrade back down to the Stock 2.1 version, can anybody help me? Much appreciated, thanks.
If u made a backup before u did the flash then u can restore the backup but u probably didn't lol... so u have to flash 2.1 Alltel over again
Sent from my X10i using XDA App
Actually I did, using the Backup and Restore app thingy, how do I restore it from there? Thanks!
If you used the SE backup and restore app then that won't be any use - it only backs up content, not Firmware..
Your best course of action is probably to try doing a repair using SEUS, or use flashtool to flash a standard SE ROM.
You know I was considering trying out Titanium Backup.. Too late now!
So I should just trying update in SEUS as normal and see what happens from there?
Sorry I'm such a noob. -.-
Yes - plug into SEUS and it will either say that you have the latest firmware, or will try to update your phone.. if it says that you have the latest firmware then you should be able to select the "repair" option...
If SEUS doesn't let you re-install the firmware then you'll need to reflash a standard ROM first.
Thanks for your help so far, you're a lifesaver
I'll try that now and get back to you when its done!
Ummmm. Not good, ran through SUES fine but its not working at all...
The phone starts up with the SE name and symbol then shuts down straight away?!
ChuckNorrisTheSecond said:
Ummmm. Not good, ran through SUES fine but its not working at all...
The phone starts up with the SE name and symbol then shuts down straight away?!
Click to expand...
Click to collapse
give it another flash using SEUS mate, occasionally there are problems when flashing a ROM.
If you are keen, you could use the flash tool that binary has posted. Pick the appropriate ROM package from his list, start the flasher batch file, restart the phone in flash mode and wait a few minutes.
binary's tool lives here - http://forum.xda-developers.com/showthread.php?t=825201 and another thread with more info is http://forum.xda-developers.com/showthread.php?p=10738467
Good luck and have patience - you cannot kill the x10 so it wont boot so you will be ok
Thanks mate, you've actually calmed me down now. It could be a late night but i'll figure this out.
Well if u had made that backup with xrecovery u would have been okay!
Sent from my X10i using XDA App
Go into the SEUS and use the repair function,It will reset the phone and give you the latest firmware.
Then use the XDA flash tool to re root it,Worked great for me
http://forum.xda-developers.com/showthread.php?t=965202
Sorry was away from the computer yesterday..
Well a new problem, the phone isn't staying on long enough to connect to SUES.. All the stuff in them other posts about Binary is going in one ear out the other, so to say.
Can you get into flash mode at all for SEUS?
If not, try taking the battery out, then connect the USB cable, hold down the back button, and replace the battery.
Beta 4 does not work on all devices
Hi,
in order to get back a working X10 just flash the beta3. I've had the same problem and flashed the beta3 (plus Google Applications) and afterwards it worked well
Regards
Stefan
Okay, all this stuff is confusing me, try talk in noobish terms I dont understand this flashing and stuff..
I'm upto the stage where I have the flasher, just how do I flash the software onto it? Thanks for your help so far guys..
Actually, ignore it, I managed to repair it with SUES and i'm back on 2.1 I think i'll think twice before installing Betas again! Cheers for all your help guys!!
Hello!
I got problem with my Xperia X10i, I don´t know what to do.
Just some few hours ago i installed:
[ROM] [29-07] TripNMiUI "Iris" 1.8.3 Froyo!
h t t p ://android.modaco.com/topic/342875-rom-29-07-tripnmiui-iris-183-froyo-heading-for-20/
And it worked perfect, But then after that i installed Free Kernel 3.63 with Xrecovery like the ROM with misstake..
Free Kernel 3.63
And now my phone wont work, It starts and works to the "lockscreen" but then after that a error message pops up and stands that the system process doesnt answer after i unlock and after that it restarts. And Xrecovery wont start after the "Sony Ericsson" text.
I dont know what to do, If my phone is broke or if this can be fixed!
But please can someone help me!? I would be Grateful forever! and sorry for my bad english!!!
- Have a great day!
Here is how you get back to 2.1
Go to this thread: http://forum.xda-developers.com/showthread.php?t=920746
Download the flash tool and the firmware you want and flash back to 2.1 and reinstall trip's miui rom.
Did you download the correct kernel for the rom you were using? http://forum.xda-developers.com/showthread.php?t=1112745 has 2 froyo kernels. One for froyo and one for Miui.
Good luck my friend
1. Try flashing a normal kernel via Flashtool, seeing if this is corrected
2. Reinstall xrecovery before FC ? via Flashtool
3. Reinstall via SEUS ?
How can install something when i cant get into Xrecovery or connect my phone to the computer? .. My phone only can charge. Or is it only me doing something wrong? .. Im pressing the back button when the "Sony Ericsson" Text is shown. I dont know what to do
Hadex94 said:
How can install something when i cant get into Xrecovery or connect my phone to the computer? .. My phone only can charge. Or is it only me doing something wrong? .. Im pressing the back button when the "Sony Ericsson" Text is shown. I dont know what to do
Click to expand...
Click to collapse
Again, go to this thread: http://forum.xda-developers.com/showthread.php?t=920746
Download the flashtool:http://www.multiupload.com/GYL7A7XQBT
and the 2.1 firmware:http://www.mediafire.com/?sqv6274anzfzn2x
Install the flashtool, put the firmware in the firmware folder and then follow the instructions in the thread.
This will wipe all your data and revert your phone back to 2.1. The flashtool can root and install xRecovery allowing you to install The miui rom again getting you back to where you were before you flashed the kernel.
Oh ok. ill try this! Thanks for the help. Sorry for understand directly.
Don't worry I just hope your phone gets up and running again soon!
hey guys, this is my first time i would say i bricked my phone. i need someone to help me my phone has been in 'coma' for nearly 2 days now.
so this happened when i try to apply this mod http://forum.xda-developers.com/showthread.php?t=1306044 and after i carelessly copied framework-res.apk to system/framework using root explorer without setting the correct permissions, my phone automatically shuts off and try to restart but it failed, it stucked on the big sony ericsson logo and 'sony ericsson' text.
i have pull out the battery hundred times and try to reboot my phone normally but it didnt worked it still stucked on the sony ericsson logo.
so can anyone help me please...
what tools/application should i get to fix this?
first of all, i dont want to wipe/lose/factory reset my phone memory data because that would make my phone contacts gone which i never ever want to happen. so please is it possible to backup my contacts somewhere else if wiping is the answer at least??
okay i took a lot of time to type this and hoping someone give me an answer
Hi, what is your model no? and you rooted it?
Sent from my ST15i using xda premium
i use sk17i mini pro as mentioned above and yes it is obviously rooted
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Someguyfromhell said:
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Click to expand...
Click to collapse
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Izzy Stinson said:
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Click to expand...
Click to collapse
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Someguyfromhell said:
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Click to expand...
Click to collapse
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Izzy Stinson said:
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Click to expand...
Click to collapse
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Someguyfromhell said:
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Click to expand...
Click to collapse
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Izzy Stinson said:
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Click to expand...
Click to collapse
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Someguyfromhell said:
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Click to expand...
Click to collapse
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Izzy Stinson said:
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Click to expand...
Click to collapse
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
You should probably get a backup app and backup your stuff or either root again and install CWM and backup that way
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
Well he forgot to tell you that the first boot after every new 'fresh' flash required a little time for the phone to boot because it create cache at the boot animation...
Sent from my SK17a using xda premium
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Actually, i think you could've salvaged your phone without the need of flashing it... If you had access to CWM, you could've put framework file into zip file and flash it with CWM. It helped me once when i got stuck in bootloop after failed installation of a mod
maso321 said:
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Click to expand...
Click to collapse
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
do you know where i may get the software from ?
WORKED LIKE A CHARM !! thank you attemp number 2!
---------- Post added at 11:53 PM ---------- Previous post was at 11:34 PM ----------
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
you my friend are a dangous man !! flashing it now thanks again i got the stock rom
Problem Resolved
I think that is a bootloop problem , you can try this method. It helps http://www.youtube.com/watch?v=v4nfePh0KQc&feature=plcp
I also had this same problem when installing hybrom v17 with lock bootloader and stock kernel. It helped me a lot. Hit thanks if I helped
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
C0ND01N said:
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
Click to expand...
Click to collapse
connect it to SEUS and flash back to stock rom. even i have the same issue
alienwrz said:
connect it to SEUS and flash back to stock rom. even i have the same issue
Click to expand...
Click to collapse
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
alienwrz said:
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
Click to expand...
Click to collapse
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
never flash under low battery... maintain atleast 50% of battery and then flash. i think the method i told dint work since u had low battery... charge it via wall socket and then try my method.
SmG67 said:
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
Click to expand...
Click to collapse
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I will try what u said as soon as I get home. If I save the device 'll try your suggestion Rom and kernel.
Thanks
Sent from my LT18i using xda app-developers app
alienwrz said:
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
Click to expand...
Click to collapse
I hope you chose flashmode when flashing and not fastboot?
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I flashed your ftf it flashed without an error but there isnt any Sony logo or something. It bright a bit and reboot again. What do you think guys?
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
C0ND01N said:
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
Click to expand...
Click to collapse
Do you get a red led when you try to power it on?
SmG67 said:
Do you get a red led when you try to power it on?
Click to expand...
Click to collapse
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
C0ND01N said:
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
Click to expand...
Click to collapse
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
SmG67 said:
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
Click to expand...
Click to collapse
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
C0ND01N said:
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
Click to expand...
Click to collapse
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
SmG67 said:
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
Click to expand...
Click to collapse
I connect to the wallcharger and try to power on but there isnt any Sony Ericson logo. its just 1 moment bright screen and some kind of reboot i guess. Then a bright screen and then dark.
Do you know what is the problem here?
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
arnes_king said:
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
Click to expand...
Click to collapse
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
mirost1 said:
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
Click to expand...
Click to collapse
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
arnes_king said:
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
Click to expand...
Click to collapse
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
mirost1 said:
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
Click to expand...
Click to collapse
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
arnes_king said:
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
Click to expand...
Click to collapse
Yeah buddy, its all in Sola section.