please help, i get constant reboots whatever custom kernels i tried to use... I want to test CM7 j020a k009... all customs kernels (k001 to k009) made by jerpelea have a issue of constant reboots on my phone... im on baseband 52
What ROM are you on?
im using android 2.3.3 roms (CM7 j020a)...
Tried this?
http://forum.xda-developers.com/showthread.php?t=1046609
ok ill try that link
Dodgy problems... namely WLOD
Sorry to hijack I have a pretty similar problem. I'm running (or rather trying to run) J's CM 7.0 J020 K010 and when I installed it, it looped a couple of times, then booted into the ROM. The only problem is I keep randomly getting WLOD. Its when I open an app: Settings, Phonebook, Messaging, you name it - it happens. It also happens randomly on the home screen. My phone then reboots continuously. It reaches the boot animation, then does WLOD and starts all over again. I have no clue what to do
Phone details are:
Model - X10
Android version - 2.3.3
Baseband version - 2.0.52
Kernel version - 2.6.29.6-b10 [email protected] #1
CPU info - ARMv7 Processor rev 2 (v7l)
Mem info (avail/total) - 145 MB/287 MB
Mod version - CyanogenMod-7.0.3-X10-J020c
Build number - GRI40
I followed 9Lucas5's instructions to the letter (from the link http://forum.xda-developers.com/showthread.php?t=1085642&highlight=CM7) but it seems to not be working so well... Can anyone help?
Related
First of all, I don't want to offend any of our great X10 developers, but after 1 month of testing, I couldn't make out 1 ROM/Kernel combination, that is actually ready for daily use. WLODs over and over, random reboots when the phone is idle, Wifi Problems over and over, slow performance, high temperature. No matter which ROM or kernel I use, on of those problems occur.
So my question ist, did anyone actually manage to install a ROM / Kernel Combination that fits the following list?
- No WLODs / random reboots. Okay 1 or 2 a month are okay, but 2 a day is to much (MIUI 1.7.22 Android 2.3.4 and CM 7.0.3 Android 2.3.3)
- No reboots when actually using the phone (MIUI 1.7.22 Android 2.3.4 Reboots when shuffling through all my music)
- 100% working reboots (MIUI often ends up in endless bootloops)
- Perfectly working Wifi (WB-Xperia TW 009 cannot connect to 802.1x Network, MIUI Wifi often can't be activated after standby --> reboot --> bootloop)
- Working GPS: I often use my phone for tracking when I'm mountainbiking. Last time I tried with WB-Xperia, my battery drained so fast it was all gone after 1 hour and the phone ended up in a neverending WLOD-loop.
ATM I'm on WB-Xperia 009, but at work I cannot connect to our WLAN so I have to switch again...
i'm using TW 007 with 2.6.29 zdzihu-mod3.52 [email protected] #1
Thats what my X10 says
Stable as whatever rocks are not so stable as this
Everything works (except the special ones, like Wifi Thether and so on )
Greetings
aus Hamburg
hi there, i have a an hTC HD2 Leo which keeps freezing. previously when it was runing on windows, after the fon has been used for a while, the back becomes hot and the fon restarts and freezes at boot screen, i recently flashed it with an android rom, updated the radio but yet the same thing happens. after the fon has been used for a while it becomes hot then freezes. Anyone with any solution should kindly help me.
thanks.
this is my system info:
Android version
2.2
Baseband version
15.42.50.11U_2.15.50.14
Kernel version
2.6.32.15-g66f6ed7-dirty
[email protected] #2
Build Number
2.29.405.5.CL293415 release-keys
software Number
2.29.405.5
Browser version
Webkit 3.1
Have you tried closing unused (the ones not being used) running apps in the background? Have you also tried clearing caches of applications? A great way to start is by using this: https://market.android.com/details?id=com.netqin.mobileguard&feature=search_result .
i always close all background apps that are running....
Citizengaby said:
i always close all background apps that are running....
Click to expand...
Click to collapse
How about clearing the caches?
got stucked with hacking
Hi all,
I can't post on development, just wanted to thanks slide for Gintonic 2.1 & new kernel performance is up, yet i still experience random reboots on my X10 mini pro.
what I did: SEupdate, format SDcard, then root & xrecovery, then reset/wipe and install rom & kernel, so I'm sure it's clean install.
But I'm still experiencing reboots ...
Regards,
Benoit
benoitm974 said:
Hi all,
I can't post on development, just wanted to thanks slide for Gintonic 2.1 & new kernel performance is up, yet i still experience random reboots on my X10 mini pro.
what I did: SEupdate, format SDcard, then root & xrecovery, then reset/wipe and install rom & kernel, so I'm sure it's clean install.
But I'm still experiencing reboots ...
Regards,
Benoit
Click to expand...
Click to collapse
I have same problem in zombie panic kernel v 1.59 and v 1.61.
after i update to v 1.62, i don't had problem reboots. and everything it's ok.
Problem occurs usually when:
I use the phone for 10/15 minutes, that is running music or radio, or using the phone, like surfing and installing app from market.
I'll try the new 1.63 ...
Benoit
Sent from my U20i using xda premium
Hi, No reboots for me 4 days into 1.63+2.1, I did similar process only difference is I use clockworkmod, someone else will have to confirm but I remember a while back all the roms where coming out with "no longer supporting xrecovery". As said dont know might be nothing but everyone seems to use clockworkmod now for flashing.
Sorry assuming you used xrecovery to flash rom since you mention installing it.
Well strangely, the update to 1.63 did it, no more reboot and I can even OC the phone ! It works great no reboot, even with wavy usage of GPS navigation with CoPilot live over the week end ! this is perfect !
I only have an issue with the radio FM app which is buggy : sound start on the hp instead of head phone, favorite station are not kept, frequencies are written in green on black which is not visible and RDS name is overlapping frequencies ...
Another issue, I'm still not able to fine tune auto brightness to have good reactivity when phone get out of standb by on shiny day it take 1/ 1.5 second for the screen to detect it need to boost lightness ... Same when I'm in a call and I want to use the keyboard to dial, it takes 1/1.5 second for the phone to adjust brightness... I've tried several tutorial from forum but it still have this small lag in brightness reactivity.
Other the phone is now perfect to me in 2.3.5 ! Thanks very much slade87 ! One note I don't like the boot animation some less shiny would have been welcome ...
Cool you got it all working, yes there where instabilities with cross ROM/kernels.
I like the new bootanimation but you can allways change it out if you dont..
(update 7/7/11)[Boot Animation]more bootanim
Bootanimation Installer v3.3
Hi XDA-developers,
It seems to be an old problem, but it's quite annoying... I was hoping that the new released ICS 4.0.4 could fix this bug, but unfortunately, no.
My phone:
Android 4.0.4
Baseband: I9100XXLQ5
Kernel: 3.0.15-i9100xxlq5-cl753921
Build number: IMM76.XXLQ5
I was using 4.0.3. When I wake up my phone from screen lock, and then immediately turn on wifi, networks can be found and shown, there is a sign with a grey "?" saying that wifi networks are available, but wifi will not be connected immediately. Instead, it will freeze for a little while. Then it will do auto-scanning the networks 1 ~ 2 times, and connect wifi ~30 seconds to 1 min after.
I have tried pretty much every method that has been recommended: Wifi Fixer, Wifix Manager, change to static IP, change frequency to 2.4Hz, etc. However, I have to say no method worked.. Then I tried to update it to 4.0.4, expecting that the new version has fixed this bug. UNFORTUNATELY, it is not solved. The only problem is that it takes about 1 minute to get connected.
There is an issue which discussed this problem (not exactly the same, but similar, they suffered from totally frozen and re-booting).
Issue 28036 Android
Does anyone know how to solve this issue? I'm not sure if it is samsung's problem, or the ICS ' s problem .. Why did they "ignore" us???
T.T
Solved When Re-flashed my kernel using CWM from Phone
iambigman said:
Hi XDA-developers,
It seems to be an old problem, but it's quite annoying... I was hoping that the new released ICS 4.0.4 could fix this bug, but unfortunately, no.
My phone:
Android 4.0.4
Baseband: I9100XXLQ5
Kernel: 3.0.15-i9100xxlq5-cl753921
Build number: IMM76.XXLQ5
I was using 4.0.3. When I wake up my phone from screen lock, and then immediately turn on wifi, networks can be found and shown, there is a sign with a grey "?" saying that wifi networks are available, but wifi will not be connected immediately. Instead, it will freeze for a little while. Then it will do auto-scanning the networks 1 ~ 2 times, and connect wifi ~30 seconds to 1 min after.
I have tried pretty much every method that has been recommended: Wifi Fixer, Wifix Manager, change to static IP, change frequency to 2.4Hz, etc. However, I have to say no method worked.. Then I tried to update it to 4.0.4, expecting that the new version has fixed this bug. UNFORTUNATELY, it is not solved. The only problem is that it takes about 1 minute to get connected.
There is an issue which discussed this problem (not exactly the same, but similar, they suffered from totally frozen and re-booting).
Issue 28036 Android
Does anyone know how to solve this issue? I'm not sure if it is samsung's problem, or the ICS ' s problem .. Why did they "ignore" us???
T.T
Click to expand...
Click to collapse
Hi, I am using ICS 4.0.3 with XXLPQ Kernel. I have faced some serious WIFI turning on Problems for about 2 months, not paying much attention, however I am now frustrated with this time waiting process and restarting my phone when it shows blank face to me.
I have gone through all the forums and said, 2.4ghz enabling, proc-ing the mem bytes size for memory increment and other said restart tools. I have now tried my very own method that blinked in my head, I thought just why not reflash with the same kernel from my Phone using CWM manager. Clockworkmod Manager and then targeted the same old Kernel File to flash my kernel. Now it's working fully functional.
So I recommend, Give it a try, reflashing your kernel with CWM from your phone. If more details are needed, please message me, I will post the needed steps to do so.
the kernel controls your wifi, so try another kernel like the guy above me said
hello people, i am having problems with my galaxy player 5.0 freezing up
i am using the cm 9 rom found here: http://forum.xda-developers.com/showthread.php?t=1679957
heres my problem first off my cpu it is overclocking on its own and i dont want it to since it harms my device's life span i can set it to the stock setting (1000 ghz) but when i go in after a while it will show up at 1200 cpu so id like to know what is up with that?
know to problem im having some of my apps will not boot up it will start to go in but it will not load into it it will freeze and after a bit it will come up " not responding do you want to close the program" it is really bugging me i ca nstill go back to my home but it takes a while and a few trys before going into the game
could this be an unsuccesful overclocking
by the way i have the us version with this kernel http://forum.xda-developers.com/showthread.php?t=1445840 and this file (DD_01142012.tar)
it also freezes in the middle of one of my game (dream heights) is it the app or my device
some answers would really be appreciated
i will thank the people who respond with helpful replies:good:
You are not actually running entropy's kernel. cm9 comes with a kernel that is flashed along with the rom.
your overclock settings will not stay unless you tick the set on boot option.
you may want to do a full wipe/ reflash rom, or try cm10