Related
Hello Guys,
i have a problem, i had already replaced the LCD-Screen because the old was broken.
But now i got a new problem... if i place the new screen on the digitalizer i got a glimer on the display. I don't now why. But i already discoverd that this effect only appearce if the LCD-Screen is on the digitalizer..
So what is the exactly reason and how can i fix this problem? Is the digitalizer cracked?
Here are 3 Pictures, one is without the digitalizer.
Thank You,
PS: Sorry for my bad english
did you try to fit digitizer in or just holding it upon the lcd?
what would happen if you rotate it 90degs?
are you sure there is no protection foil still on the lcd???
-
behind and on the lcd, there are reflection foils, bluring, light redirecting, polarizating. maybe 6 of them together. some are glued on screen, some are just below it. obviously there is something in digitizer as well, and those in your replaced lcd are not compatible with digitizer.
can you ask for return of the lcd and get another one?
the other option would be getting replacement of digitizer from the same shop.
or third, this effect doesn't look like it's from polarizator. polarizator is glued but those others are not. if it will not change if you rotate it, like with polarizator effect, means it's not polarizator and you can replace those other foils from below lcd. putting ones from your broken screen to the new one. It's quite difficult, but could be done.
okay.. if i rotate the digitalizer the effect changes..
in nearly 90 degree the effect is better than normal.. but not really good..
so is there a magnetism issue??
or whats the reason for this effect?..
could the digitalizer broken? but it's still working..
the display brokes because of violence..
could the digitalizer although broken??
no the digitizer is fine.
the replacement you get was not oem. means was not from the same factory.
someone working in there made some pictures or paintings of the lcd and showed it to his friend who owns a similar factory. He then made this lcd and sold it to you. As he didn't know what sort of, let's call them optic foils, have been used in the original he just put the ones he new were working fine with another mobile. But he didn't expect, as i am surprised too, that the digitizer have an optic foil inside as well. But before realizing, I suppose they already gave bonus to all those little workers and started overnight secret manufacture.
Before realizing the mistake, they already produced a lot of it. To cut the loses, I suppose they created a set of digitizers with a similar practice, which they would sell together with lcd and would be working good.
Now someone, your seller probably thought selling separate lcd would be ok too, so he did. That's why i was suggesting you have right to have an replacement, refund or an new digitizer from him at a fair price.
Of course don't take me too serious on the picture/painting matter, but otherwise I wouldn't be surprised if I came to true quite close
anyway those fake parts are a good quality and in most cases you wouldn't say difference. But shyt happens
as the rotating didn't solve issue completely problem would be those foils below lcd. if your seller would not be cooperative, you've got nothing to loose. open both lcds and change foils over.
Or get a fake digitizer which you would be sure is compatible with that screen.
If not successful, get a combo, lcd + digitizer.
hmm okay..
in the description is written original htc ware..
i had send my seller that problem and now we will see..
thanks a lot for those information..
I would be very interested in knowing how you got the digitizer and screen seperated? Arent they glued and most likely going to break easy?
did you mean the digitalizer and the lcd display or the front screen?
I opened one up once and the LCD appeared to be glued on to the back of the front screen (which I assume is the digitizer?)
ah okay.. eeerm.. i don't know that the lcd was glued on the digitalizer.. because my display has broken and the liquid was out of the display.. so the LCD was easy to take off..
But I've read some guys has warmed it firstly with a hair dryer and then they could take the display off..
hx4700 Killer said:
I opened one up once and the LCD appeared to be glued on to the back of the front screen (which I assume is the digitizer?)
Click to expand...
Click to collapse
you make me want to open ma rhodium.
if it's glued use a razor, or heat gun & blade like on apples.
then clean it and put new tape.
fake3 said:
ah okay.. eeerm.. i don't know that the lcd was glued on the digitalizer.. because my display has broken and the liquid was out of the display.. so the LCD was easy to take off..
But I've read some guys has warmed it firstly with a hair dryer and then they could take the display off..
Click to expand...
Click to collapse
yeah dryer is maybe more safe just keep it below 100 cels. but it's not so vulnerable on bending too.
fake3: you sure you don't have protector foil on that lcd you bought?
i been playing around and get similar efect with a protection foil below polaroid.
there was still one protection foil on the front of the lcd.. but i already removed this foil..
but can you make a picture where the foil the polaroid is??
fake3 said:
there was still one protection foil on the front of the lcd.. but i already removed this foil..
but can you make a picture where the foil the polaroid is??
Click to expand...
Click to collapse
I was playing with just a generic foils. not rhodium.
They can put filters inside plastic nowadays. and mix even more of them and it's all still tiny.
If there is one in digitizer, it would cut sun reflections of lcd and would make good sense.
Glass could be tented, too. digitizer is usually one glass and one foil.
even if you would find something glued on lcd or digitizer, it's not possible to take it of without damage. I talked to people producing foils and applying them they can't take that off too.
There have you be one polarizer glued on front of lcd, otherwise you would see nothing. And they usually gluing one on back. That make the light more efficient. redirect light in useful directions, but is not necessary, that is another possible difference in your case. And probable, because it spares $ and space. But it's glued - no help there if that's the case.
but then there are all those which are dispersing light evenly, those you can try to change. They all have to be used in a set working together they create
something called Brewster condition, if that's not met, you see something like you see on your screen. every active foil is a part of it, and obviously there is something in your digitizer.
Just had another though, there is a small chance that htc decided to change factory or producing process themselves. and both are original. But I wouldn't say that's very probable.
So guys,
i solved the problem..
I bought an new Digitalizer from the same seller and now it works fine..
Thanks a lot for the hint with the different manufractures..
Greetz
happy to hear that
no worries
guys.. i wan to ask something..
my LCD is glued to my digitizer. since both of it is broken.. i juz throw the whole part away.
but then, i diden really glue my new / replacement LCD to my digitizer.
so i assume they did have some space in between.
although my rhodium works well now, but my digitizer only able to sense fingernail o stylus only. anything a tad bigger than fingernail, it wont pick up. neither my thumb nor my finger.
is this possible due to the space in between the screen made it so? or my digitizer was some lousy quality stuff?
devalian said:
guys.. i wan to ask something..
my LCD is glued to my digitizer. since both of it is broken.. i juz throw the whole part away.
but then, i diden really glue my new / replacement LCD to my digitizer.
so i assume they did have some space in between.
although my rhodium works well now, but my digitizer only able to sense fingernail o stylus only. anything a tad bigger than fingernail, it wont pick up. neither my thumb nor my finger.
is this possible due to the space in between the screen made it so? or my digitizer was some lousy quality stuff?
Click to expand...
Click to collapse
The digitizer is a seperate part from the screen. It sends X - Y coords to the device letting it know where you pressed and the device coorelates that to what was on the screen where you pressed.
What I am saying is that you could have the two pieces seperated the screen in one place on the digitizer in another and you should still be able to press on the digitizer and have the device react appropriately.
The digitizer works independantly from the screen.
haha.. so in short.. it means by digitizer is lousy rite?
I Have de same problem, I need a new lcd screen but i dont know where buy
please help me
and i need the service manual
Thks
A few weeks ago, whilst changing a flat tire, I broke the LCD screen of my beloved X10 Mini Pro. After no useful response from SE, i decided to do the repairs myself. It turned out quite easy to do. For those that might need a hand in replacing the Front cover digitizer and/or the LCD screen, I put up some pictures of the procedure on my Picasa account:http://picasaweb.google.com/116771174771089812262/X10MiniProScreenRepair?feat=directlink.
The Digitizer and LCD screen is available on Ebay by many different vendors.
All in all for about $50 dollars a replacement LCD screen. If u have a broken screen u might consider doing it yourself, as it was very easy and took about 30 minutes.
Thank you!
I plan to do this someday, of all my phones the X10's plastic gets scratched the easiest!
I always keep the phone in my pocket by itself, and somehow all the edges of the front screen have micro scratches on all sides.
Hi
i would like to ask you about the quality of the new digitizer is it the same as the original or not as responsive.?
thanks
I replaced the LCD screen only, not the digitizer, so I can't answer your question.
However I think if u replaced it with another it would be as good as any other new one? The screen I replaced was as good in any case...
Sent from my U20i using XDA App
Thanks a lot. For 50 $ i bought lcd screen AND digitizer on ebay. Good quality. And it took me 20 minutes with your help.
Can u tell me how to change the rear speaker
I can't find any info on this, but it looks like it could be tricky to replace. I cracked my glass by dropping it onto stone, still works OK. You can pick up digitisers pretty cheap on ebay (£20 UK) but does anyone know how to replace? I read that they can be glued to the LCD?
Thanks
Google for the fixit website, if someone has done it there will be a tutorial, or you could follow the guide on here to upgrade your sd card....only because you have to take the phone fully apart. You need to check if the lcd is glued or like the iphone 4 resin. If they are a sealed unit you'd be better off getting the lcd/digitizer combo on ebay. trying to separate an lcd from the digitizer is asking for trouble imho.
I have ordered a digitiser, really hope the digitiser is not glued to the LCD, there is a big price difference. I'll let you know how I get on.
I bought a Mozart with wrecked digitizer and also want to repair it. The digitizer is on its way, so in a week i could tell you how difficult or maybe easy it is.
If you are faster, please post your experience.
I found this thread on xda.cn, and it seems that the lcd isnt glued on the digitizer, so lets hope so
hxxp://xxx.xda.cn/newshow.php?snid=2167
EDIT: sorry cantpost links, so must change the x's to t's and w's
I have got my digitiser now, looks brand new. Just need to find the time to replace, might upgrade the SD card at the same time.
Done
I did this with Andy's guide to help: http://lifeinthefastlaneok.wordpres...-7-mozart-sd-card-memory-upgrade/#comment-225
I used this guide to replace my digitiser (the glass) which I smashed. The good news is that the digitiser is not stuck to the LCD at all. I just bought a grade A digitiser off ebay for £20 which was pretty much perfect - glass was perfect with a couple of small marks on the back case, but basically like new.
There were a couple of differences to this guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
I now have a phone as good as new, I didn't replace the SD at the same time but probably will do at some point when I can stand loosing all my data.
Found time today to replace the digitizer. I also used Andy's videos for instruction. And it's really not that hard. Pretty easy for someones first mobile phone repair.
Well done, I would add for anyone else needing to do this, be very careful not to touch the inside of the digitiser or the LCD when you have it apart! Also have a glasses cloth handy for removing any dust particles just before you put it back together.
I do have one strange thing however - before I had intermittent issues where I could not slide the screen up when locked for 10 seconds or so. No I have a slightly different issue when unlocking - it doesn't always let me press on the right hand 3 numbers on the PIN screen! So it seems the unlocking issue some people have is due to a hardware issue. My digitiser was second hand so I might ask for a replacement, but I can change my pin so that it is not an issue.
My Mozart touch-screen hardly works at all plus my wife's Mozart has a cracked digitizer glass (still working fine).
So silly me I took the plunge and ordered three cheap replacement digitizers via eBay (from Hong Hong). They arrived today and all are s**t useless.
When I opened the box I smelt the rat when I spied the HTC logo on each was blanked out on the outside of the plastic zip-lock bags (with what looked like black felt pen), plus each glass has minor blemishes/scratches. Comparing each with the digitizers I removed from my and my wife's phones, they have a different design of ribbon cable conductor layout plus there are indications the plastic moulding isn't as well finished in a couple of places. Either these are factory rejects or knock-off copies. Lesson learnt :-(
Anyway, I now need to buy genuine HTC parts.
Any pointers toward reliable sources appreciated, thanks.
KJ
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Can someone who as changed a screen on this phone using Andys guide, please tell me how easy or hard it was, and how long does it take??
And would be grateful if someone could give me a link to the correct digitizer for this phone....
I am in the UK and have been qouted 50 pounds at a phone shop for the to supply and fit screen...
Did you see my post?
There were a couple of differences to this (Andy's) guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
The most tricky thing for me was getting all the dust off the LCD and the digitsier, as soon as you get it apart things start sticking to it like crazy. Have a clean glasses cloth around.
It takes about an hour on your first go. The main thing is to get the orange ribbon cablle in fully, it can be tricky - you need to get a good grip on it (fold it a little) and push it home quite hard, otherwise you get it all back together and find it doesn't work.
I have had 2 dodgy screens off ebay, £50 sounds OK if it is a brand new original HTC screen.
Or just search for 'htc mozart digitiser' on ebayt there are loads.
hsclater said:
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Click to expand...
Click to collapse
Thank you for that. A close look at the ones I bought from china I'm sure now are removed from phones with faulty digitizers, then repackaged as new. One of the three had significant dust and dirt on the inside of the digitiser screen. I've requested a refund via PalPal disputes.
I've ordered some digitizers from ecell in the UK. I'm led to believe by them that these are genuine HTC factory supplied spares.
KJ
I just replaced my 4th screen (1 broke, 2 dodgy).
This one is perfect - as new condition and works perfectly, my last one was not responsive in some situations e.g. lock screen.
This is the one I got (UK)
http://www.ebay.co.uk/itm/130498971267?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Of course, your mileage may vary - some are probably good, some not. Replace it, if it doesn't work ask for another, etc.
My new digitizers arrived today from the uk. Horray they are genuine HTC spare parts properly packaged. The downside is they don't include the frame the glass sit in and is adhered to.
So I watched the official HTC Mozart disassembly video on youtube to see how to remove the existing digitizer glass from the frame - got it apart ok after heating the unit to soften the adhesives but it didn't come away entirely cleanly i.e some of the adhesive foam broke away and was left on the underside of the glass.
So... check on eBay and found sellers selling refurbished screen frames ready for a new glass to be attached.
Will update on progress once they arrive.
KJ
just ordered my digitiser today... wish me luck...lol
poolielad said:
just ordered my digitiser today... wish me luck...lol
Click to expand...
Click to collapse
Well I am now buzzing... have just changed my screen at it works perfect.....
£50 they wanted at the shop...it cost me £13....
Just to let you know how easy this is to do........If I can do it, anyone can..
Did anyone find a reliable supply in the end? I just cracked my digitiser so looking to replace it...
--edit--
Also, how much have others paid? Don't want to be ripped off for some sub-standard part.
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
fx.lagwagon said:
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
Click to expand...
Click to collapse
Mate, I had the same problem. However it seems no one was able to help me either.
I also purchased a digitizer from Ebay for my Mozart - the exact same inverted issue occurred with me. I wasn't able to find a solution.
I'm in Australia with a T8697 model. The digitizer I received from Ebay had a circle around the windows button at the bottom - This was not on my original screen.
In the end, I purchased a digitizer from an Australian business. Cost double the Ebay digitizer did, so I hope it works... Haven't received it yet, but I'll let you know when I put it in.
What model Mozart do you own?
So it happened - my neoV fell on the ground. The screen smashed totally, however
the picture still seems to be clear behind broken glass, no bleeding or discoloration.
It's still responsive to gestures, however there is danger of cutting myself while touching the surface.
Now I need to know what needs replacing. Is it only the touchscreen - I've found some on ebay:
http://www.ebay.co.uk/itm/SONY-ERIC...arts_Tools&hash=item4604353c33#ht_2532wt_1165
however I'm not sure if this is only a thin foil that goes over the glass or this is the whole glass that I need to replace with.
The cover is slighty scratched at one corner, this is not of such importance to me, I just need a working screen.
if screen is entirely responsive, then touchscreen/digitizer is ok, no need to replace it.
you might be just lucky and end up with ONLY broken front mask.
Digitizer is behind the glass? I thought this is a one-piece component. How is this mask called?
EDIT: you were probably referring to front cover? I found those also on ebay. I'm not sure how NEO V screen is held together - digitizer can be separated from front case?
Front cover, front mask, front housing..different names, but yes we think on same.
Digitizer shoud be stuck with screen and front case can be removed without separating from digitizer or screen.
Google up for disassembly videos tutorials or pdf guides, you can even find it in accessories section.
Repair
It's danger for screen sensor if you direct touch,,,
suggest go to Sony center nearly
sorry my bad english
It's the digitizer. It's composed from glass + sensors and this part as whole can be detached from front case.
But I need a new front case too, I found one of the side panels to have broken support latches around screws. It's time to get a red one
Does anyone know if MT15i Mt15a parts are compatible with MT11i Mt11a?
Xpeia neo v front screen glass cracked
Hey buddy,
I have broken the screen glass of my xperia neo v and fortunately it is working fine still.........
All the gestures are working perfectly and there are no changes in color...........just like u've mentioned.........
Just wanted to know if you've got your screen replaced, if yes from where? how much did it cost you?
Could you please give me some tips for the same.
Thanks & Regards.
I did
You need a new digitizer and case if some important parts of it are broken. Mounting the digitizer is a bit difficult, since it's hard to close it without trapping dust between it and LCD. Look into the technical manual
Check eBay for prices.
Sent from my MT11i using xda app-developers app
Hi
Is there any way to retrieve my contacts as the phone screen is totally not working
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
GrandMasterPlank said:
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
Click to expand...
Click to collapse
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
honorable said:
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
Click to expand...
Click to collapse
Thanks dude, much appreciated. I was into it until you started mentioning removing parts by heating them up then thought I'll leave it to the experts. :laugh: Honor UK have quoted me £80 as it's a pretty clean break so I'm going to give them a go and see what they say. If they do the same as they did for you, which they said they wouldn't!, then I'll go with that. Will let you know.
I'm surprised their aren't more threads on hear about replacing screens because this phone does feel fragile despite being reasonably weighty so I'd have thought there'd be loads of cracked screens out there. I dropped my old S5 a couple of times from higher up and the screen survived both times. Am now thinking a tempered glass protector might be in order for the 7 :fingers-crossed:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
honorable said:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
Click to expand...
Click to collapse
After reading reviews of the official Honor repair company, SBE Limited, and how they appear to be happy to scam people I thought I'd have a go myself. So I bought a replacement front glass and thought I'd give it a go.
Dissembling the phone is really easy, once you've got the hang of the clips holding the back on, and taking it all apart was easy. What wasn't so easy (read nigh-on impossible) is separating the front glass from the digitiser. I tried and tried and in the end the touch screen just split into a number of layers so I'll need to order the complete screen assembly. My concern is you mentioned you bought one off ebay and it wasn't as bright as the original. From this I'm guessing it wasn't an original screen? I'd like to get an original if I can. Do you have a link to the one you bought? How long did it take coming from China?
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
boroleigh said:
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
Click to expand...
Click to collapse
Thanks for the nod. Tried it but no joy. For some reason they don't support the Honor 7. Very Huawei tbh, they're left hand doesn't know what the right is doing. A bit all over the place.
honorable said:
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
Click to expand...
Click to collapse
Great stuff, have just ordered the last one they had in stock in they're in France also, so should be quicker than coming from Hong Kong. Funny thing is I hadn't seen their add before, it hadn't come up with my ebay search for 'Honor 7 replacement screen'. Without having the name I'd not have found it and paid more so thanks again! :good:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
Click to expand...
Click to collapse
Great tips, thanks again. I'll be sorting it as soon as it arrives. Will report on how I get on.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.......
Click to expand...
Click to collapse
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
GrandMasterPlank said:
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
Click to expand...
Click to collapse
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
honorable said:
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
Click to expand...
Click to collapse
The screen and housing isn't original Huawei, it's a pattern unit but tbh it looks totally identical in use, no less dim than the original screen. There's also no bleed at all. There weren't any hollows and slots to fill with card under the battery. The only hollow was at the base of the battery as it sat slightly higher up (towards the top of the phone when laid flat) in the casing so I filled that with folded card.
The only slight issue is that the screen shape (rounded corners of the glass) when looking at the phone from the front doesn't fit into the corners of the casing absolutely perfectly. Tbh only a phone nut would notice it, wouldn't be an issue to anyone else.