Related
after flash to the newest firmware which is .435 , i have no signal at all, then i tried the 2.2, then 2.3, still no signal service, then i go to JIT, and format the system which i thought it going to be back to the original again, after that, i reboot, the only thing i see is the logo "sony erricson" and it keep stay there............
did i brick my phone?
how am i going to solve this?
please help!
Wrong forum. Fix it thru Seus
goku16 said:
after flash to the newest firmware which is .435 , i have no signal at all, then i tried the 2.2, then 2.3, still no signal service, then i go to JIT, and format the system which i thought it going to be back to the original again, after that, i reboot, the only thing i see is the logo "sony erricson" and it keep stay there............
did i brick my phone?
how am i going to solve this?
please help!
Click to expand...
Click to collapse
Sent from my ARCified X10 with CM7 RC1 2.3.3 Gingerbread
download original 2.1 from xda and try flashing it using flashtool which you can find in this forum. or connect your phone to your pc or mac and try repairing it through SEUS.
SEUS, is only updating the phone which it always said i already have the latest sofwarre (((((
goku16 said:
SEUS, is only updating the phone which it always said i already have the latest sofwarre (((((
Click to expand...
Click to collapse
Yes but install anyway.
Sent from my ARCified X10 with CM7 RC1 2.3.3 Gingerbread
Make sure u flash the firmare for x10a or x10i, whichever phone u have. Download the correct firmware and use bin4ry's tool to flash. I hope this helps
Sent from my X10 using XDA App
there's no other option, it just say already have the lastest, the the button exit-.-
btw, i just tried to flash using flashtool 0.2.6 and there a triangle error above the phone?
please help!
MNA1 said:
Make sure u flash the firmare for x10a or x10i, whichever phone u have. Download the correct firmware and use bin4ry's tool to flash. I hope this helps
Sent from my X10 using XDA App
Click to expand...
Click to collapse
originally, it's x10a.. i chose the latest one which is 435, now i ll try the 504, hope this works
you can download the original firmware from this link
http://forum.xda-developers.com/showthread.php?t=683793
flash it with flash tool
enjoy..........
The reason you didn't had network signal may be that not all roms work with all basebands, so it could have been rom related. Have you also waited till the rom rebooted a few times?
hello everyone
i have xperia x10i and i want to install 2.3 gingerbread on my phone
what i have tried is
put the Release Candidate Cyanogen CM7.0 RC4 v014 stock
!release_CM7RC4_014_alpha
!release_CM7RC4_013
i have tried this by puttting the update.zip on root of my mobile then on xrecovery i have done install update.zip
rebooted
but my mobile is stuck on reboot loop and i have no luck in successfully doing that i have tried 3 roms but none them are working
please help anyone please
Have you tried putting the zip-file in a different folder, e.g. "zip-files", and then move to that folder using the "install custom-zip"-possibility, and then install the ROM?
And do you follow the instructions, like wiping the caches etc.?
Lots of success,
kwarkje
no i have not done this and i have done full wipe
wipe dalvik cache before updating nothings working
kwarkje said:
Have you tried putting the zip-file in a different folder, e.g. "zip-files", and then move to that folder using the "install custom-zip"-possibility, and then install the ROM?
And do you follow the instructions, like wiping the caches etc.?
Lots of success,
kwarkje
Click to expand...
Click to collapse
tried the making seperate folder not working
Make sure u have the correct baseband. That could b why u have the bootloop
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
The correct baseband or at least the one it was built on was .52 but i installed all correctly and had nothing but errors and random reboots
Good luck
sometime it might take long time for the phone to reboot... wait & be patient..
i have baseband .58 and my xperia is on 2.1 update 1
please can someone tell me what exactly i can do to get 2.3.3 ginherbread on my xperia coz i m a total n00b
U need baseband 52. Have u used flashtool before? I will post a few links to help u wen i get to a computer
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
i know a little of flash tool
so i need to flash .52 bb
please tell me i m waiting for reply
flashed 52 bb instaled 2.3.3 cyanogen mod 7 rc 14 but camra not working and most important thing is my memory card showing not inserted showing
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Read that thread for that info. I have never used that rom before. So i dont know. U know that ROM isnt ready for everyday use right?
Sorry for the double post
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Same problem....
But v013 is working on me but no wifi.
And v014 reboots many time...xD
Just w8 for fixing...=DD
Dear Dev,
I do have android 2.1 update1 baseband version 2.1.54, would like to upgrade to gingerbeard. I already rooted my mobile and installed xrecovery,busybox, rom manager. would request you to let me know the procedure to update to gingerbeard
er.sivanantham said:
Dear Dev,
I do have android 2.1 update1 baseband version 2.1.54, would like to upgrade to gingerbeard. I already rooted my mobile and installed xrecovery,busybox, rom manager. would request you to let me know the procedure to update to gingerbeard
Click to expand...
Click to collapse
If you want GB from J.. flash baseband .52 and install ROM via xRecovery.
http://forum.xda-developers.com/showthread.php?t=911364
guys i dont know what to do now it's 5:30 here now. i flash baseband 67 on my stock rom 2.1 but the result is unknown baseband i did out the sd card the factory reset but didnt work to me. when i try to repair using pc companion its's said theres no software upvailable please help what i need to do first? can i flash other firmware Generic version 2.1update1 build 2.0.2.A.0.24? my device before is SO-10B ntt docomo it came from japan. should i flash into SO-10B? i really need help!
EDIT: its ok now i flash 2.1_2.0.2.A.0.24 with DualTouch already.. but i have 1 question if need to flash to baseband 67 i need to custom rom? like cm6 with x10i firmware then flash baseband 67? or i can directly flash in stockrom 2.1 with x10i firwmware?
Just flash the older baseband back, the one which you were on.
P.S: Post should've been in the Q&A section
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
kozxmartt said:
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
Click to expand...
Click to collapse
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance. can i flashbaseband even im in cm6? without flashing firmware stock?
gAracUh said:
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance.
Click to expand...
Click to collapse
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
kozxmartt said:
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
Click to expand...
Click to collapse
oh thank you again! but i can flash custom rom in xrecovery right? last question
Are we talking about a stock rom?
In any case just go back to your previous BB (the one that is supposed to work with your stock rom).
gAracUh said:
oh thank you again! but i can flash custom rom in xrecovery right? last question
Click to expand...
Click to collapse
Yes, you have to flash custom ROMs in xrecovery.
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
agentJBM said:
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
Click to expand...
Click to collapse
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
gAracUh said:
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
Click to expand...
Click to collapse
1.Flash Stock
2.Flash Baseband
3.Flash Rom
gAracUh said:
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
Click to expand...
Click to collapse
If you know that, why are you trying to use a incompatible baseband with his ROM?
I find it ironic that people are using that same line over and over suddenly.
They come and ask for help then act like they know what the problem is.
Seriously i am weird ed out.
3 words i am starting to hate "Help, Please, Bootloop"
What version if Trips IRIS do you want to flash.
1.5.0 works well on baseband 67
There are a couple of files you need to patch afterwards or you may get keyboard and/or wifi issues - they are the network library and keyboard layout files. This patch was put up by cobrato but the links to them were in a thread that got deleted.
If you can't find them pm me - I should have them lying around somewhere.
Sent from my X10 TripNMiUI-IRIS using XDA App
Hi, i have Wolf´s rom (2.2.1) with 54er baseband. i want to update... but ive flashed the baseband update (71) first... no i cant go in the recovery to flash anything.... what can i do plz help!!
Flash the old kernel back, see if it is working.
wont work.. tried... it boots up but now i have no wlan and cant write and recive sms... :-( cant flash original sony software... it says that the server are overloaded...
Forgot to remind you about the baseband too.
Connect to SEUS or PCCompanion and update.
Then root and install custom kernel of your choice
This is in the wrong section.
Now you have the correct advice you should not reply in this thread.
PM me if you have any problems or re open this thread in the Q&A section.
I will not reply in this thread
now i have:
2.2.1 andoid
2.1.54 baseband
2.6.29 [email protected]#1 baseband
and the wolf xperia TW009 rom...
but i cant go to recovery
@OP, unfortunately, there is no solution for your problem. You will have to start fresh. Flash your phone with the latest 2.3.3 GB FW pre-rooted by DooMLorD, and enjoy.
and how?!?!!? pc compangin says that the sony ericsson server are overloaded...
Using flashtool, flash this:
http://www.multiupload.com/JEXUAHAZTL
Thread moved to Q&A. Thanks for reporting and be good to each other
how to flash a .zip with flashtool? *smile*
body85 said:
how to flash a .zip with flashtool? *smile*
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928343
body85 said:
how to flash a .zip with flashtool? *smile*
Click to expand...
Click to collapse
Sorry for late reply(my phone is out of battery), but anyway, unzip the the .ZIP file first and put it in the "firmware" folder(if I'm not mistaken) in the flashtool folder.
Hi Guys,
I've been flashing a custom rom (GB) for test purpose, and after a flash my phone got hanging during boot at sony ericsson.
I then tried to flash stock .42 ftf, no luck, then stock .62 ftf, same, afterwards update with sony update service to latest fw, without any luck.
then tried once to update it with pc companion, but still hanging at sony logo.
Any ideas how could I recover my phone?
Thank you!
sorry, I've just realized I should have been posting this thread in the Q&A section, I was in hurry ....
would a moderator move it to the right section?
thanks!
u have a locked bootloader????
Yes, I do!
i think the only way is now to try a custom rom! u have tried so many things! jyst give it a try!
:good:
all i need is a thanks! plz press
if you'd read my first post you'd have seen that I started with flashing custom rom.
unfortunately I don't have what to thank for !
would a moderator please delete this topic, I found an older one discussing the same, so this one is useless.
sorry!