I attempted to root my device and then upgrade to Froyo a few months ago. When I turn it on now it says baseband unknown in the settings. If I do a factory reset its does not fix the baseband. I am also unable to make phone calls. When I download the Froyo update from the dell website using wifi it hangs during the install and gets stuck on the dell logo.
Is there a way to update the baseband? I am newbie so if there is a step by step guide to this process it would be amazing.
Related
Hey Guys,
Just got a AT&T Dell Streak from Dell and right away started installing 2.2 via QDL tool, worked fine. Then installed the 2.2 official update. Now I have no sound from the ear piece at all. Calls will come thru the speaker phone but not ear peice. I have factory reset and reboot, but no dice. Any suggestions from anyone? I am about to send back to Dell, but want to check with the experts first.
baseband gausb1a131800-us
kernel version 2.6.32.9-perf
build 12821
Thanks
Garrett
Hi all, I'm currently running Baseband .46 and due to the cable port on the phone itself i am unable to update via pc, so im stuck without dual touch and all that jazz
I was thinking about trying OTA update, so I went to the only stock-ish type rom I have which is i think '2.1-rooted-zdz' which finds an 8.64mb update, it goes through all the normal download progress bar, cuts off the screen, and boots into the box with the 4 dots underneath with a progress bar after that is done phones boots up and the following appears 'Could not update software'
i was wondering if this is because of something specific? Or has anyone got .46 shipped rom which can be flashed via xrecovery for me to try?
Thank you all for your time
*Edit*
I am on Orange-UK
Firmware Version 2.1-rooted-zdz
Baseband version 2.0.46
Kernel version 2.6.29
[email protected] #1
Build number 2.0.2.A.0.24
Here's a bit of back story incase any of you haven't seen my previous thread.
I unlocked the bootloader and installed cyanogen using this Guide. All worked well for a few weeks until my Wifi, Bluetooth and Mobile Hotspot all stopped working. So I created a thread and was told to try putting " Fruitcakes 2.3.5 System and Boot NO Webtop " on and the radio mentioned in this Thread with some success at getting it working for a few hours, but then it went back to what it was before, with activating wifi causing a reboot and bluetooth + mobile hotspot not working at all.
My phone info before I decided to RSD this http://forum.xda-developers.com/showpost.php?p=19657465&postcount=248]Image:
System Info
4.5.133.MB860.ATT.en.US
Android Version
2.3.5
Baseband version
N_01.77.36p
Kernel version
2.6.32.9 [email protected] #2
Build number
4.5.133
The RSD ( v5.4.4 ) showed all progression bars to full, however, when it gets to the " Please Manually power up this phone " stage, my phone is getting past the " Duel Core Technology " boot up screen, then gets to the motorola sign with red going round it and keeps rebooting and doing that. Click on the image below, it'll take you to a video and you'll see what I mean.
Could anyone please help?
Cheers!
SOLVED:
Forgot to factory reset VIA Android Recovery.
Hi,
I bought a new atrix with stocke rom android 2.2.1 , is there any way to have the ota update to 2.3 faster or manualy without rooting the device ?
thnx2u all
Best to just connect to wifi and wait...
Make sure you are connected to wifi. Then go to Settings->About Phone->System Update.
Posted from my rooted Motorola Atrix.
If u r using a unlocked bootloader and not with At&t then u should forget the update coz ull face network issues with the new update especially frequent phone and wifi restarts. It did when I updated and tried to flash back and got soft bricked then I tried factory reset and the phone doesn't reboots but the wifi does every 10 minutes.
Sent from my MB860 using xda premium
First I want to thank all members that have invested precious time and effort to help everyone! You are doing an amazing job!
Second thing I want to say is that I've searched the hell out of the Xperia X10 forum to find solution for my problem. But everything I found and tried was so far unsuccessful. After 1 week of unsuccessful trials, today I decided to join and open this thread as a final effort to seek for answers and a possible solution.
Problem: Every time I open camera application I receive message: "Camera not available"
Tested solutions:
1. I tried SEUS and upgraded to latest firmware: - Phone wont start, gets stuck on camera icon.
2. I tried Sony PC companion, update mode: Same as number 1. Then I tried repair mode: Same as 1.
3. I tried Re-installing a dozen of stock firmwares, 1.6 , 2.1 , 2.3. From branded to Global: - Phone works perfectly, but "Camera not available".
4. I rooted, installed xrecovery, tried several solutions, changed files. no progress.
5. Installed custom rom: Donut HD2.2.6 - Phone works amazingly, but "Camera not available"
Phone info:
Sony Ericsson Xperia X10i
Baseband: 2.1.71
Kernel version: 2.6.29-00054-g5f01537 [email protected] #1
Build number: DonutHD2.2
ETS is ******-8
Currently rooted and installed CWM and Xrecovery.
Cant unlock bootloader since it doesn't recognize certificate
I had a SD card problem before. Solved it by formating sd card with HP disk format software.
I hope someone could help me with this. I don't want to believe that the camera is dead because the phone is in perfect condition. But this would eventually be the final answer.
Thank you!
Have you try this:
http://forum.xda-developers.com/showthread.php?p=12061644
I don't know if that is solution for your problem, but you may try.
Sent from my X10i using xda premium
Dzufa said:
Have you try this:
http://forum.xda-developers.com/showthread.php?p=12061644
I don't know if that is solution for your problem, but you may try.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Unfortunately I'm not able to try and test this solution because I requires a rooted stock android 2.1 (eclair).
My phone doesn't start up on any of the 2.1 stock versions. So far I flashed around 7-8 different 2.1 versions from global to branded etc. but no luck.
Camera with arrow on screen icon appears after which "Sony Ericsson" screen appears and phone gets stuck here and phone temperature rises.
This happens with all 2.1 versions and also when I update with SEUS latest X10 android version.
Only 2.3.3 functions properly on my phone and amazingly battery lasts for 2-3 days even with constant usage of wifi, calls, music and gaming.
But when I tried your suggested solution with the rooted 2.3.3 it gave me some errors in the CMD. Which I tried resolving by running "runme" file as administrator. But another error appears. This is I suppose because of the different android version. The guy says that it works only on a rooted stock 2.1 firmware.
Is there any other way I could test his solution on 2.3.3 rooted stock firmware ?
Thanks again for the reply!
I appreciate it!