Related
This is a new ipad2 imitation, i'm interested but need community support please:
it is on HSN, these are the specs :
Specs
Model #:
i10-h
Operating System:
Google Android 2.2
Processor:
Samsung A8 Cortex 1GHz
Display:
9.7"; 1024 x 768 resolution; 4:3 aspect ratio
Dynamic RAM:
512MB DDR
Memory Storage:
4GB built-in
Memory Expansion:
microSD card slot
Wireless Networking:
802.11b/g/n
Bluetooth 2.1
Ports:
(1) HDMI output
(2) USB 2.0
(1) 3.5mm earphone jack
Battery:
Lithium-ion 6800 mAh
Measurements:
Approx. 9.64"L x 7.55"W x 0.47"H
Weight:
Approx. 0.8 lb.
Listing:
UL
Country of Origin:
China
I can not vouch for other methods but I have rooted this tablet with SuperOneClick ver. 2.1.1. If you leave "Exploit" on "auto" and click "root" you will be pleasantly surprised. Took me two tries, but if you turn on usb debugging in settings and leave the screen timeout on 30min your golden. Happy rooting.... I'm also uploading a google apps zip file. I unzipped it and installed all the files in the corresponding places to get a working Android Market. I used Android Commander to move the files & install apk's. *NOTE* You need to install the apps in the "/sysem/app" folder in this order...
1. GoogleServicesFramework.apk
2. OneTimeInitializer.apk
3. SetupWizard.apk
4. Talk.apk
5. Vending.apk
6. Gmail.apk
7. Maps.apk
After... Restart, Connect to wifi, and launch Market. You will be prompted to sign in to google. Then you will see Market License blah blah blah...
*Use the attached zip not the one at the following link* But use this link as a guide if you need it... http://forum.xda-developers.com/showthread.php?t=827209
Have fun.
*Zip File Link*
http://www.mediafire.com/download/d85zjeb9b43j9do/gapps-hdpi-20100817-Impression_10.zip
****THIS METHOD WORKED FOR MY IMPRESSION 10 MODEL # i10-50, but UNTESTED by me on other models****
***EDIT*** Sorry guys... you were unlucky because I forgot something crucial.... THE DARN ADB DRIVER.... You will need to go into the device manager and right click the "Android" device with exclamation mark & click update driver. Search for the driver and point the installer to this folder should work on 32 & 64 bit if my edits are correct... Tested on 64 bit Windows 7.
DRIVER
http://www.mediafire.com/?lzrwj65da0c5c63
Also when you install those "/system/app" files above use Android Commanders "Installer" and install them one at a time in the order above. AND AFTER YOU RESTART USE LAUNCHER AND NOT SETUP OR YOU CAN'T ACTIVATE YOUR WIFI.
I tried both methods,
SuperOneClick and Gingerbreak both did not work.
The table is running android 2.3.1.
wonkastocks said:
I tried both methods,
SuperOneClick and Gingerbreak both did not work.
The table is running android 2.3.1.
Click to expand...
Click to collapse
Do you have usb debugging turned on, and did you use the latest version of SuperOneClick. For me it stalled when my screen timeout was to short and locked me out of my tablet when the screen cut off. Second time around it looked like it was going to fail, stalled and then prompted me to ok the install of busybox... etc etc. I am also running android 2.3.1 and it worked for me. Just have to keep trying till you get it.
PIC's...
http://img148.imageshack.us/img148/5624/44983779.jpg
http://img225.imageshack.us/img225/3019/68779107.jpg
http://img32.imageshack.us/img32/7827/42856323.jpg
http://img198.imageshack.us/img198/3149/44013908.jpg
Remember i'm running a i10-50, but the pictures speak for themselves. SU, Market...
Fails
I've also tried this on my husband's Impression 10 - same model i10-50. Can you give some details of how you rooted? What programs did you use besides Android Commander and SuperOneClick 2.2.1? Any help would be appreciated.
i just got an impression 10 as well. i10-50 model with android 2.3.1. im interested in more in depth info on rooting it as well. i tried updating firmware from the page it gives from the box. instructions to download the system.img file from the impression site. but i am not sure how long it takes? when i loaded the file on sd card and restarted (power+vol-) one time it stayed on the blue screen with the white status bar for like over a half hour. i thought it froze and restarted. when i tried it another few times the blue screen disapeared and i got a screen full of multi colored lines all down it. when i reseted.you could still faintly see those lines even when its running normaly. its faintly in background and you can see it more on certain pages or folders u open. my first tablet and i wish there was more info on it. any clue what im doing wrong?
dude i do customer suport forthis tablet, as u may know by now............it sux
leader Impression I10-50 firmware update
In order for the firmware update to be completed successfully, u need to first format your sd card via sd card reader or your tablet as follows:
Plug in the tablet via usb to your PC or load your card reader with sd card
Then select and left click whatever removable disk drive your tablet shows up
Select format and make sure the file system is set at FAT32
Select start, your sd card should begin formating.
Once complete, then u follow the 13 steps, but since you have already started step 1-13, just press your -volume and power buttons at the same time (steps 11 and 12 again) and it should update your tab. Be sure to do it twice as far as the volume and power button go so the update completes successfully.
I cannot seem to get this thing to root....tried the above with the external sd unmounted and then removed. Followed the instruction on the gtab post. All I can see is the external sd card. It did install superuser. Without the sd it gets stuck at Step 6.
It took awhile....but switched to EZ File Explorer. And I was able to see the internal sd and copy the files Then was able to install the market! Life is good!
edit: nevermind
StephenMC said:
It took awhile....but switched to EZ File Explorer. And I was able to see the internal sd and copy the files Then was able to install the market! Life is good!
Click to expand...
Click to collapse
Do you know if the root is reversible in case you need to put it back to the factory default? Would installing the image file on the Impression website reset the tablet back to stock firmware?
TC93 said:
Do you know if the root is reversible in case you need to put it back to the factory default? Would installing the image file on the Impression website reset the tablet back to stock firmware?
Click to expand...
Click to collapse
Yes, SuperOneClick has a unroot option as well.
StephenMC said:
Yes, SuperOneClick has a unroot option as well.
Click to expand...
Click to collapse
Thanks for the reply. About that file program you used, the only one I can find with a similar name is "ES File explorer". Is that the one you used?
I can't get it to copy the files over in the system directory, it acts like its write protected and fails the copy. I must be doing something wrong.
Oops yes ES File Explorer...
Need go to settings.... Open menu, choose Settings Check Root explorer and mount file system...
I'll probably just give up on this. This still isn't wanting to write/copy the files. This is the whole reason I returned my Nook Color before because of the hassle it takes to do this.
edit: it copies a few files, but then some files it says it failed.. like the "maps.apk" file.
Had a few apk's not move as well. I think map was one of them. Just followed the install order and did those from the external sd.....all worked out.
StephenMC said:
Had a few apk's not move as well. I think map was one of them. Just followed the install order and did those from the external sd.....all worked out.
Click to expand...
Click to collapse
Thank you for your help. I finally got it working, I spent hours on this.
But I decided to try that original posts recommendation of using the program "Android Commander". I had to search to find it, but its a Windows program that makes it much easier to copy files over to the root directory. (although I had to change a setting it in so that it auto closes the log window after it copies, otherwise you can't close the log window, or do anything else until its closed).
I wasn't able to copy the maps with that either though, it gave the error that there wasn't enough space. But it seems to be working fine now.
Impression i10-50
I bought the i10-50 and actually love the tablet. With google market installed (update firmware first), I have full access to the market and no problems installing apps. The only con about the tab is no gps. To install the market, I only downloaded the google apps file and installed the apks in the correct order and that was it. No need to root. I am truly enjoying this tab now.
I have only had my G-Tablet for about a week and I already ROM it to 2.2 Vegan. This is probably a simple issue and easily fixed. I know Windows very well but the Android OS is totally new to me, sorry.
I have kids and installed a 16GB MicroSD card for movies. I have played with format and such for a few days and finally found that ACC audio at high volume settings and Mpeg4 Video seem to work the best. I use Total Video Converter and it works for everything i have, the G-Tab, Xbox360, my wifes iPhone, and even my Blackberry.
Anyway the issue is when I turn the Tablet off and then back on it keeps re-formating the MicroSD and I can't figure out how to make it stop doing this. I converted 8 movies (7.39Gb) and after the first shutdown of the day it formatted the card.
Congratulations on your new tablet. This issue has to do with the way the gtab indexes media and can be easily fixed by placing a file named ".nomedia" in the root directory of the sdcard.
Also double check which version of Vegan you are running. Vegan Froyo is up to 5.1.1, but has been discontinued. It's now called Mountain Laurel and is hosted on Slatedroid. It requires the 1.2 bootloader. I'm running CalkClem V6 http://forum.xda-developers.com/showthread.php?t=1024120 as a daily driver and it's amazing.
brettdwagner said:
Congratulations on your new tablet. This issue has to do with the way the gtab indexes media and can be easily fixed by placing a file named ".nomedia" in the root directory of the sdcard.
Click to expand...
Click to collapse
Thank you I will give it a shot here in a few minutes. If it works my kids will be most greatful.
brettdwagner said:
Also double check which version of Vegan you are running. Vegan Froyo is up to 5.1.1, but has been discontinued. It's now called Mountain Laurel and is hosted on Slatedroid. It requires the 1.2 bootloader. I'm running CalkClem V6 http://forum.xda-developers.com/showthread.php?t=1024120 as a daily driver and it's amazing.
Click to expand...
Click to collapse
I may need to change anyway. I am now getting a pop-up error, 3 and 4 times when i first boot. SORRY! the application Google Services Framework (proccess com.google.process.gapps) has stopped unexpectedly. Please try again. < Force Close >
Not sure what I did?
I am actually surpriced no one has come out with a fully functional Honeycomb OS for this tablet yet. I keep reading and they are still have wireless issues or some other small issues. Personally I want to try and upgrade it to a working 2.3 Gingerbread version.
Question, what Android version is CalkClem V6 build on?
Your force close issue will be solved by formatting the sd card. This will delete everything on your internal SD so beware! Instructions are in this tutorial http://forum.xda-developers.com/showthread.php?t=865245
CalkClem V6 is running Froyo, which is the only version of android which is fully operational on the gtab (full hardware acceleration). Gingerbread and Honeycomb roms work pretty well, but for me Froyo is perfect. Give CalkClem v6 (or5) a try if you have some time, it's based on the stock OS, but it's blazing fast (and overclocked to 1.5Ghz by default). Battery life is excellent.
Make sure you pay attention to your bootloader when selecting a new ROM. To read up on your bootloader and why it's important check out goodintention's site: http://viewsonic-gtablet-for-dummies.webs.com/
Good luck!
woody213 said:
I may need to change anyway. I am now getting a pop-up error, 3 and 4 times when i first boot. SORRY! the application Google Services Framework (proccess com.google.process.gapps) has stopped unexpectedly. Please try again. < Force Close >
Not sure what I did?
I am actually surpriced no one has come out with a fully functional Honeycomb OS for this tablet yet. I keep reading and they are still have wireless issues or some other small issues. Personally I want to try and upgrade it to a working 2.3 Gingerbread version.
Question, what Android version is CalkClem V6 build on?
Click to expand...
Click to collapse
Froyo, 2.2
And don't be surprised with not having a fully functional HC rom yet. In fact, the GB roms are also not "fully" functional. Nvidea has not released drivers for those OSs for our hardware. If they never do, then we'll never have fully functional versions of those firmwares. It also appears that HC runs on a different kernel base. From what I've read, the kernels we have available now are .32 kernels, and HC needs a .36 kernel. the numbers don't mean much to me, but kernel devs saying that it's a difficult hurdle eto jump does. If Pershoot and Clemsyn aree leary about developing .36 kernels, then it must be pretty difficult.
brettdwagner said:
Congratulations on your new tablet. This issue has to do with the way the gtab indexes media and can be easily fixed by placing a file named ".nomedia" in the root directory of the sdcard.
Click to expand...
Click to collapse
Well it is still deleting the movies. I read your post and tried to create a folder called .nomedia on the MicroSd card and windows will not allow the . in the folder name so I tried just nomedia as a folder name and surprising the folder stayed but the media with in the folder was deleted.
brettdwagner said:
Congratulations on your new tablet. This issue has to do with the way the gtab indexes media and can be easily fixed by placing a file named ".nomedia" in the root directory of the sdcard.
Click to expand...
Click to collapse
Disregard the last post. I must really be having a bad day. Windows can't make that folder but the tablet itself can. when I did that I moved my sons movie "Planet Hulk" and it stayed in the folder no issues. Thanks again.
You just saved me A LOT of headaches and frustration!!! Scanning another thread for a solution about my external microSD causing my gTab to lock up, doing what you suggested, adding a file named .nomedia, worked perfectly!! 3 system reboots in a row anyway. When I use it tomorrow we'll see if it still works
My gTab would hang for as long as I let it whenever I would insert any of my microSD cards into the slot. Scanning SD Card would NEVER go away, gTab would lock up, simply hitting the power button would shut it down. But not like holding it down to shut it off normally, hitting like you want to put it into sleep mode, that type of hit would just shut it down. Take the card out - gTab would work perfect...........
Now I can leave the darn thing in there instead of using the USB adapter I bought for it and it's one more "annoyance" I've managed to overcome.
THANKS!!!!!!!!!!!!!!
BTW, stock operating system....yes, the god awful tap n tap 1.2 crap..... I only watch mp4 movies on it and that works great, so I'm not messing with ROM's.....yet.......
brettdwagner said:
Congratulations on your new tablet. This issue has to do with the way the gtab indexes media and can be easily fixed by placing a file named ".nomedia" in the root directory of the sdcard.
Click to expand...
Click to collapse
When I try to reinstall the firmware it will not work. I get a message update failed: (1). This is done in the recovery section. I have put the latest firmware in, but nothing happens other then the error message. When I turn on the Archos it just goes straight to the Archos A70S Recovery screen. I have totally reformatted the device several times. Any thoughts on this board? Thanks.
Aaron
Try to format the device and then install the firmware, also, make sure to have the right firmware so the archos stock .aos file and not the SDE firmware .aos file
have you tried redownloading the archos firmware again? maybe the download got corrupted?
Also try running the repair tools under recovery: specifically Check Disk?
do you have a (1) at the end of the aos file? "sdqsqdfkqsdomij(1).aos" like Firefox do, i had the same error like that
Thanks...but I think I have tried it all...no luck
Try using a different browser, like IE to download it.
I've got the same thing going on. Was trying to re-partition the app space and something didn't work for the 4th time. So I removed Android and the SDE and now I can't get it to boot. My problem is that I was running windows, not sure what you were using, and I changed the recovery location's format. So every time I go to load the file the archos will format the partition then windows says it will not read and formats the partition... I move the file and try to start the reload only to fail.
I'm going to run ADB hopefully tomorrow. I hardly know what I'm doing, but don't really care if I break it! Just playing around but if anyone has any ideas let me know!
If you removed sde and android, there is nothing to boot from.
You then have to go into the recovery, format the device from there and then restore the orginal Android by transfering the aos file from arcos.
Yeah, I might have done that 10 times. That is when the archos reformats itself to something and then windows can't read the drive.
After you have transfered the AOS File to the device and it installs the Archos Android
it reformats the device to something?
I think that the archos is formatting to ext3 but windows can't read it, so windows then formats to whatever and I move the file, then hit ok on archos and you get failed message.
I know that AOS files work because I have already used them once.
If any of you guys give up on trying to get life into your bricked gen8 devices, then shoot me a message... I might be interested in buying the device from you.
Have you tried tried to fully charge it before installing? I had that same problem and it got fixed by fully charging the device first.
Full charge and plugged in as we speak.
You now have 133 posts on xda and still are not able to post a complete detailed description of what you are doing and what is happening?
How should we help?
My suggestion if you get an Error, tell us what error exactly, as my crystal ball is on repair atm.
Ha! 393 posts and your only kind of a ****? Thanks!
All kidding aside It's not easy to describe whats going on, and I wasn't trying to hijack this thread but I think the original poster is way gone. I was only trying to say I had the same problem and was going to try a few things to get it working again, but this was only yesterday and I have not had luck. I never really even asked for help but appreciate everyones input.
So... Let me start again!
Archos 101.
Long ago I had Urik Droid 1.0 installed but it had since been removed. Before I messed everything up i had the latest Archos update and rooted. I was trying to create a large partition for apps and had just edited the init.rc and rebooted. Somewhere here I messed up! Boot loops start and I'm into recovery.
Recovery shows everything normal, but I'm unable to update archos via AOS file. So I totally reformat and remove SDE in an attempt to just start fresh. This is not the case and I figured it wouldn't be.
As I described before, using windows, in archos recovery this is what is displayed.
Archos A101IT Recovery
Would you like to recover system?
NO
REBOOT
UPDATE FIRMWARE
REPAIR SYSTEM
FORMAT SYSTEM
If you select updated firmware the archos will reformat to ext3. It then says USB connection: Press OK to disconnect. Windows then says that it is unable to use the disk and asks to re-format. I did, because I don't think I can do anything else, moved the AOS file over and hit ok. Update failed (1).
So today I installed linux in an attempt to move ext3 to ext3. I did get the file transfered and my archos even said plug into dc power. I did and waited... Update Failed (206). Not sure what this one is!
And that's really all I know. I can't even get the last thing I described to come up again. But I have all week on vacation.
And lastly I would like to thank you for the help
And I just got the AOS to install! Formated repair to Vfat, used repair option and moved AOS into archos. For whatever reason this time it worked. Rebooted and android just started up. Don't know if everything works yet but we will see!
Funny, you do the mistake and call others names.
fzelle said:
You now have 133 posts on xda and still are not able to post a complete detailed description of what you are doing and what is happening?
How should we help?
My suggestion if you get an Error, tell us what error exactly, as my crystal ball is on repair atm.
Click to expand...
Click to collapse
Let me make this clear...
I was kidding. Take a deep breath, relax and please try to help someone else if that is what you are on here to do.
I'm pretty sure what you said to me was worst then my little joke. It was hardly clever and I'm ok with it as it did make me laugh a little.
I didn't ask for your help.
I didn't need your help
You didn't help.
And I'm ok with it even if you are not.
I'm going fishing now. Good day everyone.
No, it was exactly what you needed, as before my message you didn't tell us what was happening on your side.
Please read what you have posted before and check yourself if you would be able to get any sence from that.
It is funny how some people handle kritik.
Below,I will list the steps I do to setup my webtop,I am using webtop2sd on a 32GB PNY Class 10 card, and used a 2GB Transcend (not sure on class,im sure its old) card to test with, same results with both pretty much,so I think something im doing is causing it to stop working.
What happends when it stops, is it just wont come up anymore. When I plug the phone into my lapdock, I either get a bluebox with an HDMI not found error (I'm assuming from the dock itself), or the red moto logo that just moves around. I would try resetting the phone, and reinstalling the executable through the webtop2sd app, and it still wont launch. This has happened about 5 times so far, I would get it setup how I would want it to be,then it stops working.
So here is what I would do (there is a phone reboot between each step pretty much)
1. Use my PC to partiton the SD card, ~22 GB FAT32 followed by an ~8GB ext3
2. Use webtop2sd to create the webtop, default settings, aside from the missing dock fix, which I only used 2-3 out of the 5 times I ran it
3. Once I am in the new webtop, I would install terminal and synaptic,then reboot.
4. Then I would run the webtop scripts, version 1.4, hitting yes to everything, then a reboot
5. I would check to see if synaptic is installed, the last time i did this, I had to use aptitude to install it.
6. Once I got synaptic up,I would use it to install the xfce4 package. Just about everytime I would go to install it,I would get an error on the "tzdata" package, the only way I could get past it,would be to uninstall tzdata, then most of the time,whatever I would go to install would reinstall it anyway. This does concern me, because when I remove tzdata, it appears to be tied to a critical package, which may be the source of my problem,but I am not sure.
7. Once I would get xfce4 installed,I would add xfdesktop and xfce-panel to the startup list (those may not be the exact package names,there is another thread I reference for that, can't remember atm, nor can I remember the exact name of that startup file, but its on this forum somewhere). I would also comment out the awmdock one and the webtop desktop one as well.
8. I would reboot,and it would actually boot up xfce4 just fine, the only gripe I have,is that I would usually get an error on the trash service needing thunar, when it is already installed. The one time,I was able to install open office, and test out some youtube videos.
9. At about this time, I would reboot my phone to see if it still works, then I would get the "bouncing moto logo of death" on my lapdock screen, and would have to start over.
One other unrelated note,about every other time I would reboot my phone, it would come up saying SIM card not installed, so I would reboot it again to fix the problem. So there were normally 2 reboots when a reboot is required.
So,I guess I would ask a few direct questions about my problem
1. Has anyone else had a problem with the tzdata package? Is there a way around it without uninstalling it?
2. Could the full xfce4 package be breaking the webtop? Do I only need certain packages out of it?
3. Even though I tested this on 2 different SD cards, could my problem be that the files are just getting corrupted on the card? Its pretty consistant though, I canpretty much say "Look,my awesome webtop is now setup how I want it to be, now watch me reboot my phone to see it not work anymore" everytime I go to set it up.
Info on my phone:
Stock firmware, unlocked bootloader, cwm installed (I thought I needed it,but not for webtop2sd) and rooted running latest webtop2sd. I havent messed with the stock webtop on the phone itself, i rather not since I like having it as a backup.
Btw, I am a bit of a linux n00b, I've pretty much just been reading what other people have been doing. Any help would be appreciated, thanx
You sure like to mod the webtop. Lol jk.
I have no issues and I have webtop with the Lapdock with the Ninja ROM. My phone is bootloader unlocked and rooted. I personally think you modded too much if that's possible. If I were you, I would start over and try webtop with stock firmware or a ROM with a fresh sd card. That way you can know if your phone has a hardware issue or if you modded too much. Hope this helps.
Sent from my Atrix XDA Premium App
I can assure you that your phone is more modded than mine is, since im running stock firmware. What I'm doing is really not that much modding, I'm just trying to get a better interface running on the webtop, which people have posted saying they have the same one working on theirs. Its also not that I can't get it working, its really not hard, just time consuming, I just need to know why it keeps breaking on phone reboots...
teeth_03 said:
I can assure you that your phone is more modded than mine is, since im running stock firmware. What I'm doing is really not that much modding, I'm just trying to get a better interface running on the webtop, which people have posted saying they have the same one working on theirs. Its also not that I can't get it working, its really not hard, just time consuming, I just need to know why it keeps breaking on phone reboots...
Click to expand...
Click to collapse
I honestly think you should try some of my suggestions. I think starting fresh is your best option. When something doesn't wok right or something goes wrong. Starting fresh can fix your issues.
Sent from my Atrix XDA Premium App
I've formatted the SD card about 6-8 times nowsince I got my lapdock 3 days ago
teeth_03 said:
I've formatted the SD card about 6-8 times nowsince I got my lapdock 3 days ago
Click to expand...
Click to collapse
Have you tried reflashing the phone yet with new firmwares or ROMS?
Sent from my Atrix XDA Premium App
why would I do that when the issue has something to do with the files on the SD card?
webtop2sd copies the webtop files from the phone, to the SD card,so the files on the phone are basically out of the equation at that point. So its not a problem with android,but with the other linux files from webtop on the SD card
Oh ok. Well have you tried an all new sd card yet?
Sent from my Atrix XDA Premium App
teeth_03 said:
Below,I will list the steps I do to setup my webtop,I am using webtop2sd on a 32GB PNY Class 10 card, and used a 2GB Transcend (not sure on class,im sure its old) card to test with, same results with both pretty much,so I think something im doing is causing it to stop working.
Click to expand...
Click to collapse
yeah......
I think I fixed it. by finding this little piece of info
http://forum.xda-developers.com/showpost.php?p=18465066&postcount=3
I believe tzdata has been my problem for he past like 3 days I've been messing with this
It has been running great for the past day. XFCE4 is a large improvement over the standard webtop.
Of course, I ran into another snag, I need to access windows network shares, and Samba doesn't seem to be functioning, specifically, the samba-common package wont install correctly.
This user was able to fix it:
http://forum.xda-developers.com/showpost.php?p=19132707&postcount=19
But I have no idea how to fix the read/sym links. Can any linux gurus here explain how that is fixed? Thanx guys!
teeth_03 said:
It has been running great for the past day. XFCE4 is a large improvement over the standard webtop.
Of course, I ran into another snag, I need to access windows network shares, and Samba doesn't seem to be functioning, specifically, the samba-common package wont install correctly.
This user was able to fix it:
http://forum.xda-developers.com/showpost.php?p=19132707&postcount=19
Click to expand...
Click to collapse
Yeah his post was kind of light on the details.
What it looks like is that when the /var/lib/dpkg/samba-common.postinst script is run by dpkg --configure -a it calls a program named ucf that in turn wants to run the symbolic link of "readlink" located in /usr/bin.
This is where i got stuck. I am by no means a linux guru.
I tried deleting the symlink to force ucf to use the "readlink" in the path, tried setting the symlink to point to the "readlink" located in /system/bin and in /system/xbin, and set the symlink to the busybox in /system/bin and to the custom busybox webtop2sd uses in /system/etc/webtop2sd but it did not help.
The output of dpkg changed slightly depending on which "readlink" ucf used but still the same error, "readlink: invalid option", and no samba-common.
Btw my busybox is 1.19.3
2.3.5 webtop on sdcard with fixed dependencies
A little help would be appreciated.
I was told on IRC that the actual problem is that the stock kernel does not include CIPs support, which is what is required for connectivity
but I still dont like the fact that samba package is still broken...
I'm using faux123's 0.2.3 kernel though, which might have CIPs support. Its hard to tell from the changelog and features listed in his kernel thread. Btw the 0.2.3 kernel fixes the broken top panel.
Hey! I am trying to get Cyanogenmod 12.1 on my stock Nook Tablet. I no longer use the Nook Tablet as often and would like to give it a new life by making it an Android. After reading a ton of articles and forums, I have tried a ton of them, but none of them seem to work successfully. One of them I tried was, Install CM for acclaim on the wiki.cyanogenmod.org website , the process went successfully until I rebooted and it continued to boot me to the regular Nook setup. I think it is because the Clockworkmod Recovery is outdated. I also see that Cyanogenmod's latest recovery is also available, but how do I put it on my SD card successfully. Please provide a step to step guide for me. Thank you!
BornReady_ said:
Hey! I am trying to get Cyanogenmod 12.1 on my stock Nook Tablet. I no longer use the Nook Tablet as often and would like to give it a new life by making it an Android. After reading a ton of articles and forums, I have tried a ton of them, but none of them seem to work successfully. One of them I tried was, Install CM for acclaim on the wiki.cyanogenmod.org website , the process went successfully until I rebooted and it continued to boot me to the regular Nook setup. I think it is because the Clockworkmod Recovery is outdated. I also see that Cyanogenmod's latest recovery is also available, but how do I put it on my SD card successfully. Please provide a step to step guide for me. Thank you!
Click to expand...
Click to collapse
I just did this about a week ago (finally) and there are no better instructions for getting started than those provided by digixmax here. Just ignore the statements about CM 11 and forge ahead. Later in that thread there are a variety of recommendations for file substitutions in the method if you are aiming for CM 12 instead of 11. I followed the ones here. These also work.
My own discovery was that you should ignore the TWRP error messages about being unable to mount '/bootdata'. I finally came across that somewhere and it proved to be true for me.
Take it slow. Gather together all the files you will need first. Then prep the SD card (don't forget to set the flag). Then copy the files over in the order specified. It matters. Then go for it! (don't neglect to backup the stock system before wiping things--you may be glad you did).
My start-up with CM 12.1 was really rough and I thought I might abandon it but after a few days and quite a number of reboots things settled down. Maybe that has something to do with coming from CM 10.2.1, maybe not. Anyway, the system is no worse than CM 10.2.1 and I don't have trouble with cold or warm boots hanging like I used to with CM 10.2.1.
My pet peeves are listed here and/or here but may be idiosynchratic to my device or particular flash.
nmyshkin said:
I just did this about a week ago (finally) and there are no better instructions for getting started than those provided by digixmax here. Just ignore the statements about CM 11 and forge ahead. Later in that thread there are a variety of recommendations for file substitutions in the method if you are aiming for CM 12 instead of 11. I followed the ones here. These also work.
My own discovery was that you should ignore the TWRP error messages about being unable to mount '/bootdata'. I finally came across that somewhere and it proved to be true for me.
Take it slow. Gather together all the files you will need first. Then prep the SD card (don't forget to set the flag). Then copy the files over in the order specified. It matters. Then go for it! (don't neglect to backup the stock system before wiping things--you may be glad you did).
My start-up with CM 12.1 was really rough and I thought I might abandon it but after a few days and quite a number of reboots things settled down. Maybe that has something to do with coming from CM 10.2.1, maybe not. Anyway, the system is no worse than CM 10.2.1 and I don't have trouble with cold or warm boots hanging like I used to with CM 10.2.1.
My pet peeves are listed here and/or here but may be idiosynchratic to my device or particular flash.
Click to expand...
Click to collapse
I literally just finished sending a message to digixmax when you posted this. I remember seeing you in the other forum, trying to get CM12.1 to install. I did all this instructions over and over for hours, but I keep getting stuck at the CyanoBoot section. I get the Boot Menu, but then the SDC Recovery option isn't available, I see it, but it isn't clickable.
BornReady_ said:
I literally just finished sending a message to digixmax when you posted this. I remember seeing you in the other forum, trying to get CM12.1 to install. I did all this instructions over and over for hours, but I keep getting stuck at the CyanoBoot section. I get the Boot Menu, but then the SDC Recovery option isn't available, I see it, but it isn't clickable.
Click to expand...
Click to collapse
OK, so as soon as the cyanoboot screen appears you hold down the N button, right?
Also, did you boot with the power cable connected?
nmyshkin said:
OK, so as soon as the cyanoboot screen appears you hold down the N button, right?
Also, did you boot with the power cable connected?
Click to expand...
Click to collapse
Yes, I booted with the power cable connected, I tried on being connected to the laptop and power wall as well. I also held down the N button, which is why I got to the Boot Menu.
Bear with me
Are you sure you got the SD card version of TWRP?
Yes, 100% sure.
BornReady_ said:
Yes, 100% sure.
Click to expand...
Click to collapse
Well that was interesting! We're "live" apparently
I want to help but I'm not digixmax... I'll bet he has an idea. Wait for him to get back to you while I rummage around.
Lol, thanks for the help anyways though. I will have to wait for digixmax.
Wow, everytime you mention digixmax, he replies. He just privated messaged me in return.
If you can get to the CyanoBoot menu but its menu entry for "SDC recovery" is greyed out then it's because CyanoBoot (flashing_boot.img) cannot find a recovery.img file on your bootable SDcard.
Which version of SD-based recovery did you download and use?
You might want to wait for and check against the answer to my inquiry post at http://forum.xda-developers.com/showpost.php?p=65016892&postcount=41 (I no longer have a NT and as such cannot vouch for any specific recent recovery versions).
I'm sorry, I should have been more precise. I don't know if it will help, but this is the TWRP recovery image I used successfully when I tried this process. That's v. 2.8.6.0
digixmax said:
If you can get to the CyanoBoot menu but its menu entry for "SDC recovery" is greyed out then it's because CyanoBoot (flashing_boot.img) cannot find a recovery.img file on your bootable SDcard.
Which version of SD-based recovery did you download and use?
You might want to wait for and check against the answer to my inquiry post at http://forum.xda-developers.com/showpost.php?p=65016892&postcount=41 (I no longer have a NT and as such cannot vouch for any specific recent recovery versions).
Click to expand...
Click to collapse
I have seen everyone else's folders and they seem to include "flashing_boot.img" However, the file I downloaded from your page only has "flashing_boot" When I try to rename the file, the Nook Tablet won't even turn on anymore at all. Matter of fact, I can't even get to the Boot Menu now, it keeps having that red line that states, "booti: bad boot image magic (in memory)" I'm losing hope...
BornReady_ said:
I have seen everyone else's folders and they seem to include "flashing_boot.img" However, the file I downloaded from your page only has "flashing_boot" When I try to rename the file, the Nook Tablet won't even turn on anymore at all. Matter of fact, I can't even get to the Boot Menu now, it keeps having that red line that states, "booti: bad boot image magic (in memory)" I'm losing hope...
Click to expand...
Click to collapse
Don't give up. If you're using a Windows machine to prepare the card then whether the .IMG is displayed or not depends on your settings. It does not show on mine but a look at the file properties shows it is an .IMG file.
So that's the wrong tree. SDCards have been known to be problematic so if you have another around you might want to give it a try. You also might do a slow (complete) format on it before preparing it from scratch.
The other thing, of course, is the integrity of the individual files. Checking the MD5 values is a pain but sometimes reveals a bad download.
nmyshkin said:
Don't give up. If you're using a Windows machine to prepare the card then whether the .IMG is displayed or not depends on your settings. It does not show on mine but a look at the file properties shows it is an .IMG file.
So that's the wrong tree. SDCards have been known to be problematic so if you have another around you might want to give it a try. You also might do a slow (complete) format on it before preparing it from scratch.
The other thing, of course, is the integrity of the individual files. Checking the MD5 values is a pain but sometimes reveals a bad download.
Click to expand...
Click to collapse
I have tried everything. It doesn't seem to work. I'm also sure there aren't issues with downloading because I have redownloaded the files over 7 times. Is there a way I can download the folder of files that you used to install cyanogenmod?
BornReady_ said:
I have tried everything. It doesn't seem to work. I'm also sure there aren't issues with downloading because I have redownloaded the files over 7 times. Is there a way I can download the folder of files that you used to install cyanogenmod?
Click to expand...
Click to collapse
I've already shut down my computer for the night. I'll have a look at the size that an image of the card would be. Maybe that's the easiest way if there's room in my dropbox. If you've read through the CM11/12 thread you know I ran into problems and if you were to look at the CM10 thread you'd find me floundering around there also, so I know how frustrating it can be. And then suddenly it just works.
I'll let you know tomorrow.
BornReady_ said:
I have seen everyone else's folders and they seem to include "flashing_boot.img" However, the file I downloaded from your page only has "flashing_boot" When I try to rename the file, the Nook Tablet won't even turn on anymore at all. Matter of fact, I can't even get to the Boot Menu now, it keeps having that red line that states, "booti: bad boot image magic (in memory)" I'm losing hope...
Click to expand...
Click to collapse
As @nmyshkin pointed out, it's most likely because your Windows Explorer is configured not to display the file-name extension, so when you try to rename "flashing_boot" to "flashing_boot.img" you in effect end up with a file with name "flashing_boot.img.img".
This is likely also the root cause of your original problem: if you now just rename the TWRP recovery file you had downloaded (which already has the hidden .img extension) to "recovery" (and not "recovery.img" lest you end up with a file named "recovery.img.img") then CyanoBoot will see the recovery file.
For avoidance of doubt, just set your Windows Explorer to display file-name extension.
digixmax said:
As @nmyshkin pointed out, it's most likely because your Windows Explorer is configured not to display the file-name extension, so when you try to rename "flashing_boot" to "flashing_boot.img" you in effect end up with a file with name "flashing_boot.img.img".
This is likely also the root cause of your original problem: if you now just rename the TWRP recovery file you had downloaded (which already has the hidden .img extension) to "recovery" (and not "recovery.img" lest you end up with a file named "recovery.img.img") then CyanoBoot will see the recovery file.
For avoidance of doubt, just set your Windows Explorer to display file-name extension.
Click to expand...
Click to collapse
You are totally correct. I enabled Windows Explorer to display file-name extension and the TWRP recovery file turned out as "recovery.img.img" I am going to try it out now and reply with if it works or not.
Alright, I have been trying and following the instructions clearly, but it keeps giving me the red line stating, "booti: bad boot image magic (in memory)" now. I have gotten to the Boot Menu before, but now it won't even let me get there. What does this message mean?
BornReady_ said:
Alright, I have been trying and following the instructions clearly, but it keeps giving me the red line stating, "booti: bad boot image magic (in memory)" now. I have gotten to the Boot Menu before, but now it won't even let me get there. What does this message mean?
Click to expand...
Click to collapse
Is flashing_boot file on your SD card correctly named "flashing_boot.img", and not "flashing_boot.img.img"?