Do i need to resign update.zip after removing bloatware?
You mean, you unpack the zip, remove some apks and then pack it again as zip? afaik: This won't work.
If you use the nice dsixda kitchen it is quiet simple to make signed packages or even without signing (not recommended as you will need to apply these in a special way, afaik)
Snoopo said:
You mean, you unpack the zip, remove some apks and then pack it again as zip? afaik: This won't work.
If you use the nice dsixda kitchen it is quiet simple to make signed packages or even without signing (not recommended as you will need to apply these in a special way, afaik)
Click to expand...
Click to collapse
No, Actually like just removing APKs directly from the .zip (with WinRAR)
no need. it will work anyway.
Chumby_666 said:
no need. it will work anyway.
Click to expand...
Click to collapse
Naah, i get a lot of symlink errors while trying to create my Sense Rom.
((
owain94 said:
A lot of BORING work!
Click to expand...
Click to collapse
))
ServerBoost100 said:
Naah, i get a lot of symlink errors while trying to create my Sense Rom.
(())
Click to expand...
Click to collapse
Bumpity Bummmmmmp
Use update script from froyocomb or my rom. Itll set correct symlinks
Sent from my U20i using XDA Premium App
slade87 said:
Use update script from froyocomb or my rom. Itll set correct symlinks
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Ok, i will (Just need to reroot my phone and Re install xRec first (Reflashed stock today because of a little battery drain)
slade87 said:
Use update script from froyocomb or my rom. Itll set correct symlinks
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
With your update script it gets error at line 92 with /system/xbin/echo (cant find it error)
ServerBoost100 said:
With your update script it gets error at line 92 with /system/xbin/echo (cant find it error)
Click to expand...
Click to collapse
add from my rom /system/xbin/echo to your rom
do this with everything missing.
slade87 said:
add from my rom /system/xbin/echo to your rom
do this with everything missing.
Click to expand...
Click to collapse
except for it is not in yours.
((4.0))
ServerBoost100 said:
except for it is not in yours.
((4.0))
Click to expand...
Click to collapse
use /system/bin/busybox from mine in your rom and it should run through fine
slade87 said:
use /system/bin/busybox from mine in your rom and it should run through fine
Click to expand...
Click to collapse
Ok. I will try that tommorow.
ServerBoost100 said:
Ok. I will try that tommorow.
Click to expand...
Click to collapse
E: Can't Symlink /system/diff
E: Failure atline 91:
symlink busybox SYSTEM: /xbin/diff
Installation aborted.
It is not in mine but not in yours too.
ServerBoost100 said:
E: Can't Symlink /system/diff
E: Failure atline 91:
symlink busybox SYSTEM: /xbin/diff
Installation aborted.
It is not in mine but not in yours too.
Click to expand...
Click to collapse
Bumpity Bump!!
ServerBoost100 said:
Bumpity Bump!!
Click to expand...
Click to collapse
sense rom is weird..
it can't make symlinks out of box... all symlink which exist is original rom must be used no more no less...
Chumby_666 said:
sense rom is weird..
it can't make symlinks out of box... all symlink which exist is original rom must be used no more no less...
Click to expand...
Click to collapse
Which means a pure re-port...
ServerBoost100 said:
Which means a pure re-port...
Click to expand...
Click to collapse
Sorry People, i dont think sense will happen in the near future, I have to say it. It's symlinks is wrong always. - It cant make it out of the box. And (quoting from owain)
owan94 said:
It's a lot of boring work
Click to expand...
Click to collapse
Related
Discontinued
New Recovery Installer HERE
muchas gracias
cool thanks. but errm installing the titanium version of busybox won't work as its a) 1.6 that does not work with xrec and b) this gets installed primary only in a special titanium backup folder where only titanium uses it. (you can copy it to system but you then will break your xrec install - wont start)
Snoopo said:
cool thanks. but errm installing the titanium version of busybox won't work as its a) 1.6 that does not work with xrec and b) this gets installed primary only in a special titanium backup folder where only titanium uses it. (you can copy it to system but you then will break your xrec install - wont start)
Click to expand...
Click to collapse
I can't understand what you mean sorry ?, what errm means ?
D4rKn3sSyS said:
I can't understand what you mean sorry ?, what errm means ?
Click to expand...
Click to collapse
errm = ehm or ehem... meaning to clear one's throat
amazing work！ dont need to complex work to setup xrecovery by root explorer anymore
Sent from my U20i using Tapatalk
can not download the attached files...
Evillest said:
can not download the attached files...
Click to expand...
Click to collapse
Use edit option , anyway, weird, I can easily do it
Evillest said:
can not download the attached files...
Click to expand...
Click to collapse
forgive me , it's my fault.
attached files can download now.
64 Downloads and only 4 thanks, and 2 comments... this is sad
D4rKn3sSyS said:
64 Downloads and only 4 thanks, and 2 comments... this is sad
Click to expand...
Click to collapse
It just works fine for me with CM7 v14.2
thanks buddy awesome work
D4rKn3sSyS said:
64 Downloads and only 4 thanks, and 2 comments... this is sad
Click to expand...
Click to collapse
Dark don't worry! this installer will make things very much easier for the new ones.
XDA ♥
I will try to install later.
My phone has xRecovery this software will update the xRecovery?
Because I`m using CM7 v14.2, but when I enter in xRecovery appears CM6 in background.
Thanks
im using cm7 and its work..thanx bro dark..
axpira said:
I will try to install later.
My phone has xRecovery this software will update the xRecovery?
Because I`m using CM7 v14.2, but when I enter in xRecovery appears CM6 in background.
Thanks
Click to expand...
Click to collapse
If you have CM7, should be the same, difference is that this xRecovery, dont have custom background as Cm7
D4rKn3sSyS said:
64 Downloads and only 4 thanks, and 2 comments... this is sad
Click to expand...
Click to collapse
It means they're not satisfied or they don't appreciate it.
New version uploaded!!
nice work i like it
Aint workin' for me, error CP not found?
How can I deodex my HTC Aria?
It's running CM7.1.0 RC1.
I wanna install themes that need Zdunes' patcher, so yeah.
Thanks in advance!
Arivien said:
How can I deodex my HTC Aria?
It's running CM7.1.0 RC1.
I wanna install themes that need Zdunes' patcher, so yeah.
Thanks in advance!
Click to expand...
Click to collapse
All Cyanogenmod ROMs are deodexed, so you don't need to do anything.
It doesn't seem that way,because when I tried to use zdunes patcher, it couldn't find anything and told me my rom was odexed.
Sent from my Liberty using XDA App
Arivien said:
It doesn't seem that way,because when I tried to use zdunes patcher, it couldn't find anything and told me my rom was odexed.
Click to expand...
Click to collapse
In an odexed ROM, there will be a matching odex file for every apk file in /system/app. For example, there will be both Browser.apk and Browser.odex. In a deodexed ROM, the odex files aren't there -- just the apk files. Feel free to check your ROM yourself to verify.
Ah, it seems it's not odexed...
Thanks, but do you have any idea why I can't patch? Do I have to run as administrator?
Arivien said:
Do I have to run as administrator?
Click to expand...
Click to collapse
That is like asking if you have to be rooted. Well, if it requires root (quite likely), then yes, you would have to allow it.
Arivien said:
Ah, it seems it's not odexed...
Thanks, but do you have any idea why I can't patch? Do I have to run as administrator?
Click to expand...
Click to collapse
Since I know literally nothing about this "Zdunes' patcher", I really can't help you there.
I'm sorry, but I still don't understand what's wrong.
I'm plugging my phone into my computer, turning on USB storage, running ZDunes Patcher as admin, and it still says my ROM is odexed...
Arivien said:
I'm sorry, but I still don't understand what's wrong.
I'm plugging my phone into my computer, turning on USB storage, running ZDunes Patcher as admin, and it still says my ROM is odexed...
Click to expand...
Click to collapse
Have you tried reflashing your rom (or flashing a new deoxed rom)?
No, I'll try that...would I have to wipe?
Arivien said:
would I have to wipe?
Click to expand...
Click to collapse
Only if you are flashing a rom other than CyanogenMod 7.
Arivien said:
No, I'll try that...would I have to wipe?
Click to expand...
Click to collapse
cyanogenmod is fully deodexed. There is some other issue with the utility you are trying to use, and it's not giving you an accurate error message.
I have been cooking a customized ICS ROM using dsixda's kitchen and all I done was deodex the ROM and add some other stuff like bash, nano etc. I then built and signed it. When I attempt to flash it tells me there is an error in the .zip file and displays (status 0). I am guessing I have done something wrong when building the ROM in dsixda's kitchen.
Does anyone know what a status 0 error means in CWM and how I can fix it?
Wrong update-binary
私のEVO 3Dから送信される。
Ahh right thank you!
Sent from my Nexus S using xda premium
dastin1015 said:
Wrong update-binary
私のEVO 3Dから送信される。
Click to expand...
Click to collapse
what shoukd it be update or updater
Sent from my GT-S5670 using xda premium
Mr.Oug said:
what shoukd it be update or updater
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
update-binary, update-script and updater-script are three different things.
私のEVO 3Dから送信される。
I had faced the same problem what should i do ....?
I have the same problem!
how can i solve this problem?
same here, my galaxy note is bricked
I have the same problem.. on LG 2x
find out if your device takes update-script(Amend)or updater-script(Edify)
Sent from my HTC VLE_U using Tapatalk 2
ourcumnt THIRD
How to find out if your device takes update-script(Amend)or updater-script(Edify)?? :good:
Pranjal Joshi said:
How to find out if your device takes update-script(Amend)or updater-script(Edify)?? :good:
Click to expand...
Click to collapse
Look in the Meta-inf then com>Google > android then you will see the script one the binary and the update or updater script
If you got update-script then amend
Updater-script you got edify
Sent from my PG86100 using Tapatalk 2
try to find an update-binary from another custom rom and use that one
globula_neagra said:
try to find an update-binary from another custom rom and use that one
Click to expand...
Click to collapse
please don't try that, i just used JMP xtreme's update binary file on my custom rom, and i just CEMENTED my Micromax canvas 2.
i'm also stuck at the status 0 error.
SOMEONE HELP US !!!!!!
FirmShark said:
I have been cooking a customized ICS ROM using dsixda's kitchen and all I done was deodex the ROM and add some other stuff like bash, nano etc. I then built and signed it. When I attempt to flash it tells me there is an error in the .zip file and displays (status 0). I am guessing I have done something wrong when building the ROM in dsixda's kitchen.
Does anyone know what a status 0 error means in CWM and how I can fix it?
Click to expand...
Click to collapse
Status 0 means that you have a wrong script.Put a correct script in "/META-INF/com/google/android" floder in your rom.
quadratic_function said:
Status 0 means that you have a wrong script.Put a correct script in "/META-INF/com/google/android" floder in your rom.
Click to expand...
Click to collapse
I use dsxda and when i build the rom i use updater script, the ROM was coocked by 0, from system folder and boot.img, any solutions?
The update-binary for mtd type phones from dsixda kitchen no longer run on some new mtd phones. You may try to replace the update binary with other update binary and modify the scripts to mount using busybox and the format partition command should be removed and do the format from cwmr menu.
I´ve got update-binary, update-binary.orig, updater-script, updater-script.orig and update-script
What should i do to fix the status 0 error?
thanks for help
sgt_R04CH said:
please don't try that, i just used JMP xtreme's update binary file on my custom rom, and i just CEMENTED my Micromax canvas 2.
i'm also stuck at the status 0 error.
SOMEONE HELP US !!!!!!
Click to expand...
Click to collapse
Ofc, you have to use one, from the same phone, eg: OTA UPDATE
Instalation aborted
how to solve this problem?
Is there a way to deodex stock ROM without flashing another ROM? Like a batch file script or something? I don't want to leave the stock ROM but need to flash some Mods.
ShyamSasi said:
Is there a way to deodex stock ROM without flashing another ROM? Like a batch file script or something? I don't want to leave the stock ROM but need to flash some Mods.
Click to expand...
Click to collapse
using Dxda Kitchen...
sandy7 said:
using Dxda Kitchen...
Click to expand...
Click to collapse
I used that one. I was wondering to do this maybe a sh script without actually taking the whole ROM out like we have for Zipalign init.d script.
ShyamSasi said:
I used that one. I was wondering to do this maybe a sh script without actually taking the whole ROM out like we have for Zipalign init.d script.
Click to expand...
Click to collapse
use the search button....if iam not i have used a cwm flashable zip to deoxed stock rom
sandy7 said:
use the search button....if iam not i have used a cwm flashable zip to deoxed stock rom
Click to expand...
Click to collapse
I tried .. I'm looking something like this http://briefmobile.com/auto-deodex-tool-for-htc-one-x-att but the download link is not working.
There are lots like it..but for me kitchen is the best
sent straight from hell
ShyamSasi said:
I tried .. I'm looking something like this http://briefmobile.com/auto-deodex-tool-for-htc-one-x-att but the download link is not working.
Click to expand...
Click to collapse
Well u can try this..http://forum.xda-developers.com/showthread.php?t=1500475
sent straight from hell
deleted
#reserved
OMG so fast ?
Does this have the libsecure fix?
PHP:
Erwandu83200 said:
OMG so fast ?
Click to expand...
Click to collapse
yeah for you all community
50% up.
charackthe said:
Does this have the libsecure fix?
Click to expand...
Click to collapse
nope.. its everything use stock one
ridwan.sn said:
PHP:
yeah for you all community
50% up.
nope.. its everything use stock one
Click to expand...
Click to collapse
Thanx for your work and for tell the % of uploading :fingers-crossed:
ridwan.sn said:
PHP:
yeah for you all community
50% up.
nope.. its everything use stock one
Click to expand...
Click to collapse
Hmm. So it loses all the paired Bluetooth devices on reboot since it is rooted, sucks that we have to wait for a fix.
charackthe said:
Hmm. So it loses all the paired Bluetooth devices on reboot since it is rooted, sucks that we have to wait for a fix.
Click to expand...
Click to collapse
so modded pie libsecure_storage.so and libsecure_storage_jni.so and editing in build.prop to ro.securestorage.support=false
dosent work anymore? on early pie builds that was the fix b4 magisk modules cameout to fix it
so for fun copy the libs manually from within the zip module to system and edit the prop:
https://github.com/Magisk-Modules-Repo/libsecure_storage/archive/libsecure_storage-v1.8.zip
Erwandu83200 said:
Thanx for your work and for tell the % of uploading :fingers-crossed:
Click to expand...
Click to collapse
link updated ...
charackthe said:
Hmm. So it loses all the paired Bluetooth devices on reboot since it is rooted, sucks that we have to wait for a fix.
Click to expand...
Click to collapse
nope work fine here mate..
bober10113 said:
so modded pie libsecure_storage.so and libsecure_storage_jni.so and editing in build.prop to ro.securestorage.support=false
dosent work anymore? on early pie builds that was the fix b4 magisk modules cameout to fix it
so for fun copy the libs manually from within the zip module to system and edit the prop:
https://github.com/Magisk-Modules-Repo/libsecure_storage/archive/libsecure_storage-v1.8.zip
Click to expand...
Click to collapse
i always added that tweak on build.prop and default prop.
and i work fine here .. lib_secure storage is needed for custom kernel build to fix wifi and bluetooth in my old S7. and i think its same too with N9.
just test rom u will know :fingers-crossed:
ridwan.sn said:
link updated ...
nope work fine here mate..
i always added that tweak on build.prop and default prop.
and i work fine here .. lib_secure storage is needed for custom kernel build to fix wifi and bluetooth in my old S7. and i think its same too with N9.
just test rom u will know :fingers-crossed:
Click to expand...
Click to collapse
Thanx you a lot I downloading it I tell you if any bug
Erwandu83200 said:
Thanx you a lot I downloading it I tell you if any bug
Click to expand...
Click to collapse
cheers.. just tell me at here and welcome
Thanks for your work, flashed the rom and all seems just fine. However root seems to be a bit messed up, I can't seem to delete any apps or folders due to the lack of the right permissions and there seems to be no way to change them.
I've tried removing chrome from system/app using root explorer and it fails. Any idea how to fix this?
patensas said:
Thanks for your work, flashed the rom and all seems just fine. However root seems to be a bit messed up, I can't seem to delete any apps or folders due to the lack of the right permissions and there seems to be no way to change them.
I've tried removing chrome from system/app using root explorer and it fails. Any idea how to fix this?
Click to expand...
Click to collapse
i believe that if you unroot and re root using topjohnwoos installer zip in recovery it will fix it. but the side effect might be broken bluetooth pairings on reboot.
bober10113 said:
i believe that if you unroot and re root using topjohnwoos installer zip in recovery it will fix it. but the side effect might be broken bluetooth pairings on reboot.
Click to expand...
Click to collapse
Would you mind pointing a lazy user toward that topjohnwoos installer?
patensas said:
Would you mind pointing a lazy user toward that topjohnwoos installer?
Click to expand...
Click to collapse
hes the magisk's dev:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
lol i dont know why I didn't just say magisk
bober10113 said:
hes the magisk's dev:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
lol i dont know why I didn't just say magisk
Click to expand...
Click to collapse
Ah that makes sense, I'm tired and didn't link topjohnwoos to John Wu lol thanks anyway
patensas said:
Thanks for your work, flashed the rom and all seems just fine. However root seems to be a bit messed up, I can't seem to delete any apps or folders due to the lack of the right permissions and there seems to be no way to change them.
I've tried removing chrome from system/app using root explorer and it fails. Any idea how to fix this?
Click to expand...
Click to collapse
did you tried other app and lastest? i havent tested it but im sure its wont mount system as i gues.
bober10113 said:
i believe that if you unroot and re root using topjohnwoos installer zip in recovery it will fix it. but the side effect might be broken bluetooth pairings on reboot.
Click to expand...
Click to collapse
bober10113 said:
hes the magisk's dev:
its has prerooted with magisk
patensas said:
Ah that makes sense, I'm tired and didn't link topjohnwoos to John Wu lol thanks anyway
Click to expand...
Click to collapse
yeah lol ..
Click to expand...
Click to collapse
ridwan.sn said:
did you tried other app and lastest? i havent tested it but im sure its wont mount system as i gues.
bober10113 said:
hes the magisk's dev:
its has prerooted with magisk
yeah lol ..
Click to expand...
Click to collapse
but i think the issue he was explaining is between sustem root and magisk manager. thats why i suggested to reinstall.
or maybe just update magisk manager to a canary build?
anyways im on a n960n so i cant flash the roms system.img due to the fact that partition system size is a bit smaller on n960n compared to n960f
Click to expand...
Click to collapse
bober10113 said:
so modded pie libsecure_storage.so and libsecure_storage_jni.so and editing in build.prop to ro.securestorage.support=false
dosent work anymore? on early pie builds that was the fix b4 magisk modules cameout to fix it
so for fun copy the libs manually from within the zip module to system and edit the prop:
https://github.com/Magisk-Modules-Repo/libsecure_storage/archive/libsecure_storage-v1.8.zip
Click to expand...
Click to collapse
I manually moved the files and edited the build.prop
Firstly, there is no jni files in lib or lib64 folders. Secondly, I replaced the files both in vendor and system and modified the build.prop, went into the system and found a start secure_storage command I replaced it with stop but nothing worked.
Any other link?