I tried flashing the unofficial LG Ginegerbread update, and since then I can't disable the airplane mode. I get no cell reception. I even restored from a backup to mik's cyanogen mod, no luck there either. Then finaly used a KDZ update to restore to stock LG Rom, and even there I get no cell reception. What can I do?
I think you flashed wrong radio (not fmradio the baseband). Flash unofficial gingerbread made by Andy its there somewhere in the post maybe. Or clean flash a rom with formatting /system.
Sent from my LG-P500 using XDA Premium App
Nope. Formatted using clokworkmod recovery and installed mik's gingerbread. But it still doesn't work.
EDIT: Just noticed that in about phone it says that the baseband version is unknown. Is that normal? If not how to flash new baseband?
chejo said:
Nope. Formatted using clokworkmod recovery and installed mik's gingerbread. But it still doesn't work.
EDIT: Just noticed that in about phone it says that the baseband version is unknown. Is that normal? If not how to flash new baseband?
Click to expand...
Click to collapse
Flash kdz with 2.2 ROM, then go through rooting process.
mik_os said:
Flash kdz with 2.2 ROM, then go through rooting process.
Click to expand...
Click to collapse
Flashed a kdz v10H . But even on stock rom i get no gsm connection. On the stock rom even the bluetooth doesn't work.
EDIT: Just noticed that the phone doesn't recognise my sim card. Tried it on another phone and the card worked.
Managed to fix it. I used the program that I used to flash the leaked 2.3.3 rom. And restored the nv2 file. Note to self: Read first, ask questions later. I found this solution in the main thread for this rom.
chejo said:
Managed to fix it. I used the program that I used to flash the leaked 2.3.3 rom. And restored the nv2 file. Note to self: Read first, ask questions later. I found this solution in the main thread for this rom.
Click to expand...
Click to collapse
Hi there! I have the same problem just that I can't nv restore the phone because I didn't back it up. Do you still have the nv backup file so you can attach it here? so I can fix my damn phone.. Thanks!
hello,
i am facing same issue as people above... and i am afraid i dont have any NV2 file for restore... could you please tell me what to do now
GUYS,
i am really now strugelling with this hell machine....
i am lost like in hell.... still without gsm signal, i have tried so many combinations but nothing... maybe i did it even worse because if my experiments...
so currently, my status is that i have flashed 2.3.3 russian leaked version.... i played a bit with IMEI RESTORE_1.2b app, tried to restore my IMEI... but accidentaly, now my IMEI in LGMDP says 35404304088138-2-353, where (-2-353) was not there previously... so i am thinking what i did wrong... i also cannot restore any NV files, it says NV backup file does not exists...
completely lost in this maze...
Is there anybody who could help me to go out of it PLEASE?
Step by step... ?
from really cleaning of my mobile, deleting everything ,installing rom + fixing gsm fix...
i know there is a lot of tutorials, but as i wrote, i probably did it worse than it was in the beginning so i would appreciate deep and exact steps for dumbass like me
I am ashamed, but still hope for getting it to work back again...
i have uploaded my nv2 file try flashing it but first take backup of yours
http://www.multiupload.com/SPIL7B21S0
samrox144 said:
i have uploaded my nv2 file try flashing it but first take backup of yours
http://www.multiupload.com/SPIL7B21S0
Click to expand...
Click to collapse
flash it over LGDMP -> select image -> choose only your file as NV default -> start ??
all to do this when phone running?
if yes, i did this but no change...
try
http://forum.xda-developers.com/showthread.php?t=534704
to create NV2 or a QCN file with your imei.
mak.3736 said:
try
http://forum.xda-developers.com/showthread.php?t=534704
to create NV2 or a QCN file with your imei.
Click to expand...
Click to collapse
i tried to create NV2 file with IMEI same as my phone... and flashed it over LGMDP as flash image - NV file, but no success.... also i cannot restore any NV files, it says NV files does not exists
---------- Post added at 02:39 PM ---------- Previous post was at 02:30 PM ----------
i think i do something bad and the NV2 do not go into the phone.... it says all good, NV restore complete etc, it shut down the phone, but still no gsm
i triedto create new NV2 file over KS20 tool, with "11111" in the IMEI number , and flash it via steps i described, but when i look into the phone there is still the old one... so definitely i am not doing it correctly
mafosh said:
i tried to create NV2 file with IMEI same as my phone... and flashed it over LGMDP as flash image - NV file, but no success.... also i cannot restore any NV files, it says NV files does not exists
Click to expand...
Click to collapse
I dont think you can select nv2 file directly from lgmdp.
put the file in this order n try
create new folder
rename folder: <your_imei_(on_which_nv2_is_created)>
create new folder in <your_imei_(on_which_nv2_is_created)> named <port no.> on which your phone is connected (ex:for com4 name folder as " _COM_4_" (without quotes)
now place nv2 file in this folder <port no.>
so now u r nv2 file is in
" \<your_imei_(on_which_nv2_is_created)>\<port no.>\ "
then try to flash file from lgmdp .
I m not sure whether its gonna work or not but if u r interested give it a try bcoz i found my backed nv2 file stored in this pattern,
---------- Post added at 01:55 PM ---------- Previous post was at 01:51 PM ----------
by the way which rom are you using and which baseband version are you flashing right now, can u specify
are you using correct combination ?
i am not flashing any baseband, right now, i selected gingerbread 2.3.3 leaked russian, i selected delete EFS ALL at the bottom, also marked default NV file when selecting this firware... now flashing is in process
edit:.....
so, sucesfully flashed, in LGMDP now i have again my IMEI back as ( original IMEI number 35404304088138 which is good i think) .... i can also click on NV restore it shows some NV files from the morning etc....
but the major think- no GSM still.... so... what to do now, i am ready for commands
mafosh said:
i am not flashing any baseband, right now, i selected gingerbread 2.3.3 leaked russian, i selected delete EFS ALL at the bottom, also marked default NV file when selecting this firware... now flashing is in process
edit:.....
so, sucesfully flashed, in LGMDP now i have again my IMEI back as ( original IMEI number 35404304088138 which is good i think) .... i can also click on NV restore it shows some NV files from the morning etc....
but the major think- no GSM still.... so... what to do now, i am ready for commands
Click to expand...
Click to collapse
ok you hav 2.3.3 but which baseband version is it showing in your phone
go to settings -> about phone -> baseband version ?
baseband - unknown
mafosh said:
baseband - unknown
Click to expand...
Click to collapse
then do one thing flash v20 baseband from lgmdp
follow http://forum.xda-developers.com/showthread.php?t=1217504
read the post carefully donot disconnect mobile until its shown "download complete" after pressing download
and also donot forget to disable "lg virtual modem"
right click my computer->manage->device manager->modems->disable lg modems
everything what is described - done .... but still baseband unknown....
why dont u try flashing any other different v2.3.3 rom
if then also u dont get gsm then i think last option to try kdz updater
(I m afraid of using it as i bricked my phone once with it)
if u dare try http://forum.xda-developers.com/showthread.php?t=1060121
Related
I upgraded firmware V20D (official from LGVN) for my phone by LGMDP. In NV Backup/Restore, I chose Erase EFS All. There was no problem during the procedure but GSM, Bluetooth and GPS don't work, so I thing there have been some problems with the baseband. I checked in the Hidden Menu, the baseband version is AMSS6150. Can anyone help me???????
6.00 said:
I upgraded firmware V20D (official from LGVN) for my phone by LGMDP. In NV Backup/Restore, I chose Erase EFS All. There was no problem during the procedure but GSM, Bluetooth and GPS don't work, so I thing there have been some problems with the baseband. I checked in the Hidden Menu, the baseband version is AMSS6150. Can anyone help me???????
Click to expand...
Click to collapse
It look like that procedure wasnt complete. Try use KDZ to flash 2
3.3
send from Andy's PHOENIX.
mastershefis said:
It look like that procedure wasnt complete. Try use KDZ to flash 2
3.3
send from Andy's PHOENIX.
Click to expand...
Click to collapse
Trying now... It still doesn't work
Which ROM you are on????
He says original..
But is the AMS the baseband?
However, indeed you s should try KDZ.. Or go to service center with error ID_T_10
Greets
___
mDroidd
Sent from THE LG-P500
6.00 said:
Trying now... It still don't work
Click to expand...
Click to collapse
I dont think so that have to be functional..did you flashed it through kdz?
send from Andy's PHOENIX.
flash through KDZ if no other method works.
I tried to flash through KDZ in both Emergency and CS_Emergency mode. It still doesn't work, but the SIM Toolkit still works. Isn't that strange. Anyway, I decided to go to LG Service. Thanks for your helps.
6.00 said:
I tried to flash through KDZ in both Emergency and CS_Emergency mode. It still doesn't work, but the SIM Toolkit still works. Isn't that strange. Anyway, I decided to go to LG Service. Thanks for your helps.
Click to expand...
Click to collapse
Hey man I am having the same prblem. no gsm
I also tried everything, kdz. lgmdp, rolling back to stock 2.2, everything....... still no gsm, what did the service center guy told u? he said me that there is some problem with the board.... I cannot believe
is your fone okay now? plz reply me asap buddy.
They told me that there was a problem w/ I/O function so the baseband couldn't have been written properly. Anyway, the phone is fine now. You should just leave it for them and they'll know what to do.
6.00 said:
I upgraded firmware V20D (official from LGVN) for my phone by LGMDP. In NV Backup/Restore, I chose Erase EFS All. There was no problem during the procedure but GSM, Bluetooth and GPS don't work, so I thing there have been some problems with the baseband. I checked in the Hidden Menu, the baseband version is AMSS6150. Can anyone help me???????
Click to expand...
Click to collapse
you need to restore your nv file from lgmdp and you will get back your gsm.
Lgmdp restores nv file automatically but as you choosed erase efs all ,you need to manually restore nv file.
You can find your nv file in path (foldernamed_ your_imei\foldernamed_portnumber) at the place where lgmdp was stored during flashing (if you didnot delete that folders).
If you found your nv file restore it by following last part of this thread http://forum.xda-developers.com/showthread.php?t=1324105
or if you lost nv file then only way is to create nv with illegal imei by following http://forum.xda-developers.com/showthread.php?t=534704
and restore it in same way as in last part of http://forum.xda-developers.com/showthread.php?t=1324105
Did you try the v20 g? Try upgrading to it using lgdmp..it works fime for me
If you can't find the file anywhere pm me i will upload it
Sent from my LG-P500 using xda premium
Hi when I dial *#06# there is no imei number and in about phone it says unknown and out of service, i can see the baseband etc still but what can cause this?
is there any fix
refazta90 said:
Instructions:
1. Download and install the program "HexWorkshop Hex Editor v6.7" on PC (Googling).
2. Download the app "Galaxy Toolbox" of Google Play Store.
- Install the application on Android and open, accept, and select "Back up", and exit.
- See his backup file in / sdcard/SGYunlock/bml15.img.SAVE
- Move the file to your PC (Make a backup of his again, this is just in case)
- Open the hex editor program that was already installed on the PC.
- Open file backup his
- Make sure the filter character remains on the "Legacy ASCII" (on my picture circled in red)
- Write: 0x80000 in the blank box (Go to) (i circled in red in the picture the top)
- Click ENTER
- Press the IMEI number which is 15 Digits. (In the picture, look at the red arrow)
- SAVE, then close the program.
- Move the file "bml15.img.SAVE" to /sdcard/SGYunlock/HERE.
- Open the "Galaxy Toolbox" it, agree, and RESTORE, and exit.
- Reboot, and enjoy.. :good:
Click to expand...
Click to collapse
Search please
Sent from my GT-S5830i using xda app-developers app
@ luteriace
You won´t ask him about Firmware etc. and gave him this solution???
Ridiculous.....
@PhaseCoder
Tell me more, please.
Firmware?
Custom Rom?
Kernel?
haselchen said:
@ luteriace
You won´t ask him about Firmware etc. and gave him this solution???
Ridiculous.....
@PhaseCoder
Tell me more, please.
Firmware?
Custom Rom?
Kernel?
Click to expand...
Click to collapse
I think you are the one being ridiculous. What luteriace posted was the solution to restore PhaseCoder phone's IMEI and make his phone worked again. Dont blame if you dont know about it.
Advice
haselchen said:
@ luteriace
You won´t ask him about Firmware etc. and gave him this solution???
Ridiculous.....
@PhaseCoder
Tell me more, please.
Firmware?
Custom Rom?
Kernel?
Click to expand...
Click to collapse
Well, you might want to provide your recent history with the device e.g. have you recently flashed a new firmware etc?
only time I lost my IMEI number was after 'upgrading' to XXLK3 from XXLK2.
I downloaded the split F/W from these forums for XXLK2 and XXLK3 (I need the BTU CSC thats in XXLK3) I make bastard flash in ODIN Odin3_V3.07 using the pit file and re-partitioning (PLEASE DO NOT RE-PARTITION UNLESS YOU HAVE THE FILE: cooperve_0623.pit)
I used the PDA from XXLK2 the MODEM from XXLK3 and the CSC from XXLK3 every thing works well thith latest Rafeal kernel (E3 Version) so it fits me OK. I am looking for CWM on latest Rafeal Kernel to be compatiable with RFS so I can use my custom cooked Rom seeing as I cant get EXT4 to work...
Hope this helps?
haselchen said:
@ luteriace
You won´t ask him about Firmware etc. and gave him this solution???
Ridiculous.....
@PhaseCoder
Tell me more, please.
Firmware?
Custom Rom?
Kernel?
Click to expand...
Click to collapse
I managed to restore it witht he instructions from the first poster thanks.
no imei
luteriace said:
Search please
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
hey thanks it might help me too , but how to download galaxy toolbox from play when my network is not working?
manthanjb said:
hey thanks it might help me too , but how to download galaxy toolbox from play when my network is not working?
Click to expand...
Click to collapse
Geezz, download it using pc/laptop. Google it. Transfer it to your sdcard using sd card reader/adapter. Install it.
s5830i blank IMEI
This link worked for me but with one change.
http://forum.xda-developers.com/showthread.php?p=33563594#post33563594
When i did *#06# there was no IMEI. I can not make calls or SMS. Everything else including wi-fi, bluetooth worked fine.
Upon rooting my s5830i and using Android Mate or ES File Explorer, the /efs folder was empty. I did not see any files in it what so ever. Even selected Show hidden Files option in the file explorer settings. Still /efs folder was empty. I could not add files to the /efs folder or not even delete it so that it gets recreated upon boot as suggested in some other posts. All the posts related to hex editing of nv_data.bin were of no use. I felt miserable for not having a backup of the /efs folder.
However, Galaxy Toolbox (available on Google Play Store) was able to Backup EFS Partition. It created
/sdcard/GalaxyToolbox/EFSpart.img.SAVE and /sdcard/GalaxyToolbox/EFSpart.img.TMP. So that was strange. However I did not know what to do with this backup until I saw the link mentioned above.
I followed exactly the same steps in that post by replacing the following
1. / sdcard/SGYunlock/bml15.img.SAVE in my case was /sdcard/GalaxyToolbox/EFSpart.img.SAVE
After applying those steps and a reboot, *#06# showed up my correct IMEI.
Phone Details:
Samsung Galaxy Ace GT-S5830i
PDA: S5830IXXLD3
CSC: S5830IODDLD2
MODEM: S5830IDDLD1
PCode : GT-S5830OKIINS
Model Number: GT-S5830i
Android Version 2.3.6
Baseband Version S5830iDDLD1
Kernel Version 2.6.35.7 [email protected]#1
Build Number GINGERBREAD.XXLD3
More trouble with IMEI on s5830i...
Hi everyone. I have a similar, yet apparently a tad bit different problem with IMEI on my phone.
As with everyone else, typing *#06# shows an empty IMEI, and when I open Settings --> About Phone --> Status, it says "unknown" for IMEI, and "01" for IMEI SV.
However, I am able to make calls, send SMS, connect to mobile internet, etc. Also, when I run the Galaxy Toolbox and check phone details there, the Toolbox sees my IMEI normally. And if I backup the EFI partition and open it in Hex editor, my IMEI is there, as it always was.
For now, the only solution to getting back my phone to see it's own IMEI is to flash it back to stock ROM via Odin, and not to touch anything. It seems that whenever I try to install a custom kernel (i.e. one of the kernels compiled by the fine people here at XDA Developers), my IMEI disappears, and nothing short of an Odin flash will return it.
I've tried the method mentioned in this thread, but to no avail.
Am I doing something wrong? If so, what?
Wintershade said:
Hi everyone. I have a similar, yet apparently a tad bit different problem with IMEI on my phone.
As with everyone else, typing *#06# shows an empty IMEI, and when I open Settings --> About Phone --> Status, it says "unknown" for IMEI, and "01" for IMEI SV.
However, I am able to make calls, send SMS, connect to mobile internet, etc. Also, when I run the Galaxy Toolbox and check phone details there, the Toolbox sees my IMEI normally. And if I backup the EFI partition and open it in Hex editor, my IMEI is there, as it always was.
For now, the only solution to getting back my phone to see it's own IMEI is to flash it back to stock ROM via Odin, and not to touch anything. It seems that whenever I try to install a custom kernel (i.e. one of the kernels compiled by the fine people here at XDA Developers), my IMEI disappears, and nothing short of an Odin flash will return it.
I've tried the method mentioned in this thread, but to no avail.
Am I doing something wrong? If so, what?
Click to expand...
Click to collapse
Same for me, no imei, but can do everything.
Sent from my GT-S5830i using xda app-developers app
this worked for me...
Hey guys, just a quick update. I've managed to get my IMEI back by flashing to an older stock firmware version with Odin.
Now I can flash my device with a different kernel or ROM, and the IMEI is still there.
Just thought I'd share that info with you... hope it helps someone. Cheerio~
I'm using S3 shv-e210L. After i up rom named Donkey V8, i realise that the last number of my imei has been change from 4 to 1. Need help, pls!
MightySky said:
I'm using S3 shv-e210L. After i up rom named Donkey V8, i realise that the last number of my imei has been change from 4 to 1. Need help, pls!
Click to expand...
Click to collapse
Just Edit Your IMEI Using Hex Editor
imei solved
after doing what the 2nd reply said ... if u still cant see imei after reboot , flash original firmware and try should have your imei when u dial #06....
you can always download the bm15 file if yours is corrupt (like mine was) .
thats it i guess , imei restored
:highfive:
Can't create backup
S H A D Y said:
Just Edit Your IMEI Using Hex Editor
Click to expand...
Click to collapse
Thanks for reply. But i can't create a backup because the "galaxy toolbox" said that my device isn't supported. So any resolution?
MightySky said:
Thanks for reply. But i can't create a backup because the "galaxy toolbox" said that my device isn't supported. So any resolution?
Click to expand...
Click to collapse
Download This Google Toolbox From Play store
Links :- https://play.google.com/store/apps/details?id=com.doky.sgtoolbox&hl=en
No mmi code!!
Now I'm faced with the problem that when I try and send a text it fails and when I dial my mmi which is *#10# it continuously say 'connection problem or invalid mmi code'
Any ideas?
It was working fine until one time I lost 3G connectivity and couldn't call or text (on cm7.2 RC4)
I flashed stock through Odin (xxlk3) but the problem is still there. Please help soon as possible as this is a big problem for me
Stock ROM without IMEI
Hmm,
the HexEditor method doesn't work for me, because it is not showing any IMEI inside.
Galaxy Toolbox also doesn't show my IMEI.
I flashed back to Stock ROM (taken the open Australia stock rom from the UNBRICK tutorial).
After successfully flashing back (did factory reset and wipe cache before flashing back), IMEI is still not shown.
What am I doing wrong?
I had AOSP 2.3.6 Firmware installed before.
Is that any chance to get my IMEI back again?
Munchkin86 said:
the HexEditor method doesn't work for me, because it is not showing any IMEI inside.
Galaxy Toolbox also doesn't show my IMEI.
Click to expand...
Click to collapse
Have you tried typing the IMEI into the EFI file through HexEditor? Check out the scrots in this thread to see where the IMEI should be, and type it in there.
Also, backup everything first. Including the "faulty" EFI file you dumped from your phone.
After having S3 for some months, I decided to update it to 4.3.
So I searched online and saw some tutorials how to root and install costum ROMs.
I read few tutorials to be sure how to do that and after all went good and the ROM installed, One problem has rised: NO SIGNAL!
so I wiped all and installed a ROM STOCK.
After that the signal came back "half way". It's showing signal bars but I can't call to anyone, even after calling to my provider...
I just don't know what to do. Please help
VentAcruZ said:
After having S3 for some months, I decided to update it to 4.3.
So I searched online and saw some tutorials how to root and install costum ROMs.
I read few tutorials to be sure how to do that and after all went good and the ROM installed, One problem has rised: NO SIGNAL!
so I wiped all and installed a ROM STOCK.
After that the signal came back "half way". It's showing signal bars but I can't call to anyone, even after calling to my provider...
I just don't know what to do. Please help
Click to expand...
Click to collapse
well these tutorial you've read were either very bad or you haven't read them correctly, because probably you missed the important step of the efs backup. see therefor the stickies thread or the thousands of similiar questions here in the q&a.
Darkened_Sky said:
well these tutorial you've read were either very bad or you haven't read them correctly, because probably you missed the important step of the efs backup. see therefor the stickies thread or the thousands of similiar questions here in the q&a.
Click to expand...
Click to collapse
Ok... so if I don't have a efs backup so I am screwed I got it.
But I think I found somothing. it's called efs.tar that was on my phone. (attched)
What can I do with this file?
Thank you
VentAcruZ said:
Ok... so if I don't have a efs backup so I am screwed I got it.
But I think I found somothing. it's called efs.tar that was on my phone. (attched)
What can I do with this file?
Thank you
Click to expand...
Click to collapse
That is your backup flash with odin
( When you flashed a custom rom it probably backed up your efs some roms backup by default)
I would just backup your efs you have at the moment just in case you have problems flashing. You will then be able to return to how your efs is now even though it is not fully working..
Or try this app >> https://play.google.com/store/apps/details?id=net.hellcat.droiddev.ktool <<
The phone has to bee rotted to use ktool?
I also understand from the link you did about the EFS that there are two types of base bands and if I have an efs backup that I did on V1 baseband so I can't restore it on a v2 baseband, so my conclusion is to get back to 4.1.2... correct me if I am wrong
VentAcruZ said:
The phone has to bee rotted to use ktool?
I also understand from the link you did about the EFS that there are two types of base bands and if I have an efs backup that I did on V1 baseband so I can't restore it on a v2 baseband, so my conclusion is to get back to 4.1.2... correct me if I am wrong
Click to expand...
Click to collapse
good that you found efs backup
yes you need root. or you use the recovery philz touch to restore your efs (then you don't need root, but a custom recovery).
well samsung roms based on 4.3 need efs v2, so you have to go back to 4.1.2 to restore your efs v1 backup.
if everything is working again, I would suggest you to use oding to upgrade to 4.3, because then everything should be updated correctly (but keep your efs backup, and make another one, just to be sure)
then you can try out again custom roms based on sammy 4.3
So what is the best option to restore it?
Because before I tried (while 4.3 stock rom was installed) the flash it with Odin but Odin always crashed when I was uploading it to Odin.
With kTool I tried before but when I am clicking on the button it says that it restored but he didn't asked for directory, when do I need to put it?
The same story with phliz, I also tried with this and he don't asks for directory, only asking whan the ending if the file-tar to bin...
VentAcruZ said:
So what is the best option to restore it?
Because before I tried (while 4.3 stock rom was installed) the flash it with Odin but Odin always crashed when I was uploading it to Odin.
With kTool I tried before but when I am clicking on the button it says that it restored but he didn't asked for directory, when do I need to put it?
The same story with phliz, I also tried with this and he don't asks for directory, only asking whan the ending if the file-tar to bin...
Click to expand...
Click to collapse
Just extract the efs.tar and copy its contents to /efs.
vinceducut said:
Just extract the efs.tar and copy its contents to /efs.
Click to expand...
Click to collapse
Where is this folder located? I can't find it
and does it for xTool and phliz recovery destinations for teaking the recovery from?
Edit:
I found the /efs. I dind't know that I need to use root explorer...
I exchanged the files with my back up and suddenly instead of 0049 IMEI I got 0000 IMEI.
I tired also to flash a modem and also didin't work...
VentAcruZ said:
Where is this folder located? I can't find it
and does it for xTool and phliz recovery destinations for teaking the recovery from?
Edit:
I found the /efs. I dind't know that I need to use root explorer...
I exchanged the files with my back up and suddenly instead of 0049 IMEI I got 0000 IMEI.
I tired also to flash a modem and also didin't work...
Click to expand...
Click to collapse
Hmm... try installing another EFSv2 modem, then do the /efs copying part again.
Suddenly after so restarts, the IMEI got back
But... The SN now is 0000000000
You'll need to correct the permissions of the files you've copied. Try searching for someone who already did this and duplicate what they did.
Sent from my GT-I9300 using Tapatalk
Ok,
I tried something new. I flashed a new modem, backed up a full backup and then installed a costum rom 4.3.
the IMEI GOT BACK! And even the SERIAL NUMBER!
But I think the serial number is not good because he has 16 or 17 (I don't remember) digits (numbers and letters).
But still i have signal bars but can't make or receive calls he says: "No registered on network"
For the finalle, I tried ARIZA patch but he Is stuck on 0%...
here I stopped, I really don't know what to do.
Don't use the Ariza patch once you've got your IMEI and SN back. Maybe try flashing a new stock version of Android with a EFSv2 baseband so as to not go through the copying fiasco.
Sent from my GT-I9300 using XDA Free mobile app
VentAcruZ said:
Ok,
I tried something new. I flashed a new modem, backed up a full backup and then installed a costum rom 4.3.
the IMEI GOT BACK! And even the SERIAL NUMBER!
But I think the serial number is not good because he has 16 or 17 (I don't remember) digits (numbers and letters).
But still i have signal bars but can't make or receive calls he says: "No registered on network"
For the finalle, I tried ARIZA patch but he Is stuck on 0%...
here I stopped, I really don't know what to do.
Click to expand...
Click to collapse
Try this >> http://forum.xda-developers.com/gal...ii-network-problem-update-sn-t1918601/page199 << look at post 1984
tallman43 said:
Try this >> http://forum.xda-developers.com/gal...ii-network-problem-update-sn-t1918601/page199 << look at post 1984
Click to expand...
Click to collapse
Thank you!!!!!!!!!!!!!!!!!!!!!
It worked!!!!!!!!!!!
:good::good::good::good:
VentAcruZ said:
Thank you!!!!!!!!!!!!!!!!!!!!!
It worked!!!!!!!!!!!
:good::good::good::good:
Click to expand...
Click to collapse
:highfive:
I have a Samsung SII SHW-M250S and got it converted to I9100 through flashing a stock I9100 ICS ROM with .pit for the I9100. It converted properly and is working great.
My problem is when I flashed a custom ROM, I lost my IMEI and the baseband is unknown. The thing is I don't have back-up of my /efs folder or any CWM back-up before my problem occurred. I've tried mostly everything and still looking for almost a week now. Tried EFS Pro, restore and back-up of EFS through SGSII_repair, kTool, etc, flashing a modem, returned to stock JB of SHW-M250s, among others. There is an error showing in recovery mode, "E:/Unable to mount '/efs'"
jephimax said:
I have a Samsung SII SHW-M250S and got it converted to I9100 through flashing a stock I9100 ICS ROM with .pit for the I9100. It converted properly and is working great.
My problem is when I flashed a custom ROM, I lost my IMEI and the baseband is unknown. The thing is I don't have back-up of my /efs folder or any CWM back-up before my problem occurred. I've tried mostly everything and still looking for almost a week now. Tried EFS Pro, restore and back-up of EFS through SGSII_repair, kTool, etc, flashing a modem, returned to stock JB of SHW-M250s, among others. There is an error showing in recovery mode, "E:/Unable to mount '/efs'"
Click to expand...
Click to collapse
Is the 'efs' folder ther in the root of ur current ROM?
Try reverting back to the stock ROM, by extracting the files from the stock rom u got from sammobile.
(u need to hav everythin mentioned in ODIN. ie PIT, phone, pda etc. This u get by extractin the stock rom using cygwin n splitfus)
once all files are in order, select them and also select 'repartition' option in odin and flash..
Ur phone wil reboot and hopefully u wil hav ur efs folder with imei back..
dudders007 said:
Is the 'efs' folder ther in the root of ur current ROM? if it does, then
try reverting back to the stock ROM.. Sometimes this helps..
Backup the efs ther and then come back to this ROM again..
Click to expand...
Click to collapse
Yes, it does. I did do that, problem is, the problem persists. Tried both copying /efs folder from both stock JB of SHW-M250S and I9100 but no progress. At least now I don't get the mount error on /efs.
Well, I hope there are other guides as I'm stumped at the moment. Using it though as a media device for now.
jephimax said:
Yes, it does. I did do that, problem is, the problem persists. Tried both copying /efs folder from both stock JB of SHW-M250S and I9100 but no progress. At least now I don't get the mount error on /efs.
Well, I hope there are other guides as I'm stumped at the moment. Using it though as a media device for now.
Click to expand...
Click to collapse
U copied efs folder from where??
The efs folder has phone IMEI and Baseband numbers.. Its unique for each phone... (copying from ROMs is pointless)
Hope u didn delete the folder from the phone while trying out stuff with it.
If that folder is by any mistake, deleted, ur phone wil loose its imei number forever
and u wil have no choice but to give it to Samsung Care. ( or try using samsung's SRS tool (u find tutorials on youtube for this))
If u didn delete the folder from ur phone, try flashing the stock rom with the correct PIT file with 'repartiton' ticked.
(Use PIT with caution.)
Choose PIT to ur phone from here (Stock 2gb PIT for i9100. I dunno for SHW-M250S though) n follow the steps.
(search the forum for ur model specific PIT files to use it wit its specific ROM. SHW-M250S ROM with its PIT only)
---<>---
Since u have converted ur phone to i9100, u should be able to use i9100 PIT with i9100 Stock ROM to flash.
( i hav provided i9100 PIT file link above. Use it with i9100 Stock ROM only )
If this works, awesome..
dudders007 said:
U copied efs folder from where??
The efs folder has phone IMEI and Baseband numbers.. Its unique for each phone... (copying from ROMs is pointless)
Hope u didn delete the folder from the phone while trying out stuff with it.
If that folder is by any mistake, deleted, ur phone wil loose its imei number forever
and u wil have no choice but to give it to Samsung Care. ( or try using samsung's SRS tool (u find tutorials on youtube for this))
If u didn delete the folder from ur phone, try flashing the stock rom with the correct PIT file with 'repartiton' ticked.
(Use PIT with caution.)
Choose PIT to ur phone from here (Stock 2gb PIT for i9100. I dunno for SHW-M250S though) n follow the steps.
(search the forum for ur model specific PIT files to use it wit its specific ROM. SHW-M250S ROM with its PIT only)
If this works, awesome..
Click to expand...
Click to collapse
The thing is, I did not delete the /efs folder but I think it is corrupted, copied it to my computer and copied a stock /efs from M250S, and tried with I9100 /efs folder too. I did reflash to stock with their corresponding .pit files but IMEI is still null/null.
I guess I'll just give up since it is too costly to have it for repairs here.
jephimax said:
The thing is, I did not delete the /efs folder but I think it is corrupted, copied it to my computer and copied a stock /efs from M250S, and tried with I9100 /efs folder too. I did reflash to stock with their corresponding .pit files but IMEI is still null/null.
I guess I'll just give up since it is too costly to have it for repairs here.
Click to expand...
Click to collapse
I had managed to repair a messed up IMEI through samsung's SRS tool.. Give it a shot..
U should be back in stock ICS for this. and use the SRS' test login itself. it sometimes work.
U can find tutorials on you-tube...
Hope it helps...
dudders007 said:
I had managed to repair a messed up IMEI through samsung's SRS tool.. Give it a shot..
U should be back in stock ICS for this. and use the SRS' test login itself. it sometimes work.
U can find tutorials on you-tube...
Hope it helps...
Click to expand...
Click to collapse
I think you need a UART cable or a box for that, and investing money is out of the question mate. Could you give me a link for the actual 'tool' you're referring to? Might be a different software.
Hoping at least I could get the 00000... IMEI just to use this phone.
jephimax said:
The thing is, I did not delete the /efs folder but I think it is corrupted, copied it to my computer and copied a stock /efs from M250S, and tried with I9100 /efs folder too. I did reflash to stock with their corresponding .pit files but IMEI is still null/null.
I guess I'll just give up since it is too costly to have it for repairs here.
Click to expand...
Click to collapse
The ROM files wont hold ur IMEI number.. So copying them wont help..
jephimax said:
I think you need a UART cable or a box for that, and investing money is out of the question mate. Could you give me a link for the actual 'tool' you're referring to? Might be a different software.
Hoping at least I could get the 00000... IMEI just to use this phone.
Click to expand...
Click to collapse
U just need the samsung original usb cable and a rooted ICS firmware in ur phone.
Search on google for "SRS Samsung Remote Unlock Client " and you should find one.
Or use my attached file (might be an older version)
Use its test login and follow tutorials from youtube.
Its used for messed up IMEI but it just might help..
SRS: Repair Imei 0049xx on I9100 Galaxy S2 Phone.…: http://youtu.be/xu_k7A9pevw
knuckles1978 said:
SRS: Repair Imei 0049xx on I9100 Galaxy S2 Phone.…: http://youtu.be/xu_k7A9pevw
Click to expand...
Click to collapse
Well, my IMEI is null/null so will that work?
dudders007 said:
The ROM files wont hold ur IMEI number.. So copying them wont help..
U just need the samsung original usb cable and a rooted ICS firmware in ur phone.
Search on google for "SRS Samsung Remote Unlock Client " and you should find one.
Or use my attached file (might be an older version)
Use its test login and follow tutorials from youtube.
Its used for messed up IMEI but it just might help..
Click to expand...
Click to collapse
Getting an error on Windows 8.1
I don't think that it matters if your imei is null, that program should be able to restore it.
Do you have an older PC to try it on?
I don't know about the i9100, I've not had mine long, but on the i9000 you could restore the imei simply by flashing a stock gingerbread firmware with Odin.. Maybe worth a try also.
knuckles1978 said:
I don't think that it matters if your imei is null, that program should be able to restore it.
Do you have an older PC to try it on?
I don't know about the i9100, I've not had mine long, but on the i9000 you could restore the imei simply by flashing a stock gingerbread firmware with Odin.. Maybe worth a try also.
Click to expand...
Click to collapse
Gonn try it on Win 7, I am hoping it works. If not, might be a hardware problem as I've read from some threads.
knuckles1978 said:
I don't think that it matters if your imei is null, that program should be able to restore it.
Do you have an older PC to try it on?
I don't know about the i9100, I've not had mine long, but on the i9000 you could restore the imei simply by flashing a stock gingerbread firmware with Odin.. Maybe worth a try also.
Click to expand...
Click to collapse
Yup.. Its to repair the IMEI.. So it should work no matter..
N ya, i heard many telling goin back to GB helped too.. Worth a try..
I wudn give up on sgs2.. Its does almost everythin the sgs5 does..
jephimax said:
Well, my IMEI is null/null so will that work?
Getting an error on Windows 8.1
Click to expand...
Click to collapse
Try running with compatibility mode. (right click on exe -> props -> compatibility -> change to earlier windows)
I have it running on my 8.1..
JB has a bug that dont allow this to work.. So be on ICS Stock + rooted to use this app.
(It might say 'not enuf credit', but keep trying. Suddenly it wil work)
I've tried multiple SRS download, but it always says internal files are corrupted, please reinstall program, well something like that.
knuckles1978 said:
I don't think that it matters if your imei is null, that program should be able to restore it.
Do you have an older PC to try it on?
I don't know about the i9100, I've not had mine long, but on the i9000 you could restore the imei simply by flashing a stock gingerbread firmware with Odin.. Maybe worth a try also.
Click to expand...
Click to collapse
dudders007 said:
Yup.. Its to repair the IMEI.. So it should work no matter..
N ya, i heard many telling goin back to GB helped too.. Worth a try..
I wudn give up on sgs2.. Its does almost everythin the sgs5 does..
Try running with compatibility mode. (right click on exe -> props -> compatibility -> change to earlier windows)
I have it running on my 8.1..
JB has a bug that dont allow this to work.. So be on ICS Stock + rooted to use this app.
(It might say 'not enuf credit', but keep trying. Suddenly it wil work)
Click to expand...
Click to collapse
Can't install it on both Win 7 and 8 with compatibility and admin. It says that internal files are corrupt, try to reinstall the program. I've done with with other SRS setup .exe but still the same error.
jephimax said:
Can't install it on both Win 7 and 8 with compatibility and admin. It says that internal files are corrupt, try to reinstall the program. I've done with with other SRS setup .exe but still the same error.
Click to expand...
Click to collapse
U used the file that i attached?? Did it download some files..
Maybe the file is corrupted.. Try downloading this and give it a try..
dudders007 said:
U used the file that i attached?? Did it download some files..
Maybe the file is corrupted.. Try downloading this and give it a try..
Click to expand...
Click to collapse
I gave it a try several times since it is always closing by itself when the process is starting at 'Starting ADB server' or something like that. Though I tried the four methods.
jephimax said:
I gave it a try several times since it is always closing by itself when the process is starting at 'Starting ADB server' or something like that. Though I tried the four methods.
Click to expand...
Click to collapse
hmm... Thats rotten luck!!
M having no probs whatsoever in installing or running it..
Try it on different machines.. Might just work somewhere..
In case it does, u have to be on Stock rooted ICS..
Else u cant restore.
dudders007 said:
hmm... Thats rotten luck!!
M having no probs whatsoever in installing or running it..
Try it on different machines.. Might just work somewhere..
In case it does, u have to be on Stock rooted ICS..
Else u cant restore.
Click to expand...
Click to collapse
Only tried it on Win 8 with enabled compatability until Win XP SP3. Yeah, used stock ICS on SHW-M250S and rooted it, tried several times until all the methods ran completely, no change after reboot.
Then I converted it to stock ICS I9100 and rooted it also. Now the SRS won't even complete a method, just after starting, it auto-closes. Will try it on Win 7 when I get the chance.
jephimax said:
Only tried it on Win 8 with enabled compatability until Win XP SP3. Yeah, used stock ICS on SHW-M250S and rooted it, tried several times until all the methods ran completely, no change after reboot.
Then I converted it to stock ICS I9100 and rooted it also. Now the SRS won't even complete a method, just after starting, it auto-closes. Will try it on Win 7 when I get the chance.
Click to expand...
Click to collapse
Did u do it as per the tutorial???
Sure.. Did u enter ur SN number and IMEI in the Advanced option?? This has to be done..
Select the right phone from the option.
i9100 is Stock ICS of i9100 or SHW-M250S if it is its stock ICS ..
It should set it right...
All the best!
Gus, I really need help.
I was trying 6.0.1. update from 6.0. I made a backup of 6.0 before trying 6.0.1. BUT after flashing 6.0.1 there was no signal and also no network avalible com.phone keep FC. So I've flashed stock firmware for my device. And after that I'm keep getting to bootloop but if I flash custom kernel phone reboot but witnout signal and also there is unknown baseband and no IMEI. I have my S/N and IMEI on piece od paper. I've tried many things on XDA but nothing worked, I also tried to flash ROM with xposed to change IMEI but still no signal........ Im desperate.... Can someone help me please?
How did you upgrade? Do you have a nandroid backup?
AdisCZ said:
Gus, I really need help.
I was trying 6.0.1. update from 6.0. I made a backup of 6.0 before trying 6.0.1. BUT after flashing 6.0.1 there was no signal and also no network avalible com.phone keep FC. So I've flashed stock firmware for my device. And after that I'm keep getting to bootloop but if I flash custom kernel phone reboot but witnout signal and also there is unknown baseband and no IMEI. I have my S/N and IMEI on piece od paper. I've tried many things on XDA but nothing worked, I also tried to flash ROM with xposed to change IMEI but still no signal........ Im desperate.... Can someone help me please?
Click to expand...
Click to collapse
Ull need to flash stock with odin or smart switch thats the only way to recover imei or try restoring just the efs partition from the backup u made.
I've tried everything also flashing official firmware and so on, but nothing.... Still no base or IMEI... I don't have EFS backup - I know I'm retard....
AdisCZ said:
I've tried everything also flashing official firmware and so on, but nothing.... Still no base or IMEI... I don't have EFS backup - I know I'm retard....
Click to expand...
Click to collapse
Same here (Think we done the same thing with the Marshmallow 6.0.1 leak) I backed up, but the new version of TWRP I have has EFS as a separate option, I never even noticed and never backed it up.
However I Flash with smartswitch, and after reflashing the bootloader with odin and a Root Kernel, I can boot into the device and using root explorer, I CAN see my EFS folder. I deleted the .nv_data.bin files and changed the .nv_data.bak to .nv_data.bin (was an older date) and I now have the network options back but a generic IMEI and can't register on a network.
I feel SO close to getting it up and running, but if smartswitch can't help, not fully anyway, I'm not 100% I can be rescued either.
killyouridols said:
Same here (Think we done the same thing with the Marshmallow 6.0.1 leak) I backed up, but the new version of TWRP I have has EFS as a separate option, I never even noticed and never backed it up.
However I Flash with smartswitch, and after reflashing the bootloader with odin and a Root Kernel, I can boot into the device and using root explorer, I CAN see my EFS folder. I deleted the .nv_data.bin files and changed the .nv_data.bak to .nv_data.bin (was an older date) and I now have the network options back but a generic IMEI and can't register on a network.
I feel SO close to getting it up and running, but if smartswitch can't help, not fully anyway, I'm not 100% I can be rescued either.
Click to expand...
Click to collapse
I've called to my local service center and they said that they will reflash firmware fo 450 CZK (about 17 euros) and It will be done in 1 hour 30 minutes. So I will se what they can do with it. I've tried everything... and right now I don't know what else I can do. But If you figurate out how to fix it let me know Thanks!
Ive also heard that if you flashing each partion one at a time with odin that has fixed it for some
xstokerx said:
Ive also heard that if you flashing each partion one at a time with odin that has fixed it for some
Click to expand...
Click to collapse
What do you mean? Each part of Firmware? Is there any quide how to do that?
http://www.droidviews.com/extract-system-img-files-or-system-dump-of-android-devices-on-windows/
This might help i think u can just rename the tar to a zip or rar and extract the img files but i might be rong i havent done it on samsung phones only on my nexus 5
So my progress is that phone can now see networks, but still have srong SN and IMEI and also can't connect to the network...
AdisCZ said:
So my progress is that phone can now see networks, but still have srong SN and IMEI and also can't connect to the network...
Click to expand...
Click to collapse
That's as far as I got as well. At least we got to the same place
https://www.youtube.com/watch?v=Pai4BH3AWq8
For older Samsungs but might be worth a shot as it's already broken
same here
jockep said:
https://www.youtube.com/watch?v=Pai4BH3AWq8
For older Samsungs but might be worth a shot as it's already broken
Click to expand...
Click to collapse
Can't use codes on dialer, don't know why......
BAD NEWS.... Service center told me that they need to change motherboard.... 340 euros.... ****ing beta!
AdisCZ said:
BAD NEWS.... Service center told me that they need to change motherboard.... 340 euros.... ****ing beta!
Click to expand...
Click to collapse
Really ? --'
darbishh57070 said:
Really ? --'
Click to expand...
Click to collapse
No it's a JOKE! Yeah really
AdisCZ said:
No it's a JOKE! Yeah really
Click to expand...
Click to collapse
I got 3 old smartswitch backup and i find a file with the imei and everything , do you think its possible to backup this files ?
You CAN recover your phone with smartswitch, there is an emergency recovery function with a IMEI and SN input option, some users who used the same threat (android 6.0.1) and has lost their efs partition reported that smartswitch worked.
I've done this procedure too for some weeks to recover my phone an everything is working fine.
possibly with root explorer