I did the "And then was root" guide on my newly bought SGS2
And now I get stuck at the yellow triangle.
The phone doesn´t boot.
tried to pull the battery out. and tha push it back. boot.
Still stuck at the Triangle.
what to do
edit: I received this phone 28th of june so maybe this kernel is not available for download yet?
Flash another rom with odin ???
If you get that far then you should be able to get into Download mode. Please try:
Code:
Power off
Hold down Home and VolumeDown buttons at the same time.
Whilst the above buttons are held, press and hold power.
Release all buttons when you get a message pop-up stating something about Download mode/Custom ROMs.
If this is the case, then the device can be resurrected.
What to do next:
If I were in your position, I would use Odin to reflash the whole installation back to stock using this guide:
http://forum.xda-developers.com/showthread.php?t=1075278
Download the files from here (also in the above URL)
http://www.multiupload.com/P2AHY9IJPW
it will put you back on stock everything.
I used the XXKF2 PHONEDA/CSC.
The flashing will take about ten mins., or there abouts.
After you have this back and you are relieved that it works, you can flash the Chainfire CF-Root for XXKF2 (also written as KF2) as a PDA file in Odin. This will give you a rooted stock kernel.
Forum is here:
http://forum.xda-developers.com/showthread.php?t=1103399
Exact file is here with root stock kernel:
http://forum.xda-developers.com/attachment.php?attachmentid=630777&d=1308560511
I hope that this helps. Please remember to read the parts about how to flash using Odin, as people seem to like ticking the wrong boxes, even when the guides are pretty specific about what one has to do.
Best of luck.
Regards.
P.S I have used XXKF2 above because it pretty recent, I have used it myself, and the battery life on KF2 is very good.
Isn´t this a kernel problem?
Agreed that it could be a kernel problem, but I don't know.
I was aiming for a complete restart from scratch solution.
Of course, he could just flash the right CF-Root for his installation, so long as he knows what kernel he had before, and that the last kernel he flashed was the correct version.
Thanks! I will try your to install ALLstock as you stated in your first post!
This is what I get when trying the stock tar.
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I changed the USB cable which seems to be the problem.
I am now up and running with root!
Just going to choose a great rom now
same problem
Hi brother,
i am facing the same problem..yellow triangle...stuck at startup .. i have samsung s2 i9001G
(If this is the case, then the device can be resurrected.
What to do next:
If I were in your position, I would use Odin to reflash the whole installation back to stock using this guide:
http://forum.xda-developers.com/show....php?t=1075278
Download the files from here (also in the above URL)
http://www.multiupload.com/P2AHY9IJPW
it will put you back on stock everything.
I used the XXKF2 PHONEDA/CSC.
)
tried this also but is says fail with odin...
plz sombody help me..
my galaxy is made in vietnam by samsung.
i am living in saudi arabia..
You guys do know that i9100 ROMS are not compatible with i9100G phones, right?
If you flashed a ROM for another device on your phone, you are probably looking at a trip to the service center or a jtag.
CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.zip - [Click for QR Code] (7.01 MB, 39053 views)
CF-Root-SGS2_XX_OXA_KI3-v4.1-CWM4
tried both with odin..reslut from is PASS..but when mobile restarts.it again stucks at startup with triangle & ! mark..plz plz plz plz do help me...its been three days i am trying..
---------- Post added at 05:29 PM ---------- Previous post was at 05:12 PM ----------
yp i think i made this mistake of rom...so kindly tell me what should i do...
m hell tired now..three days sitting on pc...
umar.munawar said:
CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.zip - [Click for QR Code] (7.01 MB, 39053 views)
CF-Root-SGS2_XX_OXA_KI3-v4.1-CWM4
tried both with odin..reslut from is PASS..but when mobile restarts.it again stucks at startup with triangle & ! mark..plz plz plz plz do help me...its been three days i am trying..
---------- Post added at 05:29 PM ---------- Previous post was at 05:12 PM ----------
yp i think i made this mistake of rom...so kindly tell me what should i do...
m hell tired now..three days sitting on pc...
Click to expand...
Click to collapse
DUDE STOP.
You said you have a GT-I9100G, right???
Though they are similar, the GT-I9100 and GT-I9100G are actually two different phones, with different hardware, and different components. The firmwares and kernels are NOT compatible.
If you flashed a kernel and/or ROM that is specifically for the GT-I9100 (and NOT for the GT-I9100G), then you have screwed the pooch on your phone, and will likely have to take it to a service center.
EDIT: You should look here: http://forum.lowyat.net/topic/2068824. It may contain help for you.
Thank alot for your help...i got that i was using all the stuff for i9001....but i got it running now...n got root also...
Kindly do tell me how can i install custom roms using recovery mode...a link would b helpfull.
I got 2.3.6 running on my machine...love you dudes...PEACE...
Sent from my GT-I9100G using XDA App
http://forum.xda-developers.com/showthread.php?t=1341288
I am unable to install this on my machine...it says unable to match signature...plz guide
Sent from my GT-I9100G using XDA App
umar.munawar said:
http://forum.xda-developers.com/showthread.php?t=1341288
I am unable to install this on my machine...it says unable to match signature...plz guide
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
Dude, you're trying to install a ROM for your GT-I9100G, quoting a thread specifically for it. You would be MUCH better off asking for help in THAT thread instead of this one.
Asking for help with your GT-I9100G in a thread that is more likely to be viewed by users of the GT-I9100 model isn't likely to get you much useful advice or guidance.
hey...how did you manage to fix your samsung GT-I9100G dude?
Im in the same problem right now...I tried using stuff which were meant for I9100 and not I9100G.
Please man...I'm really desperate. Want to fix the mobile.
Sway212 said:
hey...how did you manage to fix your samsung GT-I9100G dude?
Im in the same problem right now...I tried using stuff which were meant for I9100 and not I9100G.
Please man...I'm really desperate. Want to fix the mobile.
Click to expand...
Click to collapse
hey DUDE...dnworry dats not a big thing to tackle..follow this thread..
http://forum.xda-developers.com/showthread.php?t=1341288
for Q&A...follow the link in above thread..which is also here
http://forum.xda-developers.com/showthread.php?p=19443058ead.php?p=19443058
Hope it will work..if not do tell me..we will find a solution.
Sway212 said:
hey...how did you manage to fix your samsung GT-I9100G dude?
Im in the same problem right now...I tried using stuff which were meant for I9100 and not I9100G.
Please man...I'm really desperate. Want to fix the mobile.
Click to expand...
Click to collapse
If people took time in reading before rushing out you would not be in this problem....
Nyssa1104 said:
If people took time in reading before rushing out you would not be in this problem....
Click to expand...
Click to collapse
Same in traffic ;d
Sent from my GT-I9100 using xda premium
Related
hello xda members..i have searched everywhere but can't find any solution..i purchased galaxy S2 yesterday and i tried to flash new FW (ICS) through ODIN..but process failed and now i am stuck at blank screen with some stuipid icons(phone lost signal to com)..i have tried everything(removed battery and then pressed vol down +power+home key and then insterted battery and all thge thinhs i have found but the screen wont go away..i am not able to go into download mode either...please help otherwise i am F***d..
P.S
and guys ODIN is detecting my phone..
P.S
guys i am flashing with those stupid icons as there is no download mode and here what comes in ODIN
OSM> I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLP1_REV_02_CL1095381.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALP2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/030> Odin v.3 engine (ID:30)..
<ID:0/030> File analysis..
<ID:0/030> SetupConnection..
<ID:0/030> Initialzation..
<ID:0/030> Get PIT for mapping..
<ID:0/030> Firmware update start..
<ID:0/030> boot.bin
<ID:0/030>
<ID:0/030> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any ideas...???
vivekrules said:
hello xda members..i have searched everywhere but can't find any solution..i purchased galaxy S2 yesterday and i tried to flash new FW (ICS) through ODIN..but process failed and now i am stuck at blank screen with some stuipid icons(phone lost signal to com)..i have tried everything(removed battery and then pressed vol down +power+home key and then insterted battery and all thge thinhs i have found but the screen wont go away..i am not able to go into download mode either...please help otherwise i am F***d..
Click to expand...
Click to collapse
Start by reading here:http://forum.xda-developers.com/showthread.php?t=1442549
Hi bro, no panic please it will be okay !!
Do you have jig ? if you have use it and try to come in Download mode
Then flash the stock and you are done
That sounds like the phone is in forced download mode. Does Odin recognise the phone when you hook it up to PC ? Obviously ensure you have Kies/drivers installed, and make sure Kies or any process related to isn't running in task manager. If Odin does recognise it, go to Sammobile & get stock firmware/flash it thru Odin.
If this doesn't work, and you can't get into download mode proper, in your own words, you're f****d. You could try a jig, but more than likely won't work (still worth a try tho).
So it's either a JTAG repair by a non-Samsung repairer (probably cheapest) Vs repair by Samsung with you paying (probably more expensive).
vivekrules said:
hello xda members..i have searched everywhere but can't find any solution..i purchased galaxy S2 yesterday and i tried to flash new FW (ICS) through ODIN..but process failed and now i am stuck at blank screen with some stuipid icons(phone lost signal to com)..i have tried everything(removed battery and then pressed vol down +power+home key and then insterted battery and all thge thinhs i have found but the screen wont go away..i am not able to go into download mode either...please help otherwise i am F***d..
P.S
and guys ODIN is detecting my phone..
Click to expand...
Click to collapse
And here also:http://forum.xda-developers.com/showthread.php?t=1457458
guys thanks for your help..but i got my phone fixed through samsung service center..it cost me 500 bucks...anyways tell me i still wanna root my phone and wana install custom ROM but this time suggest me first what should i do in order to be safe..i mean can i make a back up of my stock firmware through odin coz i didnt found my FW ver on sammobile as well..so guys and suggestion
thanks
vivekrules said:
guys thanks for your help..but i got my phone fixed through samsung service center..it cost me 500 bucks...anyways tell me i still wanna root my phone and wana install custom ROM but this time suggest me first what should i do in order to be safe..i mean can i make a back up of my stock firmware through odin coz i didnt found my FW ver on sammobile as well..so guys and suggestion
thanks
Click to expand...
Click to collapse
Before flash the ROM, please provide the phone details . Like I9100 or I9100 T or AT&T and country ..
So that we will provide extract info
Sent from my GT-I9100 using XDA App
Bro. Stop using Odin to flash roms. Flash through clockworkmod recovery. Visit galaxys2root c o m. Follow the instructions. Its simple an easy.
Sent from my GT-I9100 using XDA App
sendhiloo7 said:
Before flash the ROM, please provide the phone details . Like I9100 or I9100 T or AT&T and country ..
So that we will provide extract info
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
buddy here it is:
android ver:2.3.6
BB ver: I9100GDDKI1
kernel ver:2.6.35.7
[email protected]#2
Build number:GINGERBREAD.XWKJ2
I hope it enough buddy
and thanks for helping me out
Its because you have an I9100G version. Wrong section of the forum. If you flash the international version again, you will end up with the same problem. I think there are only a couple of custom roms for the G version.
Sent from my GT-I9100 using XDA App
Bro, as said above. Please make sure you know what's you're doing before flashing. you flashed the wrong ROM. You could avoid wasting 500 bucks :-(
Good luck
Sent from my GT-P1000 using xda premium
I'd say don't worry.
Just go to Original Development and find a i9100G stock rom and flash it through odin.
Search for bricked in General section there's a tutorial somewhere to unbrick your phone.
Stay calm and it's fixable. Samsung phones are basically very difficult to [email protected]
vivekrules said:
guys thanks for your help..but i got my phone fixed through samsung service center..it cost me 500 bucks
Click to expand...
Click to collapse
That's either not true, or you're not as smart as we thought. Well wait, no one thought that . It's funny though. I bet you impatiently flashed some incompatible ROM, or you haven't followed the instructions exactly.
mattyh77 said:
Its because you have an I9100G version. Wrong section of the forum. If you flash the international version again, you will end up with the same problem. I think there are only a couple of custom roms for the G version.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
umm..ok sorry i didnt knw that..
TheSaw said:
That's either not true, or you're not as smart as we thought. Well wait, no one thought that . It's funny though. I bet you impatiently flashed some incompatible ROM, or you haven't followed the instructions exactly.
Click to expand...
Click to collapse
its not funny bud
actually u r right, in excitement i tried to install custom rom asap..but i didnt knew tht dere was different versions of Galaxy S2..may be i flashed a wrong ROM
..my Bad..anyways would u plz help me in rooting my phone..i have tried all doomlord, zergrush..but it got stuck on reeboting say sunable to copy or whatever in system/app ....
can u help
I think what Saw is getting at is this. What happened to your phone happened because you didn't do the research. And if someone here spoonfeeds you what you're asking, what if you balls it up ? Same result. Bricked phone. Unless someone is actually sitting there with you doing it for you, there's no point someone else telling you what to do.
What you need to do is read/learn until you both understand what it is you want to do with your phone, why you want to do it and most importantly, know how to do it. Do not do anything to your phone if you're not confident (like you aren't now) or are unsure or scared of bricking your phone.
You have a lot of reading/learning to do so if you really want to root your phone, install a custom rom or whatever, I suggest you get started with that & wait until you're able to do it without being told what/how by someone else.
vivekrules said:
its not funny bud
actually u r right, in excitement i tried to install custom rom asap..but i didnt knew tht dere was different versions of Galaxy S2..may be i flashed a wrong ROM
..my Bad..anyways would u plz help me in rooting my phone..i have tried all doomlord, zergrush..but it got stuck on reeboting say sunable to copy or whatever in system/app ....
can u help
Click to expand...
Click to collapse
I was attempting to flash a custom kernel to my gs2 via odin, when I get this error message in the output:
[1:26:50 AM] Alice tucker: <ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
And now whenever the phone boots it does this
*apparently i'm being ostracized because i'm a new member and can't post images. PM me for the pic*
help what do I am not good with computer
also if this is in the wrong section please tell me where I should put it.
http://forum.xda-developers.com/showthread.php?t=1286432
http://forum.xda-developers.com/showthread.php?t=1313659
Read it and follow the instructions.
Make sure you click the Thanks button for entropy and creepyncrawly
people should go thru a quick test before being allowed to register
Dont panic just follow those two links posted by BROKKANIC....just download the UCKH7 2.3.4 GB or UCKK6 2.3.6 GB .tar and flash them with ODIN...and thank entropy and creepyncrawly......
mr. mustache said:
help what do I am not good with computer
also if this is in the wrong section please tell me where I should put it.
Click to expand...
Click to collapse
Questions go in the Question and answer section. Also, if you're"not good with computers" , it's easy to get a little more familiar. There are faqs and stickies about how to properly use heimdall and Odin, those things are really all you need to properly understand from a computer standpoint. But always read as much as you can. I know how tempting it is to flash stuff, but you don't wanna brick your device, and we don't want you to either
Sent from my MB860 using Tapatalk 2
omgabunny said:
people should go thru a quick test before being allowed to register
Click to expand...
Click to collapse
Ahhhhhh. But srsly. Lol. And yeah flash those Odin. You can't brick this phone unless you're playing with bootloaders. Which means you're retarded. Oh yeah heed my warning. Don't play with bootloaders. Nobody can save you then.
Sent from my SGH-I777 using xda premium
If all else fails...
...send it to MobileTechVideo.com. I bricked my GS2 and for $50, they got it up and running again.
drjim said:
...send it to MobileTechVideo.com. I bricked my GS2 and for $50, they got it up and running again.
Click to expand...
Click to collapse
Don't give bad advice, his phone isn't bricked if he follows the posted above information he will be fine
Sent from my SGH-I777 using xda premium
Phalanx7621 said:
Questions go in the Question and answer section. Also, if you're"not good with computers" , it's easy to get a little more familiar. There are faqs and stickies about how to properly use heimdall and Odin, those things are really all you need to properly understand from a computer standpoint. But always read as much as you can. I know how tempting it is to flash stuff, but you don't wanna brick your device, and we don't want you to either
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Aah, thanks about the q&a section
Also the "help I am not good with computer" was sort of a joke, as I feel pretty dumb right about now.
drjim said:
...send it to MobileTechVideo.com. I bricked my GS2 and for $50, they got it up and running again.
Click to expand...
Click to collapse
Lazy
(⊙＿⊙)
mr. mustache said:
Aah, thanks about the q&a section
Also the "help I am not good with computer" was sort of a joke, as I feel pretty dumb right about now.
Click to expand...
Click to collapse
Oohh sorry lol I thought u were serious either way there is a lot of info here, sometimes it can feel overwhelming. I know it did when I started out doing this.
Sent from my Nexus 7 using Tapatalk 2
Hello everybody,
I just got a SGH-I777 from ebay, but when i try to call somebody it displays "Not registered on network.".
I tried:
1. my simcard in another phone and it worked, tried using another simcard it displayed the same thing again.
2. Galaxy S Unlock, but it displays "error, not saved" when i try to back Efs folder.
Also here are my phone details.
If anybody has a solution for my problem please help me !
3rdo said:
Hello everybody,
I just got a SGH-I777 from ebay, but when i try to call somebody it displays "Not registered on network.".
I tried:
1. my simcard in another phone and it worked, tried using another simcard it displayed the same thing again.
2. Galaxy S Unlock, but it displays "error, not saved" when i try to back Efs folder.
Also here are my phone details.
If anybody has a solution for my problem please help me !
Click to expand...
Click to collapse
Are you using a non att sim?
122ninjas said:
Are you using a non att sim?
Click to expand...
Click to collapse
Yes. When i bought it seller told it was unlocked.
3rdo said:
Yes. When i bought it seller told it was unlocked.
Click to expand...
Click to collapse
Try to unlock again
122ninjas said:
Try to unlock again
Click to expand...
Click to collapse
But how it doesn't work with that app from the market
3rdo said:
But how it doesn't work with that app from the market
Click to expand...
Click to collapse
Are you rooted?
122ninjas said:
Are you rooted?
Click to expand...
Click to collapse
I don't know ? I didn't do anything to it but it is a used phone.
what is KK6 2.3.6 ???
2.3.6 is the android OS "gingerbread" and the uckk6 is the firmware version. I thought there were a couple apps in the market that could potentially unlock the phone??? Google search it and u might find more info.
Sent from my SGH-I747 using xda premium
Michael3214 said:
2.3.6 is the android OS "gingerbread" and the uckk6 is the firmware version. I thought there were a couple apps in the market that could potentially unlock the phone??? Google search it and u might find more info.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
None will work without root though.
Sent from Team Pirate! Using Tapatalk 2
Read the stickies to learn how to root the phone if it isn't already. Which it sounds like it isn't. Most people will un root before selling.
I tired to root my phone last night with "How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows) " but it stuck and my phone now doesn't work it displays Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Can you get into download mode and does Odin recognize the phone? Comm in Odin should be yellow and show a comm number.
Sent from my SGH-I727 using xda app-developers app
jd1639 said:
Can you get into download mode and does Odin recognize the phone? Comm in Odin should be yellow and show a comm number.
Click to expand...
Click to collapse
No it will show this message all the time, but Odin recognize the phone. It is yellow and shows COM4
please help me !!!
Find the stock Rom on sammobile.com for your device. Then flash it from PDA in Odin. Hopefully it'll bring you back to stock.
Sent from my SGH-I727 using xda app-developers app
jd1639 said:
Find the stock Rom on sammobile.com for your device. Then flash it from PDA in Odin. Hopefully it'll bring you back to stock.
Click to expand...
Click to collapse
i foiund my stock room but i don't know how to flash it ? please help me
and i forgot to write it before ODIN stops at modem.bin
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005>
<OSM> All threads completed. (succeed 0 / failed 1)
Please someone answer me, i have spent many hours today trying to understand what to do, but .... Please someone help me
also my phone does not have the at&t sign in it, it has a tracfone sign
3rdo said:
also my phone does not have the at&t sign in it, it has a tracfone sign
Click to expand...
Click to collapse
So basically you did things to a phone that isn't the i777? And you want help from i777 users?
OK. Good luck with that.
Sent from my Nexus 7 using Tapatalk 2
Pirateghost said:
So basically you did things to a phone that isn't the i777? And you want help from i777 users?
OK. Good luck with that.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
This was the name of my phone when i bought it: Samsung Galaxy S II SGH-S959G - Black (Unlocked) Smartphone (Straight Talk) i777
3rdo said:
This was the name of my phone when i bought it: Samsung Galaxy S II SGH-S959G - Black (Unlocked) Smartphone (Straight Talk) i777
Click to expand...
Click to collapse
Well it is only the s959g tracfone seems to have locked it down.
Sent from Team Pirate! Using Tapatalk 2
Hello guys, Sorry for posting a new thread, I understand it's unwelcome, but I've been looking around for a bit now and can't seem to find a solution to my problem.
So what's happening is that a while ago I rooted my device and installed Jellybam 7.2 something... Recently, I wanted to update Jelly Bam to the latest version and so I downloaded it using ROM manager and lauched the install from the recovery mod.
Problem is that now, my phone doesn't start anymore, it turn's on, the Samsung Galaxy stuff appears on the screen and stays there, nothing else is coming. Been like that for hours.
So if anyone can direct me to a solution to recover my phone in a working state, that would be awesome.
I tried to recover backups but didn't work
I tried to swipe all data and cache and to do a factory reset, nothing worked, I'm running out of ideas. Please someone.
Peace to you all
Morgan
Common solution is to flash the stock rom via odin on your pc, plenty on guides how to do in the stickies.
Also, questions should be posted in q&a forum, you can request a moderator move it for you.
morganflame said:
Hello guys, Sorry for posting a new thread, I understand it's unwelcome,
No not unwelcome at all all are welcome except when its a question that has been asked day after day after day and been answered .Or users dont want to bother themselves by reading the basic faqs and guides .
jje
Click to expand...
Click to collapse
If you can't get into recovery or download mode it can probably be Sudden death syndrome.
I think u have flashed a wrong version.
I have heard multiple people saying that they have stuck at Samsung logo after flashing a wrong file.
Are you sure that you have flashed a I9300 version ?
Sent from my GT-I9300 using xda premium
Thanks to all
Hey guys, thanks so much for your answers. I'm pretty sure I've downloaded the version for my I9300 as I got careful with that detail while rooting, flashing etc... Though, my version of Jelly BAM was the 7.2 something and the new one 9.something... maybe the upgrade was not possible from mine to the new one... Flashing the stock version seems to me to be the way to go. I'm gonna try that and let you know if it worked.
Sorry for misplacing the question, how do I request a moderator to move it ?
Peace y'all!
morganflame said:
Hey guys, thanks so much for your answers. I'm pretty sure I've downloaded the version for my I9300 as I got careful with that detail while rooting, flashing etc... Though, my version of <The rom we're not allowed to discuss> was the 7.2 something and the new one 9
Click to expand...
Click to collapse
FIFY
Stuck in the process.
Hey everybody, so I've started to work on flashing the stock rom on my s3 i9300 and I'm following the tutorial located here
androidrootz.com/2013/06/how-to-unroot-galaxy-s3-on-mac-osx.html
I have a problem now, the step 10 of the tutorial tells me to locate aboot in Heimdall's flash tab after locating the pit file from my phone that I saved in step 5.
10. Click on "Add" and select "ABOOT". Then click on "Browse" and locate "aboot.mbn". It is the folder that was renamed and untarred. Then click "Add" and do the process again for the all files in the folder (watch the video above for detailed instructions).
aboot.mbn --- ABOOT
boot.img --- BOOT
cache.img.ext4 --- CACHE
NON-HLOS.bin --- MODEM
recovery.img --- RECOVERY
rpm.mbn --- RPM
sbl2.mbn --- SLB2
sbl3.mbn --- SLB3
system.img.ext4 --- SYSTEM
tz.mbn --- TZ
Problem is that I can't see anything called ABOOT in the scroller it should be in. Even weirder, the tar file I got from the stock rom I downloaded doesn't contain that "aboot.mdn" the tutorial is talking about.
Anyone knows about that ?
Thanks a lot
morganflame said:
Hey everybody, so I've started to work on flashing the stock rom on my s3 i9300 and I'm following the tutorial located here
androidrootz.com/2013/06/how-to-unroot-galaxy-s3-on-mac-osx.html
I have a problem now, the step 10 of the tutorial tells me to locate aboot in Heimdall's flash tab after locating the pit file from my phone that I saved in step 5.
10. Click on "Add" and select "ABOOT". Then click on "Browse" and locate "aboot.mbn". It is the folder that was renamed and untarred. Then click "Add" and do the process again for the all files in the folder (watch the video above for detailed instructions).
aboot.mbn --- ABOOT
boot.img --- BOOT
cache.img.ext4 --- CACHE
NON-HLOS.bin --- MODEM
recovery.img --- RECOVERY
rpm.mbn --- RPM
sbl2.mbn --- SLB2
sbl3.mbn --- SLB3
system.img.ext4 --- SYSTEM
tz.mbn --- TZ
Problem is that I can't see anything called ABOOT in the scroller it should be in. Even weirder, the tar file I got from the stock rom I downloaded doesn't contain that "aboot.mdn" the tutorial is talking about.
Anyone knows about that ?
Thanks a lot
Click to expand...
Click to collapse
Not sure. You may need to add "Heimdall aboot?" to your thread title to get a more targeted response now as the scope of your original issue has changed. Now you need heimdall support.
Or maybe create a new thread with this new issue?
Ok
Ok, I will do that. Thanks
No answer
Hey guys,
I posted a new Thread with a better title here http://forum.xda-developers.com/showthread.php?t=2379894 but I got no answer whatsoever. When I make a google search about my problem, the first result is actually my own thread so I don't know if anybody got the same problem before. Can any of you tell me where I should look for help conscerning Heimdall and my particular problem.
where I should look for help conscerning Heimdall
Google >>> heimdall xda
or just search XDA .
jje
Hi. Maybe you can try to flash IT with oder in a win PC. Maybe one of your friends does own one. Since there is obviously no one Who can help you Witherspoon flashing with heimdall.
Gesendet von meinem GT-I9300 mit Tapatalk HD
---------- Post added at 01:16 PM ---------- Previous post was at 01:11 PM ----------
boldface123 said:
Hi. Maybe you can try to flash IT with Odin in a win PC. Maybe one of your friends does own one. Since there is obviously no one Who can help you in flashing with heimdall.
Gesendet von meinem GT-I9300 mit Tapatalk HD
Click to expand...
Click to collapse
Gesendet von meinem GT-I9300 mit Tapatalk HD
Q&A for Odin3 v3.10.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Odin3 v3.10.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
which is the best samsung odin verstion for galaxy 5 rooting ?
mirroalex said:
real deal? i can't find this anywhere else, it seems that 3.09 is the last then what is this?
Click to expand...
Click to collapse
i want to know which is the best samsung odin verstion for galaxy 5 rooting ?
i can see odin 3.10 is the latest but i was unable to confirm it ,, any help ?
---------- Post added at 01:13 AM ---------- Previous post was at 12:39 AM ----------
i want to know which is the best samsung odin verstion for galaxy 5 rooting ?
i can see odin 3.10 is the latest but i was unable to confirm it ,, any help ?
Update : i found odin 3.10.7 on Odindownload site, http://odindownload.com/
it worked for my new galaxy s6
djck said:
i want to know which is the best samsung odin verstion for galaxy 5 rooting ?
i can see odin 3.10 is the latest but i was unable to confirm it ,, any help ?
---------- Post added at 01:13 AM ---------- Previous post was at 12:39 AM ----------
i want to know which is the best samsung odin verstion for galaxy 5 rooting ?
i can see odin 3.10 is the latest but i was unable to confirm it ,, any help ?
Click to expand...
Click to collapse
I found and used odin 3.10 for a while and I can confirm that it is legit and fastest among.
thanks
mirroalex said:
I found and used odin 3.10 for a while and I can confirm that it is legit and fastest among.
Click to expand...
Click to collapse
Thanks ,
@anycallmongolia
What is the format of the file "Odin Downloader Release Notes.xlsx"?
I cannot open it using Microsoft Excel.
Thanks for the ad free download.
I am passing it along.
So . A little Help
Hi you guys, i"m quite scared about flashing. So tell me, I really have to use the .pit file and tick the repartition or not? I don't want to go back to KK. So much thank you so far.
3.10 - galaxy grand prime root
has anyone tried this on the root process of the grand prime?
will the manual reboot problem be solved?
thanks
Anyone know what "button" to choose in this version as it has no PDA button?
Galaxy S6
odin 3.10.6 download
Does odin 3.10.6 work any kind of android device?
ZadiasStark said:
Anyone know what "button" to choose in this version as it has no PDA button?
Galaxy S6
Click to expand...
Click to collapse
I have the same question?
conixel said:
I have the same question?
Click to expand...
Click to collapse
Just use the AP button. That will flash your device. I already went ahead updated my s4 to Android 5.01 only to find it has the wifi issue again.
~Conixel
PA
ZadiasStark said:
Anyone know what "button" to choose in this version as it has no PDA button?
Galaxy S6
Click to expand...
Click to collapse
---------- Post added at 02:52 PM ---------- Previous post was at 02:49 PM ----------
:d you need pit file for that, it will format hard disk, better dont use just use pa and update ur device otherwise ur device may brick.
feliperahn said:
hi you guys, i"m quite scared about flashing. So tell me, i really have to use the .pit file and tick the repartition or not? I don't want to go back to kk. So much thank you so far.
Click to expand...
Click to collapse
How to install PIT
Where do I can get PIT file? And how do I use it?
what's that mean for "RTN for Sprint" in version of Odin 3.10.7?
and how to use it and check it or not?
feliperahn said:
Hi you guys, i"m quite scared about flashing. So tell me, I really have to use the .pit file and tick the repartition or not? I don't want to go back to KK. So much thank you so far.
Click to expand...
Click to collapse
no usually you dont need to do that
first tell me what do you exactly want to do????
i have flashed my s5 couple of times for upgrading it ..... its quite easy .... fully exit your antivirus and kies ... enable usb debugging ..... go to download mode ..... connect your phone .... (if phone driver is installed on your PC) ID com turn to blue or yellow ..... check some option (depends on what you want to do exactly) .... choose your file(s) that want to flash them ..... and .................start.
some people advice to remove external card (but i didn't do that)
Odin3 v3.12.3 – Latest Version
djck said:
i want to know which is the best samsung odin verstion for galaxy 5 rooting ?
i can see odin 3.10 is the latest but i was unable to confirm it ,, any help ?
---------- Post added at 01:13 AM ---------- Previous post was at 12:39 AM ----------
i want to know which is the best samsung odin verstion for galaxy 5 rooting ?
i can see odin 3.10 is the latest but i was unable to confirm it ,, any help ?
Update : i found odin 3.10.7 on Odin3download site,
it worked for my new galaxy s6
Click to expand...
Click to collapse
Odin good tool. I found Odin3 v3.12.3 – Latest Version www.odin3download.com