Related
Hey guys, i hv rooted my phone n I want to flash a lag fix kernel on stock rom 2.2.2.. Which one sould I go for,
mik_os 1.1 / mik_os 1.2 / LOL lag fix kernel / any other?
Plz suggest the best one..
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
How is it better than the others??
sarfaraz1989 said:
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
Click to expand...
Click to collapse
can these kernels be installed with stock rom?
my phone says:
android version: 2.2
kernel version: 2.6.32.9
software version: v10c - oct-19-2010
i rooted the phone without hitches using z4root. i just want a better kernel as not brave enough for the custom ROMs.
thanks
ash
sarfaraz1989 said:
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
Click to expand...
Click to collapse
Thnx sarfaraz..
I flashed der_caveman fix signed-kernelv1.1.It made my gaming experience much better..I flashed mik_os too but sippolo's one was better..
where can i find der_caveman fix signed-kernelv1.1 optimised by sippolo?
guys if u are into gaming ...Courtesy a dev franscisco.franco...He have a super optimised rom best for gaming i just installed it its amazing !!!! And the best part it has all optimizations in it u dont have to worry abt a thing..Just follow the instructions and set it up...Its got everything from best kernel to awesome hacks and tweaks i m loving it
http://forum.xda-developers.com/showthread.php?t=1049518
7s10u said:
where can i find der_caveman fix signed-kernelv1.1 optimised by sippolo?
Click to expand...
Click to collapse
here
http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237
sarfaraz1989 said:
guys if u are into gaming ...Courtesy a dev franscisco.franco...He have a super optimised rom best for gaming i just installed it its amazing !!!! And the best part it has all optimizations in it u dont have to worry abt a thing..Just follow the instructions and set it up...Its got everything from best kernel to awesome hacks and tweaks i m loving it
http://forum.xda-developers.com/showthread.php?t=1049518
Click to expand...
Click to collapse
thanks,but do you know if i can find only the kernel to flash or i must flash the rom because im in lol 1.4.2 rom with dookmat kernel flashed over and works great
well u can always flash the kernel (caveman's) with the link i posted above
Does data of phone wipes after flashing with custom kernel?
I've all things done made a custom recovery even. With 1.2 version even.anything else I need to do?
Sent from my LG-P500 using XDA App
thanks!!!!!
is there any kernel which helps with battery life. I don't necessarily want a custom rom. any kernel which helps with battery life I would be interested. my rooted stock v.10c is running out of juice rather quickly and I am not yet using heavily. I am not too much into gaming or multimedia. 3g has to be on; as in my area 2g signal is worse than 3g.... go figure.
thanks
ash
i recommend u flash der_caveman's kernel and install and setup juice defender from market..I have done the same..Plus a tweaks like low brightness and powersave governor when screen is off(SetCPU) help
Hi all can i try flashing this kernel on my stock rom...This one seems nice..
[ROM] devoid.franco (franco.Kernel.v6: BFQ,BFS,smartass,lagfix,3D drivers +)
Hi Guys,
I consider myself noob and any type of help would be appreciated.
Can I mix Mik_os CM7 rom and Franco's 13.7 KERNEL? If its possible, What are the most simplest steps to do it?
same question. ^^
I tryed Gingerbread-2.3.4-rc2 @2011-05-22-21.00+GMT0 + Franco and didn't work. I think it will not work too.
Kheepur said:
Hi Guys,
I consider myself noob and any type of help would be appreciated.
Can I mix Mik_os CM7 rom and Franco's 13.7 KERNEL? If its possible, What are the most simplest steps to do it?
Click to expand...
Click to collapse
I have mixed various mik's CM7 with franco kernel and never had any problem, currently using beta CM7 6.5.1 with franco kernel 13.7.2
char101 said:
I have mixed various mik's CM7 with franco kernel and never had any problem, currently using beta CM7 6.5.1 with franco kernel 13.7.2
Click to expand...
Click to collapse
Thanks for the quick reply.
Few more questions.
1.Is it better or what?
2.Do I need to make partitions before installing the Kernel?
3.Do I need to wipe anything before installing the Kernel?
Greetings. As for me i think that mik's CM7 already has it's own Kernel optimized for CM7 so there is no need to flash another kernel like franco's which is i think most optimized for franco's void.devoid ROM. Also i did some benchmarking tests on AtuNtu. So on clean CM7 6.5.1 with native kernel , with CPU 600/245 i had 1326 result, after that i flashed franco's Kernel 13.7 , CPU 600/245 and i had 1136 result on benchmark. As for battery i dont know hadnt time to test both. But i really think that the best combination is just CM7 + libsqlite.so patch + franco's tweaks and none modifications for kernels.
Kheepur said:
Thanks for the quick reply.
Few more questions.
1.Is it better or what?
2.Do I need to make partitions before installing the Kernel?
3.Do I need to wipe anything before installing the Kernel?
Click to expand...
Click to collapse
i think the best way is to do it a clean install and use clockwork latest
wipe sd card,create partition 512 mb (automatically creates ext4)
transfer rom file and franco kernel using usb mount
wipe data,cache,system, and then select mik rom and install
reboot and complete the setup for rom,boot into recovery again and flash franco kernel do wipe ur cache
reboot
done!
asserp said:
...But i really think that the best combination is just CM7 + libsqlite.so patch + franco's tweaks and none modifications for kernels.
Click to expand...
Click to collapse
If so, you mind giving the URLs to Libsqulite patch and franco's tweaks. thanks.
Sure, you can get tweaks from here: http://forum.xda-developers.com/showthread.php?t=999064
and libsqllite from: http://forum.xda-developers.com/showthread.php?t=1000899
scroll down ull see Patched libsqlite.so for 2.3 by:mik_os
Kheepur said:
Thanks for the quick reply.
1.Is it better or what?
Click to expand...
Click to collapse
Only if you benchmark your phone, for common use I do not feel any noticeable difference. I only flash franco's kernel in mik's CM7 out of curiousity not of necessity.
2.Do I need to make partitions before installing the Kernel?
Click to expand...
Click to collapse
No.
3.Do I need to wipe anything before installing the Kernel?
Click to expand...
Click to collapse
No, just flash over. It will overwrite the old kernel.
As a short explanation:
no kernel have so sayed "special code" for froyo or gingerbread. We (the developers) have currently the 2.6.32 as base kernel because of missing drivers for a newer kernel version like 2.6.35.
the only difference between all .32er kernels are the patches - one kernel have more patches, another kernel have better patches, another have nothing of all - it works only as is.
thanks for explanation.
Thanks to all who responded.
Ok. New scenario. new problem.
I got mik_os v.6.3 + p500 tweak + libsqlite.os + DT apps2sd + CWM
The problem is I can't upgrade to mik_os v.6.5.
I already got the rom. I tried wiping everything using CWM, even the system. After installing and reboot, I got stuck in the first LG logo. Am I missing anything??
What is the correct way to upgrade and exact steps to take??
Thanks in. advance
Sent from my LG-P500 using XDA App
i think you need to format your sd card because of app2sd and leave it without partition , and try to flash the rom. If successful then make partitions again and flash app2sd.
hey can i flash franco Kernel 2.6.35.13 in stable 6.5.5 cm7
http://forum.xda-developers.com/showthread.php?t=1148196
abhi29 said:
hey can i flash franco Kernel 2.6.35.13 in stable 6.5.5 cm7
http://forum.xda-developers.com/showthread.php?t=1148196
Click to expand...
Click to collapse
nope. only 6.6 is configured to use 2.6.35 kernels. if you flash it, you will run into problems (for example, when i flashed it, camera showed only a white screen and accelerometer didnt work)
hmmmmmm.....Right info....
just want to give miks cm7 a try....
so which miks cm7 version is best considering performance and battery....??
and currenty i am on void forever is it worth changing??
and do i have to format my memory card and wipe all the date before flashing??
OR IS THERE ANY OTHER ROM WHICH IS BEST IN PERFORMANCE AND BATTERY?
gurpreet9080 said:
just want to give miks cm7 a try....
so which miks cm7 version is best considering performance and battery....??
and currenty i am on void forever is it worth changing??
and do i have to format my memory card and wipe all the date before flashing??
OR IS THERE ANY OTHER ROM WHICH IS BEST IN PERFORMANCE AND BATTERY?
Click to expand...
Click to collapse
It depends to u... U wanna normal or more...
Normal is - v6.5.7 + Franco.kernel 2.6.32.43 v19
More boost - v6.6.1 + Franco.kernel
2.6.35.14 v1-03082011
It is worth changing n u dont nid 2 wipe ur sdcard unless u wan sdext... For the Safe side wipe ur data.. And there is one but not out yet... Andy's ginger rom
Sent from my LG-P500 using XDA Premium App
dax4182 said:
It depends to u... U wanna normal or more...
Normal is - v6.5.7 + Franco.kernel 2.6.32.43 v19
More boost - v6.6.1 + Franco.kernel
2.6.35.14 v1-03082011
It is worth changing n u dont nid 2 wipe ur sdcard unless u wan sdext... For the Safe side wipe ur data.. And there is one but not out yet... Andy's ginger rom
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
and if flash the franco kernel is flash bfs or cfs ??
confusing @@
dax4182 said:
It depends to u... U wanna normal or more...
Normal is - v6.5.7 + Franco.kernel 2.6.32.43 v19
More boost - v6.6.1 + Franco.kernel
2.6.35.14 v1-03082011
It is worth changing n u dont nid 2 wipe ur sdcard unless u wan sdext... For the Safe side wipe ur data.. And there is one but not out yet... Andy's ginger rom
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
thanx for ur help....
btw is 6.6.1 stable and can u plz post the link for the above mentioned francos kernal which works with this rom?
XeactorZ said:
and if flash the franco kernel is flash bfs or cfs ??
confusing @@
Click to expand...
Click to collapse
from what I've read in the past few months, BFS is mostly used on Gingerbread ROMS like CM7.
gurpreet9080 said:
thanx for ur help....
btw is 6.6.1 stable and can u plz post the link for the above mentioned francos kernal which works with this rom?
Click to expand...
Click to collapse
6.6.1 is experimental and is not stable but you can try it.
Link for franco's kernel for gingerbread is here:
http://forum.xda-developers.com/showthread.php?t=1049518
you might want to stick with v6.5.7 with franco's v19 kernel. If you want something stable for now.
one more question plz,,,,
i want to flash 6.5.7,can i use gprs on 6.5.7??
i am from india
wats an android phone without data connectivity????
obviously you can....
gurpreet9080 said:
one more question plz,,,,
can i use gprs on miks rom??
i am from india
Click to expand...
Click to collapse
yes, you should be able to use gprs on miks rom both v6.6.1 and v6.5.7. See the channel logs for this rom on the 3rd post. As far as I know, data and gprs will not be available if you have the new baseband installed (v20 something) since the roms are for v10.
kyerie030 said:
yes, you should be able to use gprs on miks rom both v6.6.1 and v6.5.7. See the channel logs for this rom on the 3rd post. As far as I know, data and gprs will not be available if you have the new baseband installed (v20 something) since the roms are for v10.
Click to expand...
Click to collapse
how can i get old baseband,ie,v10??
is it built in 6.5.7 or do i have to do anything else?
and do i have to install any other kernal for performance and battery boost?
gurpreet9080 said:
how can i get old baseband,ie,v10??
is it built in 6.5.7 or do i have to do anything else?
and do i have to install any other kernal for performance and battery boost?
Click to expand...
Click to collapse
1. you can't get the old baseband back if you are already on v20.
2. it is not built in on any ROM, it is flashed via update on the PC
3. You can opt to do so... usually yields good results when flashing a modified kernel over the original one given by the ROM's creator (i.e. mik's CM7 uses franco's v18 in one of his builds which could be updated to v19 and the experimental build uses franco's gingerbread kernel.)
Quoted from Mik:
Q: I flashed rom and GSM don't works. What's to do?
Q: I have new baseband, how fix gsm? (you have new baseband if you upgraded your phone to official 2.3.3)
A: Flash this: gsm fix (support for new baseband, this is not baseband itself).
WARNING: Data don't works, wait for new fix.
Click to expand...
Click to collapse
gsm fix is here: http://www.multiupload.com/R9CEDO2HS9
are you sure you really have the new baseband? (pray that you don't) look into Settings > About phone, check the Baseband version.
kyerie030 said:
1. you can't get the old baseband back if you are already on v20.
2. it is not built in on any ROM, it is flashed via update on the PC
3. You can opt to do so... usually yields good results when flashing a modified kernel over the original one given by the ROM's creator (i.e. mik's CM7 uses franco's v18 in one of his builds which could be updated to v19 and the experimental build uses franco's gingerbread kernel.)
Quoted from Mik:
gsm fix is here: http://www.multiupload.com/R9CEDO2HS9
are you sure you really have the new baseband? (pray that you don't) look into Settings > About phone, check the Baseband version.
Click to expand...
Click to collapse
checked baseband version in about phone
it says "V07u-000-000-mar 23-2009"
so is it new one or old??
Thai is NOT a baseband version at all. Read my howto, been debated to death, no point in answerin such stuff over and over again.
Sent from my LG-P500 using XDA App
can't understand what exactly ur " how to" is all about
but thanx anyway
and btw i switched from 2.2.2 to void forever so can anyone tell me my baseband??
can i switch to mik's 6.5.7 with baseband??
Sorry, my bad...
try this:
dial this one you shouldn't need to call:
3845#*500#
it should show the hidden menu, look under version info. You should see your baseband there. dunno if this works on 2.3+ roms though, tried it on mik's cm7 can't get the menu to show.
gurpreet9080 said:
and btw i switched from 2.2.2 to void forever so can anyone tell me my baseband??
Click to expand...
Click to collapse
Hard to read is hard, huh. Your question is answered in the howto, even with pics showing you how to find out the baseband version. But then again, noone bothers with reading.
gurpreet9080 said:
can i switch to mik's 6.5.7 with baseband??
Click to expand...
Click to collapse
That sentence does not even make any sense.
gurpreet9080 said:
can't understand what exactly ur " how to" is all about
but thanx anyway
and btw i switched from 2.2.2 to void forever so can anyone tell me my baseband??
can i switch to mik's 6.5.7 with baseband??
Click to expand...
Click to collapse
You have old baseband and you can flash cm over it. You will be absolutely fine. Just go ahead.
Sent from my LG-P500 using Tapatalk
Ok, my bad again, didn't read that part. The code for the hidden menu only appears on stock roms.
@gurpreet you were using 2.2.2, that means you have the old baseband or v10... isn't that right dr.notor?
can i switch to mik's 6.5.7 with baseband??
Click to expand...
Click to collapse
yup it doesn't make sense... you can switch to mik's, you should not have the new baseband. You are already using ROMs that are using the v10 baseband, you don't need to worry about anything else.
Read the first few posts of the ROMs threads to understand what the roms are and what you need to do before flashing them.. again... READ... can't stress this enough since I myself am getting sluggish at it.
kyerie030 said:
@gurpreet you were using 2.2.2, that means you have the old baseband or v10... isn't that right dr.notor?
Click to expand...
Click to collapse
Who knows... These people flash random 5 ROMs a day, stock Froyo, then custom GB, then stock GB, CM7 and in the end they go complain about no data, blaming the ROM.
As said on the howto, the LGMDP utility will always tell you which baseband you have (v10?/v20?)
kyerie030 said:
from what I've read in the past few months, BFS is mostly used on Gingerbread ROMS like CM7.
6.6.1 is experimental and is not stable but you can try it.
Link for franco's kernel for gingerbread is here:
http://forum.xda-developers.com/showthread.php?t=1049518
you might want to stick with v6.5.7 with franco's v19 kernel. If you want something stable for now.
Click to expand...
Click to collapse
@ Gurpreet90 Actually both r stable btw... Mik jus put there experimental cuz he tinks that noobies think is stable, all go for the stable not the beta... Well, im using v6.6.1(+ Franco kernel 2.6.35.14) without a single problem... No blackscreen bug either... But the v6.5.7 + FKv19, i experience problem like im cant bring up freq like to 748mhz... So make ur decision wisely... The performance or the less fps... Btw, u dunt have any problem with ur baseband... Download cm7 n flash it...
Sent from my LG-P500 using XDA Premium App
kyerie030 said:
from what I've read in the past few months, BFS is mostly used on Gingerbread ROMS like CM7.
6.6.1 is experimental and is not stable but you can try it.
Link for franco's kernel for gingerbread is here:
http://forum.xda-developers.com/showthread.php?t=1049518
you might want to stick with v6.5.7 with franco's v19 kernel. If you want something stable for now.
Click to expand...
Click to collapse
but i saw dr.notor signature putting he using Mik CM7 6.5.7 + franco kernel v19 cfs
so which one need to flash it ??
confusing @@
kyerie030 said:
Sorry, my bad...
try this:
dial this one you shouldn't need to call:
3845#*500#
it should show the hidden menu, look under version info. You should see your baseband there. dunno if this works on 2.3+ roms though, tried it on mik's cm7 can't get the menu to show.
Click to expand...
Click to collapse
stock LG 2.2.2 user here
just type as you say, my baseband version is AMSS6038
so, is it means that i can flash Mik CM7 without flash the gsm fix since my version v10g(for my country) now
Is it possible to have a common kernal for CM 7.2 and LLW stock+rooted.
I think rage kernel will work. not sure.
Nope, there is no such kernel, which will work on both stock and CM7.2.
Rage Kernel only works with stock and stock-based ROMs.
It will be better if some one get one-that work on both.. As fresh ROMs come out all have to flash new kernel before installing ROM
b00tbu9 said:
It will be better if some one get one-that work on both.. As fresh ROMs come out all have to flash new kernel before installing ROM
Click to expand...
Click to collapse
Cannot be made, as stock kernel has own requirements and custom ROMs other requirements.
Sent from my Xperia Live using xda premium
Do I need a custom kernel for CM7.2 or a stock kernel will suffice?
anivesh93 said:
Do I need a custom kernel for CM7.2 or a stock kernel will suffice?
Click to expand...
Click to collapse
As mentioned above. No, won't work. Use either the FXP kernel that comes with the ROM or use Rage Kernel For FXP. Alternative is kamarush's kernel for MiniCMsandwich.
neocyke said:
As mentioned above. No, won't work. Use either the FXP kernel that comes with the ROM or use Rage Kernel For FXP. Alternative is kamarush's kernel for MiniCMsandwich.
Click to expand...
Click to collapse
I am confused, will Krsh Kernel work with CM7.2? I thought Krsh kernel is for stock ROMs only. If Krsh kernel works with CM7.2 then I will try it, because the FXP kernel inside CM7.2 drains my battery very fast.
hafizimtiaz said:
I am confused, will Krsh Kernel work with CM7.2? I thought Krsh kernel is for stock ROMs only. If Krsh kernel works with CM7.2 then I will try it, because the FXP kernel inside CM7.2 drains my battery very fast.
Click to expand...
Click to collapse
Only fxp and rage kernel(FXP version) will work. with FXP's CM 7.2. Got it?
All i want from YOU(developer) is just a litle time to spent on fixing this "smail" problem with franco's kernel ( http://forum.xda-developers.com/showthread.php?t=1148196 )...
Here's the thing..
It's a gr8 kernel but has a major problem with my CM 7.1 ROM ( http://forum.xda-developers.com/showthread.php?t=946354 )
Any kind of video(camera, youtube or any video format at all) shows WHITE SCREEN...Looking for a fix but none found so far...
*some info that might be usefull:
-The camera's screen is WHITE but your still able to take picture and review it after you taken it...
-Video options like Play,Stop etc. are avaible and work...
Rly nice kernel don't wanna switch it but unless it's fixed i see no other options...
I'll keep continue with my search for solution to this problem and Have a nice day
That kernel is not for miks 6.5.8(.32 kernel)
6.6.1 I believe is working or maybe not since its also a .35 kernel
Sent from my LG-P500 using XDA
So...
*Maybe it's not for miks .32, but the kernel works perfectly for me, so far so good (except for the WHITE video screen)...
***Extra thing that i found:***
" Franco's .32 kernels
http://******* ->CFS version for Multitasking
http://********->BFS version for Performance/Better Gaming
Franco's .35 Kernel
Download/Info->http://*******/5ljX5 "
[source and links from http://lgp500-optimusone.blogspot.com/p/custom-roms.html ]
So if miks is .32 i should get the same kernel since it's compatible (lol) = one of Franco's .32 kernels = The Multitasking or The Performance...
Which one should i get...
All i need is the same performance, the touchscreen inversion, touchscreen CPU -> 100% lagg when u touch the screen = as the Franco's newest kernel...
If everything fails switching my ROM is my secondary option... :/
Left4DeadMW said:
*Maybe it's not for miks .32, but the kernel works perfectly for me, so far so good (except for the WHITE video screen)...
***Extra thing that i found:***
" Franco's .32 kernels
http://******* ->CFS version for Multitasking
http://********->BFS version for Performance/Better Gaming
Franco's .35 Kernel
Download/Info->http://*******/5ljX5 "
[source and links from http://lgp500-optimusone.blogspot.com/p/custom-roms.html ]
So if miks is .32 i should get the same kernel since it's compatible (lol) = one of Franco's .32 kernels = The Multitasking or The Performance...
Which one should i get...
All i need is the same performance, the touchscreen inversion, touchscreen CPU -> 100% lagg when u touch the screen = as the Franco's newest kernel...
If everything fails switching my ROM is my secondary option... :/
Click to expand...
Click to collapse
Use Franco gbs by fserve(search), it is an improved version of it and has a gaming version and a non gaming version
Sent from my LG-P500 using XDA
:/
Downloaded this
http://www.mediafire.com/?9r5yktkamy21wiz Franco.Kernel 20a multitasking
and i just flashed it...
It's not the same...less performance but at least video and camera are not white...