Every time I try to flash a different modem, IE XXKG3, XXKG2, XXKG1, XXKF2, XXKF1; it tells me PHONE: Unknown in *#1234# XXKE4 and lesser seem to work just fine. I have had this issue on stock 2.3.3, and now with the latest lightningrom3.2(XXKG2) it is the same. Can anyone help me fix this, or offer insight into what the deal is?
Bump.
Sent from my GT-I9100 using XDA App
Bump looks as you are only one with the problem .
Wrong flash wrong whatever totally wipe phone and start again only suggestion.
Phones get confused with multiple flashes with bits left behind is my experience .
jje
I have wiped and re-flashed 5 times minimum. Some of those with PIT. I guess ill give it another shot, I don't mind setting everything up again(and again...).
I re-flashed another 5 times. Still not working, I will just go back to my working setup and live with it. Unless anyone else can help.
I re-flashed another 5 times.
As i posted multiple flashes f*** phone .
Connect in mass storage mode format phone through windows .
Recovery mode mounts and settings format data sytem sd card .
Recovery wipe dalvik cache wipe cache factory reset .
Blank phone via Odin install stock firmware not 2.3.4 .
jje
So you are saying, to mount in windows, format my usb storage, then perform a factory reset on the phone? Reflash the stock firmware.
Then I can flash the KG3?
Formatted the usb storage partition VIA windows, with CWM wiped data, wiped cache, wiped davlik, formatted everything else.
Re-flashing stock.
I am doing the format then I will wipe everything again. Then install LightningROM 4.1 Is this as you meant?
After all that still did not work.
I meant wipe and install a stock rom with a later modem than KE4 NOT A CUSTOM ROM .
Have you actually flashed a modem by itself .
Does your custom rom actually contain a modem .
jje
Ok, I will try that tonight, an XXKF2 rom. I have tried to flash modems by themselves, the way I get the modem to be XXKE4 while using lightning rom(XXKG3) is by flashing only a modem. Yes the LR4.1 Contains the KG3 modem.
So, I had KF2 recognized, and I saw service for about 5 seconds, then it went away didnt come back, so I am trying other ROMS. At least it was recognized. Thanks
Now I have it recognizing KG3, but not recognizing my sim, with KF2, it got my phone number and such, then disconnected never connecting again
So with the official higher than KE4 modems, they are now recognized, but no network. Is there anything more I can do?
Related
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Thx I will try it soon. But how come I can flash ics kp8 and lp2 roms
Are you using the new bootloader then?
That one Im not sure of but I have read on other threads that people have had to "repartition" their phones to be able to flash back from ICS.Not bieng on ICS I dont see why you cant as the Omega ROM was just themed.Im on the latest Omega and its 2.3.6. so 100% positive it wasnt ICS.Also Try stupid things like another com port.Happened to me once.The one I was using when I had an i9000 stopped letting me flash it via Odin when it reached the same stage every time I tried.Dont Know why.Just had to change ports.Try everything:
1.Full wipe and flash.....If that dont work then...
2.Flash F/W that works then change kernel and flash old bootloader(as mentioned above)never know,might work.
http://www.multiupload.com/LQQBRQVJUD
Flash it in PDA in Odin.
ALso you could try a program called "Fus Downloader"
http://fus.nanzen.se/
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
KevandLynds said:
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
Click to expand...
Click to collapse
True.Same thing happened to my mate.He has an i9000 and Odin stopped flashing his phone but only if he used a PIT file so I gave him my i9100 cable and it started flashing his phone again with PIT file selected.Weird how things work sometimes for no real reason.Anyway Nandroid backups are always a good call.could have saved some trouble the this case.Ive got a Nandroid backup on my phone and copied to DropBox thats months old but it would get me out of trouble if this sort of thing happened to me Even though its old as.Gotta have that saftey net.
zabihjan said:
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Click to expand...
Click to collapse
Try flashing a Gignerbread bootloader using Odin
happel92 said:
Try flashing a Gignerbread bootloader using Odin
Click to expand...
Click to collapse
I will try it soon thx
Sent from my GT-I9100 using Tapatalk
JJEgan said:
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
Tried dont work i can only flash ics roms
Sent from my GT-I9100 using Tapatalk
pulser_g2 said:
Are you using the new bootloader then?
Click to expand...
Click to collapse
Old bootloader as i can use my jig to clear counts
Sent from my GT-I9100 using Tapatalk
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Didnt work
Sent from my GT-I9100 using Tapatalk
Mate,thats a strange one alright.
Any luck yet.I was thinking that you might have to look for a package that has the older 4 file flash with pit.Its possible that maybe you need to repartition your device.Might be hard to find thought.
iv been having a few issues as of late with my s2 so decided id just backup my numbers and media and wipe and start again, but when i do a factory reset, it shows an error mounting the sdcard/.android_secure
and then it skips it, can anyone tell me how to fix this problem so i can start a fresh with a nice clean and empty galaxy
What system do you have? ics or ginbread...?
Question = wrong forum.
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
my apologies, i havent used the forum much as the phone has been fine for about 6 months, its now on checkroms v6 which i managed to flash onto it with a bit of fiddling, thinking that may solve some of my issues but it didnt. thats when i noticed this error when doing a few resets.
JJEgan, gonna follow your steps now buddy, thanks and fingers crossed
its a no go, it wont let me format or mount the sdcard
try factory reset from phone menu,
try another kernel to get another version of CWM, eg: Siyah
hiya zac, well i have the phone in download mode connected to odin, im using the link in your sig, and downloading the stock firmare and kernal, will it matter if i didnt wipe the sdcard before flashing these two items with odin? surely i can do it after?
upto you to try.....
cant guarantee since dont know what weird problem has got with your SD card which
dont allow you to wipe,
you can also try flashing another custom kernel first,
When you flash a stock firmware it already contains a Kernel, no need to flash seperately..
any chance to a quick link to a kernal to try and a guide!
its been a while since iv done this! haha
which rom are you currently on?? ICS or GB
checkrom v6 i do believe
GB CWM flash : http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14-CWM.zip
Checkrom is GB version,
but makesure, from settings/about phone
i will bud, and i flash that kernal, with odin?
no this is CWM flashable, put on SDcard, and flash from CWM,
top man, off to have a go now
if CWM flash fails, you can try from ODIN
ODIN flash :http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14.tar
select the file from PDA of Odin,
Pugme said:
its a no go, it wont let me format or mount the sdcard
Click to expand...
Click to collapse
Unless you have a external sdcard, this problem is self explanatory!
Hey guys!!!
New galaxy S2 owner. I have done some searching in these forums and the threads answered many of my questions. However, I still have some newbie questions that I found unanswered. Please excuse me if my questions have been answered before but I got tired of searching
Here is the deal:
Yesterday, I flashed a CF Root with Odin3. Then used CWM to flash a wanamlite firmware. The firmware was great but I didn't like that it still had TW. So I dl'ed another firmware to the internal SD card and flashed again using CWM. I then flashed a couple of other ROMS and I noticed that after the first wanamlite flash, the new ROMs were unstable with many error messages that some OS processes have stopped etc.
I got back home, flashed to stock with Odin3 and the phone got stuck at the second samsung logo. I followed some community steps (thanks XDA) like disabling all kies processes from TM, wiping data/cache, then boot in DL mode and flash the stock ROM using Odin3 which worked.
I then Flashed a CF Root again and used CWM to flash a Spike Pure ICS ROM v5 which was great but I get occasional error messages like 'gallery stopped' or some other error message when I try to set contact photos. It just lags, blackscreen then comes back with the 'Unfortunately, the process had stopped'.
My questions: is this because of the previously flashed firmware that this is happening or is it that those ICS ROMs have these issues commonly? Did anyone have this experience before? What do you advice before flashing to a new ROM going back to stock or going straight from the current? Doesn't Odin3 technically wipe everything back to stock?
WIPE WIPE WIPE.
Go into recovery. Data/factory reset.
Advanced, Wipe dalvic cache. Mounts and storage, format system. Its a standard procedure going from one OS to another OS. You can then either flash a firmware zip from recovery or an .tar file from Odin.
Then to be on the safe side factory reset once again.
Sent from my GT-I9100 using Tapatalk 2
Wich fw do you have?
Make a deep clean with odin an flash on the latest ics version (lp9 is a good one)..then flash (if you want) a custom rom..
My experience with custom roms: one of the best rom samsung based (ics 4.0.3) is the foxhound greyfox v2..if you want a pure ics rom flash the omega aokp rom (ics 4.0.4)..
Try then to change kernel..siyah is the best for both roms..
P.s. sorry for my bad english
Sent from my GT-I9100 using Tapatalk 2
After LP7 should be staple enough for daily use .However you are using custom roms and you should read carefully each roms thread before flashing .
You are probably suffering from flashing multiple roms and leaving bits behind as well = clean wipe .
jje.
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
I currently have Spike Pure ICS v 5.
What do you mean by Odin3 'deep clean'?
OJ77 said:
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
Click to expand...
Click to collapse
Read my last post..
Sent from my GT-I9100 using Tapatalk 2
so:
1. Recovery mode > format user data > wipe cache > clear dalvik > format system (from moutns and storage)
2. Download mode > flash stock ROM using odin 3
Did I get it right? Was there something i didn't wipe?
Before you flash a new rom, make sure you answer the requirements.Some ICS roms need to be flashed in specific way.
The way of doing a full wipe is you go in Clockwork mode, wipe data/factory reset, you wipe cache partition, then go to advanced wipe Dalvik and Battery stats, then go in mounts and storage ( i think ) and you wipe the cache from there, but nothing else in mounts and storage.If you wipe anything else there's a high percent of bricking your phone.If this doesnt help you, I doubt that anyone could give you any clearer instructions.
Good luck.
DONT FORMAT SYSTEM.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Followed by root and custom rom if you so wish .
jje
OK im confused now... do I format system directory in mounts and storage or no?
OJ77 said:
OK im confused now... do I format system directory in mounts and storage or no?
Click to expand...
Click to collapse
i always do personally.
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card.. I get errors and 'installation aborted' if i try to do it from CWM... does that mean formatting those 3 means Odin3 is the only way? Cus I'm not home and I don't have odin3 on me.... LOL!
OJ77 said:
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card..
Did you format sd card and totally wipe the lot = nothing on the phone .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
At this point you have no OS on the phone nor kernel rooted nor CWM .
Hence
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
skimminstones said:
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
Click to expand...
Click to collapse
Agree must try better .
Habit from replying to emails i guess .
jje
Thanks...
I did a 'full wipe' by doing t his:
1. Boot into CWM: wipe data, wipe cache, wipe dalvik, wipe battery stats, wipe system/data/cache from mounts.
2. Reboot into DL mode, flash stock ROM using Odin3.
3. Repeat step 1
4. flashed spike ICS v 7.3 using CWM. Stable so far.
Thank you!
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
budi.hermawan said:
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
Click to expand...
Click to collapse
I agree! I don't like ICS because is still unstable! My battery lasts very short with ICS and the phone overheats.
Moreover I hate the browser! I mean, The Galax S2 with GB still has the smoother browser of all the smartphones out there, and Samsung with ICS update messed it up! Now is laggy with micro stutters! Don't understand why!
OJ77 said:
The firmware was great but I didn't like that it still had TW.
Click to expand...
Click to collapse
You didn't need to go through all that trouble just because you didn't want TW (which I also hate, btw).
You could simply have installed another launcher (such as Go Launcher EX, ADW, etc) from Play Store and, since you were already rooted, uninstalled TW using Titanium Backup afterwards. It has to be in that sequence (install new then uninstall old).
this way you can have whatever ROM + kernel combination you like, and still use whatever launcher you prefer.
Ok so heres the info burb:-
My phone is UK SGS3 i9300 Vodafone, I rooted it a little while ago, tried a sammy variant custom rom (JB), then changed to paranoid android (cm10). I then tried injecting the sammy firmware files to try and get s memo work - it didnt work anyway, and i lost some data (had backups), so I updated the ROM (without data wipe) but things weren't right, so I was going to do a factory reset, but decided to change to a sammy rom again. aaaaand now it goes really wrong :/
I tried Psycho ROM (http://forum.xda-developers.com/showthread.php?t=1947072) I did a factory reset, and then installed it. the boot logo changed but it just began to bootloop. no adb logcat... o and i had the touch CM recovery with extsd support. I tried again, but also wiped dalvik, cache factory reset, this time i noticed that when i did the factory reset, it rebooted recovery. flashed it again to no avail. so i found UltimaROM (http://forum.xda-developers.com/showthread.php?t=1911572) it had the aroma installer which i liked. I used a laptop to transfer the files onto my extsdcard. factory wipe (rebooted), wiped dalvik n cache, and went thu the installer fine, but still hung on the bootanimation. and to my surprise it was still the one from psycho rom. I wiped again and tried to install again but same problem. EDIT: I just remembered that it came up with a modem choice... I wasnt sure which to pick...
so I did some research tried to find out what was wrong... Following a few suggestions, I downloaded the I9300BUBLG3 (search on sammobile says thats uk vod - 4.04) from sammobile.com and flashed it via odin. I did skip triangle away, because I was just going to put a custom rom back on it. I'm more concerned about data wipe causing a reboot recovery... I also flashed cf-root again over the top to get recovery again. It STILL hangs on the samsung logo! I have even used the recovery after cf root flash, it still reboots when you select factory reset -_- I can get into recovery, and download mode - so that something right? why is it rebooting when i wipe data? did i flash the wrong stock firmware? Whats the next step? what haven't i tried? PLEASE tell me its not fully bricked?
Thanks in advance
/data GONE?!?!
UPDATE: I've just tried wiping again, and viewed the recovery log, it said it couldnt find /data/... it looked on the sdext as well i think same with other wipes... it cannot find source :'( HELP! I've got to go out for now (without my phone :'( ) - so i hope to return to some advice...
When you go to advanced mode you can mount all parts? Try to set permission only to test.
You can format each part at advanced?
ok so the mount / unmount feature appears to work (or so it says), but when i go to fix permissions, and check log - sh:fix_permissions: not found
when I format system n cache n preload it works as far as i can tell via logs, when i did /sdcard/ it said it couldn't remove "." and ".." I guess that just mean it was already blank (which i had done b4 messing all these roms)
it also just occurred to me to try adb shell in recovery! ha and it works! I can see the sdcard0 and sdcard1 can even access /data!
ok heres what I've got in /data/...
/data/app/*.apk - - - - LOTS OF APKS (i guess wipe didnt work)
/data/data/ -- - - the data for my apps
/data/dalvik - - empty
/sbin/fix_permissions - - is there!
there are obv all the other folders like app-private, media, user,system, gps etc etc
SO why cant my recovery perform a data wipe without rebooting(and failing)?? Ooooorrr what do I have to remove via adb to flash a rom?
--------UPDATE-------
right heres how ive SORT OF fixed it.
I used adb shell with su to wipe data (didnt work without su) then formatted system, cache dalvik etc etc all with adb. I rebooted recovery and flashed UltimaROM. It works and it HAS booted - this is how my phone was left today.
I do have several strange problems tho. I know my cable is a little odd - it doesnt always connect right (maybe thats how i caused the problem - mtp style fyi)- but i cannot seem to get it to copy to the the extsd or sd via the cable. I can use solid explorer to transfer files etc, I can use wifi explorer to transfer files... so the sdcard appears to work. My internal sdcard shows a could of ROM zips that are 0 bytes, and I cannot delete them. I cannot "convert to user app" with titianium backup pro (aka TT) to uninstall the stock email app. TT also shows my internal as 12.1gb total?!?!?! I've not restored any of my apps bar a couple which ive done via the market.
Soooo is my internal partitioned wrong? or does it need an error fixed, or partition alignment... and WHHHHYYYY does my recovery STILL reboot when i try to wipe data (i tried just after installing the current ROM)?? what have I done wrong?!?!
internal screwed i think
BUMP! XD please see above for the update...
So much words! •_• anyway, since you are stuck on Sammy logo, then i guess you are on a bootloop? Just go to download mode and flash a stock firmware from sammobile.com
Sent from my GT-I9300 using xda premium
saywhatt said:
So much words! •_• anyway, since you are stuck on Sammy logo, then i guess you are on a bootloop? Just go to download mode and flash a stock firmware from sammobile.com
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
you might wanna read all those words
I downloaded the I9300BUBLG3 (search on sammobile says thats uk vod - 4.04) from sammobile.com and flashed it via odin. I did skip triangle away, because I was just going to put a custom rom back on it.
Click to expand...
Click to collapse
Ive done it already, ive got it to boot... look at my update post above. I mean 12.1gb internal is kinda worrying me.
Cannot make head nor tail of the problem .
Standard reply to a non boot is .
Boot to recovery format cache data sd card and system .
Flash stock rom via Odin .
No recovery flash CF root recovery first .
That should give you a clean wiped phone .
jje
OK well I'm going to make another thread now because it is booting. I have a different problem ATM really even tho its kinda a continuation of this... I'll change topic head to solved if I can...
Sent from my GT-I9300 using xda premium
I have an i9300 international version. It began freezing and boot looping.
Recovery and download mode were working. adb shell was working via recovery.
To figure out why it was bootlooping, I wanted to run adb logcat during boot, but to do this you need to enable usb debugging, and mine was disabled. Obviously I couldn't enable it because I couldn't boot, and even tried to enable via adb shell using the following steps:
/data/data/com.android.providers.settings/databases/settings.db: adb_enabled=1
and
/system/build.prop: persist.service.adb.enable=1
But I couldn't find the above sqlite database. In fact /data was empty and I couldn't access any system files via adb shell anyway.
So no usb debugging, which means the next step is flash a stock rom. I flashed I9300XXEMG4 (here) with Odin, wiped system,data,cache. Still bootlooping (samsung logo - kernel i9300 logo - samasung logo - kernel logo etc).
I read about the PIT file here. I read about how you should stay away from it at all costs. As this was a last ditch attempt I flashed the PIT file GT-I9300_mx_20120329.pit along with I9300XXEMG4.
The phone booted fine!
Unfortunately I just read this post about not coming back from EMG4... and I hadn't backed up the efs partition
Disclaimer: do not flash the PIT file unless you know what the hell you are doing.
P.S. if you have any problems with Odin not working (stuck before it starts flashing), close Odin, unplug USB and take the phone battery out, open Odin, put the battery in, boot into download mode then plug USB in. Worked fine for me.
Cheers
Everytime I flash the stock ROM, I will have bootloop. I get into stock recovery mode, do a factory wipe and reboot. My phone boots up normally after that.
YRAJ23 said:
Everytime I flash the stock ROM, I will have bootloop. I get into stock recovery mode, do a factory wipe and reboot. My phone boots up normally after that.
Click to expand...
Click to collapse
Why are you flashing the stock ROM? Upgrading? If you are flashing a different ROM or different Android version, your /data won't work with the new version. If you are flashing to a similar version, try only wiping the cache and dalvik cache.
thejonesyboy said:
Why are you flashing the stock ROM? Upgrading? If you are flashing a different ROM or different Android version, your /data won't work with the new version. If you are flashing to a similar version, try only wiping the cache and dalvik cache.
Click to expand...
Click to collapse
I'm a flash addict. I will try new ROMs. I case anything went wrong, this will by my rescue step. Last week, my phone's external speaker malfunctioned. So I need to get back to stock. I need to unroot and flash stock firmware. I encountered boothloop. So, do a factory wipe and reboot. All was OK.
YRAJ23 said:
I'm a flash addict. I will try new ROMs. I case anything went wrong, this will by my rescue step. Last week, my phone's external speaker malfunctioned. So I need to get back to stock. I need to unroot and flash stock firmware. I encountered boothloop. So, do a factory wipe and reboot. All was OK.
Click to expand...
Click to collapse
what type of speaker malfunctioning you got? I am facing some problem with audio/video apps. all audio/video related apps(even call ringtones) not running smoothly half of the time. I have tried many roms. Now i flashed stock firmware via odin and still have same issue.
I have not done any data/cache wipe before odin flash. Is full data/cache wipe is required for stock firmware via odin. OR any other solution you can suggest.
siwach said:
what type of speaker malfunctioning you got? I am facing some problem with audio/video apps. all audio/video related apps(even call ringtones) not running smoothly half of the time. I have tried many roms. Now i flashed stock firmware via odin and still have same issue.
I have not done any data/cache wipe before odin flash. Is full data/cache wipe is required for stock firmware via odin. OR any other solution you can suggest.
Click to expand...
Click to collapse
My phone was under warranty. So I reset the binary counter and reflashed stock ROM. Send it to Service Centre. They said my speaker was spoilt. So they replaced the speakers