Hi Guys,
Maybe someone already explained this, but I have a Euro Stock HTC pro that I wish to use with ATT network. Everything works fine but 3G, it only enables the Edge.
Do I miss any cab or something?
Thanks much,
Julius
Also, I tested with Monx/RR Rom but both without luck.
I am flashing radio to see if this is the problem
The Euro version is missing the US 3G frequencies.
But on the box it is claiming it has Quadband and have the 850/1900 freq. How could I check if the phone has it?
The HTC Touch Pro EU has 3G bands of 900/1900 (correct me if i"m wrong)
AT&T uses 850/2100 for 3G.
i dont know what to tell you buddy
For HSPA, the Euro version uses 900/2100 MHz and Quad band EDGE/GSM for 850/900/1800/1900 MHz. This is why you're only getting the EDGE signal.
The US 3G version has HSPA 2100/1900/850 MHz. More specifically ATT runs on the 850/1900 for 3G, EDGE, and GPRS.
You should take/send back the phone and buy a Fuze.
Thanks for both of your answer. Well, too late. I bought it when I travelled there. Anyways thanks!
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
JohnCody said:
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
Click to expand...
Click to collapse
T-mobile is also using HSPDA/3G @ 850 also and nowhere else? I hope so because pretty much half or better of the users of these forums are T-Mobile and *not* AT&T subscribers. Jus sayin.
JohnCody said:
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
Click to expand...
Click to collapse
ROM cooks do not have such fine grain control over radio bands.... Sorry.
I don't believe the T9193's radio has the 2100 Mhz band, otherwize I'd be able to use it in my area to get 3G coverage. (We only have Edge on the 850 Mhz band here)
Hopefully someone who knows for sure can answer this.
JohnCody said:
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
Click to expand...
Click to collapse
Hi mate,
you already tried this?
In Dialer > Menu (right soft-buttom) > Baseband > Band Frequency
or
Start > Settings > Personal Settings > Phone
But 850 Mhz is just for GSM not WCDMA... it's right?
2udCrRAZdK said:
I don't believe the T9193's radio has the 2100 Mhz band, otherwize I'd be able to use it in my area to get 3G coverage. (We only have Edge on the 850 Mhz band here)
Hopefully someone who knows for sure can answer this.
Click to expand...
Click to collapse
I'm pretty sure the T9193 has the 2100 band, but 2100 is useless in the US because AT&T uses 850/1900 for 3G. The T9193 is an Australian phone made for Telstar (their cell phone company). The 3G bands used over there are 850/2100. So, because AT&T also uses the 850 band, thats why we are able to use this phone with AT&T's 3G here over in the US.
However, the 2100 band of the phone is useless in the US because is was intended to be used for 3G in australia.
The good news is that AT&T is phasing out the 1900 band for 3G and switching everything over to 850, so the HD2 will just get more and more 3G coverage as time goes on and then even the 1900 band won't be used anymore so it would be irrelevant if the HD2 has a 1900 band or a 2100 band because both would be useless.
NRGZ28 said:
ROM cooks do not have such fine grain control over radio bands.... Sorry.
Click to expand...
Click to collapse
Gotcha - thanks for the info.
2udCrRAZdK said:
I don't believe the T9193's radio has the 2100 Mhz band, otherwize I'd be able to use it in my area to get 3G coverage. (We only have Edge on the 850 Mhz band here)
Hopefully someone who knows for sure can answer this.
Click to expand...
Click to collapse
Well, you neglected to say where "here" is
The best available combination for world-wide 3G access is 850/2100 Mhz. This is because:
1) 850Mhz is used in Canada, US, S Americas, Aus, S Africa for 3G broadcasting in regional areas (and in some city areas)
2) 2100Mhz is used in Asia, EU, Aus cities for 3G broadcasting
This is due to the actual physics of velocity = frequency x wavelength
Some telcos use 1900Mhz in the cities, but also broadcast in 850Mhz
Other telcos use 900Mhz in the regional areas, but also broadcast in 2100Mhz in the cities
ATT in the US uses 850mhz in the regionals and 1900Mhz in the cities. This ensures that "their" PDA's cannot use other SIM's - I have no idea why the dumbed-down US market meekly accepts that
The perfect combo is tri-frequency hardware, such as PDA manufacturers used to provide but do not any more (no excuses, it's just straight cost-cutting and sleight-of-hand marketing BS to suit the greedy telcos)
The HD2 released in Aus through Telstra is hardware-filtered for 2100/850 Mhz, the best available combo for world-wide use (not perfect, of course)
The HD2 released in EU/Asia is 2100/900 Mhz. This will access 3G in most cities world-wide (note that China uses 2100/850) but has limited coverage in regional areas - yes, I know there many 900 Mhz deployments but these are very limited geographically
The HD2 released in the US is 1900/850 Mhz. This is very limited for world-wide cities and excludes 3G coverage for those countries that use 2100/900 Mhz
None of this has any relation to GSM coverage, so please do not confuse them
Is the hardware actually different?
I live in NZ and unfortunately bought a T-Mobile unit which is set up for 1700/2100mHz which means that when in the cities I get full broadband, but in the regions I only get dial up speeds through GSM.
My question is does anyone know if the hardware could actually use the 900mhz broadband - or is it a pipe dream on my part that hopefully someone will release a ROM to access some previously hidden hardware?
I do recall with my Touch that there was a GPS built into the hardware that no-one was aware of for a year or two!
mikey555 said:
I live in NZ and unfortunately bought a T-Mobile unit which is set up for 1700/2100mHz which means that when in the cities I get full broadband, but in the regions I only get dial up speeds through GSM.
My question is does anyone know if the hardware could actually use the 900mhz broadband - or is it a pipe dream on my part that hopefully someone will release a ROM to access some previously hidden hardware?
I do recall with my Touch that there was a GPS built into the hardware that no-one was aware of for a year or two!
Click to expand...
Click to collapse
The hardware is definitely different...
JohnCody said:
The T9193 is an Australian phone made for Telstar (their cell phone company).
Click to expand...
Click to collapse
The Phone company in Australia is Telstra (just in case you are goggling it and wonder why you cant find it)
t9193 vodafone
i can use 900/2100 bands on t9193
i use Vodafone australia on Telstra hd2 with quick 3g data everywhere
what are the hardware differences?????
am i alone?
is there anyone else in this community that has
T9193 + Vodafone AUS + Custom ROM/Radio
Everyone keeps pasting crap about incompatibility but it seems to be fine
will the flyer run on any u.s carriers network? because it would suck to have to be connected to wifi in order to enjoy this tablet. i have clear 4g service if only this was a 4g capable device it would make it epic and also will it have sms and mms?
thanks in advance
you need to look for the frequencies of the device
Network Band
GSM 850, GSM 900, GSM 1800, GSM 1900
3G 900, 3G 1700, 3G 2100
i think 1700/2100 is TMobile, but you'll have to check on their site
This will be sprint 4g http://newsroom.sprint.com/news/htc-evo-view-4g-fact-sheet.htm
Sent from my ADR6300 using XDA App
its on the best buy website you can pre order the wifi version. i also heard its suppose to come to tmobile
I have looked for days now across multiple forums to get some insight on this issue:
I want to use my Thunderbolt in Thailand. Haven't found any threads that speak of success, only conjecture that it won't work.
Homework I've done (unless i understand it incorrectly):
- Verizon 3G operates on the 850 / 1900 mhz cdma band. Radio Frequency Summary
" The following is a list of known frequencies which Verizon employs in the United States:
Frequencies used on the Verizon Network
Frequency Protocol Class
850 MHz 1xRTT/EV-DO/eHRPD 3G
1900 MHz 1xRTT/EV-DO/eHRPD 3G
700 MHz LTE 4G
1700/2100 MHz(AWS) LTE 4G"
- Truemove, a popular mobile company in Thailand has early links to Verizon and their 3G service operates on the 850mhz wcdma band
"What should I do if I want to use TrueMove 3G service but I don’t have a 3G 850 MHz mobile phone?
Basically, it’s not that all mobile phones work on any band. Each 3G compatible mobile phone supports different bands. For example, if you have a 3G 2.1 GHz or 900 MHz or 2G mobile phone, you will not be able to use TrueMove 3G service because TrueMove offers 3G service on 850 MHz band.
If you want to enjoy TrueMove 3G service, it is recommended that you buy a 3G WCDMA 850 MHz mobile phone or visit any True Shops and ask for a 3G compatible mobile phone. True Shops also sell different smartphones that support different mobile platforms e.g. iPhone 3G/3GS, BlackBerry Bold 900/Bold 9700 and Motorola Milestone."
- I spoke with verizon after reading other forums about 'unlocking' thunderbolts and was told that the thunderbolt comes unlocked, so unlocking wouldn't be necessary anyway.
- Lastly, it seems that many people have successfully put a 3G SIM into a 4G SIM slot on there phone and received 3G service.
....So what am I missing? What would prevent me from being able to use my Thunderbolt in Thailand for simple 3G service if the carrier (Truemove) works on cdma based bands? What extra might I have to do to get it to work?
PS: Sorry I can't insert the links directly in the post. Not allowed since this is my first post.
Thanks for any help
Hi there,
I've got a Verizon HTC One Max. I rooted and put CM12 on my device, and it seems that some of the network bands aren't compatible with this device. After doing a bit of research, I noticed that the LTE Bands supported by this device are the ones used on my Canadian cellular carrier; However, when I select those types of networks to be used on the device, I get no signal picked up. I'm currently using "WCDMA only" as my selected network band for the device, as none of the GSM, LTE, or CDMA options work. It seems that it only picks up the 3G and 4G bands, but no LTE or GSM.
Now I don't know if this is because of the type of device I purchased (like I said, I found a way to get service to the phone through WCDMA), but I was hoping that maybe I could utilize the LTE network in the area instead of using the awful 3G and 4G speeds.
I'm on Virgin Mobile's network, which is a partner network of Bell Mobility Canada. Their supported network bands are:
"Although both are different and independent from one another, both the CDMA and HSPA+ networks use the 850 and 1900 MHz frequencies. Bell's LTE network uses Band 4 Advanced Wireless Services (AWS 1700/2100 MHz) in most coverage areas and Band 7 (2600 MHz) in a few areas."
The Verizon HTC One Max is compatible with the following:
Verizon: 850/900/1900/2100 MHz with HSPA+ up to 14.4 Mbps and LTE: 700 MHz
So looking at this, I might be an idiot - it looks like on second observation, maybe they're not compatible. I figured I'd post this just to double check anyway for good measure. Anyway, if you've got anything to provide, that'd be great.
Thanks.