Related
i am consistently getting low Quadrant Benchmark scores on my SG2. is there a hardware fault with my device? my average score is 2800 and there is virtually nothing running in the background when performing the benchmark tests.
Does it fell slow? If not you shouldn't care, Quadrant is a pos.
Sent from my GT-I9100 using xda premium
well, interestingly, gameplay isn't so great in asphalt 6 adrenaline samsung apps free version, and there is minimal lag when swiping between screens in apps folder (could be due to crappy screen protector)
but i've gone through more than one sg2 in the past, and this is the first one showing scores less than 3000. =(
I do occasionally get 3000-3200, but in most cases <3000 (even when doing 3-4 tests in a row)
There is a new option in settings called system power saving that limits the cpu to only 800mhz, try that.
Sent from my GT-I9100 using XDA App
MaBlo said:
Does it fell slow? If not you shouldn't care, Quadrant is a pos.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
+1.
Quadrant is ****. Nuff said.
I have the 2.1 siyah kernel and i left it in perfomance govener for a few hours by mistake is it ok too run 1.6ghz for a few hours stright
Actually SGS2 is too fast already and i see no need for OC at all
Anyway, i don't really know about that kernel, but i believe that at 1,6GHz it increases voltage which isn't too good thing and might reduce processors life time.
Sent from my GT-I9100 using xda premium
Unless you make 100% usage at 1.6 ghz for some straight hours, its not going to harm you and your mobile except your battery life
Heat is a cpus worst enemy. Also keep the voltage in mind when ocing. Your phone will only be running at 1.6 under full load so a couple of hours of max activity will get the phone hot and with heat come instability.
Sent from my GT-I9100 using xda premium
I dont know if it was running %100 cpu but it was at 1600mhz the whole time right now everything is ok but it seems to get slightly warm quick and runs 31 celius battrey but that might just be normal
Sent from my GT-I9100 using XDA App
31 sounds right
Sent from my GT-I9100 using xda premium
What profiles do you use for better life battery?
Sent from my MB855 using XDA App
avishay_89 said:
What profiles do you use for better life battery?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
As I understand, underclocking will only help you slightly, you're better off using apps like Juice Defender or Green Battery (forget the actual name) to help with battery life.
I use Juice Defender. And the profile I use is screen off with minimum and maximum clock speed at the lowest setting and the priority to 100.
Unless you have an undervolting kernel. Then you undervolt
Sent from my MB855 using XDA App
I run mine at -25 with no problems.
Sent from my Photon via XDA
I'm using 1.3 kernel with skinny rom. What can you recommend me?
jokersax11 said:
Unless you have an undervolting kernel. Then you undervolt
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Use myrt undervolt program. You can get it from the market. Then undervolt -25.
Sent from my Photon via XDA
xTMFxOffshore said:
Use myrt undervolt program. You can get it from the market. Then undervolt -25.
Sent from my Photon via XDA
Click to expand...
Click to collapse
Have you tried going lower?
My current battery saving setup:
Rom/Kernel: joker skinny 1.3 / joker 1.4 oc beta ext4ready wifi highpro
Battery Saver Mode: Maximum
SetCpu Main Clock setting: 216-750Mhz (with joker's tuning @ 750 it benches about the same as a bone stock MoPho)
SetCpu Profiles: Screen off= 216-456mhz, Charging (think dock use)=216-1400Mhz
Undervolt:
1.4Ghz=1200mV (-100mV)
1.2Ghz=1100mV (-100mV)
1.0Ghz=900mV (-100mV)
750Mhz=750mV (-125mV)
456Mhz=650mV (-150mV)
216Mhz=595mV (-175mV)
RESULTS: battery is at 94% after 11 hours of standby with WiFi OFF, 3G ON and good signal levels. This includes checking the time a couple of times and my alarm this AM. The best I could ever get with my super tuned OG Evo was 1% per hour of standby.
Wow
Lokifish Marz said:
My current battery saving setup:
Rom/Kernel: joker skinny 1.3 / joker 1.4 oc beta ext4ready wifi highpro
Battery Saver Mode: Maximum
SetCpu Main Clock setting: 216-750Mhz (with joker's tuning @ 750 it benches about the same as a bone stock MoPho)
SetCpu Profiles: Screen off= 216-456mhz, Charging (think dock use)=216-1400Mhz
Undervolt:
1.4Ghz=1200mV (-100mV)
1.2Ghz=1100mV (-100mV)
1.0Ghz=900mV (-100mV)
750Mhz=750mV (-125mV)
456Mhz=650mV (-150mV)
216Mhz=595mV (-175mV)
RESULTS: battery is at 94% after 11 hours of standby with WiFi OFF, 3G ON and good signal levels. This includes checking the time a couple of times and my alarm this AM. The best I could ever get with my super tuned OG Evo was 1% per hour of standby.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Can somebody link to the undervolting thread. Cant seem to find it.
Thanks in advance
Sent from my MB855 using XDA App
Yeah. I have gone to -50 and it's stable and good to go.
Sent from my Photon via XDA
How do you check stability? Just from playing with the phone or run some benchmarks?
Sent from my MB855 using XDA App
Stress tests
Sent from my Photon via XDA
I seem to be running -75 okay, no issues.
Sent from my MB855 using xda premium
I'm doesn't sure about something.
Does the undervolt affects the clock speed?
Sent from my MB855 using XDA App
I don't believe so.
Sent from my Photon via XDA
Who prefers LiveOC over the regular OC system?
Just wondering.
Sent from my SCH-I500 using XDA App
I prefer to use voltage control and overclock the ol' fashioned way lol...I have played with nstools and live oc, but its more than I really need.
110%, 1320 mhz, stock voltages
Sent from my SCH-I500 using xda premium
neh4pres said:
110%, 1320 mhz, stock voltages
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Which governor do you use? GlitchOndemand
Glitchass v2
Conservative
Interactive
Powersave
Performance
Lazy
Smoothass
Sent from my SCH-I500 using XDA App
i use glitchondemand/ fiops overclocked @ 1500mhz with no undervolt.
Enyo. said:
Which governor do you use? GlitchOndemand
Glitchass v2
Conservative
Interactive
Powersave
Performance
Lazy
Smoothass
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Stock..
Sent from my SCH-I500 using xda premium
droidstyle said:
i use glitchondemand/ fiops overclocked @ 1500mhz with no undervolt.
Click to expand...
Click to collapse
No heat?
Is this dangerous? With no overheat, is this dangerous? Are you using this day to day?
Didn't get into oc too much.
neh4pres said:
Stock..
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
thanks so much
Sent from my SCH-I500 using XDA App
Enyo. said:
No heat?
Is this dangerous? With no overheat, is this dangerous?
I've never overclocked this high before. Didn't get into oc too much.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
So.. You never tested 1.9 ghz before you released your kang kernel?
Sent from my SCH-I500 using xda premium
neh4pres said:
So.. You never tested 1.9 ghz before you released your kang kernel?
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
I tested it.
For a day or two.
But using my phone day to day.
Sent from my SCH-I500 using XDA App
enyo... I have tested with glitch kernel at 1.7 ghz and i currently hold the record benchmark for this device on antutu using performance governor. After testing for a half hour at that speed i fell asleep with the phone stuck at that speed. I'm typing this message with that phone now. That was done with glitch v13. The most i ever got from high clock speeds was freezes and reboots.
However, if you get stupid with live oc the story can be very different.
But to give an idea of what my phone handled back then, go to the cm7 glitch thread and check what the gpu/buss speed was at 1.7ghz. But remember that those bus/cpu speeds, and voltages were finely tuned by tk , and you probably won't be able to push that hard with live oc.
Sent from my SCH-I500 using xda premium
neh4pres said:
enyo... I have tested with glitch kernel at 1.7 ghz and i currently hold the record benchmark for this device on antutu using performance governor. After testing for a half hour at that speed i fell asleep with the phone stuck at that speed. I'm typing this message with that phone now. That was done with glitch v13. The most i ever got from high clock speeds was freezes and reboots.
However, if you get stupid with live oc the story can be very different.
But to give an idea of what my phone handled back then, go to the cm7 glitch thread and check what the gpu/buss speed was at 1.7ghz. But remember that those bus/cpu speeds, and voltages were finely tuned by tk , and you probably won't be able to push that hard with live oc.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
So just overclocking, @ 1.5GHz or 1.2GHz and, monitoring the temp, processor will last just as long as it would non overclocked?
Sent from my SCH-I500 using XDA App
Enyo. said:
So just overclocking, @ 1.5GHz or 1.2GHz and, monitoring the temp, processor will last just as long as it would non overclocked?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
It's all luck. Chance. Fate. If tk has not burned his phone yet i would say you have a lot of catching up to do to get the mileage he has. I had mine overclocked 1.5ghz for a few months.. And guess what, i have never monitored temp. But hey, i pay an extra couple dollars a month on top of insurance for lifetime warrantee. So i think my phone burning up would fall under that. But anyway, your stressing out to much over it.
Sent from my SCH-I500 using xda premium
neh4pres said:
It's all luck. Chance. Fate. If tk has not burned his phone yet i would say you have a lot of catching up to do to get the mileage he has. I had mine overclocked 1.5ghz for a few months.. And guess what, i have never monitored temp. But hey, i pay an extra couple dollars a month on top of insurance for lifetime warrantee. So i think my phone burning up would fall under that. But anyway, your stressing out to much over it.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Thanks so much.
Going to over clock to 1.5, not going to stress about it. Ulcers come like that
Sent from my SCH-I500 using XDA App
no heat and i use it daily...first time i can ever say this when overclocking to 1500. i agree with neh4pres posts...becareful with live oc it can screw your device up quick. most folks will never see any benifit by using live oc imo anyway. part of the reason why i just use vc...
I actually use 10% live oc and 1200mhz step... All voltages stock. Fully stable and it FLIES
Sent from my SCH-I500 using xda premium
I must have every bit of speed. That said here's the setup:
ICS AKOP 25 Glitch 14 B5 for 6.0
1200 step with 118 LOC
Glitch OnDemand with some OV and UV. (see pics)
Live OC is the way to go as you get a boost to your GPU and RAM in addition to the usual CPU bump.
thisguy23 said:
I must have every bit of speed. That said here's the setup:
ICS AKOP 25 Glitch 14 B5 for 6.0
1200 step with 118 LOC
Glitch OnDemand with some OV and UV. (see pics)
Click to expand...
Click to collapse
thx a bunch for this nfo. just used ur voltage settings for my device and was able to overclock into the 1300mhz range from the 1200 step. im impressed since last time it was very unstable at 1200 for me.
thx.
swagooo said:
thx a bunch for this nfo. just used ur voltage settings for my device and was able to overclock into the 1300mhz range from the 1200 step. im impressed since last time it was very unstable at 1200 for me.
thx.
Click to expand...
Click to collapse
with the devil kernel i have been running 102% loc between 200-1000mhz. on glitch i can oc up to 1500mhz with no loc, soon as i add any loc the device freezes. im guessing my leakage is not dialed in correctly for glitch, also i get a bit nervous playing wit arm voltages.
droidstyle said:
with the devil kernel i have been running 102% loc between 200-1000mhz. on glitch i can oc up to 1500mhz with no loc, soon as i add any loc the device freezes. im guessing my leakage is not dialed in correctly for glitch, also i get a bit nervous playing wit arm voltages.
Click to expand...
Click to collapse
Try these i have not had a reboot in over a week
Sent from my SCH-I500 using xda premium
I done benchmark test in my new SGS3 I9300, As previously i have seen in many videos that after test S3 is winner but after my test My Device was on second Place.. Why So? Is there any problem in my device???
What benchmark test did you run?
Benchmarks are really just numbers dude, if your device performs well in day to day use then it's fine
Sent from my GT-I9300 using xda app-developers app
Benchmark in S3
I run Quadrant Standard Edition & AnTuTu Benchmark both..its was 20 to 40 fps..
ravitomar said:
I run Quadrant Standard Edition & AnTuTu Benchmark both..its was 20 to 40 fps..
Click to expand...
Click to collapse
Turn off power saving and run the antutu test again it should read at 60 fps
Sent from my GT-I9300 using xda premium
I run my s3 on three different benchmark apps. In quadratn the score was 5340
In antutu 13567
In geekbench 2 1876
What wer your scores??
And obviously s3 will not be first because htc one x+ , note 2, nexus 4 will score higher cause of the 2gigs of ram and they are overclocked
Sent from my GT-I9300 using xda premium
IntenseTorture said:
I run my s3 on three different benchmark apps. In quadratn the score was 5340
In antutu 13567
In geekbench 2 1876
What wer your scores??
And obviously s3 will not be first because htc one x+ , note 2, nexus 4 will score higher cause of the 2gigs of ram and they are overclocked
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Benchmark scores are different depending on what kernel and Rom you are using.
Sent from my GT-I9300 using xda premium
Im on stock jb
Sent from my GT-I9300 using xda premium
IntenseTorture said:
Im on stock jb
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I found using shiyah kernel my benchmark was higher than stock kernel also the benchmark differs whether you have power saving on or off as with off it gives a higher score as on limits the cpu.
Also depends on what you have running in the background or if you've overclocked etc etc
Sent from my GT-I9300 using xda premium
IntenseTorture said:
Im on stock jb
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Benchmarks don't really mean anything!! And most of the time benchmarks are software manipulated....
You should judge your phone by its behavior, if it lags, stutters or drains battery you have a problem. If not it's okay!!!
my benchmark
mine were, In quadratn the score was 9334
In antutu 11025....
ravitomar said:
mine were, In quadratn the score was 9334
In antutu 11025....
Click to expand...
Click to collapse
Quadrant 9334? Looks like you made a world record !
Well I get 14.9 k in antutu & 7k in quadrant the biggest thing which effects Is the temperature of phone if its hot then scores will reduce because cpu throttles and underclocks too 800mhz
But benchmarks don't matter much
sent from my gs3 GT i 9300
----------------------------------
Dual boot siyah kernel
1st rom stock jb 4.1.1
2nd rom cm 10 4.1.2-4.2
Mine:
Quadrant: 6464
ES 2.0: 47.00
Antutu: 18153
I used to worry about quadrant scores, until I realized that they truly mean nothing compared to other devices. The only times the scores are handy for is comparing runs OF YOUR OWN PHONE. That's it, nothing else.
------------------------------------
If it was easy you'd of hired the guy at Home Depot to to it.
ravitomar said:
mine were, In quadratn the score was 9334
In antutu 11025....
Click to expand...
Click to collapse
Turn off power saving and run again