guys i dont know what to do now it's 5:30 here now. i flash baseband 67 on my stock rom 2.1 but the result is unknown baseband i did out the sd card the factory reset but didnt work to me. when i try to repair using pc companion its's said theres no software upvailable please help what i need to do first? can i flash other firmware Generic version 2.1update1 build 2.0.2.A.0.24? my device before is SO-10B ntt docomo it came from japan. should i flash into SO-10B? i really need help!
EDIT: its ok now i flash 2.1_2.0.2.A.0.24 with DualTouch already.. but i have 1 question if need to flash to baseband 67 i need to custom rom? like cm6 with x10i firmware then flash baseband 67? or i can directly flash in stockrom 2.1 with x10i firwmware?
Just flash the older baseband back, the one which you were on.
P.S: Post should've been in the Q&A section
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
kozxmartt said:
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
Click to expand...
Click to collapse
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance. can i flashbaseband even im in cm6? without flashing firmware stock?
gAracUh said:
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance.
Click to expand...
Click to collapse
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
kozxmartt said:
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
Click to expand...
Click to collapse
oh thank you again! but i can flash custom rom in xrecovery right? last question
Are we talking about a stock rom?
In any case just go back to your previous BB (the one that is supposed to work with your stock rom).
gAracUh said:
oh thank you again! but i can flash custom rom in xrecovery right? last question
Click to expand...
Click to collapse
Yes, you have to flash custom ROMs in xrecovery.
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
agentJBM said:
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
Click to expand...
Click to collapse
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
gAracUh said:
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
Click to expand...
Click to collapse
1.Flash Stock
2.Flash Baseband
3.Flash Rom
gAracUh said:
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
Click to expand...
Click to collapse
If you know that, why are you trying to use a incompatible baseband with his ROM?
I find it ironic that people are using that same line over and over suddenly.
They come and ask for help then act like they know what the problem is.
Seriously i am weird ed out.
3 words i am starting to hate "Help, Please, Bootloop"
What version if Trips IRIS do you want to flash.
1.5.0 works well on baseband 67
There are a couple of files you need to patch afterwards or you may get keyboard and/or wifi issues - they are the network library and keyboard layout files. This patch was put up by cobrato but the links to them were in a thread that got deleted.
If you can't find them pm me - I should have them lying around somewhere.
Sent from my X10 TripNMiUI-IRIS using XDA App
I got SGA with S5830BUKA7 Vodafone provider firmware. I went to samfirmware to get Gingerbread FW to update it and got confused with the following:
First check your firmware via our SamFIT and make sure you always use firmware files from your own region to prevent problems.
Does that means that I can only use S5830BUKC2 which is the latest FW from Vodafone?? Can i flash this phone with S5830XXKPH??
I am sorry if there is already an answer to this question in the forums, but i couldn't find it.
Thx in advance.
I flashed using KPH FW and it works
starshade said:
I flashed using KPH FW and it works
Click to expand...
Click to collapse
same here, i m frm india and flashed with kph which is european version, and everything is wrking fine..
i have a question. I have 2.3.3 lightening rom. I want to update to 2.3.4 lightening rom. Do i have to install the stock XXKH3 first ?
I have XXKF2.
And another question.
Why the update doesn't show up on kies that there is a update for 2.3.4 ?
Raymi95 said:
i have a question. I have 2.3.3 lightening rom. I want to update to 2.3.4 lightening rom.
YES follow the instructions
Do i have to install the stock XXKH3 first ? Follow the instructions otherwise no.
And another question.
Why the update doesn't show up on kies that there is a update for 2.3.4
You dont have Samsung firmware you have unofficial firmware simple .
jje
Click to expand...
Click to collapse
Hi ! I am planning to Flash the OpenOptimus ROM in my P500, but have a confusion.....
I don't know whether my baseband is older or newer as per OpenOptimus' requirement..........I am currently running Stock Gingerbread 2.3.3 V20C, will the baseband with my stock ROM support OpenOptimus???? AFAIK, it's based on V20C ROM, so it should support the baseband with my stock ROM........Still i am not sure..............PLZ REPLY.........
Go flash it.u are on the right baseband.
ashishv said:
Go flash it.u are on the right baseband.
Click to expand...
Click to collapse
Hey, Thanks for your reply!!! Now i am Ready to flash it!!......
Hello Everyone ,
i Have install Resurrection Remix ics But i don't like it ,
There Many Problems..
So now i should flash old bootloader then official Samsung ROM 2.3.5 , The ROM with 4 Files.
or i flash it directly ?
just get ROM frm here http://forum.xda-developers.com/showthread.php?t=1075278
i say go for LA2 /LA3 and flash with ODIN.
no need to do anything else, you will now be on stock 2.3.6
you need to CF-root later if you want root.
Thanks but i got Stock Arabic Gingerbread 2.3.5
(( Rom With 4 Files ))
i want to Flash it , i can or there will be problems ?
Ali1996 said:
Thanks but i got Stock Arabic Gingerbread 2.3.5
(( Rom With 4 Files ))
i want to Flash it , i can or there will be problems ?
Click to expand...
Click to collapse
so what is the problem ?
flash the rom you got via odin like before you did it.
it's That working 100% ? ,
some people say there will be problem.
Ali1996 said:
it's That working 100% ? ,
some people say there will be problem.
Click to expand...
Click to collapse
i have done it alot. no issues faced yet
budy if you want arabic than get the latest stock official, not the leaked ones as i remmber one arabic rom had issues......
this the latest for Arabic
I9100JPKJ2