Situation : 2 SE X10i's.
1 black with xRecovery. Works ok.
1 white with xRecovery. After (re)booting the phone, xRecovery is loaded immediately.
It's a bit annoying, how can I fix this?
Have you try to ReFlash the RoM..?
Hope it can be fix after ReFlashing..
Is it ROM-related or must I reflash/re-install xRecovery?
I'm not sure..but some ROM put a Reboot/Restart options that in Power Menu and sometime Reboot/Restart options mean Restart to xRecovery..
But Re-Installing XRec. is better to solve the problem..
Coz I've the same problem when I Flash My RoM with WB 3.6..but after ReFlashing (Fresh Install)..I solve the problem..
If you press reboot in recovery, its boot to your rom or not?
Try wipe dalvik and fix permission.
And let me know if it solved.
Sent from my SO-01C using XDA App
Reboot in xRecovery is to ROM.
Reboot from phone is with option 'reboot' not into recovery. The X10 doesn't support this.
Even when the phone is turned off, it boots into xRecovery.
I'll try Dalvik cache and permissions.
Do you have "RebooT Options Application (.Apk from market or anywhere not include with the Rom)" installed before..?
If you have..I think you need to Re-Flash the both Rom nor xRec..Remember to BackUp your data first..it's only take 15 mnt and you done..no more problem is you do it correctly..
Never heart of that app.
We don't reboot that often.. It's off or reboot.
Our X10's don't listen to other options I think
Related
Hi there.
I have problem with all ROMs. I used CyaNoComb v1.1. In CWM i tap fix permissions. When it get finished I reboot the phone, type the PIN and than... I openned some app and than error, I tried other app and than error too. I wiped data, patrition chache, dalvik cache, battery stats. Than I tried to install ROM(FroyoComb v1.6) and the phone several times stuck at bootanimation. Animation freezes and I can do nothing. I rebooted the phone, tried to go to Android but I can't. I several times tried to install ROM(few roms) but it do the same. Than i restored SE stock 2.1 from my backup and it works normally... Than i tried to do clean install of any rom but nothing changed. I restord from my backup and i want to update from SEUS but when I hold back and connected phone to PC it says:Failed to detect product. The product could not be identified. Please disconnect and try it again.
I tried several times but nothing changed. Please help, what should i do?
Can anyone upload his backup from clean install FroyoComb or other rom? THANKS
Are you aware that installing froyocomb 1.6 and slades - umm help me - 'slades' 6.0 as clean install (wipe user data) does not work as expected?
People who waited report, they waited about 1-2 hours until it finished.
This is a known bug and will be fixed soon.
So try prvious versions or better the CyaNo editions - this should work.
Maybe fixing permissions is no good idea in this roms. Use your backups to have a running systems - if you haven't any backup: why the hell not?
sent with my mini pro
I have backup only from Stock ROM... Going to try older versions...
edit: What a HELL?! Slade's better than Sonny Ericsson. CyaNo v1.3 booted perfectly. But I still prefer CyanoComb or FroyoComb
There is currently a problem with Froyocomb 1.6 and slades rom V6.... You cant just clean or fresh install them.... You should read the comments my friend lol but here is how u wud install froyocomb 1.6
From ure stock install root and xrecovery then wipe dalvik cache and factory reset wipe everything necessary then install froyocomb 1.5 .... Boot it once play around for a minute or two log in ure google account and then go back into xrecovery, wat u will notice is that it becomes orange and this is clockwork mod recovery better than xrec its still the same dnt worry.... NOW WHAT U DO IS .... Without deleting anything, install froyocomb 1.6... It shud work coz thats how mine did hope it helps if not please ask
..::XDA RocK::..
I just rooted my X10 mini and trying to install MiniCM7.
I did followed the instruction as in this link-http://forum.xda-developers.com/showthread.php?t=1068553
Unlocked my bootloader, flash the firmware named-"E10_nAa-02_2.6.29-nAa-02.ftf" and press the back button repeatly once the logo screen appear. By the way, my logo screen is a crashed image, I think it's normal so I just continue.
Getting into CWM, I followed the instruction also. Backup, Factory Reset and installed the updated.zip and gapps.
Done all the installation, I select " reboot system now" ( I think that's the reboot right?)
THINGS COME WRONG HERE!
After reboot, crashed image logo screen again! I wait for around 30 seconds, it automatic reboot! Crashed image logo screen appear again.....
I still can boot into CWM but can't get into normal OS anymore.
Perhaps I've done something wrong during the process, but I did followed the step.
What can I do now?! I just want back my original OS now.
Can someone help me please?
Download and copy to sdcard the ROM MiniCM 2.0.7
Flash it via recovery
the distorted boot logo is normal
moedjs said:
Download and copy to sdcard the ROM MiniCM 2.0.7
Flash it via recovery
the distorted boot logo is normal
Click to expand...
Click to collapse
obviously he did that. also, it is 2.1.1, 2.0.7 is for stock kernel, and he has NAA custom kernel.
From what I see there you flashed NAA kernel v02, flash the newest one and try again.
Did you check the kernel was updated correctly? Try to reflash miniCM following the steps again, if your kernel is cracked and NAA kernel is installed correctly, you mustve missed a step during the rom installation. go through it again and let us know.
moedjs said:
Download and copy to sdcard the ROM MiniCM 2.0.7
Flash it via recovery
the distorted boot logo is normal
Click to expand...
Click to collapse
Do i need to Wipe data or do anything before flash?
Wipe data/factory reset after you flash the ROM. Then flash gapps.
And BTW, nAaKernel-03 is out. (Go here). You should use that with MiniCM7-2.1.1.
Hope it helps!
Best,
Sam
kszai said:
Do i need to Wipe data or do anything before flash?
Click to expand...
Click to collapse
Just wipe the phone (factory reset), no need to flash gapps..
You just wanna see your phone revives again
After it's ok, then you can flash the MiniCM7 2.1.1 again and together with gapps of course, but before you flash Minicm7 2.1.1 you have to wipe the phone first
after flash the ROM and the gapps..isit select "reboot system now" to reboot? ><
kszai said:
after flash the ROM and the gapps..isit select "reboot system now" to reboot? ><
Click to expand...
Click to collapse
Yes. Reboot = restart.
If you think reboot = factory reset, then no.
Wipe = Factory reset.
On button + Home button also can reboot..so I don't know which to use..><
I tried to flash MiniCM7 2.0.7 but it say the baseband is not compatible with the ROM..update baseband to : M76XX-TSNCJOLYM-53404015.
what to do now? ><><><
anyway thanks for helping me..
kszai said:
On button + Home button also can reboot..so I don't know which to use..><
I tried to flash MiniCM7 2.0.7 but it say the baseband is not compatible with the ROM..update baseband to : M76XX-TSNCJOLYM-53404015.
what to do now? ><><><
anyway thanks for helping me..
Click to expand...
Click to collapse
To update baseband update via PC companion. if that does not fix it, look for a tutorial to flash custom firmware with baseband 015, there are quite a few on the forums.
Why press 2 buttons to reboot when you can press only one? youre overcomplicating things.
Isit what in this link? -> http://forum.xda-developers.com/showpost.php?p=9067949&postcount=1
So which one should I flash? And my Mini still in the situation that stuck on distorted logo, only able to boot into recovery, nothing else I can do.
Personally I wouldnt just give up after what you've allready done.
Your phone is in no danger. I've been in your position lots of times.
Since you are able to enter the CWM menu,
just try to reinstall 2.1.1 again, wipe everything, install gapps, and try again.
I would recomment kernel 03 instead of 02 tho, but it isnt needed to get 2.1.1 to work.
Also, when following this:
"Once the logo appears, press the back button repeatedly to enter CWM4.x.
- Select 'backup and restore -> Backup'
- Select 'wipe data/factory reset' (SUGGESTED)
- Select 'apply update from sdcard'
- Flash gapps"
Instead of "- Select 'apply update from sdcard' "
Select a custom .zip (not update.zip, but find the CM7 2.1.1.zip file on your SD-Card).
Then do the rest.
hope you get it working
Good to see solutions to your problem, but please post in general or faq in future. Please report your own post (I think you can) and select "move thread" or something like that.
Sent from my X10mini using XDA App
i m also flashed with update.zip after reboot hang on sony ericsson text and nothing happened all time same error
plz help seniors members
yusufali786 said:
i m also flashed with update.zip after reboot hang on sony ericsson text and nothing happened all time same error
plz help seniors members
Click to expand...
Click to collapse
read two posts above you.
Try it.
Was in the same boat until I flashed NaA Kernel-02 , everything was fine after that.
i am using Onecosmic latest ICS rom and his provided kneral
is it the rom problem or i can setting turn the screen off while charging the phone?thanks~
Screen on When Charging
Foodil,
I had this problem way back when I was on one of the MIUI roms.
My fix: reboot to recovery and fix permissions. If this doesn't work then...
backup rom and SMS/MMS
reboot to recovery
nandroid backup (advanced)
wipe dalvick cache and wipe cache
format system
reflash rom
fix permissions
reboot system.
Good luck!
SGH-T959 ICS Passion 10.6
papa.steve
Check the setting that enables/disables this. There is an option to leave the screen on while charging. Settings/applications/developement. Uncheck stay awake..
papa.steve said:
Foodil,
I had this problem way back when I was on one of the MIUI roms.
My fix: reboot to recovery and fix permissions. If this doesn't work then...
backup rom and SMS/MMS
reboot to recovery
nandroid backup (advanced)
wipe dalvick cache and wipe cache
format system
reflash rom
fix permissions
reboot system.
Good luck!
SGH-T959 ICS Passion 10.6
papa.steve
Click to expand...
Click to collapse
Thankyou.
i have tried your suggestion
at first fix permission not works, so i reflash the rom following the suggestion apporach ( i can't find nandroid backup (advanced) in the cwm , so i skipped it)
however, this time the mobile phone will turn on (not just screen, it will just boot and enter the android system) when i charging..
so i try install another rom (passion v10.6) . The problem sloved , but i think this rom is worse than the onecomic one . It consume more battery and ram.
So now i will flash back to onecomic one to see what will happen. It is just tedious work.
thanks, eweo911
That item is unchecked but the phone screen still keeping on.
This problem seems not that simple
foodil said:
thanks, eweo911
That item is unchecked but the phone screen still keeping on.
This problem seems not that simple
Click to expand...
Click to collapse
More than likely you can modify a file to fix that. Now the question is what file and what to change.
It seems some of the user using that rom have the same problem.
Just wait for the next release
thanks.
Hi,
I have x10 mini pro (u20). I installed successfully minicm10 and it works fine. I am trying to downgrade it back to mincm7.I tried to two different processes (with seus and with flashtools) but both fail:
1. With repair/update with seus.
I follow the instructions. When my phone is in flash mode, seus starts to download but then I get a message saying: "there is no software available for the phone". "sony update engine doe's have software available for the phone".
2. I tried to just to flash nAa kernel 14 or stock kerne but then the phone is hang when the logo apears (nAa or 'sony ericsson') and I connot enter to CWM recovery.
I search for a solution here in the Forum, I read many instructions, but I did not find a solution for this problem. I hope someone here can provide me with the solution. At the moment my phone works well with minicm10.
Thanks in advance
Did you do the uninstall wipes before flashing nAa-14? Format /system /data and /cache in JB recovery before flashing nAa-14
X10man
Sent from my U20i using xda premium
Downgrade from MiniCM10
Hi sason70,
I had a similar problem with my x10 mini pro. When I tried going back to MiniCM7, I tried using Flashtool for nAa 14 kernel. It completed fine, but on reboot, it hung on nAa logo. I tried with nAa 13, nAa 12 kernels, but still got stuck with the logo.
Then I tried a different approach. I re-flashed nAa jb kernel again.
On reboot, I got back to JB (so I knew how to get back to at least a working phone).
On next reboot, I pressed Back hardware button and entered recovery.
Here I did Factory reset, cleared Dalvik cache (didn't know if it was required), formatted /system, /data.
Next I applied the MiniCM7 zip file and the gapps for it from SD card.
I wanted to poweroff, but there is only a reboot option. So I removed the battery after selecting reboot (and when the screen went blank).
Next, I used Flashtool to put nAa 14 kernel.
On reboot this time, it went to first welcome screen.
Of course, I went back and restored a pre-JB backup and got my phone working as before (call log and all).
I hope that helps.
Nandan
sason70 said:
Hi,
I have x10 mini pro (u20). I installed successfully minicm10 and it works fine. I am trying to downgrade it back to mincm7.I tried to two different processes (with seus and with flashtools) but both fail:
1. With repair/update with seus.
I follow the instructions. When my phone is in flash mode, seus starts to download but then I get a message saying: "there is no software available for the phone". "sony update engine doe's have software available for the phone".
2. I tried to just to flash nAa kernel 14 or stock kerne but then the phone is hang when the logo apears (nAa or 'sony ericsson') and I connot enter to CWM recovery.
I search for a solution here in the Forum, I read many instructions, but I did not find a solution for this problem. I hope someone here can provide me with the solution. At the moment my phone works well with minicm10.
Thanks in advance
Click to expand...
Click to collapse
Thank you for the replies. I appreciate it.
I made a factory reset, wipe all data and cache. I flashed nAa 14 and I was able to go the CWM. But I still have problem to install Minicm7: The installation starts fine, but when it reaches to wipings/system stage, the process stops to advance when it is around 80%.
What I am doing wrong now?
sason70 said:
Thank you for the replies. I appreciate it.
I made a factory reset, wipe all data and cache. I flashed nAa 14 and I was able to go the CWM. But I still have problem to install Minicm7: The installation starts fine, but when it reaches to wipings/system stage, the process stops to advance when it is around 80%.
What I am doing wrong now?
Click to expand...
Click to collapse
You need to re-partition the internal storage again to their original sizes.
Boot into CWM - Mounts and Storage and do:
Format /system
Format /data
Format /cache
They got resized with JB and nAa-14 will restore their original sizes again so you can flash MiniCM7
:victory:
Thank you very much.
Now everything is in order (I hope...)
how about the x10 mini? the battery isn't removable...
how to go to the flashmode?
leboxus said:
how about the x10 mini? the battery isn't removable...
how to go to the flashmode?
Click to expand...
Click to collapse
Plug your phone to a computer, strat flashing. It will ask you to get into flashmode. Then, with cable still plugged, do a hard reset by holding shutdown and home (middle) buttons at once. After some time, LED will turn on green and it's in flashmode. If it gets out of flashmode fast, then just do an extra hard reset when it just got into flashmode, i succeeded to repair my e10i this way.
nandanlbhat said:
Hi sason70,
I had a similar problem with my x10 mini pro. When I tried going back to MiniCM7, I tried using Flashtool for nAa 14 kernel. It completed fine, but on reboot, it hung on nAa logo. I tried with nAa 13, nAa 12 kernels, but still got stuck with the logo.
Then I tried a different approach. I re-flashed nAa jb kernel again.
On reboot, I got back to JB (so I knew how to get back to at least a working phone).
On next reboot, I pressed Back hardware button and entered recovery.
Here I did Factory reset, cleared Dalvik cache (didn't know if it was required), formatted /system, /data.
Next I applied the MiniCM7 zip file and the gapps for it from SD card.
I wanted to poweroff, but there is only a reboot option. So I removed the battery after selecting reboot (and when the screen went blank).
Next, I used Flashtool to put nAa 14 kernel.
On reboot this time, it went to first welcome screen.
Of course, I went back and restored a pre-JB backup and got my phone working as before (call log and all).
I hope that helps.
Nandan
Click to expand...
Click to collapse
Thanks dude. that worked like a charm. now got wifi error issues... i guess its just a kernel problem. should work it out soon.
Thanks again.
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
draxx318is said:
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
Click to expand...
Click to collapse
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
kunmii said:
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
Click to expand...
Click to collapse
It worked! big thanks!!!