Hello everyone!
I'm from Brasil and I bought a GT-S5830L.
I didn´t knew that it, from stock, does not support the 3G frequencies from my country.
I've read that you can change this maybe from a firmware change or something.
I had a bad experience hacking other Android phone and I don't want to mess this up.
Can someone guide me through this?
I've read quite a lot but I'm sure I didn't get ir right!
Is there any Brasilian here to help me? I can´t stand connection on 2G only!
Sorry for this newbie post, but we gotta start somewhere!
I'm not sure you can change the frequency. Maybe. Info on frequencies on the 5830x are available in the following thread:
http://forum.xda-developers.com/showthread.php?t=1145939
Sent from my GT-S5830 using XDA App
For what I've been searching, if I change my firmware to one that does support the frequencies used in Brasil, my 3G will work.
I'm searching for some answers now 'cause I don't wanna brick this cellphone.
What frequencies do you want to use?
I'm from Brazil and I am going through the same problem. The frequency used here is 3g 850/2100, and the course operator operates on 850 and 2100MHz operators in the other. As the ace s5830L has 850/1900 3G frequencies, the only carrier that would work on 3G operator course. How not intend to change carriers'm looking for a solution that makes our ace works in frequency 2100MHz. I do not know if this would be solved with firmware version 2.3.4 installed pq of living (s5830B) and yet the 3g continued in the same way. Anyway, I am also looking for a solution to this problem, please post who you feel here.
Portugues:
Eu também sou do Brasil e estou passando pelo mesmo problema. A frequencia utilizada aqui é 3g 850/2100, sendo que a operadora Claro opera em 850 e as demais operadoras em 2100mhz. Como o ace s5830L tem frequencia 3g 850/1900, a unica operadora que funcionaria em 3g seria a operadora claro. Como não pretendo mudar de operadora estou a procura de alguma solução que faça nosso ace funcionar tambem na frequencia 2100mhz. Não sei se isso seria resolvido com firmware pq instalei a versão 2.3.4 da vivo (s5830B) e mesmo assim o 3g continuou da mesma forma. Enfim, também estou a procura de uma solução pra esse problema, quem achar favor postar aqui.
Ok guys, you're looking at it backwards. You have to choose the software (firmware) that matches your hardware (phone version).
The supported frequencies of the phone are based on the radio hardware that it has, this cannot be changed by the firmware.
The only way that you will be able to use both 850 and 2100 is by buying the S5830B phone version.
That's a shame!
I guess I'll have to settle with 2g connections only.
I was hoping that this firmware change would help me.
Related
Hello,
I have a tablet version 2.2 android model LY-F526 (N706A). When you connect a 3G modem Huawei the tablet through programs of self APN setting provider can properly detect the SIM card I'm using the modem. He also, through programs can inform me of the RF signal network that the modem is receiving.
However, it does not ever connect. What may be missing?
In official settings it only has the Android:
Mobile Networks
data Enabled
Auto connect
Nothing More.
The ROM I am using is 829, last available for him.
http://www.chinadigitalcomm.com/post21652.html
Portuguese:
Possuo um tablet android versão 2.2 modelo LY-F526 (N706A). Ao conectar um modem 3G Huawei o tablet através de programas de auto configuração de APN consegue detectar corretamente o provedor do cartão SIM que estou usando no modem. Ele tambem, atraves de programas consegue me informar o sinal RF da rede que o modem está recebendo.
Porem, ele não conectar nunca. O que pode estar faltando ?
Nas configurações oficiais do Android ele só tem :
Redes Móveis
Dados Ativados
Auto connect
Nada Mais.
A ROM que estou usando é a 829 , ultima disponivel para ele neste forum:
http://www.chinadigitalcomm.com/post21652.html
I need help, in Brazil, the frequency is 850/1900/2100MHz 3G and
[ROM] MiniCM7-2.1.9 [02/11/12] Gingerbread 2.3.7/CM7.2 does not allow to connect on 3G network in the frequency of 850 MHz EDGE only ...
This ROM works only on 900/2100 3G network ... someone could help?
Oi Cara,
What network are you using? Also, what model phone do you have? Mini pro, or regular mini?
I'm using claro, Vivo and Oi, no problems with 3G or normal on x10mini.
I'll test TIM with my wifes tomorrow and see if it's ok
Abs
I'm using the network vivo, my phone model is the x10 mini pro, what happens is, in my region the frequency is 850 MHz 3G, and it seems that the device only gets EDGE with this often when I switch city where the 3G is 2100 mhz .. operate normally, the problem is this, but only 3G takes on the frequency 900/1900/2100, 3G does not work at 850 mhz
Estou usando a rede da vivo , meu modelo de celular é o x10 mini pro , o que acontece é , na minha região a frequência 850 mhz é a 3G , e parece que o aparelho só pega EDGE com essa frequencia, quando eu mudo de cidade onde o 3G é 2100 mhz .. funciona normalmente, o problema é esse , 3G pega mas so na frequencia 900/1900/2100 , não funciona 3G em 850 mhz
reidotero said:
I'm using the network vivo, my phone model is the x10 mini pro, what happens is, in my region the frequency is 850 MHz 3G, and it seems that the device only gets EDGE with this often when I switch city where the 3G is 2100 mhz .. operate normally, the problem is this, but only 3G takes on the frequency 900/1900/2100, 3G does not work at 850 mhz
Estou usando a rede da vivo , meu modelo de celular é o x10 mini pro , o que acontece é , na minha região a frequência 850 mhz é a 3G , e parece que o aparelho só pega EDGE com essa frequencia, quando eu mudo de cidade onde o 3G é 2100 mhz .. funciona normalmente, o problema é esse , 3G pega mas so na frequencia 900/1900/2100 , não funciona 3G em 850 mhz
Click to expand...
Click to collapse
I only have an 10 mini (without keyboard) but just from looking at your phone specs, you might not be able to switch like this. You might be able to change your Build Prop file to change your phpne from an a model to an I model, or vice versa.
I'll try to dig up some more info!!
Hi friends,
I have a S5830L and S5830M
I've tried different ROMs I've tried changing the modem, but only these two models are on edge, do not enter into TIM's 3G (2100 MHz) in any way.
These devices have different hardware than the S5830B?
The frequency 3g is determined via hardware?
There is a possibility to operate the 3g (2100 MHz)?
Thank you !
---------------------------------------------------------------------------
Portugues:
Eu tenho 2 aparelhos um S5830L e outro S5830M
Eu já tentei varias Roms, eu já tentei trocar o modem, mas esses dois modelos só ficam em edge, não entra em 3g da TIM (2100 Mhz) de jeito nenhum.
Estes aparelhos tem hardware diferente do S5830B ?
A frequencia 3g é determinada via hardware ?
Existe a possibilidade de fazer funcionar o 3g (2100 Mhz) ?
Obrigado
Don't work on any model (M or L), limitation of Hardware
On this two, the HW supports 3G on frequency of 850/1900 and brazilian 3G works on 2100 MHz
Sent from my GT-S5830 using Tapatalk
I have got a Galaxy ace and i would like to know if it will work in Brazil, with claro or tim there?
Thank you
I'm using baseband S5830BVJKP2.
rodpat said:
I have got a Galaxy ace and i would like to know if it will work in Brazil, with claro or tim there?
Thank you
Click to expand...
Click to collapse
Whats the model?
S5830B?
Sent from my GT-S5830 using Tapatalk
So is it impossible to use 3g frequency even with custom roms? I just bought a S5380m model to use it with 3g...
=(
(~EN)
Hey,
I have an Atrix 4G from AT&T (and a Brazilian one as well, in witch I haven't tried the procedure yet) and I installed the CM 10 in it. But I am having a lot of problems with the camera (slow movie and camera stops all the time), with the fingertip, and sometimes the mobile gets really hot. So, I am a bit tired about test different ROMs and I would like to put the original one (motoblur) back. I got this one that is supposed to be the official one by AT&T (is it correct?)
<1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012>
but all the time that I try to install, the installation abort by itself and I have no idea why. I can install all the CMs but I can't install the olympus.
Does someone have the original ROM or knows why I am having this problem? I've rooted my MB860 and I am installing from the SDCard. Before installing, I am doing the full wipe (include cache and anything else).
Thank you
(PT-BR)
Olá,
Eu tenho um atrix 4g da AT&T (e um brasileiro que eu ainda não tentei o procedimento) e eu instalei o CM 10 nele. Estou tendo vários problemas, principalmente com a câmera, leitor de impressão digital, aquecimento, etc. Cansei dessas coisas e quero o Motoblur novamente, ainda que seja mais lento. Eu baixei uma ROM que, aparentemente, é a oficial da AT&T (cujo nome está descrito acima). O meu problema é que eu tento instalar essa ROM e a instalação para por si só.
Alguém sabe o porquê deste problema e se aquela ROM é mesmo a oficial?
Eu estou instalando pelo sdcard e antes eu faço full wipe e limpo tudo, inclusive a cache.
Obrigado
thats a sbf file. if you're trying to flash it via cwm, you don't belong using it. go find a fruitcake rom, much safer for someone who thinks sbfs are meant for cwm flashing.
not trying to sound rude, but giving advice to keep you from destroying your device.
Sent from my MB886 using xda app-developers app
marcelomirbas said:
(~EN)
Hey,
I have an Atrix 4G from AT&T (and a Brazilian one as well, in witch I haven't tried the procedure yet) and I installed the CM 10 in it. But I am having a lot of problems with the camera (slow movie and camera stops all the time), with the fingertip, and sometimes the mobile gets really hot. So, I am a bit tired about test different ROMs and I would like to put the original one (motoblur) back. I got this one that is supposed to be the official one by AT&T (is it correct?)
<1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012>
but all the time that I try to install, the installation abort by itself and I have no idea why. I can install all the CMs but I can't install the olympus.
Does someone have the original ROM or knows why I am having this problem? I've rooted my MB860 and I am installing from the SDCard. Before installing, I am doing the full wipe (include cache and anything else).
Thank you
(PT-BR)
Olá,
Eu tenho um atrix 4g da AT&T (e um brasileiro que eu ainda não tentei o procedimento) e eu instalei o CM 10 nele. Estou tendo vários problemas, principalmente com a câmera, leitor de impressão digital, aquecimento, etc. Cansei dessas coisas e quero o Motoblur novamente, ainda que seja mais lento. Eu baixei uma ROM que, aparentemente, é a oficial da AT&T (cujo nome está descrito acima). O meu problema é que eu tento instalar essa ROM e a instalação para por si só.
Alguém sabe o porquê deste problema e se aquela ROM é mesmo a oficial?
Eu estou instalando pelo sdcard e antes eu faço full wipe e limpo tudo, inclusive a cache.
Obrigado
Click to expand...
Click to collapse
Evite ao máximo flashear sbf no atrix da AT&T, pois pode dar hard-brick, use os fruitcakes (zips com a rom oficial). Já no brasileiro, use o rsd lite e flasheie o 2.3.6 oficial do brasil.
Try to not flash sbf on AT&T Atrix, because it can hard brick, use the fruitcakes instead (zips with official rom). On the brazilian atrix, use the rsd lite and flash the brazil official 2.3.6.
LimaBEERRE said:
Evite ao máximo flashear sbf no atrix da AT&T, pois pode dar hard-brick, use os fruitcakes (zips com a rom oficial). Já no brasileiro, use o rsd lite e flasheie o 2.3.6 oficial do brasil.
Try to not flash sbf on AT&T Atrix, because it can hard brick, use the fruitcakes instead (zips with official rom). On the brazilian atrix, use the rsd lite and flash the brazil official 2.3.6.
Click to expand...
Click to collapse
I've also tried to use the .zip file. But I've gotten the same problem. But, does is change, even if inside the .zip package there is a .sbf? Does someone have a link for the download of that (fruitcakes and brazilians official roms as well)? I tried on the motorola's webpage but I couldn't find anything.
Eu tenho tentado com os .zip também mas tenho sempre o mesmo problema citado. Mas existe alguma diferença, mesmo havendo um arquivo .sbf dentro do pacote zip? Alguém teria o link para baixar as rooms oficiais, tanto a da AT&T (fruitcakes, como informado) quanto as brasileiras?
Thanks
Obrigado
das8nt.com/downloads
Sent from my MB886 using xda app-developers app
I have accidentally flashed the wrong retail version, getting the xt1023 us version and cant use mobile network, and now i want to get the 4.4.4 stock firmware!
Glad if someone helps! :fingers-crossed:
i find here
link: https://mega.co.nz/#!AFhBgQLb!TAB0b-uzxsezeiRA3vZJ9Wfh5BUJne2xa8008qBU7ng
Não deu certo, tõ com o mesmo problema..não conecta mais tanto por wi-fi quanto 3G
Didnt work, i have the same problem
Na real meu celular foi comprado em Boston, alguém tem a stock USA?
my phone was buyed in Boston, someone had the US tosck 4.4.4?
122393 said:
Na real meu celular foi comprado em Boston, alguém tem a stock USA?
my phone was buyed in Boston, someone had the US tosck 4.4.4?
Click to expand...
Click to collapse
Please use english in forums, even if 50% in this sub-forum can understand you, this still is a international forum.
Have you tried this link?
http://sbf.droid-developers.org/phone.php?device=34
This thread has some information about too.
http://forum.xda-developers.com/showthread.php?t=2755857