Hi , can any1 pro can help a noob here....
i would like to root my device several times but failed and I m not sure where is the mistake while I had follow every steps teach from guide. Probably the step given is meant for P7510 and mine is P7500.... i found another root guide for P7500 which is very simple.
However, i had just update to the latest firmware today and I am not sure whether it will affect the whole rooting process...
does any1 can help a noob like me ?
Previous firmware : PDA:KG7 / PHONE: KG7 / CSC:KG3 (XME)
Latest firmware : PDA:KH4 / PHONE: KG1 / CSC:KH1 (XME)
Thank you.
It wont effect the rooting-process....its generic.
Just follow this procedure..
http://forum.xda-developers.com/showthread.php?t=1239185
Tksssss broo
Sorry for posting now, as this is quite an old thread.
I just wanted to ask you a question. Although you might achieve rooting on P7500 (following the Wifi-only instructions), were you still able to use the tablet's 3G functions?
Related
Hi, apologies if this has been covered but i couldn't find anything specific on this.
I got the ICS 4.0.3 upgrade yesterday for my S2, but my root access seems to have disappeared (upgrade was the official Voda UK upgrade via Kies). I originally followed the instructions on this forum to root the phone a few months ago. Titanium backup has stopped working
Presumably I need to re-root? If so, should I follow the identical instructions which I used for rooting my 2.3.5 version?
Cheers
Wat lp version is it? Just install cf root kernel and u should be fine. Or speed mod. Up to you.
Yes the same instructions, just make sure you root using a cf-root kernel for ICS
Hello to everybody.
First of all I need to tell that this is my first post in this huge community, so as you could understand I am so totally noob, besides I am from Latin America so excuse me for my bad english.
I have a S3 I9300 (bought on december 2012) and I am feeling worry about the sudden death issue, according with what I've read one of the possible causes of this issue might be the bootloader of the jelly bean, so they recommend to install old bootloader the one which came with the ICS 4.0.4, but doing this may brick my device.
So my question is does worth the risk to install this old bootloader? another thing is that I have the red exclamation mark when the phone is booting (I am currently using Sotmax v12 rom with Yank555 2.8f kernel).
And in case the answer is yes do someone has tutorials or video of how this should be done?
Thanks in advance for your help
See the post how to flash old bootloader right next to this post .
Question = Q&A please .
jje
JJEgan said:
See the post how to flash old bootloader right next to this post .
Question = Q&A please .
jje
Click to expand...
Click to collapse
Thank you for your response, I've read the thread you suggest and I still do not understand some aspects like:
1.- Do I need to be on 4.0.4 Stock to flash the bootloader?
2.- In order to flash the bootloader just need to place the ICS old bootloader XXALEF provided in the thread in the bootloader section in Odin 3? or is needed to do another procedure first? do I lost root?
I am sorry to bother you, but I want to be sure about what I am going to do before try to do it.
Thanks
I think do what you see in the other thread.
The trick is look for a country that has not gotten uodated to JB 4.1.2. Stuck at 4.1.1. DL the last 4.04 (ICS) of that country. Flash it via Odin. Then upon first boot (dont root in the mean time) let it update to 4.1.1 via the phone's OTA Software Update. This is the key part when a JB 4.1.1 Bootloader will be installed that will break the XXELLA bootloader's protection.
After that OTA update is finished (285 MB file) then you can flash that XXALEF ICS Bootloader through PC Odin.
Then do root or wahteva you want.
This is described in Dr Love's thread. I'd done this way.
Another way is this one.
thekoRngear said:
I think do what you see in the other thread.
The trick is look for a country that has not gotten uodated to JB 4.1.2. Stuck at 4.1.1. DL the last 4.04 (ICS) of that country. Flash it via Odin. Then upon first boot (dont root in the mean time) let it update to 4.1.1 via the phone's OTA Software Update. This is the key part when a JB 4.1.1 Bootloader will be installed that will break the XXELLA bootloader's protection.
After that OTA update is finished (285 MB file) then you can flash that XXALEF ICS Bootloader through PC Odin.
Then do root or wahteva you want.
This is described in Dr Love's thread. I'd done this way.
Another way is this one.
Click to expand...
Click to collapse
Thank you so much for your response. I will try the second method and see what happens.
Sorry for my persistence.
Now I understand almost every step on the procedure to downgrade the old bootloader, but one still question still remains do I need to be on 4.0.4 stock to downgrade or it does not matter what firmware I am using?
Thanks for your help
Hi
I seached alot before i posted this, so i hope someone can help me.
I have i9100 S2 with
PDA i9100BOLPM / i9100 BOLP7 / i9100TNLLP8 wich is branded by T-mobile Netherlands. ( ICS )
I want to flash JellyBean, now someone told me this I9100XWLSD_I9100XENLS1_XEN is safe for me to flash troug Odin.
(Q1) I wonder if this is true.
Than, because of the exploit in ICS i used the ExynosAbuse APK v1.40 to disable the exploit. I also rooted my phone.
In the App is this thing to unroot all, so:
(Q2) will this give a problem when flashing the above since i rooted before?
(Q3) Will i have to perform full wipe ( fact. reset) before i flash or will it be better to not?
I hope someone can give me an answer, i searched a lot, than i read diferent answers to same queastions all over....
Thank you for your time.
andreoide said:
Hi
I seached alot before i posted this, so i hope someone can help me.
I have i9100 S2 with
PDA i9100BOLPM / i9100 BOLP7 / i9100TNLLP8 wich is branded by T-mobile Netherlands. ( ICS )
I want to flash JellyBean, now someone told me this I9100XWLSD_I9100XENLS1_XEN is safe for me to flash troug Odin.
(Q1) I wonder if this is true.
Than, because of the exploit in ICS i used the ExynosAbuse APK v1.40 to disable the exploit. I also rooted my phone.
In the App is this thing to unroot all, so:
(Q2) will this give a problem when flashing the above since i rooted before?
(Q3) Will i have to perform full wipe ( fact. reset) before i flash or will it be better to not?
I hope someone can give me an answer, i searched a lot, than i read diferent answers to same queastions all over....
Thank you for your time.
Click to expand...
Click to collapse
This is you right now:
- rooted on branded ICS (4.0.3? 4.0.4? )
If on 4.0.4, I'm sure you read about brick bug.
want to flash JB? You can via odin / mobile odin.
wipes? not mandatory but you are flashing an unbranded ROM over a branded one...might be wise.
Best choice? Flash jb via mobile odin with wipes and EverRoot.
Again, if on 4.0.4...you know what to do (flash siyah, just in case).
That ROM you mentioned is safe to flash.
you might wanna read a couple of the official jb thread pages before attempting any of these.
Sent from the little guy
Ive recently updated my galaxy s blaze to 4.0.4 with firmware version UVMB1 and i really want to root my phone so i can delete the bloatware and flash some custom roms, my biggest issue is i cant seem to find a root guide that is compatible with my formware version.I came across a root guide that was for my phone, but it stated " Samsung Galaxy S Blaze 4g T769 root for ICS UVLH5 firmware." I was basically wondering if i used this guide, would i brick my or cause serious damage to my phone ? Please help me cause im DYING to root this phone, and if i cant use this guide, what guide could i use that would be compatible with my firmware version. Thanks!!!!!!!
chilife15 said:
Ive recently updated my galaxy s blaze to 4.0.4 with firmware version UVMB1 and i really want to root my phone so i can delete the bloatware and flash some custom roms, my biggest issue is i cant seem to find a root guide that is compatible with my formware version.I came across a root guide that was for my phone, but it stated " Samsung Galaxy S Blaze 4g T769 root for ICS UVLH5 firmware." I was basically wondering if i used this guide, would i brick my or cause serious damage to my phone ? Please help me cause im DYING to root this phone, and if i cant use this guide, what guide could i use that would be compatible with my firmware version. Thanks!!!!!!!
Click to expand...
Click to collapse
It works. Just did it. 4.0.4 is what's important there. Mine is brand new with uvmb1 & now it's rooted
hello guys (First know i was googling alot, and only after could find solution i came here).
now, my friend have Galaxy S1 phone, os on it is: 2.3.3, baseband version:i9000JIJV9 Build number: Gingerbread.JIJVG.
now i understand that the first step on do what i want is root the phone, my problem is to find the correct karnel for my version, all what i find is for android 2.3.4 and higher, and i am on 2.3.3, i was looking for samsung stock rom 2.3.4 or 5 to flash on my phone but didnt find any for my build number...
Anyone knows how i can root this 2.3.3 or how i can make safe update in my phone for 2.3.4 or higher???
thanks a head for all replies...